Material and mechanical factors:new strategy in cellular neurogenesis

Since damaged neural circuits are not generally self-recovered, developing methods to stimulate neurogenesis is critically required. Most studies have examined the effects of soluble pharma- cological factors on the cellular neurogenesis. On the other hand, it is now recognized that the other extracellular factors, including material and mechanical cues, also have a strong potential to induce cellular neurogenesis. This article will review recent data on the material （chemical patterning, micro/nano-topography, carbon nanotube, graphene） and mechanical （static cue from substrate stiffness, dynamic cue from stretch and flow shear） stimulations of cellular neuro- genesis. These approaches may provide new neural regenerative medicine protocols. Scaffolding material templates capable of triggering cellular neurogenesis can be explored in the presence of neurogenesis-stimulatory mechanical environments, and also with conventional soluble factors, to enhance axonal growth and neural network formation in neural tissue engineering.

Microthrombosis induced by mechanical factors and light-dye treatment

Introduction Thrombosis is the formation of a blood clot in a blood vessel. When thrombosis happens in the brain,it would cause stroke; when happens in the heart,it would cause heart attack. If a thrombus breaks and travels to the lung,it would

Loss Factors and their Effect on Resonance Peaks in Mechanical Systems

The loss factors and their effects on the magnitude and frequency of resonance peaks in various mechanical sys-tems are reviewed for acoustic,vibration,and vibration fatigue applications.The main trends and relationships were obtained for linear mechanical models with hysteresis damping.The well-known features(complex module of elasticity,total loss factor,etc.)are clarified for practical engineers and students,and new results are presented(in particular,for 2-DOF in-series models with hysteresis friction).The results are of both educational and prac-tical interest and may be applied for NVH analysis and testing,mechanical and aeromechanical design,and noise and vibration control in buildings.

Modeling and Analysis of Mechanical Quality Factor of the Resonator for Cylinder Vibratory Gyroscope

Mechanical Quality factor（Q factor） of the resonator is an important parameter for the cylinder vibratory gyroscope（CVG）. Traditional analytical methods mainly focus on a partial energy loss during the vibration process of the CVG resonator, thus are not accurate for the mechanical Q factor prediction. Therefore an integrated model including air damping loss, surface defect loss, support loss, thermoelastic damping loss and internal friction loss is proposed to obtain the mechanical Q factor of the CVG resonator. Based on structural dynamics and energy dissipation analysis, the contribution of each energy loss to the total mechanical Q factor is quantificationally analyzed. For the resonator with radius ranging from 10 mm to 20 mm, its mechanical Q factor is mainly related to the support loss, thermoelastic damping loss and internal friction loss, which are fundamentally determined by the geometric sizes and material properties of the resonator. In addition, resonators made of alloy 3J53 （Ni42CrTiA1）, with different sizes, were experimentally fabricated to test the mechanical Q factor. The theoretical model is well verified by the experimental data, thus provides an effective theoretical method to design and predict the mechanical Q factor of the CVG resonator.

Interaction of Mechanical and Electrochemical Factors duringCorrosion Fatigue of Fe-26Cr-1Mo Stainless Steel in 1M H_2SO_4 Solution

The cyclic plastic straining electrode technique has been used to investigate the transient electrochemical behaviour of Fe-26Cr1Mo stainless steel in 1M H2SO4 solution at a passive potential.The influence of plastic strain amplitude and plastic strain rate on the dissolution current response was analysed. The experimental results showed that the transient current was dependent on the competitive process of the surface film rupture and repassivation of the new surface. The high plastic strain amplitude and the high plastic strain rate caused a change of electrochemical activity of specimen surface. In the condition of low strain amplitude and strain rate, the characteristics of current response was mainly relative tp the process of new surface repassivation.The competition kinetics has been analysed through the comparison of plastic strain rate and repassivating rate

Mechanical Eye Trauma Epidemiology, Prognostic Factors, and Management Controversies—An Update

Purpose of Review: The management of eye injuries is both difficult and argumentative. This study attempts to highlight the management of ocular trauma using currently available information in the literature and author experience. This review presents a workable framework from the first presentation, epidemiology, classification, investigations, management principles, complications, prognostic factors, final visual outcome and management debates. Review Findings: Mechanical ocular trauma is a leading cause of monocular blindness and possible handicap worldwide. Among several classification systems, the most widely accepted is Birmingham Eye Trauma Terminology (BETT). Mechanical ocular trauma is a topic of unsolved controversy. Patching for corneal abrasion, paracentesis for hyphema, the timing of cataract surgery and intraocular lens implantation are all issues in anterior segment injuries. Regarding posterior segment controversies, the timing of vitrectomy, use of prophylactic cryotherapy, the necessity of intravitreal antibiotics in the absence of infection, the use of vitrectomy vs vitreous tap in traumatic endophthalmitis is the issues. The pediatric age group needs to be approached by a different protocol due to the risk of amblyopia, intraocular inflammation, and significant vitreoretinal adhesions. The various prognostic factors have a role in the final visual outcome. B scan is used to exclude R.D, Intraocular foreign body (IOFB), and vitreous haemorrhage in hazy media. Individual surgical strategies are used for every patient according to the classification and extent of the injuries. Conclusion: This article examines relevant evidence on the management challenges and controversies of mechanical trauma of the eye and offers treatment recommendations based on published research and the authors’ own experience.

Effect of Facet Displacement on Radiation Field and Its Application for Panel Adjustment of Large Reflector Antenna

Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and higher surface accuracy. However, low accuracy and low effi- ciency are the common disadvantages for traditional panel alignment and adjustment. In order to improve the surface accuracy of large reflector antenna, a new method is pre- sented to determinate panel adjustment values from far field pattern. Based on the method of Physical Optics （PO）, the effect of panel facet displacement on radiation field value is derived. Then the linear system is constructed between panel adjustment vector and far field pattern. Using the method of Singular Value Decomposition （SVD）, the adjustment value for all panel adjustors are obtained by solving the linear equations. An experiment is conducted on a 3.7 m reflector antenna with 12 segmented panels. The results of simulation and test are similar, which shows that the presented method is feasible. Moreover, thediscussion about validation shows that the method can be used for many cases of reflector shape. The proposed research provides the instruction to adjust surface panels efficiently and accurately.

Mechanical quality factor of high-overtone bulk acoustic resonator

Mechanical quality factor Qm is a key characteristic parameter of High-overtone bulk acoustic resonator（HBAR）. The effects of structure parameter（thickness） and perfor？mance parameters（characteristic impedance and mechanical attenuation factor） of substrate,piezoelectric film and electrode constituting HBAR on Qm are carried out. The relationships between Qm and these parameters are obtained by a lumped parameter equivalent circuit instead of distributed parameter equivalent circuit near the resonance frequency, and the an？alytical expressions oi Qm are given. The results show that Qm increases non-monotonically with the continuous increase of the substrate thickness for HBAR with certain piezoelectric film thickness, and it approaches to the substrate material mechanical quality factor as the substrate thickness is large. Qm decreases wavily with the continuous increase of the piezoelectric film thickness for HBAR with certain substrate thickness. Sapphire and YAG with low mechanical loss are appropriate as the substrate to get a larger Qm- The electrode loss must be considered since it can reduce Qm- Compared with Au electrode, A1 electrode with lower loss can obtain higher Qm when the appropriate electrode thickness is selected. In addition, Qm decreases with the increase of frequency. These results provide the theoretical basis for optimizing the parameters of HBAR and show that trade-oflFs between Qm and must be considered in the design because their changes are often inconsistent.

Expression of ectonucleotide pyrophosphatase-1 in end-plate chondrocytes with transforming growth factor beta 1 siRNA interference by cyclic mechanical tension

Background Ectonucleotide pyrophosphatase/phosphodiesterase （ENPP）-I is a membrane-bound protein that catalyzes the hydrolysis of extracellular nucleoside triphosphates to monophosphate and extracellular inorganic pyrophosphate （ePPi）. Mechanical stimulation regulates ENPP-1 expression. This study sought to investigate the changes in ENPP-1 expression after stimulation using cyclic mechanical tension （CMT）.

Origin of high mechanical quality factor in CuO-doped （K, Na）NbO3-based ceramics

The origin of a high mechanical quality in CuO-doped （K, Na）NbO3-based ceramics is addressed by considering the correlations between the lattice positions of Cu ions and the hardening effect in K0.48Na0.52＋xNbO3-0.01CuO ceramics. The Cu ions simultaneously occupy K/Na and Nb sites of these ceramics with x = 0 and 0.02, only occupy the K/Na site of the ceramics with x= -0.02, and mostly form a secondary phase of the ceramics with x = -0.05. The Cu ions lead to the hardening of ceramics with an increase of Ec and Qm by only occupying the K/Na site, together with the formation of double hysteresis loops in un-poled compositions. A defect model is proposed to illuminate the origin of a high Qm value, that is, the domain stabilization is dominated by the content of relatively mobile O2- ions in the ceramics, which has a weak bonding with CUK/Na defects.

A Preliminary Study on Principle of Etiology Mechanism

Based on the inspiration from Hetu and Luoshu,a principle diagram of pathogenicity of pathogenic factors was established.Accordingly,the inner correlations between pathogenic factor type and biological factors,and between pathogenic factors and host were analyzed.Mechanism of pathogenesis was discussed with five representative cases.The result indicated that effect of biological factors on host could be proved only with the performance of internalization conditions of biological factor and host.The reciprocal transformation between biological factors and pathogenic factors was decided by interaction and state of co-existed factors and host.The results suggested that it is a better and attractive choice to regulate and optimize the host’s state in practice than direct elimination of pathogens with antibiotics.

Outstanding electromechanical performance in piezoelectric ceramics via synergistic effects of defect engineering and domain miniaturization

Piezoelectric ceramics with high mechanical quality factor Q_(m) and large piezoelectric coefficient d_(33) are urgently required for advanced piezoelectric applications.However,obtaining both of these prop-erties simultaneously remains a difficult challenge due to their mutually restrictive relationship.Here 0.5Pb(Ni_(1/3)Nb_(2/3))O_(3)-0.5Pb(Zr_(0.3)Ti_(0.7))O_(3) piezoceramic with tetragonal(T)-rich MPB is designed as a matrix to construct the defect engineering by doping low-valent Mn ions.The strong coupling of defect dipole and T-rich phase can effectively hinder the rotation of P_(s),restrict domain wall motion and improve Q_(m).At the same time,the substituted Mn ions will introduce local random field,destroying the long-range or-dering of ferroelectric domain and reducing domain size.The miniaturized domain structure can increase poling efficiency and inhibit the reduction of d_(33).Guided by this strategy,Q_(m) has increased by more than 10 times and d_(33) has only decreased by about 25%.The optimized electromechanical performance with Q_(m)=822,d_(33)=502 pC/N,k_(p)=0.55 and tanδ=0.0069 can be obtained in the present study.

Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula

Sealing clearance is a key factor for a metal rubber seal＇s sealability. The expansion coef- ficient and expansion deformation in the radial direction of metal rubber have been obtained through a thermal expansion experiment of metal rubber. The influence of the elastic modulus to the sealing clearance has been analyzed theoretically. By combining the temperature and elasticity factors of metal rubber with the elastic mechanics theory, the calculation formula of the sealing clearance has been derived, and the values of the sealing clearance and the leakage rate in certain working conditions have been calculated. Experimental results are consistent with calculation results in a high degree. The calculation formula of the sealing clearance can explain the influences of the temperature and elastic modulus factors of metal rubber on the sealing clearance. It can pro- vide guidance for the study of sealing mechanism of metal rubber seals.

Molecular mechanism of microRNA125 regulating human coagulation factor IX gene with nonsense mutation

Objective To construct human coagulation factorⅨmini-gene(Mini-h F9)and some nonsense mutants,detect the levels of the Mini-h F9 mRNA,and analyze the molecular mechanism of microRNA125 regulating F9gene with nonsense mutation.Methods Three nonsense mutants were obtained by using PCR mutagenesis to ana-

Investigation of Mechanism of Premature Ovarian Failure Regulation by Kidney-tonifying Herbs and Liver-clearing Herbs in Dingjing Decoction

Objective To investigate the mechanisms through which kidney-tonifying herbs（KTHs） and liver-clearing herbs（LCHs） in Dingjing Decoction（DJD） regulate premature ovarian failure（POF）. Methods One hundred and fifty Sprague-Dawley rats were randomly divided into five groups such as control, model, KTHs, LCHs, and DJD groups. POF-related biological molecules were examined. Factor analysis was performed to investigate the regulatory networks and key biomolecules involved in mediating POF after treatment with KTHs and LCHs. Results The master regulatory factors in the reproductive endocrine network associated with KTHs intervention included four molecules in the pituitary-ovarian axis, cortisol（CORT） in the target gland of pituitary-adrenal axis, and some molecules in the hypothalamus. In contrast, the master regulatory factors associated with LCHs intervention included four molecules in the pituitary-ovarian axis and some molecules in the hypothalamus; No biomolecules in the pituitary-adrenal axis were involved in the LCH-mediated mechanisms.Gonadotropin-releasing hormone（Gn RH）, which was identified as a common biological molecule in the hypothalamus, was involved in regulating the reproductive endocrine network in association with KTHs intervention. Conclusion KTHs directly regulates biological molecules in the pituitary-adrenal axis and indirectly regulates those in the pituitary-adrenal axis through the hypothalamus, while the LCHs only exert its effects indirectly. Gn RH is the key biological molecule associated with KTHs intervention.