Coupled bio-chemo-hydro-mechanical modeling of microbially induced calcite precipitation process considering biomass encapsulation using a micro-scale relationship

Geomaterials with inferior hydraulic and strength characteristics often need improvement to enhance their engineering behaviors.Traditional ground improvement techniques require enormous mechanical effort or synthetic chemicals.Sustainable stabilization technique such as microbially induced calcite precipitation(MICP)utilizes bacterial metabolic processes to precipitate cementitious calcium carbonate.The reactive transport of biochemical species in the soil mass initiates the precipitation of biocement during the MICP process.The precipitated biocement alters the hydro-mechanical performance of the soil mass.Usually,the flow,deformation,and transport phenomena regulate the biocementation technique via coupled bio-chemo-hydro-mechanical(BCHM)processes.Among all,one crucial phenomenon controlling the precipitation mechanism is the encapsulation of biomass by calcium carbonate.Biomass encapsulation can potentially reduce the biochemical reaction rate and decelerate biocementation.Laboratory examination of the encapsulation process demands a thorough analysis of associated coupled effects.Despite this,a numerical model can assist in capturing the coupled processes influencing encapsulation during the MICP treatment.However,most numerical models did not consider biochemical reaction rate kinetics accounting for the influence of bacterial encapsulation.Given this,the current study developed a coupled BCHM model to evaluate the effect of encapsulation on the precipitated calcite content using a micro-scale semiempirical relationship.Firstly,the developed BCHM model was verified and validated using numerical and experimental observations of soil column tests.Later,the encapsulation phenomenon was investigated in the soil columns of variable maximum calcite crystal sizes.The results depict altered reaction rates due to the encapsulation phenomenon and an observable change in the precipitated calcite content for each maximum crystal size.Furthermore,the permeability and deformation of the soil mass were affected by the simultaneous precipitation of calcium carbonate.Overall,the present study comprehended the influence of the encapsulation of bacteria on cement morphology-induced permeability,biocement-induced stresses and displacements.

Numerical Analysis of a Spiral-groove Dry-gas Seal Considering Micro-scale Effects

A dry-gas seal system is a non-contact seal technology that is widely used in different industrial applications.Spiral-groove dry-gas seal utilizes fluid dynamic pressure effects to realize the seal and lubrication processes,while forming a high pressure gas film between two sealing faces due to the deceleration of the gas pumped in or out.There is little research into the effects and the influence on seal performance,if the grooves and the gas film are at the micro-scale.This paper investigates the micro-scale effects on spiral-groove dry-gas seal performance in a numerical solution of a corrected Reynolds equation.The Reynolds equation is discretized by means of the finite difference method with the second order scheme and solved by the successive-over-relaxation（SOR） iterative method.The Knudsen number of the flow in the sealing gas film is changed from 0.005 to 0.120 with a variation of film depth and sealing pressure.The numerical results show that the average pressure in the gas film and the sealed gas leakage increase due to micro-scale effects.The open force is enlarged,while the gas film stiffness is significantly decreased due to micro-scale effects.The friction torque and power consumption remain constant,even in low sealing pressure and spin speed conditions.In this paper,the seal performance at different rotor face spin speeds is also described.The proposed research clarifies the micro-scale effects in a spiral-groove dry-gas seal and their influence on seal performance,which is expected to be useful for the improvement of the design of dry-gas seal systems operating in the slip flow regime.

Discharge characteristics of a needle-to-plate electrode at a micro-scale gap

To understand the discharge characteristics under a gap of micrometers,the breakdown voltage and current–voltage curve are measured experimentally in a needle-to-plate electrode at a microscale gap of 3–50 μm in air.The effect of the needle radius and the gas pressure on the discharge characteristics are tested.The results show that when the gap is larger than 10 μm,the relation between the breakdown voltage and the gap looks like the Paschen curve;while below 10 μm,the breakdown voltage is nearly constant in the range of the tested gap.However,at the same gap distance,the breakdown voltage is still affected by the pressure and shows a trend similar to Paschen＇s law.The current–voltage characteristic in all the gaps is similar and follows the trend of a typical Townsend-to-glow discharge.A simple model is used to explain the non-normality of breakdown in the micro-gaps.The Townsend mechanism is suggested to control the breakdown process in this configuration before the gap reduces much smaller in air.

Recent Advances in Computational Simulation of Macro-,Meso-,and Micro-Scale Biomimetics Related Fluid Flow Problems

Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.

Dechlorination of Chlorinated Aliphatic Compounds by Micro-scale Al-Zn-Mg/Fe Powders as Advanced Zero-valent Iron

Micro-scale Al-Zn-Mg/Fe composite powders (MAF) with high reactivity and good storage properties were prepared by reducing iron onto the surface of Al-Zn-Mg alloy powders. Experimental results show that MAF as advanced zero-valent iron are highly effective for degradation of chlorinated organic compounds. The efficiency of degradation for carbon tetrachloride and perchloroethylene is higher than 99% within a period of 2 h. The efficiency of degradation for trichloroethylene by MAF after storing for one month is equivalent to that by freshly prepared nano-size zero-valent iron particles.

Fabrication of micro-scale gratings for moiré method with a femtosecond laser

Fabrication of micro gratings using a femtosecond laser exposure system is experimentally investigated for the electron moire method. Micro holes and lines are firstly etched for parameter study. Grating profile is theoretically optimized to form high quality moire patterns. For a demonstration, a parallel grating is fabricated on a specimen of quartz glass. The minimum line width and the distance between two adjacent lines are both set to be 1 μm, and the frequency of grating is 500 lines/ram. The experimental results indicate that the quality of gratings is good and the relative error of the gratings pitch is about 1.5%. Based on molte method, scanning electron microscope （SEM） moire patterns are observed clearly, which manifests that gratings fabricated with the femtosecond laser exposure is suitable for micro scale deformation measurement.

Thermoelastic vibration analysis of micro-scale functionally graded material fluid-conveying pipes in elastic medium

Micro-scale functionally graded material(FGM)pipes conveying fluid have many significant applications in engineering fields.In this work,the thermoelastic vibration of FGM fluid-conveying tubes in elastic medium is studied.Based on modified couple stress theory and Hamilton’s principle,the governing equation and boundary conditions are obtained.The differential quadrature method(DQM)is applied to investigating the thermoelastic vibration of the FGM pipes.The effect of temperature variation,scale effect of the microtubule,micro-fluid effect,material properties,elastic coefficient of elastic medium and outer radius on thermoelastic vibration of the FGM pipes conveying fluid are studied.The results show that in the condition of considering the scale effect and micro-fluid of the microtubule,the critical dimensionless velocity of the system is higher than that of the system which calculated using classical macroscopic model.The results also show that the variations of temperature,material properties,elastic coefficient and outer radius have significant influences on the first-order dimensionless natural frequency.

Response of revegetation to climate change with meso- and micro-scale remote sensing in an arid desert of China

The revegetation protection system(VPS)on the edge of the Tengger Desert can be referred to as a successful model of sand control technology in China and even the world,and there has been a substantial amount of research on revegetation stability.However,it is unclear how meso-and micro-scale revegetation activity has responded to climatic change over the past decades.To evaluate the relative influence of climatic variables on revegetation activities in a restored desert ecosystem,we analysed the trend of revegetation change from 2002 to 2015 using a satellite-derived normalized difference vegetation index(NDVI)dataset.The time series of the NDVI data were decomposed into trend,seasonal,and random components using a segmented regression method.The results of the segmented regression model indicate a changing trend in the NDVI in the VPS,changing from a decrease(−7×10−3/month)before 2005 to an increase(0.3×10−3/month)after 2005.We found that precipitation was the most important climatic factor influencing the growing season NDVI(P<0.05),while vegetation growth sensitivity to water and heat varied significantly in different seasons.In the case of precipitation reduction and warming in the study area,the NDVI of the VPS could still maintain an overall slow upward trend(0.04×10−3/month),indicating that the ecosystem is sustainable.Our findings suggest that the VPS has been successful in maintaining stability and sustainability under current climate change conditions and that it is possible to introduce the VPS in similar areas as a template for resistance to sand and drought hazards.

Micro-scale Dispersion of Air Pollutants over an Urban Setup in a Coastal Region

The dispersion is mainly governed by wind field and depends on the planetary boundary layer (PBL) dynamics. Accurate representation of the meteorological weather fields would improve the dispersion assessments. In urban areas representation of wind around the obstacles is not possible for the pollution dispersion studies using Gaussian based modeling studies. It is widely accepted that computational fluid dynamics (CFD) tools would provide reasonably good solution to produce the wind fields around the complex structures and other land scale elements. By keeping in view of the requirement for the micro-scale dispersion, a commercial CFD model PANACHE with PANEPR developed by Fluidyn is implemented to study the micro-scale dispersion of air pollution over an urban setup at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam a coastal station in the east coast of India under stable atmospheric conditions. Meso-scale module of the PANACHE model is integrated with the data generated at the site by IGCAR under RRE (Round Robin Exercise) program to develop the flow fields. Using this flow fields, CFD model is integrated to study the micro-scale dispersion. Various pollution dispersion scenarios are developed using hypothetical emission inventory during stably stratified conditions to understand the micro-scale dispersion over different locations of coastal urban set up in the IGCAR region of Kalpakkam.

Micro-scale FEM Calculation of Concrete Temperature during Production and Casting

A micro-scale finite element method(FEM) was proposed to precisely calculate the heat conduction between mortar and aggregate, and thus to accurately predict the non-uniformity of concrete pouring temperature. The concrete temperature field during vibration was also precisely calculated by accurate description of heat absorption characteristics of different parts of concrete when vibration. Based on the above method, the prediction model was used to predict the pouring temperature of a practical engineering. The comparison between actual results and simulated values shows that this method can be adopted to accurately predict the non-uniformity of concrete pouring temperature and the influence of mechanized vibration on concrete pouring temperature, and thus accurately predict pouring temperature. The control of casting temperature is crucial for preventing concrete fracture. The study provides a new method for predicting the pouring temperature of concrete structures, which has great practical value in engineering application.

Micro-Scale Motion Precision Simulation Method for a New-Type 6-DOF Micro-Manipulation Robot

A new 6-DOF micro-manipulation robot based on 3-PPTTRS parallel mechanisms in combination with flexure hinges is proposed. The design principle of the mechanism is introduced, and the kinematics analysis method based on differentiation is used to get the (inverse) kinematics equations. Then a micro-scale motion precision simulation method is proposed according to finite element analysis (FEA), and the prediction of robot’s motion precision in design phase is realized. The simulation result indicates that the 6-DOF micro-manipulation robot can meet the design specification.

A novel strategy of smart manipulation by micro-scale oscillatory networks of the reactionary zones for enhanced extreme thrust control of the next-generation solid propulsion systems

The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano-scale combustion mechanisms is essential to the development and further improvement of the next-generation technologies for extreme control of the solid propellant thrust. Both experiments and theory confirm that the micro-and nano-scale oscillatory networks excitation in the solid propellants reactionary zones is a rather universal phenomenon. In accordance with our concept,the micro-and nano-scale structures form both the fractal and self-organized wave patterns in the solid propellants reactionary zones. Control by the shape, the sizes and spacial orientation of the wave patterns allows manipulate by the energy exchange and release in the reactionary zones. A novel strategy for enhanced extreme thrust control in solid propulsion systems are based on manipulation by selforganization of the micro-and nano-scale oscillatory networks and self-organized patterns formation in the reactionary zones with use of the system of acoustic waves and electro-magnetic fields, generated by special kind of ring-shaped electric discharges along with resonance laser radiation. Application of special kind of the ring-shaped electric discharges demands the minimum expenses of energy and opens prospects for almost inertia-free control by combustion processes. Nano-sized additives will enhance self-organizing and self-synchronization of the micro-and nano-scale oscillatory networks on the nanometer scale. Suggested novel strategy opens the door for completely new ways for enhanced extreme thrust control of the solid propulsion systems.

THE SUSTAINABLE MICRO-SCALE MOVEMENT OF COMMUNITIES:CASE STUDIES OF SUBDIVIDED DEVELOPMENT AND ADAPTIVE REUSE OF SHARED SPACE IN NEW YORK CITY

1.INTRODUCTION In New York City a decline in manufacturing has propelled social and eco-nomic changes that have transformed certain districts[1,2].Unused building stock there has been the basis for adaptive reuse yielding new housing for families of varying compositions.The constant pressure of the need for affordable housing has resulted in the conversion of existing abandoned industrial structures,pro-viding a green,environmentally friendly alternative to new construction[3,4,5].Adaptive reuse provides an opportunity to bring a building up to current codes,to make the layout and building systems more appropriate and efficient,and to help revitalize neighborhoods.

A semi-analytical model for coupled flow in stress-sensitive multi-scale shale reservoirs with fractal characteristics

A large number of nanopores and complex fracture structures in shale reservoirs results in multi-scale flow of oil. With the development of shale oil reservoirs, the permeability of multi-scale media undergoes changes due to stress sensitivity, which plays a crucial role in controlling pressure propagation and oil flow. This paper proposes a multi-scale coupled flow mathematical model of matrix nanopores, induced fractures, and hydraulic fractures. In this model, the micro-scale effects of shale oil flow in fractal nanopores, fractal induced fracture network, and stress sensitivity of multi-scale media are considered. We solved the model iteratively using Pedrosa transform, semi-analytic Segmented Bessel function, Laplace transform. The results of this model exhibit good agreement with the numerical solution and field production data, confirming the high accuracy of the model. As well, the influence of stress sensitivity on permeability, pressure and production is analyzed. It is shown that the permeability and production decrease significantly when induced fractures are weakly supported. Closed induced fractures can inhibit interporosity flow in the stimulated reservoir volume (SRV). It has been shown in sensitivity analysis that hydraulic fractures are beneficial to early production, and induced fractures in SRV are beneficial to middle production. The model can characterize multi-scale flow characteristics of shale oil, providing theoretical guidance for rapid productivity evaluation.

Investigation of micro-scale shear response of sand–rubber granule mixture in terms of particle shape and grain scale deformability effects

In this study,the effects of particle shape of rigid sand and soft rubber materials on macro-scale shear response were reasoned based on micro-scale parameters.For this purpose,first,the shape properties of three different sand and two different rubber samples were quantified using image processing techniques,and the contact model parameters were calibrated through physical experiments.The direct shear test was simulated in a two-dimensional discrete element software with realistic particle forms.The soft nature of rubber particles was reflected using body-centered cubic packing with a linear-parallel bond contact model.As a result,coordination number,distribution of contact forces(i.e.,strong contact,and fabric anisotropy),and contact sliding were derived by the numerical analyses.It has been observed that the particle shape leads to distinctive micro-scale responses due to the variations in the stiffness of the contacts.

Revised Chronostratigraphic Framework of the Metamorphic Strata in the Jiangnan Orogenic Belt,South China and its Tectonic Implications

In a re-study of regional geology by the China Geological Survey （CGS）, the key problem is in the stratigraphical division and correlation. According to the new isotopic dating of the Mesoand Neoproterozoic in China, there have been great changes in the strata correlation and tectonic explanation. The authors obtained four zircon sensitive high resolution ion micro-probe （SHRIMP） U- Pb datings from the bentonite of the Lengjiaxi Group （822±10 Ma, 823±12 Ma and 834±11 Ma） and Banxi Group （802.6±7.6 Ma） in north Hunan Province, which is considered to be the middle part of the Jiangnan Orogenic Belt. On the basis of the zircon dating mentioned above, the end of the Wuling orogen is first limited in the period from 822 Ma to 802 Ma in one continued outcrop （Lucheng section） in Linxiang city, Hunan Province. Combining a series of new zircon U-Pb datings in the Yangtze and Cathaysia blocks, several Neoproterozoic volcanic events and distribution of the metamorphic rocks in the Jiangnan Orogenic Belt have been distinguished. In the context of the global geodynamics, it is useful to set up a practical and high precision chronological framework and basic and unified late Precambrian section in South China.

Experimental study of a micro-scale solar organic Rankine cycle system based on compound cylindrical Fresnel lens solar concentrator

In the present study, a micro-scale solar organic Rankine cycle power generation system was developed. The system comprises of a solar collection system based on compound cylindrical Fresnel lens concentrator and an organic Rankine cycle power generation system integrated with a scroll expander. YD320 and R245 fa were used as the heat transfer fluid and the working fluid, respectively. The effects of the evaporation pressure, the degree of superheat, and the mass flow rate of the working fluid were analyzed to evaluate the solar collection efficiency, the electric power output, the thermal efficiency and exergy efficiency of the system. The results illustrate that both the increasing evaporation pressure and decreasing superheat degree have positive impacts on solar collection efficiency. The electric power increases as the evaporation pressure increases, while the thermal efficiency and the exergy efficiency decrease. However, the system overall efficiency decreases slowly due to the increase of solar collection efficiency. The electric power increases with the increment of the working fluid mass flow rate. The increasing mass flow rate has no visible impact on the thermal and exergy efficiencies of organic Rankine cycle subsystem, whereas a slightly increase of the thermal and exergy efficiencies of the integrated system. The electric power decreases with the increase of the superheat degree, whereas the thermal and the exergy efficiencies of the system increase. The system works more suitably with a higher degree of superheat for the small mass flow rate condition.

Microanalysis of Multi-Element in Juncus effusus L. by LIBS Technique

Laser-induced breakdown spectroscopy （LIBS） was used to decipher the unique multi-elemental characteristics of Juncus effusus L. The spectral fingerprints of Juncus effusus L. were established based on elemental microanalysis via LIBS. Microanalysis and multimode sampling methodologies were designed in this study. The relative standard deviation （RSD） approach was performed to optimize the multi-shot measurements. Taking advantage of the capability with no or minimal sample pre-treatment of LIBS, a thermodynamic chart of four elements （Mg, Ca, Ba, and Na） was created from twelve collection regions. The diagram of elemental distribution on a micro-scale was generated to explore the nature of Juncus effusus L. by LIBS. The results demon- strated that LIBS is a promising technique for rapid elemental microanalysis of heterogeneous samples.

Micro-scale behavior of granular materials during cyclic loading

This study presents the micro-scale behavior of granular materials under biaxial cyclic loading for differ- ent confining pressures using the two-dimensional （2D） discrete element method （DEM）. Initially, 8450 ovals were generated in a rectangular frame without any overlap. Four dense samples having confining pressures of 15, 25, 50, and 100 kPa were prepared from the initially generated sparse sample. Numeri- cal simulations were performed under biaxial cyclic loading using these isotropically compressed dense samples. The numerical results depict stress-strain-dilatancy behavior that was similar to that observed in experimental studies. The relationship between the stress ratio and dilatancy rate is almost indepen- dent of confining pressures during loading but significantly dependent on the confining pressures during unloading. The evolution of the coordination number, effective coordination number and slip coordina- tion number depends on both the confining pressures and cyclic loading. The cyclic loading significantly affects the microtopology of the granular assembly. The contact fabric and the fabric-related anisotropy are reported, as well. A strong correlation between the stress ratio and the fabric related to contact normals is observed during cyclic loading, irrespective of confining pressures.

Gas-kinetic numerical method for solving mesoscopic velocity distribution function equation

A gas-kinetic numerical method for directly solving the mesoscopic velocity distribution function equation is presented and applied to the study of three-dimensional complex flows and micro-channel flows covering various flow regimes. The unified velocity distribution function equation describing gas transport phenomena from rarefied transition to continuum flow regimes can be presented on the basis of the kinetic Boltzmann-Shakhov model equation. The gas-kinetic finite-difference schemes for the velocity distribution function are constructed by developing a discrete velocity ordinate method of gas kinetic theory and an unsteady time-splitting technique from computational fluid dynamics. Gas-kinetic boundary conditions and numerical modeling can be established by directly manipulating on the mesoscopic velocity distribution function. A new Gauss-type discrete velocity numerical integra- tion method can be developed and adopted to attack complex flows with different Mach numbers. HPF paral- lel strategy suitable for the gas-kinetic numerical method is investigated and adopted to solve three-dimensional complex problems. High Mach number flows around three-dimensional bodies are computed preliminarilywith massive scale parallel. It is noteworthy and of practical importance that the HPF parallel algorithm for solving three-dimensional complex problems can be effectively developed to cover various flow regimes. On the other hand, the gas-kinetic numerical method is extended and used to study micro-channel gas flows including the classical Couette flow, the Poiseuillechannel flow and pressure-driven gas flows in twodimensional short micro-channels. The numerical experience shows that the gas-kinetic algorithm may be a powerful tool in the numerical simulation of microscale gas flows occuring in the Micro-Electro-Mechanical System （MEMS）.