Bimetallic Ni–Co sulfides are outstanding pseudocapacitive materials with high electrochemical activity and excellent energy storage performance as electrodes for high-performance supercapacitors.In this study,a nove...Bimetallic Ni–Co sulfides are outstanding pseudocapacitive materials with high electrochemical activity and excellent energy storage performance as electrodes for high-performance supercapacitors.In this study,a novel urchin-like NiCo2S4@mesocarbon microbead(NCS@MCMB) composite with a core–shell structure was prepared by a facile two-step hydrothermal method.The highly conductive MCMBs offered abundant adsorption sites for the growth of NCS nanoneedles,which allowed each nanoneedle to fully unfold without aggregation,resulting in improved NCS utilization and efficient electron/ion transferin the electrolyte.When applied as an electrode material for supercapacitors,the composite exhibited a maximum specific capacitance of 936 Fg-1 at 1 Ag-1 and a capacitance retention of 94% after 3000 cycles at 5 Ag-1,because of the synergistic effect of MCMB and NCS.Moreover,we fabricated an asymmetric supercapacitor based on the NCS@MCMB composite,which exhibited enlarged voltage windows and could power a light-emitting diode device for several minutes,further demonstrating the exceptional electrochemical performance of the NCS@MCMB composite.展开更多
DCLR-P was prepared by direct coal liquefaction residue (DCLR) with ash removal.In the present experiments,mesocarbon microbeads (MCMBs) were prepared by co-carbonization of coal tar pitch (CTP) and DCLR-P.With the in...DCLR-P was prepared by direct coal liquefaction residue (DCLR) with ash removal.In the present experiments,mesocarbon microbeads (MCMBs) were prepared by co-carbonization of coal tar pitch (CTP) and DCLR-P.With the increase of DCLR-P content,the yield of MCMBs increased from 47.8% to 56.8%.At the same time,the particle sizes distribution of MCMBs was narrowed,resulting in the decrease of D9o/D10 ratio from 154.88 to 6.53.The results showed that DCLR-P had a positive effect on the preparation of MCMBs.1H-NMR,FTIR,SEM and XRD were used to analyze the mechanisms and characteristics of MCMBs prepared by co-carbonization of CTP and DCLR-P.The results showed that the Proton Donor Quality Index (PDQI) of DCLR-P was 13.32,significantly higher than that of CTP (0.83).This indicated that DCLR-P had more naphthenic structure than CTP,which leads to hydrogen transferring in polycondensation reaction.The aliphatic structure of DCLR-P can improve the solubility and fusibility of mesophase,thereby making the structure of MCMBs more structured.The microstructure of the graphitized MCMBs had a substantially parallel carbon layer useful for its electrical performance.The performance of graphitized MCMBs as a negative electrode material for Li-ion batteries was tested.The particle sizes,tap density,specific surface area and initial charge-discharge efficiency of graphitized MCMBs met the requirements of CMB-I in GB/T-24533-2009.However,the initial discharge capacity of graphitized MCMB was only 296.3 mA h g-1 due to the low degree of graphitization of MCMBs.展开更多
The practical application of silica-based composites as an alternative to commercial graphite anode materials is hampered by their large volumetric expansion,poor conductivity,and low Coulombic efficiency.In this work...The practical application of silica-based composites as an alternative to commercial graphite anode materials is hampered by their large volumetric expansion,poor conductivity,and low Coulombic efficiency.In this work,a novel silica/oxidized mesocarbon microbead/amorphous carbon(SiO2/O’MCMB/C)hierarchical structure in which SiO2 is sandwiched between spherical graphite and amorphous carbon shell was succes sfully fabricated through hydrogen bonding-assisted self-assembly and post-carbon coating method.The obtained three-layer hierarchical structure effectively accommodates the volumetric expansion of SiO2 and significantly enhances the electronic conductivity of composite materials.Moreover,the outer layer of amorphous carbon effectively increases the diffusion rate of lithium ions and promotes the formation of stable SEI film.As a result,the SiO2/O’MCMB/C composite exhibits superior electrochemical performance with a reversible capacity of 459.5 mA h/g in the first cycle,and the corresponding Coulombic efficiency is 62.8%.After 300 cycles,the capacity climbs to around 600 mA h/g.This synthetic route provides an efficient method for preparing SiO2 supported on graphite with excellent electrochemical performance,which is likely to promote its commercial applications.展开更多
In situ prepared mesocarbon microbead/carbon nanotube(MCMB/CNT) composites are potential precursors of high density carbon materials for various applications. Integrated MCMB/CNT composites were successfully fabricate...In situ prepared mesocarbon microbead/carbon nanotube(MCMB/CNT) composites are potential precursors of high density carbon materials for various applications. Integrated MCMB/CNT composites were successfully fabricated by hot-press sintering at 550 ℃ under 30 MPa. After further calcination at 900 ℃, the hot-press sintering fabricated MCMB block has an apparent density of 1.77 g/cm3 and the open porosity 5.1%. With the addition of 5%(mass fraction) CNTs, the density of the composite block is elevated to 1.84 g/cm3, and its open porosity is reduced to 3.5%. The flexural strength of composite block with 5% CNTs is elevated to 116 MPa. Through the hot-press sintering, pores of 10-50 nm in the calcinated bulks are remarkably eliminated. The interstice between microbeads in the composite blocks is filled up by CNTs together with β-resin and quinoline-insoluble spheres, which can further contribute to the densification.展开更多
通过对MCMB为负极、LiCoO2为正极、金属锂为参比电极的AA型三电极锂离子电池的性能测试及正负极对锂参比电极的电位测试,并结合X R D和SEM实验,研究了过放电对MCMB-LiCoO2锂离子电池性能的影响。结果表明:当M CMB-LiCoO2电池过放至0.0伏...通过对MCMB为负极、LiCoO2为正极、金属锂为参比电极的AA型三电极锂离子电池的性能测试及正负极对锂参比电极的电位测试,并结合X R D和SEM实验,研究了过放电对MCMB-LiCoO2锂离子电池性能的影响。结果表明:当M CMB-LiCoO2电池过放至0.0伏时,负极MCMB表面上的SEI膜被损坏,集流体铜箔的腐蚀溶解较严重,再次形成的SEI膜的性能可能较差,这使负极阻抗增大,极化增强,相应地使电池在过放电以后的循环过程中的放电容量、放电电压和充放电效率大为降低。但过放电对MCMB的结构和正极性能没有影响。展开更多
基金jointly supported by the National Natural Science Foundations of China(No.51572246)the Fundamental Research Funds for the Central Universities(Nos.2652017401 and 2652015425)
文摘Bimetallic Ni–Co sulfides are outstanding pseudocapacitive materials with high electrochemical activity and excellent energy storage performance as electrodes for high-performance supercapacitors.In this study,a novel urchin-like NiCo2S4@mesocarbon microbead(NCS@MCMB) composite with a core–shell structure was prepared by a facile two-step hydrothermal method.The highly conductive MCMBs offered abundant adsorption sites for the growth of NCS nanoneedles,which allowed each nanoneedle to fully unfold without aggregation,resulting in improved NCS utilization and efficient electron/ion transferin the electrolyte.When applied as an electrode material for supercapacitors,the composite exhibited a maximum specific capacitance of 936 Fg-1 at 1 Ag-1 and a capacitance retention of 94% after 3000 cycles at 5 Ag-1,because of the synergistic effect of MCMB and NCS.Moreover,we fabricated an asymmetric supercapacitor based on the NCS@MCMB composite,which exhibited enlarged voltage windows and could power a light-emitting diode device for several minutes,further demonstrating the exceptional electrochemical performance of the NCS@MCMB composite.
基金Supported by National Key Research and Development Program of China(2018YFB0604601)and the Technology Innovation Fund of China coal research institute(2016CX01).
文摘DCLR-P was prepared by direct coal liquefaction residue (DCLR) with ash removal.In the present experiments,mesocarbon microbeads (MCMBs) were prepared by co-carbonization of coal tar pitch (CTP) and DCLR-P.With the increase of DCLR-P content,the yield of MCMBs increased from 47.8% to 56.8%.At the same time,the particle sizes distribution of MCMBs was narrowed,resulting in the decrease of D9o/D10 ratio from 154.88 to 6.53.The results showed that DCLR-P had a positive effect on the preparation of MCMBs.1H-NMR,FTIR,SEM and XRD were used to analyze the mechanisms and characteristics of MCMBs prepared by co-carbonization of CTP and DCLR-P.The results showed that the Proton Donor Quality Index (PDQI) of DCLR-P was 13.32,significantly higher than that of CTP (0.83).This indicated that DCLR-P had more naphthenic structure than CTP,which leads to hydrogen transferring in polycondensation reaction.The aliphatic structure of DCLR-P can improve the solubility and fusibility of mesophase,thereby making the structure of MCMBs more structured.The microstructure of the graphitized MCMBs had a substantially parallel carbon layer useful for its electrical performance.The performance of graphitized MCMBs as a negative electrode material for Li-ion batteries was tested.The particle sizes,tap density,specific surface area and initial charge-discharge efficiency of graphitized MCMBs met the requirements of CMB-I in GB/T-24533-2009.However,the initial discharge capacity of graphitized MCMB was only 296.3 mA h g-1 due to the low degree of graphitization of MCMBs.
基金supported by the National Key Research and Development Program of China (No.2016YFB0100511)
文摘The practical application of silica-based composites as an alternative to commercial graphite anode materials is hampered by their large volumetric expansion,poor conductivity,and low Coulombic efficiency.In this work,a novel silica/oxidized mesocarbon microbead/amorphous carbon(SiO2/O’MCMB/C)hierarchical structure in which SiO2 is sandwiched between spherical graphite and amorphous carbon shell was succes sfully fabricated through hydrogen bonding-assisted self-assembly and post-carbon coating method.The obtained three-layer hierarchical structure effectively accommodates the volumetric expansion of SiO2 and significantly enhances the electronic conductivity of composite materials.Moreover,the outer layer of amorphous carbon effectively increases the diffusion rate of lithium ions and promotes the formation of stable SEI film.As a result,the SiO2/O’MCMB/C composite exhibits superior electrochemical performance with a reversible capacity of 459.5 mA h/g in the first cycle,and the corresponding Coulombic efficiency is 62.8%.After 300 cycles,the capacity climbs to around 600 mA h/g.This synthetic route provides an efficient method for preparing SiO2 supported on graphite with excellent electrochemical performance,which is likely to promote its commercial applications.
基金Project(10332020) supported by the National Natural Science Foundation of China
文摘In situ prepared mesocarbon microbead/carbon nanotube(MCMB/CNT) composites are potential precursors of high density carbon materials for various applications. Integrated MCMB/CNT composites were successfully fabricated by hot-press sintering at 550 ℃ under 30 MPa. After further calcination at 900 ℃, the hot-press sintering fabricated MCMB block has an apparent density of 1.77 g/cm3 and the open porosity 5.1%. With the addition of 5%(mass fraction) CNTs, the density of the composite block is elevated to 1.84 g/cm3, and its open porosity is reduced to 3.5%. The flexural strength of composite block with 5% CNTs is elevated to 116 MPa. Through the hot-press sintering, pores of 10-50 nm in the calcinated bulks are remarkably eliminated. The interstice between microbeads in the composite blocks is filled up by CNTs together with β-resin and quinoline-insoluble spheres, which can further contribute to the densification.
文摘通过对MCMB为负极、LiCoO2为正极、金属锂为参比电极的AA型三电极锂离子电池的性能测试及正负极对锂参比电极的电位测试,并结合X R D和SEM实验,研究了过放电对MCMB-LiCoO2锂离子电池性能的影响。结果表明:当M CMB-LiCoO2电池过放至0.0伏时,负极MCMB表面上的SEI膜被损坏,集流体铜箔的腐蚀溶解较严重,再次形成的SEI膜的性能可能较差,这使负极阻抗增大,极化增强,相应地使电池在过放电以后的循环过程中的放电容量、放电电压和充放电效率大为降低。但过放电对MCMB的结构和正极性能没有影响。
