Theoretical analyses and experimental studies of the mechanisms of melting film formation are performed. The results show that frictional heating is the dominant mechanism because temperature behaves in the manner pr...Theoretical analyses and experimental studies of the mechanisms of melting film formation are performed. The results show that frictional heating is the dominant mechanism because temperature behaves in the manner predicted by the theory of frictional heating. A study of the active technology for anti-skid is also made. Conclusions indicate that adjusting tire pneumatic pressure can improve the control stability and the travelling safety of an ice-automobile.展开更多
An innovative in-flight glass melting technology with a multi-phase AC arc plasma was developed to save energy and reduce emissions for the glass industry. The effect of the injection position on the in-flight melting...An innovative in-flight glass melting technology with a multi-phase AC arc plasma was developed to save energy and reduce emissions for the glass industry. The effect of the injection position on the in-flight melting behavior of granulated powders was investigated. Results show that the injection position has a strong effect on the melting behavior of alkali-free glass raw material. With the increase in injection distance, the vitrification, decomposition, and particle shrinkage of initial powders are improved. Longer injection distance causes much energy to transfer to particles due to a longer residence time of powder in the high temperature zone. The high vitrification and decomposition degrees indicate that the new in-flight melting technology with 12-phase AC arc can substantially reduce the melting and refining time for glass production.展开更多
The new designed at Institute for High Energy Physics (IHEP) technologies ot polystyrene sclntmatol~ ll,aJJu,a 5, molding of polystyrene granules under pressure, melting of granules in forms with mirrors wails, prod...The new designed at Institute for High Energy Physics (IHEP) technologies ot polystyrene sclntmatol~ ll,aJJu,a 5, molding of polystyrene granules under pressure, melting of granules in forms with mirrors wails, production of scintillating granules and detectors on their basis are considered. The main characteristics of the polystyrene scintillators produced by a method of large-block polymerization and a method of extruding of scintillation strips from polymerized blocks are provided in this article also.展开更多
BACKGROUND Hip revision surgery is the final treatment option for the failure of artificial hip joints, but it is more difficult than the initial operation. For patients with hip joint loosening around the prosthesis ...BACKGROUND Hip revision surgery is the final treatment option for the failure of artificial hip joints, but it is more difficult than the initial operation. For patients with hip joint loosening around the prosthesis combined with large inflammatory pseudotumours and large segment bone defects, hip revision is even more difficult, and clinical reports are rare.CASE SUMMARY Male, 59 years old. The patient underwent left hip replacement 35 years ago and was now admitted to hospital due to massive masses in the left thigh, shortening of the left lower extremity, and pain and lameness of the left hip joint. X-ray, computed tomography and magnetic resonance imaging revealed prosthesis loosening, left acetabular bone defect(Parprosky IIIB type), and a bone defect of the left proximal femur(Parprosky IIIA type). Inflammatory pseudotumours were seen in the left hip and left thigh. Hip revision surgery was performed using a 3Dprinted custom acetabular prosthesis was used for hip revision surgery, which was produced by Arcam Electron Beam Melting system with Electron Beam Melting technology. The operation was successful, and the patient was followed up regularly after the operation. The custom-made acetabular prosthesis was well matched, the inflammatory pseudotumour was completely removed, the postoperative hip prosthesis was stable, and the old greater trochanter fracture was well reduced and fixed. The patient was partially weight-bearing with crutches 3 mo after the operation and walked with full weight-bearing after 6 mo. The hip prosthesis was stable, and there was no recurrence of inflammatory pseudotumours at the last follow-up. The Visual Analogue Scale was 3, and the Harris hip score was 90.CONCLUSION The use of 3D-printed personalized custom prostheses for complex hip revision surgery has satisfactory surgical results and has great clinical application value.展开更多
基金1This project is supported by National Natural Science Foundation of China ( No.59475033)
文摘Theoretical analyses and experimental studies of the mechanisms of melting film formation are performed. The results show that frictional heating is the dominant mechanism because temperature behaves in the manner predicted by the theory of frictional heating. A study of the active technology for anti-skid is also made. Conclusions indicate that adjusting tire pneumatic pressure can improve the control stability and the travelling safety of an ice-automobile.
基金supported by the New Energy and Industrial Technology Development Organization of Japan and the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry of China
文摘An innovative in-flight glass melting technology with a multi-phase AC arc plasma was developed to save energy and reduce emissions for the glass industry. The effect of the injection position on the in-flight melting behavior of granulated powders was investigated. Results show that the injection position has a strong effect on the melting behavior of alkali-free glass raw material. With the increase in injection distance, the vitrification, decomposition, and particle shrinkage of initial powders are improved. Longer injection distance causes much energy to transfer to particles due to a longer residence time of powder in the high temperature zone. The high vitrification and decomposition degrees indicate that the new in-flight melting technology with 12-phase AC arc can substantially reduce the melting and refining time for glass production.
文摘The new designed at Institute for High Energy Physics (IHEP) technologies ot polystyrene sclntmatol~ ll,aJJu,a 5, molding of polystyrene granules under pressure, melting of granules in forms with mirrors wails, production of scintillating granules and detectors on their basis are considered. The main characteristics of the polystyrene scintillators produced by a method of large-block polymerization and a method of extruding of scintillation strips from polymerized blocks are provided in this article also.
文摘BACKGROUND Hip revision surgery is the final treatment option for the failure of artificial hip joints, but it is more difficult than the initial operation. For patients with hip joint loosening around the prosthesis combined with large inflammatory pseudotumours and large segment bone defects, hip revision is even more difficult, and clinical reports are rare.CASE SUMMARY Male, 59 years old. The patient underwent left hip replacement 35 years ago and was now admitted to hospital due to massive masses in the left thigh, shortening of the left lower extremity, and pain and lameness of the left hip joint. X-ray, computed tomography and magnetic resonance imaging revealed prosthesis loosening, left acetabular bone defect(Parprosky IIIB type), and a bone defect of the left proximal femur(Parprosky IIIA type). Inflammatory pseudotumours were seen in the left hip and left thigh. Hip revision surgery was performed using a 3Dprinted custom acetabular prosthesis was used for hip revision surgery, which was produced by Arcam Electron Beam Melting system with Electron Beam Melting technology. The operation was successful, and the patient was followed up regularly after the operation. The custom-made acetabular prosthesis was well matched, the inflammatory pseudotumour was completely removed, the postoperative hip prosthesis was stable, and the old greater trochanter fracture was well reduced and fixed. The patient was partially weight-bearing with crutches 3 mo after the operation and walked with full weight-bearing after 6 mo. The hip prosthesis was stable, and there was no recurrence of inflammatory pseudotumours at the last follow-up. The Visual Analogue Scale was 3, and the Harris hip score was 90.CONCLUSION The use of 3D-printed personalized custom prostheses for complex hip revision surgery has satisfactory surgical results and has great clinical application value.