Mechanical forces in the tumor microenvironment(TME)are associated with tumor growth,proliferation,and drug resistance.Strong mechanical forces in tumors alter the metabolism and behavior of cancer cells,thus promotin...Mechanical forces in the tumor microenvironment(TME)are associated with tumor growth,proliferation,and drug resistance.Strong mechanical forces in tumors alter the metabolism and behavior of cancer cells,thus promoting tumor progression and metastasis.Mechanical signals are transformed into biochemical signals,which activate tumorigenic signaling pathways through mechanical transduction.Cancer immunotherapy has recently made exciting progress,ushering in a new era of“chemo-free”treatments.However,immunotherapy has not achieved satisfactory results in a variety of tumors,because of the complex tumor microenvironment.Herein,we discuss the effects of mechanical forces on the tumor immune microenvironment and highlight emerging therapeutic strategies for targeting mechanical forces in immunotherapy.展开更多
To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could...To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could be used to accelerate bone formation in a bony defect in vivo. The calcium sulfate cement was implanted into the left distal femoral epiphyses surgically in 16 rats. The half of rats were subjected to external mechanical force via treadmill exercise, the exercise started at day 7 postoperatively for 30 consecutive days and at a constant speed 8 m·min-1 for 45 min·day-1, while the rest served as a control. The rats were scanned four times longitudinally after surgery using microcomputed tomography and newly formed bone was evaluated. After sacrificing, the femurs had biomechanical test of three-point bending and histological analysis. The results showed that bone healing under mechanical force were better than the control with residual defect areas of 0.64±0.19 mm2 and 1.78±0.39 mm2(P〈0.001), and the ultimate loads to failure under mechanical force were 69.56±4.74 N, stronger than the control with ultimate loads to failure of 59.17±7.48 N(P=0.039). This suggests that the mechanical force might be used to improve new bone formation and potentially offer a clinical strategy to accelerate bone healing.展开更多
The switching process of ferroelectric thin films in electronic devices is one of the most important requirements for their application. Especially for the different external fields acting on the film surface, the mec...The switching process of ferroelectric thin films in electronic devices is one of the most important requirements for their application. Especially for the different external fields acting on the film surface, the mechanism of domain switching is more complicated. Here we observe the nanoscale domain switchings of Bi3.15Eu0.85Ti3O12 thin film under different mechanical forces at a fast scan rate. As the force increases from initial state to 247.5 n N, the original bright or grey contrasts within the selected grains are all changed into dark contrasts corresponding to the polarization vectors reversed from the up state to the down state, except for the clusters. As the mechanical force increases to 495 n N, the color contrasts in all of the selected grains further turn into grey contrasts and some are even changed into grey contrasts completely showing the typical 90° domain switching. When another stronger loading force 742.5 n N is applied, the phase image becomes unclear and it indicates that the piezoelectric signal can be suppressed under a sufficiently high force, which is coincident with previous experimental results. Furthermore, we adopt the domain switching criterion from the perspective of equilibrium state free energy of ferroelectric nanodomain to explain the mechanisms of force-generated domain switchings.展开更多
BK channels are widely expressed in both excitable and non-excitable cells and known to be involved in many physiological processes,such as vascular smooth tone regulation,neuronal firing and endocrine cell secretion[...BK channels are widely expressed in both excitable and non-excitable cells and known to be involved in many physiological processes,such as vascular smooth tone regulation,neuronal firing and endocrine cell secretion[1].Recently, the BK channels have展开更多
The vibration response formulas of the mechanical system under the affect of thevari-frequency exciting force are deduced. It is proved by the theoretical analysis and experimentalresults that the vibration response a...The vibration response formulas of the mechanical system under the affect of thevari-frequency exciting force are deduced. It is proved by the theoretical analysis and experimentalresults that the vibration response amplitude of the mechanical system under the affect of thevari-frequency exciting force is far smaller than that under the affect of the constant frequency exciting force on condition that the exciting force amplitudes are just the same;while the vari-fre-quency rate a increases to 5 Hz per second the vibration amplitude will decrease to 10% only as lowas that under the affect of the constant frequency exciting force. All these conclusions will be of significance for revealing the mechanism of suppressing chatter in van-speed cutting and analyzing theexperimental results of sine-wave scanning exciting test.展开更多
Cross-talk between tumor cells and mechanical stress in the tumor microenvironment has been shown to be involved in carcinogenesis.High mechanical stress in tumors can alter the metabolism and behaviors of cancer cell...Cross-talk between tumor cells and mechanical stress in the tumor microenvironment has been shown to be involved in carcinogenesis.High mechanical stress in tumors can alter the metabolism and behaviors of cancer cells and cause cancer cells to attain cancer stem-like cell properties,thus driving tumor progression and promoting metastasis.The mechanical signal is converted into a biochemical signal that activates tumorigenic signaling pathways through mechanotransduction.Herein,we describe the physical changes occurring during reprogramming of cancer cell metabolism,which regulate cancer stem cell functions and promote tumor progression and aggression.Furthermore,we highlight emerging therapeutic strategies targeting mechanotransduction signaling pathways.展开更多
According to the design specifications,the construction of extended piles involves traversing the tunnel’s upper region and extending to the underlying rock layer.To address this challenge,a subterranean transfer str...According to the design specifications,the construction of extended piles involves traversing the tunnel’s upper region and extending to the underlying rock layer.To address this challenge,a subterranean transfer structure spanning multiple subway tunnels was proposed.Deliberating on the function of piles in the transfer structure as springs with axial and bending stiffness,and taking into account the force balance and deformation coordination conditions of beams and plates within the transfer structure,we established a simplified mechanical model that incorporates soil stratification by combining it with the Winkler elastic foundation beam model.The resolved established simplifiedmechanicalmodel employed finite difference technology and the Newton-Simpsonmethod,elucidating the mechanical mechanism of the transfer structure.The research findings suggest that the load carried by the upper structural columns can be transferred to the pile foundation beneath the beams through the transfer structure,subsequently reaching the deep soil layer and ensuring minimal impact on adjacent tunnels.The established simplified analysis method can be used for stress analysis of the transfer structure,concurrently considering soil stratification,pile foundation behavior,and plate action.The pile length,pile section size,and beam section size within the transfer structure should account for the characteristics of the upper load,ensuring an even distribution of the beam bending moment.展开更多
Adaptive gaits for legged robots often requires force sensors installed on foot-tips,however impact,temperature or humidity can affect or even damage those sensors.Efforts have been made to realize indirect force esti...Adaptive gaits for legged robots often requires force sensors installed on foot-tips,however impact,temperature or humidity can affect or even damage those sensors.Efforts have been made to realize indirect force estimation on the legged robots using leg structures based on planar mechanisms.Robot Octopus III is a six-legged robot using spatial parallel mechanism(UP-2UPS) legs.This paper proposed a novel method to realize indirect force estimation on walking robot based on a spatial parallel mechanism.The direct kinematics model and the inverse kinematics model are established.The force Jacobian matrix is derived based on the kinematics model.Thus,the indirect force estimation model is established.Then,the relation between the output torques of the three motors installed on one leg to the external force exerted on the foot tip is described.Furthermore,an adaptive tripod static gait is designed.The robot alters its leg trajectory to step on obstacles by using the proposed adaptive gait.Both the indirect force estimation model and the adaptive gait are implemented and optimized in a real time control system.An experiment is carried out to validate the indirect force estimation model.The adaptive gait is tested in another experiment.Experiment results show that the robot can successfully step on a 0.2 m-high obstacle.This paper proposes a novel method to overcome obstacles for the six-legged robot using spatial parallel mechanism legs and to avoid installing the electric force sensors in harsh environment of the robot's foot tips.展开更多
In order to investigate the sealing performance variation resulted from the thermal deformation of the end faces, the equations to calculate the fluid film pressure distribution, the bearing force and the leakage rate...In order to investigate the sealing performance variation resulted from the thermal deformation of the end faces, the equations to calculate the fluid film pressure distribution, the bearing force and the leakage rate are derived, for the fluid film both in parallel gap and in wedgy gap. The geometrical parameters of the sealing members are optimized by means of heat transfer analysis and complex method. The analysis results indicate that the shallow spiral grooves can generate hydrodynamic pressure while the rotating ring rotates and the bearing force of the fluid film in spiral groove end faces is much larger than that in the flat end faces. The deformation increases the bearing force of the fluid film in flat end faces, but it decreases the hydrodynamic pressure of the fluid film in spiral groove end faces. The gap dimensions which determine the characteristics of the fluid film is obtained by coupling analysis of the frictional heat and the thermal deformation in consideration of the equilibrium condition of the bearing force and the closing force. For different gap dimensions, the relation- ship between the closing force and the leakage rate is also investigated, based on which the leakage rate can be controlled by adjusting the closing force.展开更多
wo different surface morphology characteristics of magnetron sputtered aluminumsilicon(Al-Si)alloy films deposited at 0 and 200℃ were observed by atomic force microscopy(AFM).One is irregularly shaped grains put togt...wo different surface morphology characteristics of magnetron sputtered aluminumsilicon(Al-Si)alloy films deposited at 0 and 200℃ were observed by atomic force microscopy(AFM).One is irregularly shaped grains put togther on a plane.The other is irregularly shaped grains Piled up in space. Nanometer-sized particles with heights from 1.6 to 2.9 nm were first observed. On the basis of these observations the growth mechanism of magnetron sputtered films is discussed.展开更多
Tissues are made up of cells and the extracellular matrix(ECM)which surrounds them.These cells and tissues are actively adaptable to enduring significant stress that occurs in daily life.This astonishing mechanical st...Tissues are made up of cells and the extracellular matrix(ECM)which surrounds them.These cells and tissues are actively adaptable to enduring significant stress that occurs in daily life.This astonishing mechanical stress develops due to the interaction between the live cells and the non-living ECM.Cells in the matrix microenvironment can sense the signals and forces produced and initiate a signaling cascade that plays a crucial role in the body’s normal functioning and influences various properties of the native cells,including growth,proliferation,and differentiation.However,the matrix’s characteristic features also impact the repair and regeneration of the damaged tissues.The current study reviewed how the cell-ECM interaction regulates cellular behavior and physicochemical properties.Herein,we have described the response of cells to mechanical stresses,the importance of substrate stiffness and geometry in tissue regeneration,and the development of scaffolds to mimic the nature of native ECM in 3D for tissue engineering applications has also been discussed.Finally,the study summarizes the conclusions and promising prospects based on the cell-ECM interplay.展开更多
Studies by many scientists show that Hebei, China is an area with strong correlation between the tidal force and the occurrences of major earthquakes, the Xingtai earthquake of 1966, the Hejian earthquake of 1967 and ...Studies by many scientists show that Hebei, China is an area with strong correlation between the tidal force and the occurrences of major earthquakes, the Xingtai earthquake of 1966, the Hejian earthquake of 1967 and the Tangshan earthquake of 1976 were triggered by the tidal force, in this paper the study on the common characteristics of their occurrence times confirms these facts. The computed times of maximum horizontal of the semi diurnal solid tide tidal force show that the occurrence times of the above mentioned earthquakes were close to the times of maximum horizontal tidal force of the semi diurnal solid tide at new moon or full moon. The Longyao earthquake of M =6.8, the Ningjin earthquake of M =7.2 and the Hejian earthquake of M =6.3 occurred tens of minutes after the maximum horizontal tidal force of the semi diurnal solid tides, and the Tangshan earthquake of M =7.8 occurred 16 minutes before the maximum horizontal tidal force. The tidal forces were directed to the west. This is their temporal characteristic. It is generally accepted that the 1969 Bohai earthquake of M =7.4 and the 1975 Haicheng earthquake were not triggered by the tidal force. These events did not show such characteristics. The temporal characteristics of the earthquakes indicate that the occurrences of these events were not random, but were controlled by the tidal force from the sun and the moon, and triggered by the tidal force. These facts agree with the triggering mechanism of the tidal force, are evidences of earthquakes triggered by tidal force.展开更多
The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that ...The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.展开更多
Based on the background of structural protection and Disaster Reduction Engineering, the dynamic behaviour and failure mechanism of restrained beams in portal steel frames in localised fire are investigated via experi...Based on the background of structural protection and Disaster Reduction Engineering, the dynamic behaviour and failure mechanism of restrained beams in portal steel frames in localised fire are investigated via experimental measurement and numerical simulation techniques. Comprehensive parametric studies are carried out to discuss the influence of end connection types, temperature, impact velocity,impact mass and span-to-depth ratio(SDR) on the dynamic response of the beams. The characteristics of deformation, internal force and energy distribution about the restrained beams and its joints are investigated. A temperature dependent criterion for evaluating the frame joint performance is proposed to measure the degree of performance degradation and impact resistance of the joint. The dynamic displacement amplification factor in different temperature environments are proposed for the different beam end constraint types and SDRs. Results of the experimental and numerical analysis show that the welded connection(WC) of three typical joint types is the strongest, and the extended endplate connection(EEC) is the weakest in terms of the impact resistance performance. With regard to the failure mode of the joint, the failure positions of the WC and the welded-bolted connection are located in the inner web of the column. Meanwhile, the EEC is located in the connection position between the beam and the endplate. Three different internal force stages and two obvious critical temperature boundaries of the restrained beams emerge with the increase in temperature, and they have significant characteristics in terms of deformation trend, internal force transfer and energy distribution. During the impact, a phenomenon known as “compression arch action” develops into “catenary action” with the increase in deflection in the frame beam mechanism.展开更多
Mechanotransduction,a conversion of mechanical forces into biochemical signals,is essential for human development and physiology.It is observable at all levels ranging from the whole body,organs,tissues,organelles dow...Mechanotransduction,a conversion of mechanical forces into biochemical signals,is essential for human development and physiology.It is observable at all levels ranging from the whole body,organs,tissues,organelles down to molecules.Dysregulation results in various diseases such as muscular dystrophies,hypertension-induced vascular and cardiac hypertrophy,altered bone repair and cell deaths.Since mechanotransduction occurs at nanoscale,nanosciences and applied nanotechnology are powerful for studying molecular mechanisms and pathways of mechanotransduction.Atomic force microscopy,magnetic and optical tweezers are commonly used for force measurement and manipulation at the single molecular level.Force is also used to control cells,topographically and mechanically by specific types of nano materials for tissue engineering.Mechanotransduction research will become increasingly important as a sub-discipline under nanomedicine.Here we review nanotechnology approaches using force measurements and manipulations at the molecular and cellular levels during mechanotransduction,which has been increasingly play important role in the advancement of nanomedicine.展开更多
In this editorial,we discuss the remarkable role of physical energies in the control of cell signaling networks and in the specification of the architectural plan of both somatic and stem cells.In particular,we focus ...In this editorial,we discuss the remarkable role of physical energies in the control of cell signaling networks and in the specification of the architectural plan of both somatic and stem cells.In particular,we focus on the biological relevance of bioelectricity in the pattern control that orchestrates both developmental and regenerative pathways.To this end,the narrative starts from the dawn of the first studies on animal electricity,reconsidering the pioneer work of Harold Saxton Burr in the light of the current achievements.We finally discuss the most recent evidence showing that bioelectric signaling is an essential component of the informational processes that control pattern specification during embryogenesis,regeneration,or even malignant transformation.We conclude that there is now mounting evidence for the existence of a Morphogenetic Code,and that deciphering this code may lead to unprecedented opportunities for the development of novel paradigms of cure in regenerative and precision medicine.展开更多
Coronavirus disease 2019(COVID-19)caused by acute respiratory syndrome coronavirus 2(SARS-Cov-2)is still threatening the human life and society throughout the world.For those critically ill patients,mechanical ventila...Coronavirus disease 2019(COVID-19)caused by acute respiratory syndrome coronavirus 2(SARS-Cov-2)is still threatening the human life and society throughout the world.For those critically ill patients,mechanical ventilation(MV)is essential to provide life support during treatment.However,both the virus infection and MV disrupt the balance between secretion and elimination of airway mucus and lead to mucus accumulation in the lung.Postmortem examination verified that the lungs in patients died of COVID-19 are indeed filled with sticky mucus,suggesting a great need to improve airway mucus clearance in critically ill COVID-19 patients.Therefore,it may be helpful to comprehensively review the current understanding regarding the changes of biochemical and rheological features of airway mucus associated with the disease,as well as the physiological principles and algorithm to decide airway clearance techniques suitable for the critically ill COVID-19 patients.Based on these considerations,optimized strategies may be developed to eliminate the airway mucus accumulated in the airways of critically ill COVID-19 patients.展开更多
Dune fields at the northern margin of the East Asian monsoon (EAM), are mosaics of mobile and vegetation-stabilized aeolian dunes. These sand dunes are highly sensitive to environmental change, thus the distribution...Dune fields at the northern margin of the East Asian monsoon (EAM), are mosaics of mobile and vegetation-stabilized aeolian dunes. These sand dunes are highly sensitive to environmental change, thus the distribution and the timing of their development may provide important clues to past environmental dynamics. Due to the strong wind erosion and dune migration, long and continuous stratigraphic records are seldom preserved. Synthesizing a large body of events, ultimately producing a relatively complete and high-resolution record, may be a proper method to investigate the dune development history and climate change. In this study, we synthesized a large body of luminescence ages for aeolian deposits from the Mu Us, Otindag, Horqin dune fields at the northern margin of the EAM. The results show that these dune fields, as a whole experienced a most extensive mobility during the early Holocene, followed by a widespread shift toward limited mobility and soil development in the mid-Holocene, and widespread reactivation occurred during late Holocene. The dune developments are directly linked to the effective moisture change controlled by the EAM changes, which respond to the low latitude summer insolation variation. The increased subsidence at the margin contrary to the core EAM, the delay from the feedback of the soil-vegetation-air coupled system, the increased evaporation due to the high temperature all play partial role in the lag of the margin EAM effective moisture change to the low latitude summer insolation. The asynchronous end of the wetter mid-Holocene mainly responds to the southeastwardly shift of the precipitation belt, while the regional sensitivity, response speed and internal feedback also contributed. The correspondence between dune records and North Atlantic drift-ice records of the rapid climate changes implies a close relationship between North Atlantic climate and the frequent dune activity at the northern margin of EAM.展开更多
The two-rotational-degrees-of-freedom(2R) parallel mechanism(PM) with two continuous rotational axes(CRAs) has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration...The two-rotational-degrees-of-freedom(2R) parallel mechanism(PM) with two continuous rotational axes(CRAs) has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration,and motion control,which allows for a variety of application prospects.However,no systematic analysis on structural constraints of the 2R-PM with two CRAs has been performed,and there are only a few types of 2R-PM with two CRAs.Thus,a theory regarding the type synthesis of the 2R-PM with two CRAs is systematically established.First,combining the theories of reciprocal screw and space geometry,the spatial arrangement relationships of the constraint forces applied to the moving platform by the branches are explored,which give the 2R-PM two CRAs.The different distributions of the constraint forces in each branch are also studied.On the basis of the obtained structural constraints of branches,and considering the geometric relationships of constraint forces in each branch,the appropriate kinematic chains are constructed.Through the reasonable configuration of branch kinematic chains corresponding to every structural constraint,a series of new 2R-PMs with two CRAs are finally obtained.展开更多
Down-hole tubular string buckling is the most classic and complex part of tubular string mechanics in well engineering. Studies of down-hole tubular string buckling not only have theoretical significance in revealing ...Down-hole tubular string buckling is the most classic and complex part of tubular string mechanics in well engineering. Studies of down-hole tubular string buckling not only have theoretical significance in revealing the buckling mechanism but also have prominent practical value in design and control of tubular strings. In this review, the basic principles and applicable scope of three classic research methods (the beam-column model, buck- ling differential equation, and energy method) are intro- duced. The critical buckling loads and the post-buckling behavior under different buckling modes in vertical, inclined, horizontal, and curved wellbores from different researchers are presented and compared. The current understanding of the effects of torque, boundary condi- tions, friction force, and connectors on down-hole tubular string buckling is illustrated. Meanwhile, some unsolved problems and controversial conclusions are discussed. Future research should be focused on sophisticated description of buckling behavior and the coupling effect of multiple factors. In addition, active control of down-hole tubular string buckling behavior needs some attention urgently.展开更多
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.81972455 and 81902358)。
文摘Mechanical forces in the tumor microenvironment(TME)are associated with tumor growth,proliferation,and drug resistance.Strong mechanical forces in tumors alter the metabolism and behavior of cancer cells,thus promoting tumor progression and metastasis.Mechanical signals are transformed into biochemical signals,which activate tumorigenic signaling pathways through mechanical transduction.Cancer immunotherapy has recently made exciting progress,ushering in a new era of“chemo-free”treatments.However,immunotherapy has not achieved satisfactory results in a variety of tumors,because of the complex tumor microenvironment.Herein,we discuss the effects of mechanical forces on the tumor immune microenvironment and highlight emerging therapeutic strategies for targeting mechanical forces in immunotherapy.
基金supported in part by the Natural Science Foundation of China under the grants of 11072165,31270995 and 81320108018
文摘To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could be used to accelerate bone formation in a bony defect in vivo. The calcium sulfate cement was implanted into the left distal femoral epiphyses surgically in 16 rats. The half of rats were subjected to external mechanical force via treadmill exercise, the exercise started at day 7 postoperatively for 30 consecutive days and at a constant speed 8 m·min-1 for 45 min·day-1, while the rest served as a control. The rats were scanned four times longitudinally after surgery using microcomputed tomography and newly formed bone was evaluated. After sacrificing, the femurs had biomechanical test of three-point bending and histological analysis. The results showed that bone healing under mechanical force were better than the control with residual defect areas of 0.64±0.19 mm2 and 1.78±0.39 mm2(P〈0.001), and the ultimate loads to failure under mechanical force were 69.56±4.74 N, stronger than the control with ultimate loads to failure of 59.17±7.48 N(P=0.039). This suggests that the mechanical force might be used to improve new bone formation and potentially offer a clinical strategy to accelerate bone healing.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51272158 and 11302185)the Scientific Research Fund of Hunan Provincial Education Department,China(Grant No.13C901)the Hunan Provincial Natural Science Foundation,China(Grant Nos.14JJ3081 and 13JJ1019)
文摘The switching process of ferroelectric thin films in electronic devices is one of the most important requirements for their application. Especially for the different external fields acting on the film surface, the mechanism of domain switching is more complicated. Here we observe the nanoscale domain switchings of Bi3.15Eu0.85Ti3O12 thin film under different mechanical forces at a fast scan rate. As the force increases from initial state to 247.5 n N, the original bright or grey contrasts within the selected grains are all changed into dark contrasts corresponding to the polarization vectors reversed from the up state to the down state, except for the clusters. As the mechanical force increases to 495 n N, the color contrasts in all of the selected grains further turn into grey contrasts and some are even changed into grey contrasts completely showing the typical 90° domain switching. When another stronger loading force 742.5 n N is applied, the phase image becomes unclear and it indicates that the piezoelectric signal can be suppressed under a sufficiently high force, which is coincident with previous experimental results. Furthermore, we adopt the domain switching criterion from the perspective of equilibrium state free energy of ferroelectric nanodomain to explain the mechanisms of force-generated domain switchings.
基金supported by Natural Science Foundation of China grants10732070,10602031
文摘BK channels are widely expressed in both excitable and non-excitable cells and known to be involved in many physiological processes,such as vascular smooth tone regulation,neuronal firing and endocrine cell secretion[1].Recently, the BK channels have
文摘The vibration response formulas of the mechanical system under the affect of thevari-frequency exciting force are deduced. It is proved by the theoretical analysis and experimentalresults that the vibration response amplitude of the mechanical system under the affect of thevari-frequency exciting force is far smaller than that under the affect of the constant frequency exciting force on condition that the exciting force amplitudes are just the same;while the vari-fre-quency rate a increases to 5 Hz per second the vibration amplitude will decrease to 10% only as lowas that under the affect of the constant frequency exciting force. All these conclusions will be of significance for revealing the mechanism of suppressing chatter in van-speed cutting and analyzing theexperimental results of sine-wave scanning exciting test.
基金the National Natural Science Foundation of China(Grant No.11832008 and 11772073)by the Program of the Postgraduate Tutor Team,Chongqing Education Commission(2018).
文摘Cross-talk between tumor cells and mechanical stress in the tumor microenvironment has been shown to be involved in carcinogenesis.High mechanical stress in tumors can alter the metabolism and behaviors of cancer cells and cause cancer cells to attain cancer stem-like cell properties,thus driving tumor progression and promoting metastasis.The mechanical signal is converted into a biochemical signal that activates tumorigenic signaling pathways through mechanotransduction.Herein,we describe the physical changes occurring during reprogramming of cancer cell metabolism,which regulate cancer stem cell functions and promote tumor progression and aggression.Furthermore,we highlight emerging therapeutic strategies targeting mechanotransduction signaling pathways.
基金supported by the Construction and Scientific Research Project of the Zhejiang Provincial Department of Housing and Urban-Rural Development(No.2021K126,Granted byM.J.,Long,URL:https://jst.zj.gov.cn/)the ScientificResearch Project of ChinaConstruction 4th Engineering Bureau(No.CSCEC4B-2022-KTA-10,Granted by Z.C.,Bai,URL:https://4 bur.cscec.com/)+2 种基金the Scientific Research Project of China Construction 4th Engineering Bureau(No.CSCEC4B-2023-KTA-10,Granted by D.J.,Geng,URL:https://4bur.cscec.com/)the Natural Science Foundation of Hubei Province(No.2022CFD055,Granted by N.,Dai,URL:https://kjt.hubei.gov.cn/)the National Key Research and Development Program of China under Grant No.2022YFC3803002.
文摘According to the design specifications,the construction of extended piles involves traversing the tunnel’s upper region and extending to the underlying rock layer.To address this challenge,a subterranean transfer structure spanning multiple subway tunnels was proposed.Deliberating on the function of piles in the transfer structure as springs with axial and bending stiffness,and taking into account the force balance and deformation coordination conditions of beams and plates within the transfer structure,we established a simplified mechanical model that incorporates soil stratification by combining it with the Winkler elastic foundation beam model.The resolved established simplifiedmechanicalmodel employed finite difference technology and the Newton-Simpsonmethod,elucidating the mechanical mechanism of the transfer structure.The research findings suggest that the load carried by the upper structural columns can be transferred to the pile foundation beneath the beams through the transfer structure,subsequently reaching the deep soil layer and ensuring minimal impact on adjacent tunnels.The established simplified analysis method can be used for stress analysis of the transfer structure,concurrently considering soil stratification,pile foundation behavior,and plate action.The pile length,pile section size,and beam section size within the transfer structure should account for the characteristics of the upper load,ensuring an even distribution of the beam bending moment.
基金Supported by National Basic Research Program of China(973 Program,Grant No.2013CB035501)Research Fund of the State Key Lab of MSV of China(Grant No.MSV201208)
文摘Adaptive gaits for legged robots often requires force sensors installed on foot-tips,however impact,temperature or humidity can affect or even damage those sensors.Efforts have been made to realize indirect force estimation on the legged robots using leg structures based on planar mechanisms.Robot Octopus III is a six-legged robot using spatial parallel mechanism(UP-2UPS) legs.This paper proposed a novel method to realize indirect force estimation on walking robot based on a spatial parallel mechanism.The direct kinematics model and the inverse kinematics model are established.The force Jacobian matrix is derived based on the kinematics model.Thus,the indirect force estimation model is established.Then,the relation between the output torques of the three motors installed on one leg to the external force exerted on the foot tip is described.Furthermore,an adaptive tripod static gait is designed.The robot alters its leg trajectory to step on obstacles by using the proposed adaptive gait.Both the indirect force estimation model and the adaptive gait are implemented and optimized in a real time control system.An experiment is carried out to validate the indirect force estimation model.The adaptive gait is tested in another experiment.Experiment results show that the robot can successfully step on a 0.2 m-high obstacle.This paper proposes a novel method to overcome obstacles for the six-legged robot using spatial parallel mechanism legs and to avoid installing the electric force sensors in harsh environment of the robot's foot tips.
文摘In order to investigate the sealing performance variation resulted from the thermal deformation of the end faces, the equations to calculate the fluid film pressure distribution, the bearing force and the leakage rate are derived, for the fluid film both in parallel gap and in wedgy gap. The geometrical parameters of the sealing members are optimized by means of heat transfer analysis and complex method. The analysis results indicate that the shallow spiral grooves can generate hydrodynamic pressure while the rotating ring rotates and the bearing force of the fluid film in spiral groove end faces is much larger than that in the flat end faces. The deformation increases the bearing force of the fluid film in flat end faces, but it decreases the hydrodynamic pressure of the fluid film in spiral groove end faces. The gap dimensions which determine the characteristics of the fluid film is obtained by coupling analysis of the frictional heat and the thermal deformation in consideration of the equilibrium condition of the bearing force and the closing force. For different gap dimensions, the relation- ship between the closing force and the leakage rate is also investigated, based on which the leakage rate can be controlled by adjusting the closing force.
文摘wo different surface morphology characteristics of magnetron sputtered aluminumsilicon(Al-Si)alloy films deposited at 0 and 200℃ were observed by atomic force microscopy(AFM).One is irregularly shaped grains put togther on a plane.The other is irregularly shaped grains Piled up in space. Nanometer-sized particles with heights from 1.6 to 2.9 nm were first observed. On the basis of these observations the growth mechanism of magnetron sputtered films is discussed.
基金supported by the Basic Research Program through the National Research Foundation of Korea(NRF),which is financed by the Ministry of Education(Grant Nos.2018R1A6A1A03025582,2019R1D1A3A03103828,2022R1I1A3063302),Korea.
文摘Tissues are made up of cells and the extracellular matrix(ECM)which surrounds them.These cells and tissues are actively adaptable to enduring significant stress that occurs in daily life.This astonishing mechanical stress develops due to the interaction between the live cells and the non-living ECM.Cells in the matrix microenvironment can sense the signals and forces produced and initiate a signaling cascade that plays a crucial role in the body’s normal functioning and influences various properties of the native cells,including growth,proliferation,and differentiation.However,the matrix’s characteristic features also impact the repair and regeneration of the damaged tissues.The current study reviewed how the cell-ECM interaction regulates cellular behavior and physicochemical properties.Herein,we have described the response of cells to mechanical stresses,the importance of substrate stiffness and geometry in tissue regeneration,and the development of scaffolds to mimic the nature of native ECM in 3D for tissue engineering applications has also been discussed.Finally,the study summarizes the conclusions and promising prospects based on the cell-ECM interplay.
文摘Studies by many scientists show that Hebei, China is an area with strong correlation between the tidal force and the occurrences of major earthquakes, the Xingtai earthquake of 1966, the Hejian earthquake of 1967 and the Tangshan earthquake of 1976 were triggered by the tidal force, in this paper the study on the common characteristics of their occurrence times confirms these facts. The computed times of maximum horizontal of the semi diurnal solid tide tidal force show that the occurrence times of the above mentioned earthquakes were close to the times of maximum horizontal tidal force of the semi diurnal solid tide at new moon or full moon. The Longyao earthquake of M =6.8, the Ningjin earthquake of M =7.2 and the Hejian earthquake of M =6.3 occurred tens of minutes after the maximum horizontal tidal force of the semi diurnal solid tides, and the Tangshan earthquake of M =7.8 occurred 16 minutes before the maximum horizontal tidal force. The tidal forces were directed to the west. This is their temporal characteristic. It is generally accepted that the 1969 Bohai earthquake of M =7.4 and the 1975 Haicheng earthquake were not triggered by the tidal force. These events did not show such characteristics. The temporal characteristics of the earthquakes indicate that the occurrences of these events were not random, but were controlled by the tidal force from the sun and the moon, and triggered by the tidal force. These facts agree with the triggering mechanism of the tidal force, are evidences of earthquakes triggered by tidal force.
文摘The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.
基金supported by the National natural Science Foundation of China [grant numbers 12172198, 11272189 and 52078283]Youth Innovation Technology Project of Higher School in Shandong Province [grant number 2019KJG015]。
文摘Based on the background of structural protection and Disaster Reduction Engineering, the dynamic behaviour and failure mechanism of restrained beams in portal steel frames in localised fire are investigated via experimental measurement and numerical simulation techniques. Comprehensive parametric studies are carried out to discuss the influence of end connection types, temperature, impact velocity,impact mass and span-to-depth ratio(SDR) on the dynamic response of the beams. The characteristics of deformation, internal force and energy distribution about the restrained beams and its joints are investigated. A temperature dependent criterion for evaluating the frame joint performance is proposed to measure the degree of performance degradation and impact resistance of the joint. The dynamic displacement amplification factor in different temperature environments are proposed for the different beam end constraint types and SDRs. Results of the experimental and numerical analysis show that the welded connection(WC) of three typical joint types is the strongest, and the extended endplate connection(EEC) is the weakest in terms of the impact resistance performance. With regard to the failure mode of the joint, the failure positions of the WC and the welded-bolted connection are located in the inner web of the column. Meanwhile, the EEC is located in the connection position between the beam and the endplate. Three different internal force stages and two obvious critical temperature boundaries of the restrained beams emerge with the increase in temperature, and they have significant characteristics in terms of deformation trend, internal force transfer and energy distribution. During the impact, a phenomenon known as “compression arch action” develops into “catenary action” with the increase in deflection in the frame beam mechanism.
基金the National Natural Science Foundation of China(Grant No.31771551 to F.N.).
文摘Mechanotransduction,a conversion of mechanical forces into biochemical signals,is essential for human development and physiology.It is observable at all levels ranging from the whole body,organs,tissues,organelles down to molecules.Dysregulation results in various diseases such as muscular dystrophies,hypertension-induced vascular and cardiac hypertrophy,altered bone repair and cell deaths.Since mechanotransduction occurs at nanoscale,nanosciences and applied nanotechnology are powerful for studying molecular mechanisms and pathways of mechanotransduction.Atomic force microscopy,magnetic and optical tweezers are commonly used for force measurement and manipulation at the single molecular level.Force is also used to control cells,topographically and mechanically by specific types of nano materials for tissue engineering.Mechanotransduction research will become increasingly important as a sub-discipline under nanomedicine.Here we review nanotechnology approaches using force measurements and manipulations at the molecular and cellular levels during mechanotransduction,which has been increasingly play important role in the advancement of nanomedicine.
文摘In this editorial,we discuss the remarkable role of physical energies in the control of cell signaling networks and in the specification of the architectural plan of both somatic and stem cells.In particular,we focus on the biological relevance of bioelectricity in the pattern control that orchestrates both developmental and regenerative pathways.To this end,the narrative starts from the dawn of the first studies on animal electricity,reconsidering the pioneer work of Harold Saxton Burr in the light of the current achievements.We finally discuss the most recent evidence showing that bioelectric signaling is an essential component of the informational processes that control pattern specification during embryogenesis,regeneration,or even malignant transformation.We conclude that there is now mounting evidence for the existence of a Morphogenetic Code,and that deciphering this code may lead to unprecedented opportunities for the development of novel paradigms of cure in regenerative and precision medicine.
基金supported by the Key Program of the NSF of China[No.11532003]the NSF of China[Nos.12072048,31670950]+1 种基金the Science and Technology Innovation Leading Plan of High Tech Industry in Hunan Province[2020SK2018]the Applied Basic Research Project of Changzhou[No.CJ20179039].
文摘Coronavirus disease 2019(COVID-19)caused by acute respiratory syndrome coronavirus 2(SARS-Cov-2)is still threatening the human life and society throughout the world.For those critically ill patients,mechanical ventilation(MV)is essential to provide life support during treatment.However,both the virus infection and MV disrupt the balance between secretion and elimination of airway mucus and lead to mucus accumulation in the lung.Postmortem examination verified that the lungs in patients died of COVID-19 are indeed filled with sticky mucus,suggesting a great need to improve airway mucus clearance in critically ill COVID-19 patients.Therefore,it may be helpful to comprehensively review the current understanding regarding the changes of biochemical and rheological features of airway mucus associated with the disease,as well as the physiological principles and algorithm to decide airway clearance techniques suitable for the critically ill COVID-19 patients.Based on these considerations,optimized strategies may be developed to eliminate the airway mucus accumulated in the airways of critically ill COVID-19 patients.
基金financially supported by the National Science Foundation of China(Grant No.41102102)"Strategic Priority Research Program"of the Chinese Academy of Sciences(Grant No.XDB03020300)the Key Research Program of the Chinese Academy of Sciences(Grant No.KZZD-EW-04-03)
文摘Dune fields at the northern margin of the East Asian monsoon (EAM), are mosaics of mobile and vegetation-stabilized aeolian dunes. These sand dunes are highly sensitive to environmental change, thus the distribution and the timing of their development may provide important clues to past environmental dynamics. Due to the strong wind erosion and dune migration, long and continuous stratigraphic records are seldom preserved. Synthesizing a large body of events, ultimately producing a relatively complete and high-resolution record, may be a proper method to investigate the dune development history and climate change. In this study, we synthesized a large body of luminescence ages for aeolian deposits from the Mu Us, Otindag, Horqin dune fields at the northern margin of the EAM. The results show that these dune fields, as a whole experienced a most extensive mobility during the early Holocene, followed by a widespread shift toward limited mobility and soil development in the mid-Holocene, and widespread reactivation occurred during late Holocene. The dune developments are directly linked to the effective moisture change controlled by the EAM changes, which respond to the low latitude summer insolation variation. The increased subsidence at the margin contrary to the core EAM, the delay from the feedback of the soil-vegetation-air coupled system, the increased evaporation due to the high temperature all play partial role in the lag of the margin EAM effective moisture change to the low latitude summer insolation. The asynchronous end of the wetter mid-Holocene mainly responds to the southeastwardly shift of the precipitation belt, while the regional sensitivity, response speed and internal feedback also contributed. The correspondence between dune records and North Atlantic drift-ice records of the rapid climate changes implies a close relationship between North Atlantic climate and the frequent dune activity at the northern margin of EAM.
基金Supported by National Natural Science Foundation of China(Grant No.51405425)Hebei Provincial Natural Science Foundation of China(Grant No.E2014203255)Independent Research Program Topics of Young Teachers in Yanshan University,China(Grant No.13LGA001)
文摘The two-rotational-degrees-of-freedom(2R) parallel mechanism(PM) with two continuous rotational axes(CRAs) has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration,and motion control,which allows for a variety of application prospects.However,no systematic analysis on structural constraints of the 2R-PM with two CRAs has been performed,and there are only a few types of 2R-PM with two CRAs.Thus,a theory regarding the type synthesis of the 2R-PM with two CRAs is systematically established.First,combining the theories of reciprocal screw and space geometry,the spatial arrangement relationships of the constraint forces applied to the moving platform by the branches are explored,which give the 2R-PM two CRAs.The different distributions of the constraint forces in each branch are also studied.On the basis of the obtained structural constraints of branches,and considering the geometric relationships of constraint forces in each branch,the appropriate kinematic chains are constructed.Through the reasonable configuration of branch kinematic chains corresponding to every structural constraint,a series of new 2R-PMs with two CRAs are finally obtained.
基金the financial support from the Natural Science Foundation of China (NSFC,51221003,U1262201)the Science Foundation of China University of Petroleum,Beijing (No.00000)supported by other projects (Grant Numbers:2014A-4214,2013AA064803,2011ZX05009-005)
文摘Down-hole tubular string buckling is the most classic and complex part of tubular string mechanics in well engineering. Studies of down-hole tubular string buckling not only have theoretical significance in revealing the buckling mechanism but also have prominent practical value in design and control of tubular strings. In this review, the basic principles and applicable scope of three classic research methods (the beam-column model, buck- ling differential equation, and energy method) are intro- duced. The critical buckling loads and the post-buckling behavior under different buckling modes in vertical, inclined, horizontal, and curved wellbores from different researchers are presented and compared. The current understanding of the effects of torque, boundary condi- tions, friction force, and connectors on down-hole tubular string buckling is illustrated. Meanwhile, some unsolved problems and controversial conclusions are discussed. Future research should be focused on sophisticated description of buckling behavior and the coupling effect of multiple factors. In addition, active control of down-hole tubular string buckling behavior needs some attention urgently.