The design and implementation of mechanical domestic water meters in current industrial organization and intellectual properties have been registered as an invention to solve the problems of current meters. The device...The design and implementation of mechanical domestic water meters in current industrial organization and intellectual properties have been registered as an invention to solve the problems of current meters. The device operation includes inquiry of printing, subscription connection and disconnection in an emergency. This system includes a software and hardware parts on the users and the control center connecting with two-way mobile phone. Central control software sends the message through the wireless telecommunication lines to the user’s software, requesting the desired information and also provides the commands needed to be sent through the same. The same information can also be submitted to the control center. Through the same way, some of advantages of this method are as follows: installing on existing meters, cheap cost of inquiry call meter, the possibility of declaring illegal manipulation to the control center, the exchange of information using information encoding, and manipulating digital meters applying minor changes.展开更多
The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied ...The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied using an X-ray fluorescence analyzer, scanning electron microscope, and electron probe. Results revealed that the composition, structure, and mineral phase of the original layer, transition layer, and affected layer of the metering nozzle differed because of stabilizer precipitation and steel slag permeation. The stabilizer MgO formed low-melting phases with steel slag and impure SiO2 on the boundaries（pores） of zirconia grains; consequently, grain fracturing occurred and accelerated damage to the metering nozzle was observed.展开更多
The design scheme for a new kind of long-distance intelligent watt-hour meter is presented. In the system, the control computer communicates with the bank＇s host computer by the X. 25 network; the built-in embeded se...The design scheme for a new kind of long-distance intelligent watt-hour meter is presented. In the system, the control computer communicates with the bank＇s host computer by the X. 25 network; the built-in embeded secure access module （ESAM） can verify data by commutation with the intelligent nodes that enhance the security of the data. IC TSS721 is adopted to collect data remotely, and the CPU IC card is used to ensure the the bargaining security and reliability. In addition, the software of the system is introduced.展开更多
There is an imperfection in the accuracy indicators system and the technical parameters system in IEC standards 62053-21 implemented for watt-hour meters currently. This article quoted some parts of OIML MI-003 and R4...There is an imperfection in the accuracy indicators system and the technical parameters system in IEC standards 62053-21 implemented for watt-hour meters currently. This article quoted some parts of OIML MI-003 and R46 contents to provide a reference of the integrity comparison between the accuracy system and technical parameter system. The comparison result shows that the watt-hour meter accuracy technical indicators system of OIML R46 is more integrated. First reason is that it determines all the accuracy （basic error） defining rules just by using the technical parameter I efficiently; secondly, it can solve the contradiction that no error regulation of the range from starting current to minimum current in the process of providing, handing over and checking watt-hour meter products＇ qualities efficiently. Please pay close attention to the R46 official version which will be released soon, as it is still in the Committee Draft （CD6） stage currently.展开更多
Nutrient application systems are designed to apply a relatively uniform amount of a fertilizer to agricultural fields. However, considerable variation in soil texture and other characteristics often occurs within and ...Nutrient application systems are designed to apply a relatively uniform amount of a fertilizer to agricultural fields. However, considerable variation in soil texture and other characteristics often occurs within and across production fields, which could have a major impact on fertilizer management strategies. Therefore, uniform application of a fertilizer over the entire field can be both costly and environmentally unsound. Due to their rugged and fool-proof design, crankshaft type piston pumps are widely used in agriculture. The on-the-go outlet flow of these pumps can only be varied by changing the drive shaft speed for each pump stroke setting. But only a limited range of flow rates can be achieved by changing the drive shaft speed. There is a need for an electronic controller, which can adjust the pump stroke on-the-go, for real-time, variable-rate application of crop nutrients. The Clemson “Electro-me-chanical controller for adjusting pump stroke on-the-go” was designed to replace the current manual stroke adjustment system on positive displacement piston pumps. This affordable system can be retrofitted on most John Blue - piston pumps for real-time adjustment of the pump stroke and can be controlled using pre-described position sequences (map-based) or real-time sensor commands (such as optical, pressure, and flow sensors) combined with fertilizer calculation algorithms. In addition, it can adjust pump stroke manually, using an eclectic dial from the tractor’s cab.展开更多
准确检测变电站中的设备缺陷并及时进行处理是保证电力系统安全运行的重要措施.针对表计缺陷图像背景复杂、目标尺寸不一、外形差别大等问题,提出基于改进YOLOv5(you only look once的第5个版本)的变电站表计缺陷检测算法.为了提高泛化...准确检测变电站中的设备缺陷并及时进行处理是保证电力系统安全运行的重要措施.针对表计缺陷图像背景复杂、目标尺寸不一、外形差别大等问题,提出基于改进YOLOv5(you only look once的第5个版本)的变电站表计缺陷检测算法.为了提高泛化能力、解决训练过程中样本不平衡问题,利用旋转和改变图像亮度的方法进行数据增广.通过引入坐标注意力机制,在聚焦缺陷特征的同时,能突出缺陷特征的差异.为了使边界框回归更快速准确,将EDIOU loss(effective distance intersection over union loss)代替CIOU loos(complete intersection over union loss).实验结果表明:6种算法中,该文算法的准确度、召回率和mAP(mean average preciscion)均最高,分别达85.1%,86.6%,87.3%.因此,该文算法具有优越性.展开更多
由于DCS控制器中电表传感器在计量检测过程中,传统的B-MAC-DCS协议能耗和丢包率较高,无法缓解汇聚节点的漏斗效应,导致在远程抄表过程中传感器计量误差增大。提出一种机械电表接触传感器计量误差检测方法。采用小波基函数对DCS控制器中...由于DCS控制器中电表传感器在计量检测过程中,传统的B-MAC-DCS协议能耗和丢包率较高,无法缓解汇聚节点的漏斗效应,导致在远程抄表过程中传感器计量误差增大。提出一种机械电表接触传感器计量误差检测方法。采用小波基函数对DCS控制器中的接触传感器计量数据抗干扰处理,并通过动态选取阈值的方法,对经过小波变换后的数据去除噪声。使用低功耗自适应集簇分层型(low energy adaptive clustering hierarchy,LEACH)协议分簇代替传统的B-MAC协议;根据簇内监测值,引入阈值分析方法获取传感器计量指标,并将其作为判定依据进行误差检测,根据计量指标的变化情况判断是否存在计量误差。实验结果表明,所提方法可以准确且有效检测出机械电表接触传感器计量误差,解决DCS中机械电表的运行隐患问题。展开更多
文摘The design and implementation of mechanical domestic water meters in current industrial organization and intellectual properties have been registered as an invention to solve the problems of current meters. The device operation includes inquiry of printing, subscription connection and disconnection in an emergency. This system includes a software and hardware parts on the users and the control center connecting with two-way mobile phone. Central control software sends the message through the wireless telecommunication lines to the user’s software, requesting the desired information and also provides the commands needed to be sent through the same. The same information can also be submitted to the control center. Through the same way, some of advantages of this method are as follows: installing on existing meters, cheap cost of inquiry call meter, the possibility of declaring illegal manipulation to the control center, the exchange of information using information encoding, and manipulating digital meters applying minor changes.
基金funded by the National Natural Science Foundation of China(51372193)the Natural Science Basic Research Plan in the Shaanxi Province of China(2014JM6224)
文摘The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied using an X-ray fluorescence analyzer, scanning electron microscope, and electron probe. Results revealed that the composition, structure, and mineral phase of the original layer, transition layer, and affected layer of the metering nozzle differed because of stabilizer precipitation and steel slag permeation. The stabilizer MgO formed low-melting phases with steel slag and impure SiO2 on the boundaries（pores） of zirconia grains; consequently, grain fracturing occurred and accelerated damage to the metering nozzle was observed.
文摘The design scheme for a new kind of long-distance intelligent watt-hour meter is presented. In the system, the control computer communicates with the bank＇s host computer by the X. 25 network; the built-in embeded secure access module （ESAM） can verify data by commutation with the intelligent nodes that enhance the security of the data. IC TSS721 is adopted to collect data remotely, and the CPU IC card is used to ensure the the bargaining security and reliability. In addition, the software of the system is introduced.
文摘There is an imperfection in the accuracy indicators system and the technical parameters system in IEC standards 62053-21 implemented for watt-hour meters currently. This article quoted some parts of OIML MI-003 and R46 contents to provide a reference of the integrity comparison between the accuracy system and technical parameter system. The comparison result shows that the watt-hour meter accuracy technical indicators system of OIML R46 is more integrated. First reason is that it determines all the accuracy （basic error） defining rules just by using the technical parameter I efficiently; secondly, it can solve the contradiction that no error regulation of the range from starting current to minimum current in the process of providing, handing over and checking watt-hour meter products＇ qualities efficiently. Please pay close attention to the R46 official version which will be released soon, as it is still in the Committee Draft （CD6） stage currently.
文摘Nutrient application systems are designed to apply a relatively uniform amount of a fertilizer to agricultural fields. However, considerable variation in soil texture and other characteristics often occurs within and across production fields, which could have a major impact on fertilizer management strategies. Therefore, uniform application of a fertilizer over the entire field can be both costly and environmentally unsound. Due to their rugged and fool-proof design, crankshaft type piston pumps are widely used in agriculture. The on-the-go outlet flow of these pumps can only be varied by changing the drive shaft speed for each pump stroke setting. But only a limited range of flow rates can be achieved by changing the drive shaft speed. There is a need for an electronic controller, which can adjust the pump stroke on-the-go, for real-time, variable-rate application of crop nutrients. The Clemson “Electro-me-chanical controller for adjusting pump stroke on-the-go” was designed to replace the current manual stroke adjustment system on positive displacement piston pumps. This affordable system can be retrofitted on most John Blue - piston pumps for real-time adjustment of the pump stroke and can be controlled using pre-described position sequences (map-based) or real-time sensor commands (such as optical, pressure, and flow sensors) combined with fertilizer calculation algorithms. In addition, it can adjust pump stroke manually, using an eclectic dial from the tractor’s cab.
文摘准确检测变电站中的设备缺陷并及时进行处理是保证电力系统安全运行的重要措施.针对表计缺陷图像背景复杂、目标尺寸不一、外形差别大等问题,提出基于改进YOLOv5(you only look once的第5个版本)的变电站表计缺陷检测算法.为了提高泛化能力、解决训练过程中样本不平衡问题,利用旋转和改变图像亮度的方法进行数据增广.通过引入坐标注意力机制,在聚焦缺陷特征的同时,能突出缺陷特征的差异.为了使边界框回归更快速准确,将EDIOU loss(effective distance intersection over union loss)代替CIOU loos(complete intersection over union loss).实验结果表明:6种算法中,该文算法的准确度、召回率和mAP(mean average preciscion)均最高,分别达85.1%,86.6%,87.3%.因此,该文算法具有优越性.
文摘由于DCS控制器中电表传感器在计量检测过程中,传统的B-MAC-DCS协议能耗和丢包率较高,无法缓解汇聚节点的漏斗效应,导致在远程抄表过程中传感器计量误差增大。提出一种机械电表接触传感器计量误差检测方法。采用小波基函数对DCS控制器中的接触传感器计量数据抗干扰处理,并通过动态选取阈值的方法,对经过小波变换后的数据去除噪声。使用低功耗自适应集簇分层型(low energy adaptive clustering hierarchy,LEACH)协议分簇代替传统的B-MAC协议;根据簇内监测值,引入阈值分析方法获取传感器计量指标,并将其作为判定依据进行误差检测,根据计量指标的变化情况判断是否存在计量误差。实验结果表明,所提方法可以准确且有效检测出机械电表接触传感器计量误差,解决DCS中机械电表的运行隐患问题。
