Theoretical characterization of the temperature-dependent saturation magnetization of magnetic metallic materials

Based on the force-heat equivalence energy density principle,a theoretical model for magnetic metallic materials is developed,which characterizes the temperature-dependent magnetic anisotropy energy by considering the equivalent relationship between magnetic anisotropy energy and heat energy;then the relationship between the magnetic anisotropy constant and saturation magnetization is considered.Finally,we formulate a temperature-dependent model for saturation magnetization,revealing the inherent relationship between temperature and saturation magnetization.Our model predicts the saturation magnetization for nine different magnetic metallic materials at different temperatures,exhibiting satisfactory agreement with experimental data.Additionally,the experimental data used as reference points are at or near room temperature.Compared to other phenomenological theoretical models,this model is considerably more accessible than the data required at 0 K.The index included in our model is set to a constant value,which is equal to 10/3 for materials other than Fe,Co,and Ni.For transition metals(Fe,Co,and Ni in this paper),the index is 6 in the range of 0 K to 0.65T_(cr)(T_(cr) is the critical temperature),and 3 in the range of 0.65T_(cr) to T_(cr),unlike other models where the adjustable parameters vary according to each material.In addition,our model provides a new way to design and evaluate magnetic metallic materials with superior magnetic properties over a wide range of temperatures.

A review on in vitro corrosion performance test of biodegradable metallic materials

Extensive in vitro corrosion test systems have been carried out to simulate the in vivo corrosion behavior of biodegradable metallic materials. Various methods have their own unique benefits and limitations. The corrosion mechanism of biodegradable alloys and in vitro corrosion test systems on biodegradable metallic materials are reviewed, to build a reasonable simulated in vitro test system for mimicking the in vivo animal test from the aspects of electrolyte solution selection, surface roughness influence, test methods and evaluation methodology of corrosion rate. Buffered simulated body fluid containing similar components to human blood plasma should be applied as electrolyte solution, such as simulated body fluid （SBF） and culture medium with serum. Surface roughness of samples and ratio of solution volume to sample surface area should be adopted based on the real implant situation, and the dynamic corrosion is preferred. As to the evaluation methodology of corrosion rate, different methods may complement one another.

EFFECT OF STRAIN RATE(?) ON STRAIN HARDENING EXPONENT n OF SOME METALLIC MATERIALS

Variable strain rate tension tests for 4 metallic materials show that as the strain rate in creases the strain hardening exponent n decreases. The trend follows a two stage linear relation between n and Ig (?). When (?) < (?)cp, i.e. under quasi-static loading, n can be considered as a constant, but when (?)>(?)cp, n decreases rapidly till an ideal plastic state. n = 0. The characterizations and mechanisms of softening induced by high (?) are discussed.

Degree of polarization based on the three-component pBRDF model for metallic materials

An expression of degree of polarization（DOP） for metallic material is presented based on the three-component polarized bidirectional reflectance distribution function（p BRDF） model with considering specular reflection, directional diffuse reflection and ideal diffuse reflection. The three-component p BRDF model with a detailed reflection assumption is validated by comparing simulations with measurements. The DOP expression presented in this paper is related to surface roughness, which makes it more reasonable in physics. Test results for two metallic samples show that the DOP based on the three-component p BRDF model accords well with the measurement and the error of existing DOP expression is significantly reduced by introducing the diffuse reflection. It indicates that our DOP expression describes the polarized reflection properties of metallic surfaces more accurately.

Model of bidirectional reflectance distribution function for metallic materials

Based on the three-component assumption that the reflection is divided into specular reflection,directional diffuse reflection,and ideal diffuse reflection,a bidirectional reflectance distribution function（BRDF） model of metallic materials is presented.Compared with the two-component assumption that the reflection is composed of specular reflection and diffuse reflection,the three-component assumption divides the diffuse reflection into directional diffuse and ideal diffuse reflection.This model effectively resolves the problem that constant diffuse reflection leads to considerable error for metallic materials.Simulation and measurement results validate that this three-component BRDF model can improve the modeling accuracy significantly and describe the reflection properties in the hemisphere space precisely for the metallic materials.

Novel Ring Compression Test Method to Determine the Stress-Strain Relations and Mechanical Properties of Metallic Materials

Although there are methods for testing the stress-strain relation and strength,which are the most fundamental and important properties of metallic materials,their application to small-volume materials and tube components is lim-ited.In this study,based on energy density equivalence,a new dimensionless elastoplastic load-displacement model for compressed metal rings with isotropy and constitutive power law is proposed to describe the relations among the geometric dimensions,Hollomon law parameters,load,and displacement.Furthermore,a novel test method was developed to determine the elastic modulus,stress-strain relation,yield and tensile strength via ring compression test.The universality and accuracy of the method were verified within a wide range of imaginary materials using finite element analysis(FEA),and the results show that the stress-strain curves obtained by this method are consistent with those inputted in the FEA program.Additionally,a series of ring compression tests were performed for seven metallic materials.It was found that the stress-strain curves and mechanical properties predicted by the method agreed with the uniaxial tensile results.With its low material consumption,the ring compression test has the potential to be as an alternative to traditional tensile test when direct tension method is limited.

South China University of fechnology Advanced Metallic Materials Research and Processing Technology Center

A dvanced Metallic Materials Research and Processing Technology Center was found in December 1998. As a unit under The College of Mechanical Engineering, the Center is an expansion of the former Cast and Composite Materials Research Group, which was found in the early eighties of last century. The Center is focusing in the basic and applied research, and development of advanced metallic materials and their processing technology. It also functions as an organization

Continued Diagnostic Difficulties in Preoperatively Differentiating Lipiodized Oil and Residual Metallic Material: A Case Report

Retained foreign objects in the abdomen and pelvis are serious clinical problems yet the imaging required can present difficulties. Prolonged retention of lipiodized oil used for hysterosalpingography over years is very rare. However, lipiodized oil had previously been misdiagnosed as residual metallic material. We are reporting a case in which the latest computed tomography (CT) equipment seemed inadequate for obtaining a clear pre-operative diagnosis. Here, we describe the case of a 33-year-old Japanese female whose pelvis had contained retained lipiodized oil that had been suspected as residual metallic material. The preoperative diagnosis was very difficult and included three-dimensional computed tomography (3D-CT) of unclear results despite expectations of resolution. By laparoscopic surgery, we removed a cyst of approximately 2 cm containing a yellowish oily fluid. Postoperatively, we demonstrated that the fluid was lipiodized oil. A postoperative experiment to attempt distinguishing lipiodized oil from metal through gemstone spectral CT imaging did not offer clarity either. Distinguishing between retained lipiodized oil and metallic material in the abdominal cavity may still present unexpected difficulties even with the latest medical equipments.

Capillary Property of Entangled Porous Metallic Wire materials and Its Application in Fluid Buffers:Theoretical Analysis and Experimental Study

Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of equipment.Based on the capillary property entangled porous metallic wire materials(EPMWM),this paper designed a composite buffer which uses EPMWM and viscous fluid as cushioning materials under the low-speed impact of the recoil force device of weapon equipment(such as artillery,mortar,etc.).Combined with the capillary model,porosity,hydraulic diameter,maximum pore diameter and pore distribution were used to characterize the pore structure characteristics of EPMWM.The calculation model of the damping force of the composite buffer was established.The low-speed impact test of the composite buffer was conducted.The parameters of the buffer under low-speed impact were identified according to the model,and the nonlinear model of damping force was obtained.The test results show that the composite buffer with EPMWM and viscous fluid can absorb the impact energy from the recoil movement effectively,and provide a new method for the buffer design of weapon equipment(such as artillery,mortar,etc.).

A Review of Anode Materials for Dual‑Ion Batteries

Distinct from"rockingchair"lithium-ion batteries(LIBs),the unique anionic intercalation chemistry on the cathode side of dual-ion batteries(DIBs)endows them with intrinsic advantages of low cost,high voltage,and ecofriendly,which is attracting widespread attention,and is expected to achieve the next generation of large-scale energy storage applications.Although the electrochemical reactions on the anode side of DIBs are similar to that of LIBs,in fact,to match the rapid insertion kinetics of anions on the cathode side and consider the compatibility with electrolyte system which also serves as an active material,the anode materials play a very important role,and there is an urgent demand for rational structural design and performance optimization.A review and summarization of previous studies will facilitate the exploration and optimization of DIBs in the future.Here,we summarize the development process and working mechanism of DIBs and exhaustively categorize the latest research of DIBs anode materials and their applications in different battery systems.Moreover,the structural design,reaction mechanism and electrochemical performance of anode materials are briefly discussed.Finally,the fundamental challenges,potential strategies and perspectives are also put forward.It is hoped that this review could shed some light for researchers to explore more superior anode materials and advanced systems to further promote the development of DIBs.

Mechanical behavior of entangled metallic wire materials-polyurethane interpenetrating composites

Composite materials exhibit the impressive mechanical properties of high damping and stiffness,which cannot be attained by employing conventional single materials.Along these lines,a novel material architecture is presented in this work in order to fabricate composites with enhanced mechanical characteristics.More specifically,entangled metallic wire materials were used as the active matrix,whereas polyurethane was employed as the reinforcement elements.As a result,an entangled metallic wire material-polyurethane composite with high damping and stiffness was prepared by enforcing the vacuum infiltration method.On top of that,the mechanical properties(loss factor,energy consumption,and average stiffness)of the proposed composite materials were characterized by performing dynamic tests,and its fatigue characteristics were verified by the micro-interface bonding,as well as the macro-damage factor.The impact of the density,preloading spacing,loading amplitude,and exciting frequency on the mechanical properties of the composites were also thoroughly analyzed.The extracted results indicate that the mechanical properties of the composites were significantly enhanced than those of the pure materials due to the introduction of interface friction.Moreover,the average stiffness of the composites was about 10 times the respective value of the entangled metallic wire material.Interestingly,a rise in the loading period leads to some failure between the composite interfaces,which reduces the stiffness property but enhances the damping dissipation properties.Finally,a comprehensive dynamic mechanical model of the composites was established,while it was experimentally verified.The proposed composites possess higher damping features,i.e.,stiffness characteristics,and maintain better fatigue characteristics,which can broaden the application range of the composites.In addition,we provide a theoretical and experimental framework for the research and applications in the field of metal matrix composites.

Quasi-static and low-velocity impact mechanical behaviors of entangled porous metallic wire material under different temperatures

To improve the defense capability of military equipment under extreme conditions,impact-resistant and high-energy-consuming materials have to be developed.The damping characteristic of entangled porous metallic wire materials(EPMWM)for vibration isolation was previously investigated.In this paper,a study focusing on the impact-resistance of EPMWM with the consideration of ambient temperature is presented.The quasi-static and low-velocity impact mechanical behavior of EPMWM under different temperatures(25℃-300℃)are systematically studied.The results of the static compression test show that the damping energy dissipation of EPMWM increases with temperature while the nonlinear damping characteristics are gradually enhanced.During the impact experiments,the impact energy loss rate of EPMWM was between 65%and 85%,while the temperatures increased from 25℃to 300℃.Moreover,under the same drop impact conditions,the overall deformation of EPMWM decreases in the temperature range of 100℃-200℃.On the other hand,the impact stiffness,energy dissipation,and impact loss factor of EPMWM significantly increase with temperature.This can be attributed to an increase in temperature,which changes the thermal expansion coefficient and contact state of the internal wire helixes.Consequently,the energy dissipation mode(dry friction,air damping,and plastic deformation)of EPMWM is also altered.Therefore,the EPMWM may act as a potential candidate material for superior energy absorption applications.

Numerical and experimental evaluation for density-related thermal insulation capability of entangled porous metallic wire material

Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great significance to reveal the thermal response mechanism of EPMWM based on its complex structural effects.In the present work,virtual manufacturing technology(VMT)was developed to restore the physics-based 3D model of EPMWM.On this basis,the transient thermal analysis is carried out to explore the contact-relevant thermal behavior of EPMWM,and then the spiral unit containing unique structural information are further extracted and counted.In particular,the thermal resistance network is numerically constructed based on the spiral unit through the thermoelectric analogy method to accurately predict the effective thermal conductivity(ETC)of EPMWM.Finally,the thermal diffusivity and specific heat of the samples were obtained by the laser thermal analyzer to calculate the ETC and thermal insulation factor of interest.The results show that the ETC of EPMWM increases with increasing temperature or reducing density under the experimental conditions.The numerical prediction is consistent with the experimental result and the average error is less than 4%.

The Anti-Penetration Performance and Mechanism of Metal Materials:A Review

This article reviews the anti-penetration principles and strengthening mechanisms of metal materials,ranging from macroscopic failure modes to microscopic structural characteristics,and further summarizes the micro-macro correlation in the anti-penetration process.Finally,it outlines the constitutive models and numerical simulation studies utilized in the field of impact and penetration.From the macro perspective,nine frequent penetration failure modes of metal materials are summarized,with a focus on the analysis of the cratering,compression shear,penetration,and plugging stages of the penetration process.The reasons for the formation of adiabatic shear bands(ASBs)in metal materials with different crystal structures are elaborated,and the formation mechanism of the equiaxed grains in the ASB is explored.Both the strength and the toughness of metal materials are related to the materials’crystal structures and microstructures.The toughness is mainly influenced by the deformation mechanism,while the strength is explained by the strengthening mechanism.Therefore,the mechanical properties of metal materials depend on their microstructures,which are subject to the manufacturing process and material composition.Regarding numerical simulation,the advantages and disadvantages of different constitutive models and simulation methods are summarized based on the application characteristics of metal materials in high-speed penetration practice.In summary,this article provides a systematic overview of the macroscopic and microscopic characteristics of metal materials,along with their mechanisms and correlation during the anti-penetration and impact-resistance processes,thereby making an important contribution to the scientific understanding of anti-penetration performance and its optimization in metal materials.

Experimental study on the influences of cutter geometry and material on scraper wear during shield TBM tunnelling in abrasive sandy ground

When shield TBM tunnelling in abrasive sandy ground,the rational design of cutter parameters is critical to reduce tool wear and improve tunnelling efficiency.However,the influence mechanism of cutter parameters on scraper wear remains unclear due to the lack of a reliable test method.Geometry and material optimisation are often based on subjective experience,which is unfavourable for improving scraper geological adaptability.In the present study,the newly developed WHU-SAT soil abrasion test was used to evaluate the variation in scraper wear with cutter geometry,material and hardness.The influence mechanism of cutter parameters on scraper wear has been revealed according to the scratch characteristics of the scraper surface.Cutter geometry and material parameters have been optimised to reduce scraper wear.The results indicate that the variation in scraper wear with cutter geometry is related to the cutting resistance,frictional resistance and stress distribution.An appropriate increase in the front angle(or back angle)reduces the cutting resistance(or frictional resistance),while an excessive increase in the front angle(or back angle)reduces the edge angle and causes stress concentration.The optimal front angle,back angle and edge angle for quartz sand samples areα=25°,β=10°andγ=55°,respectively.The wear resistance of the modelled scrapers made of different metal materials is related to the chemical elements and microstructure.The wear resistances of the modelled scrapers made of 45#,06Cr19Ni10,42CrMo4 and 40CrNiMoA are 0.569,0.661,0.691 and 0.728 times those made of WC-Co,respectively.When the alloy hardness is less than 47 HRC(or greater than 58 HRC),scraper wear decreases slowly with increasing alloy hardness as the scratch depth of the particle asperity on the metal surface stabilizes at a high(or low)level.However,when the alloy hardness is between 47 HRC and 58 HRC,scraper wear decreases rapidly with increasing alloy hardness as the scratch depth transitions from high to low levels.The sensitive hardness interval and recommended hardness interval for quartz sand are[47,58]and[58,62],respectively.The present study provides a reference for optimising scraper parameters and improving cutterhead adaptability in abrasive sandy ground tunnelling.

Twin-roll strip casting of advanced metallic materials

Metallic materials have historic and served as critical enablers of human progress,wealth,and wellbeing over millennia.Recently,the global demand for the development of environment-friendly and energy-saving technology has been increasing,with the aim to support the sustainability of metallic materials.Twin-roll strip casting(TRC)is one of the most cutting-edge technologies and a near-net-shape manufacturing method in the steel industry,which conforms to the green fabrication trend of next-generation high-performance metallic materials.By utilizing the dominant characteristics of sub-rapid solidification,and integration of solidification,solid-state transformation,and deformation;TRC has become a meaningful way to deal with the most challenging issues in the processing of metallic materials,and made a significant contribution to materials manufacturing.Hence,we review the TRC process of various metallic materials,including plain carbon steels,stainless steels,Fe-Si electrical steels,high-strength steels,clad steels,aluminum alloys,magnesium alloys,metallic glasses,and so on.This paper offers an outlook of future opportunities for various advanced metallic materials development through the TRC process,and inspires more in-depth research.

Research perspective and prospective of additive manufacturing of biodegradable magnesium-based materials

Biodegradable metals such as magnesium(Mg)and its alloys have attracted extensive attention in biomedical research due to their excellent mechanical properties and biodegradability.However,traditional casting,extrusion,and commercial processing have limitations in manufacturing components with a complex shape/structure,and these processes may produce defects such as cavities and gas pores which can degrade the properties and usefulness of the products.Compared to conventional techniques,additive manufacturing(AM)can be used to precisely control the geometry of workpieces made of different Mg-based materials with multiple geometric scales and produce desirable medical products for orthopedics,dentistry,and other fields.However,a detailed and thorough understanding of the raw materials,manufacturing processes,properties,and applications is required to foster the production of commercial Mg-based biomedical components by AM.This review summarizes recent advances and important issues pertaining to AM of Mg-based biomedical products and discusses future development and application trends.

Recent advances in tribological and wear properties of biomedical metallic materials

Biomedical metallic materials are commonly used in the repair and replacement of human tissues.After the materials are implanted in the human body,the implants can rub against human tissue or other implants,resulting in wear and tear of the implants.The wear and tear of implants in the human body can lead to osteolysis and inflammation,which can affect the longevity of the implant and human health.For the sake of human health and the longevity of implants,it is essential to study the frictional and wear properties of biomedical metallic materials.The present review summarizes the current research on the frictional and wear properties of biomedical metallic materials in recent years,as well as the methods and techniques to improve the frictional and wear properties of the materials.The significance of the present review lies in that it could provide momentus information for further investigation of the tribological properties of biomedical metallic materials.

Research of Electromagnetic Field on Several Metallic Materials and Processing

The research activities in EPM for several metallic materials are classified in the application of different magnetic field.The following research is exhibited in this article,(1)Effect of magnetic field on solidification process of monotectic alloys;(2)Effect of high magnetic field on fabrication of high-strength and high-conductivity copper alloys;(3)Numerical simulation of magnetic field and fluid flow in continuous casting mold with vertical electromagnetic brake;(4)Research on solidification structure of superalloy with EMS;(5)Effects of static magnetic field on the behavior of meniscus in a mold under argon gas injection.