OPTIMUM CUTTING ANALYSIS METHOD OF MEMBRANE STRUCTURE

By the optimum theory, a new cutting analytical method of the membrane structure is developed. The B-spline curve is applied to make smooth the boundary of the membrane strip. By this method, the cutting accuracy is improved. Finally, a cutting analysis example of a tension membrane structure is given.

Experimental study on interaction between membrane structures and wind environment

The interaction between membrane structures and their environment can be either static or dynamic. Static interaction refers to interaction with static air, while dynamic interaction refers to wind and its effects. They can be evaluated by two parameters, added mass and radiation/aerodynamic damping, which are experimentally investigated in this study. The study includes the effects of both the static and dynamic interaction on structural dynamic characteristics, and the relationship between the interaction parameters and the covered area of a membrane structure for the static interaction and the relationship between the interaction parameters and wind direction and speed for the dynamic interaction. Experimental data show that the dynamic interaction is strongly correlated with the structural modes, i.e., the interaction of the symmetric modes is much larger than the anti-synmletric modes; and the influence of the dynamic interaction is significant in wind-induced response analysis and cannot be ignored. In addition, it is concluded that the structural natural frequency is remarkably decreased by this interaction, and the frequency band is significantly broadened.

Multi-objective optimization of membrane structures based on Pareto Genetic Algorithm

A multi-objective optimization method based on Pareto Genetic Algorithm is presented for shape design of membrane structures from a structural view point.Several non-dimensional variables are defined as optimization variables,which are decision factors of shapes of membrane structures.Three objectives are proposed including maximization of stiffness,maximum uniformity of stress and minimum reaction under external loads.Pareto Multi-objective Genetic Algorithm is introduced to solve the Pareto solutions.Consequently,the dependence of the optimality upon the optimization variables is derived to provide guidelines on how to determine design parameters.Moreover,several examples illustrate the proposed methods and applications.The study shows that the multi-objective optimization method in this paper is feasible and efficient for membrane structures;the research on Pareto solutions can provide explicit and useful guidelines for shape design of membrane structures.

Analysis of tensioned membrane structures considering cable sliding

In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. On the other hand, large deflections are expected and sliding between the membrane and the cables is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface on the structural behavior. Three analysis models were devised to fulfill this purpose: (1) The membrane element shares nodes with the cable element; (2) The cable can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface - based contact algorithm. The results from three analysis models are compared, showing that cable sliding has only little influence on the structure shape and on the stress distributions in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.

Wind-induced response analysis of conical membrane structures

Conical membrane structures are a typical form of tensile membrane structures. In the past, most studies focused on the static performance, but few on dynamic performance. In this paper, systematic parameter analysis of wind-induced response of conical membrane structures has been performed with nonlinear random simulation method in a time domain, by considering some parameters, such as span, rise-span ratio, prestress of membrane, and characteristic of the approaching wind flow. Moreover, formulas of the dynamic coefficient and nonlinear adjustment factor are advised, which can be conveniently used in wind-resistant design of conical membrane structures.

Smooth cutting pattern generation technique for membrane structures using geodesic line on subplane and spline interpolation

Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approximation methods were used to flatten the strip for the generation of a smooth pattern.This search approach is very simple,and the geodesic line could be easily attained by the proposed method without the need for a difficult computation method.Smooth cutting patterning can also be generated by spline approximation without the noise in discrete nodal information.Additionally,the geodesic cutting pattern saved about 21%of the required area for the catenary model due to the reduction of the curvature of the planar pattern seam line.

Wrinkling analysis of square space membrane structure under corner tension forces

An analytical approach based on the bifurcation theory is presented,in which the wrinkles are treated as the local buckling phenomena of the elastic thin plate with little bending stiffness.The average wrinkling wavelength was determined by incorporating the stress field and the out-of-plane force equilibrium condition of the wrinkled membrane.The wrinkling amplitude was then obtained by associating the characteristics of wrinkling texture with the obtained wrinkling wavelength.Results reveal that the wrinkled pattern exhibits a noticeable difference when the tension load is changed gradually,and two wrinkling styles are identified.The first style occurs for symmetric and moderately asymmetric loading,and it is characterized by small,radial corner wrinkles;the second style occurs for strongly asymmetric loading and is characterized by a deep,large diagonal wrinkle.The analytical predictions on the wrinkling characteristics and the developed rules are validated against wrinkling experimental observations.

Deployment Characteristics of Braid Coated Bi-Convex Tape and Bi-SMA Convex Tape Booms for Deployable Membrane Structures

The purpose of this paper is to demonstrate and investigate the concepts of new deployable boom systems, which consist of the BCON （braid coated bi-convex tape） boom and the SMA-BCON （braid coated bi-shape memory alloy convex tape） boom. Both booms are developed for the deployable membrane structures such as solar sails, thin membrane solar array panels, deorbit mechanisms for small satellites and reflectors of space solar power satellite, etc. BCON booms can store around polygonal or cylindrical center hub, and the booms can deploy by the stepwise manner by releasing a constraint mechanism which pins the boons into two or three points for the total length. SMA-BCON booms are mainly developed for a square center body systems, and SMA is adapted on the bent po^nts of the booms where stored around each edge of the center hub. Through the deployment experiments of both booms, the stepwise deployment behavior and its tendency are obtained. The design concept of BCON boom and SMA-BCON hnnm i~ demonstrated through this study.

Computation method of zero-stress state of pneumatic stressed membrane structure

The whole analysis process of pneumatic stressed membrane structure contains nine states and seven analysis processes.The zero-stress state is the corner-stone of analysis and design of pneumatic stressed structure,and has significant impact on the pre-stressed state and load state.According to the logical model of the whole numerical analysis process of pneumatic stressed structure,a numerical analysis method to solve the zero-stress state from the elasticized equilibrium state was firstly proposed,called linear compatibility matrix M-P inverse method.Firstly,the pneumatic membrane stressed structure was transferred into grid structure by using membrane link to simulate membrane surface.Secondly,on the basis of equilibrium matrix theory of pin joint structure and small deformation assumption,compatibility equation of system was established.Thirdly,the unstressed length and elongation of links were calculated from the tension and material parameters of elasticized equilibrium state.Finally,using compatibility matrix M-P inverse,the nodal displacement was calculated by solving compatibility equation,the configuration of zero-stress state could be obtained through reverse superposition,and the stress was released.According to the algorithm,the program was coded with MATLAB.The correctness and efficiency of this method were verified by several numerical examples,and it could be found that one elasticized equilibrium state corresponded to one configuration of the zero-stress state.The work has theoretical significance and practical guidance value for pneumatic membrane structural design.

FORMATION AND MICROSTRUCTURE OF POLYETHYLENE MICROPOROUS MEMBRANES THROUGH THERMALLY INDUCED PHASE SEPARATION

Microporous membranes of low-high density polyethylene and their blends were prepared bythermally-induced phase separation of polymer/long-aliphatic chain alcohol (diluent) mixtures.The microstructures of this particular membrane, which depends on the diluent properties,polymer concentration and cooling rate, were observed by scanning electron microscopy.'Beehive-type,'leafy-like, and lacy porous structure morphologies can be formed,depending onthe blend composition and phase separation conditions, which were discussed by the polymer anddiluent crystallization processes.

Loading and wrinkling analysis of membrane structures

Loading analysis,as one of the most crucial procedures in the assessment of safety of the membrane structures,is to check the adequacy of structural stiffness and the extent of membrane stress and deformation,thus ensuring the structural stability and avoiding the wrinkling of membrane structures.In this paper,the analysis procedures are presented and the wrinkling of membrane structure,representing a major behavioral performance of the structure,is included with the modified constitutive relationship method.As for the judgment of the membrane wrinkling,the principal stress-strain criteria are incorporated.Thereafter,an integrated algorithm is developed,in which the Newton-Raphson method and updated Lagrange formulation are adopted.With the proposed algorithm,two fabric roof structures are analyzed.Results show that the presented method is feasible and reliable.

Myristoylation of EV71 VP4 is Essential for Infectivity and Interaction with Membrane Structure

The Enterovirus 71(EV71)VP4 is co-translationally linked to myristic acid at its amino-terminal glycine residue.However,the role of this myristoylation in the EV71 life cycle remains largely unknown.To investigate this issue,we developed a myristoylation-deficient virus and reporter(luciferase)pseudovirus with a Gly-to-Ala mutation(G2A)on EV71 VP4.When transfecting the EV71-G2 A genome encoding plasmid in cells,the loss of myristoylation on VP4 did not affect the expression of viral proteins and the virus morphology,however,it did significantly influence viral infectivity.Further,in myristoylation-deficient reporter pseudovirus-infected cells,the luciferase activity and viral genome RNA decreased significantly as compared to that of wild type virus;however,cytopathic effect and viral capsid proteins were not detected in myristoylation-deficient virus-infected cells.Also,although myristoylation-deficient viral RNA and proteins were detected in the second blind passage of infection,they were much fewer in number compared to that of the wild type virus.The replication of genomic RNA and negative-strand viral RNA were both blocked in myristoylation-deficient viruses,suggesting that myristoylation affects viral genome RNA release from capsid to cytoplasm.Besides,loss of myristoylation on VP4 altered the distribution of VP4-green fluorescent protein protein,which disappeared from the membrane structure fraction.Finally,a liposome leakage assay showed that EV71 myristoylation mediates the permeability of the model membrane.Hence,the amino-terminal myristoylation of VP4 is pivotal to EV71 infection and capsidmembrane structure interaction.This study provides novel molecular mechanisms regarding EV71 infection and potential molecular targets for antiviral drug design.

F-Actin reassembly during focal adhesion impacts single cell mechanics and nanoscale membrane structure

Focal adhesions play an important role in cell spreading,migration,and overall mechanical integrity.The relationship of cell structural and mechanical properties was investigated in the context of focal adhesion processes.Combined atomic force microscopy(AFM) and laser scanning confocal microscopy(LSCM) was utilized to measure single cell mechanics,in correlation with cellular morphology and membrane structures at a nanometer scale.Characteristic stages of focal adhesion were verified via confocal fluorescent studies,which confirmed three representative F-actin assemblies,actin dot,filaments network,and long and aligned fibrous bundles at cytoskeleton.Force-deformation profiles of living cells were measured at the single cell level,and displayed as a function of height deformation,relative height deformation and relative volume deformation.As focal adhesion progresses,single cell compression profiles indicate that both membrane and cytoskeleton stiffen,while spreading increases especially from focal complex to focal adhesion.Correspondingly,AFM imaging reveals morphological geometries of spherical cap,spreading with polygon boundaries,and elongated or polarized spreading.Membrane features are dominated by protrusions of 41-207 nm tall,short rods with 1-6 μm in length and 10.2-80.0 nm in height,and long fibrous features of 31-246 nm tall,respectively.The protrusion is attributed to local membrane folding,and the rod and fibrous features are consistent with bilayer decorating over the F-actin assemblies.Taken collectively,the reassembly of F-actin during focal adhesion formation is most likely responsible for the changes in cellular mechanics,spreading morphology,and membrane structural features.

Altering membrane structure to enhance water permeability and performance of anion exchange membrane fuel cell

Water management has been proven significant for enhancing both performance and durability of anion exchange membrane fuel cell. Besides searching new material, decreasing membrane thickness and modifying operation parameters, a simple and universal method of altering membrane structure is proposed in this work. Composite membranes made by unique processing method that includes both casting and electrospinning processes were compared with traditional casting membrane, all with the same thickness of 40 μm. Comparing to traditional casting membrane, the composite membrane put at proper position shows a higher water permeability, thus even more than 50% enhancement of the peak performance.

Effects of Irradiation on the Structure-activity Relationship of Konjac Glucomannan Molecular Chain Membrane

To know the effects of irradiation on the konjac glucomannan （KGM） molecular chain membrane, KGM membrane solution was treated with the irradiation dose of 0-20 kGy in this study, and the structure and properties of KGM membrane were analyzed with Infrared spectrum, Raman spectrum, X-ray, SEM scanning and so on. The results revealed that the effects of different irradiation doses on the KGM molecular chain structure were different. Higher irradiation dose （20 kGy） resulted in partial damage against KGM membrane crystal structure, and there was no obvious change for the amorphous structure; with membrane property test, the tensile strength of KGM membrane gradually increased with the increase of irradiation dose and its elongation at break reduced, but these changes were not significant, WVP value reduced; with SEM, the membrane surface treated with irradiation was smoother even than the membrane without treatment. In addition, when increasing the irradiation dose, membrane surface became more even, and arrangement was more orderly and compact. KGM membrane nrooerties, and it is an ideal Irradiation modification could effectively improve the modification method.

COUPLING COMPUTATION OF THE FLOW FIELD AND THE LARGE DEFORMATION OF MEMBRANE STRUCTURE OF STRATOSPHERE AIRSHIPS

In this article, the mathematical model of the coupling of the three-dimensional fluid flow and the large deformation of membrane structure is established. The fluid-structure coupling interaction is simulated using the computational codes developed by the authors. By analyzing the interactions of membrane and flow field, the aeroelasticity of the airship is detailed. All the results are adopted in the focused study of the stratosphere airship in trimmed state.

Second Shape Finding Analysis of Membrane Structures

A second shape finding method was developed to improve the nonlinear finite element based shape finding method. The curved shape is obtained by raising the control points above the projection plane. The convergence was improved using pseudo material properties to get a preliminary shape, and then using the real properties to get the final shape. A large number of examples were analyzed to verify the validity and practicality of this method. The results show that the final curved surface after the second shape finding process is always quite similar to the first one. Moreover, the curved surface obtained after the second shape finding process is accurate and will be realized in real materials.

STRUCTURE AND EXPRESSION OF EPSTEIN-BARR VIRUS MEMBRANE ANTIGEN IN RECOMBINANT VACCINIA VIRUS

The Epstein-Barr virus membrane antigen was constructed and inserted into vaccinia virus, Tian-tan strain in order to study the effect of this virus on EB infection and tumorogenesis. The EBV-derived membrane antigen was expressed under the control of a 7.5 K promoter of vaccinia virus. The antibody against the membrane antigen of EB virus was produced on rabbits vaccinated with recombinant vaccinia virus.

Experiment and evaluation of wrinkling strain in a corner tensioned square membrane

Prediction of wrinkling characteristics is strongly correlated with the strain perpendicular to wrinkling direc- tion. In this paper, the strain field of wrinkled membrane is tested by VIC-3D system based on the digital image correlation technique. Experimental results are validated by the tension wrinkling simulation. The experimental strain perpendicular to wrinkling direction is analyzed in depth. The wrinkling strain of a square wrinkled membrane under corner tension is extracted from experimental strain perpendicular to wrinkling direction. A quantitative characterization format of the experimental wrinkling strain is proposed. A modified prediction method of wrinkling amplitude is presented based on the experimental wrinkling strain. The re- sults show that the precision of modified prediction model has improved 13.2% compared with the classical prediction model. The results reveal that the modified model can give an accurate prediction of the wrinkling amplitude.

Design and research of gymnasium structure in Zhejiang University

This paper deals with the issues involved during the design of a complex gymnasium located at the new campus of Zhejiang University. The complexity comes from the gymnasium’s being of three parts: long-span membrane structure, prestressed concrete structure and extraordinarily long tubular steel structure without seams. The paper first presents considera- tions of the prestress design, followed by analyses of the stress states due to temperature changes and concrete shrinkage. Buckling and postbuckling analyses were performed to determine the load-carrying capacity of the perfect and imperfect tubular steel structure of the inclined arch system, while dynamic relaxation method and general nonlinear finite element analysis were used to carry out shape-finding and stress analyses of the membrane structure respectively. Finally, collated monitoring date was applied to control the construction quality and verify the design parameters. Some useful conclusions are available at the end of the paper.