Genesis, metallogenic model, and prospecting prediction of the Nibao gold deposit in the Guizhou Province, China

Southwestern Guizhou province is one of China’s most important distribution areas of Carlin-type gold deposits. The Nibao deposit is a typical gold deposit in southwestern Guizhou. To elucidate the genesis of the Nibao gold deposit, establish a metallogenic model, and guide prospecting prediction, we systematically collected previously reported geological, geochemical, and dating data and discussed the genesis of the Nibao gold deposit,based on which we proposed the metallogenic model.Earlier works show that the Nibao anticline, F1 fault, and its hanging wall dragged anticline(Erlongqiangbao anticline) were formed before or simultaneously with gold mineralization, while F2, F3, and F4 faults postdate gold mineralization. Regional geophysical data showed extensive low resistivity anomaly areas near the SBT(the product of tectonic slippage and hydrothermal alteration)between the P2/P3 and the strata of the Longtan Formation in the SSE direction of Nibao anticline in the lower plate of F1 and hanging wall dragged anticline(Erlongqiangbao anticline), and the anomaly areas are distributed within the influence range of anticlines. Simultaneously, soil and structural geochemistry show that F1, Nibao anticline,Erlongqiangbao anticline, and their transition areas all show good metallogenic elements(Au, As, and S) assemblage anomalies, with good metallogenic space and prospecting possibilities. There are five main hypotheses about the source of ore-forming fluids and Au in the Nibao gold deposit:(1) related to the Emeishan mantle plume activity;(2) source from the Emeishan basalt;(3) metamorphic fluid mineralization;(4) basin fluid mineralization;(5) related to deep concealed magmatic rocks;of these, the mainstream understanding is the fifth speculation. It is acknowledged that the ore-forming fluids are hydrothermal fluids with medium–low temperature, high pressure, medium–low salinity, low density, low oxygen fugacity, weak acidity, weak reduction, and rich in CO_(2)and CH_(4). The fluid pressure is 2–96.54 MPa, corresponding to depths of 0.23–3.64 km. The dating results show that the metallogenic age is ~141 Ma, the extensional tectonic environment related to the westward subduction of the Pacific Plate. Based on the above explanation, the genetic model related to deep concealed magmatic rocks of the Nibao gold deposit is established, and favorable prospecting areas are outlined;this is of great significance for regional mineral exploration and studying the genesis of gold deposits.

Origin and Superposition Metallogenic Model of the Sandstone-type Uranium Deposit in the Northeastern Ordos Basin,China

This paper deals with the metallogenic model of the sandstone type uranium deposit in the northeastern Ordos Basin from aspects of uranium source, migration and deposition. A superposition metallogenic model has been established due to complex uranium mineralization processes with superposition of oil-gas reduction and thermal reformation.

Metallogenic model of the Shuangjianzishan Ag-Pb-Zn district,Northeast China:Revealed from integrated geophysical investigation

The Shuangjianzishan deposit in Inner Mongolia is a typical Ag-Pb-Zn deposit of the southern Great Xing’an Range.Proven reserves of Ag,Pb,and Zn in this deposit have reached the scale of super-large deposits,with favorable metallogenic conditions,strong prospecting signs,and high metallogenic potential.This paper reports a study involving integrated geophysical methods,including controlled-source audio-frequency magnetotelluric,gravity,magnetic,and shallow-seismic-reflection methods,to determine the spatial distribution of ore-controlling structures and subsurface intrusive rock for a depth range of<2000 m in the Shuangjianzishan ore district.The objective of this study is to construct a metallogenic model of the ore district and provide a scientific basis for the exploration of similar deposits in the deep and surrounding regions.We used three-dimensional inversion for controlled-source audio-frequency magnetotelluric data based on the limited memory quasi-Newton algorithm,and three-dimensional physical-property inversion for the gravity and magnetic data to obtain information about the subsurface distribution of ore-controlling structures and intrusive rocks.Under seismic reflection results,regional geology,petrophysical properties,and borehole information,the geophysical investigation shows that the Dashizhai group,which contains the main ore-bearing strata in the ore district,is distributed within a depth range of<1239 m,and is thick in the Xinglongshan ore block and the eastern part of the Shuangjianzishan ore block.The mineralization is spatially associated with a fault system characterized by NE-,NW-,and N-trending faults.The magnetic and electrical models identify large,deep bodies of intrusive rock that are inferred to have been involved in mineralization,with local shallow emplacement of some intrusions.Combining the subsurface spatial distributions of ore-bearing strata,ore-controlling faults,and intrusive rock,we propose two different metallogenic models for the Shuangjianzishan ore district,which provide a scientific basis for further prospecting in the deep regions of the ore district and surrounding areas.

Sulfide metallogenic model for the ultraslow-spreading Southwest Indian Ridge

Polymetallic sulfides present in mid-ocean ridges(MORs)have become important strategic resources for humans,and a scientific metallogenic model is necessary for the investigation and exploration of these resources.Compared to fast-and slow-spreading MORs,ultraslow-spreading MORs show substantial differences in magma supply,tectonic activity,and oceanic crust structures.However,information on hydrothermal circulation and a metallogenic model related to sulfides along the ultraslow-spreading ridges is still limited,which hinders further exploration of these resources.In this study,the distribution of hydrothermal activities,as well as the characteristics of the structures,heat sources,fluid pathways,host rock types,fluid properties,and sulfide assemblages in typical hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge(SWIR),have been studied.It is concluded that the hydrothermal systems along the SWIR can be categorized into three types,including local enhanced magma-controlled,one-way detachment/high-angle large-offset fault-controlled,and flip-flop detachment-controlled types,which are further categorized into five subtypes based on their distinct geological backgrounds.Herein,we present a sulfide metallogenic model called Local Enhanced Heat Supply-Deep Faults(eHeat-dFault)for the SWIR.The overall spreading rate remains almost constant(14-18 mm/year),while the magma supply is heterogeneous in the segment scale along the SWIR.Over the past two decades,various hydrothermal systems and sulfide deposits have been identified along the SWIR.A deep magma chamber(4-9 km)is developed in the ridge segment with sufficient magma supply owing to the local enhanced magma supply,while long-lived active deep detachment faults(up to 13 km)with associated metallogenic belts are developed in ridge segments with poor magma supply.Hence,the ultraslow-spreading MORs fulfill the necessary conditions of a sustained heat source and stable hydrothermal pathway for the formation of large-scale polymetallic sulfide deposits.The number of hydrothermal fields detected in the investigation area is 2-3 times that predicted by the traditional Spreading Rate-Magma Flux model,demonstrating its significant endowment for sulfide resources.A balance between magma supply and faulting may influence the type and depth of hydrothermal circulation,the frequency of hydrothermal activity along the axis,and the scale of sulfide deposits.Spreading rate was previously believed to control heat sources,magma supply,and tectonic processes.However,for the SWIR,we suggest that local enhanced heat supply and deep detachment faults have a greater influence than the spreading rate on hydrothermal circulation and sulfide mineralization.The eHeat-dFault sulfide metallogenic model proposed herein could provide guidance for further exploration and research on polymetallic sulfides in ultraslow-spreading SWIR.

METALLOGENIC EVOLUTION AND MODEL OF MANZHOULI-XINBAERHU METALLOGENIC PROVINCE

This area is a superlarge potentiality metallogenic province of multimetal resource,belonging to Ergun accretionary fold system of early Caledonian.The regional basement(Neoproterozoic-Lower Cambrian Series)is the outer extent of the Siberian craton margin,and the metallization in this area was affected intensely by Pacific plate tectonics.The NE trending Ergun-Hulun deep-seated fracture controls the giant volcano-magmatic activty and mineralization in this area.NW cross trending tenso-shear fractures control the formation of ore cluster in this area.The major types of ore deposits in this area are porphyry type,subvolcanic hydrothermal vein type and skarn type.They are the products of different depths and environments as genetically-related,which can be collectively regarded as porphyry copper-multimetal metallogenic series.

Metallogenic Features and Metalogenic Model of Laterite Gold Deposits in Southern China

The modern laterite gold deposits in southern China, which belong to reworked laterite deposits, can be further divided into three subclasses and seven types. Their geological features, ore-forming conditions and regularities are discussed. A geologic-geochemical metallogenic model for laterite gold deposits has been established.

Emanation-Sedimentary Metallogenic Series and Models of the Proterozoic Rift in the Kangdian Axis

The Kangdian axis basement can be divided into two tectonic layers. The lower tectonic layer is the crystalline basement which is made up of the Archaean Dibadu Formation and early Proterozoic Dahongshan Group. The former is a kata-metamorphic basic volcano-sedimentary formation of the old geosyncline (old continental nucleus), and the latter is a medium-grade metamorphosed alkali-rich basic volcanic (emanation)-sedimentary formation of the Yuanjiang-Dahongshan marginal rift. They are in disconformable contact. The upper tectonic layer is the folded basement, and made up of the middle-late Proterozoic Kunyang Group. It is the result of Dongchuan-Yuanjiang intercontinental rifting with discordant contract with the underlying and overlying strata. Along with the evolution of Proterozoic from early to late, four types of emanation-sedimentary deposits in the Kangdian axis rift were formed in turn: emanation-sedimentary iron-copper-gold deposits related to basic volcanic rocks in the Yuanmou-Dahongshan marginal rift; emanation-sedimentary iron-copper deposits related to intermediate-basic volcanic rocks in the early stage of the Dongnchuan-Yuanjiang intercontinental rift; emanation-sedimentary copper deposits related to sedimentary rocks in the middle stage; copper deposits related to the late tectonic reworking. From early to late Proterozoic, with the evolution of the Kangdian axis rift and lowering volcanic basicity, the ore-forming elements also evolved from Fe, Cu and (Au) through Cu and Fe to Cu.

Geology and mineralization of the Dongping supergiant alkalic-hosted Au-Te deposit(>100 t Au)in Northern Hebei Province,China:A review

The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.

Ore-forming and Exploration Models of the Baguamiao Gold Deposit,Shaanxi Province

The Baguamiao superlarge gold deposit in Shaanxi Province is one of the typical cases in China that are hosted by sedimentary rocks. Explorers and researchers have discussed the gold mineralization enrichment conditions by studying sulphur, oxygen, carbon, silicon stable isotopes and mineralizing fluid features of the Baguamiao gold deposit and proposed a hydrothermal sedimentation-magmatic reconstructing gold mineralization model featuring multi-sources of ore-forming materials and multistage mineralizations. In addition, prospecting for “Baguamiao-type” gold deposits was started in the Fengtai Basin and a great number of important prospecting targets such as Tonglinggou, Simaoling, Guoansi and Dachaigou were discovered.

Deep Mineralization Background and Metallogenic Regularity of the Tongling Ore District

Based on the geological conditions and characteristics of mineralization present,three-dimensional geological modelling is used in conjunction with previous deep research results,in order to discuss the process of deep mineralization in the Tongling ore district.The structural analysis shows that surface deformation is strong,deep deformation is weak,the surface has mainly experienced brittle deformation,with the possibility of a large number of deep ductile deformations.There is a thrust nappe between the Tongling uplift and the Nanling basin,that is the boundary of the Tongling block,which has resulted in the southwest uplift of the Tongling block.Combined with the deep exploration data,the threedimensional shape of the main rock masses is interpreted,with three-layer structures in the deep magma chamber.The spatial distribution of magmatic rocks is mainly controlled by the structure.The movement of magmatic hydrothermal fluid is dominated by mesoscale seepage in the deep part and'dike'type upwelling in the shallow part.There is a certain coupling relationship between the ore-forming rock mass and the surrounding rock.The ore-forming age is dominated by the Yanshanian period.Based on the distribution,types and metallogenic characteristics of the deposits,the metallogenic model of'layer coupling'in the Tongling ore district is summarized,with the'one body,two belts and a multilayer metallogenic system'is established,which is significant for the future direction of deep prospecting in the Tongling area.

Metallogenic Dynamics of Zhashui Ag－Pb Polymetallic Ore Deposit in Shaanxi，China

Zhashui Ag-Pb polymetallic ore deposit is located in northern Qinling geosyncline. In this paper, its geological features and metallogenic background are introduced. The volcanic dynamics,physical-chemical conditions of metallogeny and ore-forming experimental simulation are discussed in detail. Based on the existence of paleovolcanic activity, the protolith characters and geochemistry of ore-bearing rock series, the authors study the law of volcanic activity in Middle Devonian period. The Physical-chemical conditions of metallogeny. including temperature, pressure, pH and Eh of mineralizing solution, are also determined. The evolution of salinity, f(O2), pH, M (H2S), M(SO2-4) (M is mole fraction of certain component ), t (temperature) and a(ionic activity)of mineralizing solution suggests that the mineralization was a long-term dynamic process. Finally, the metallogenic pattern is established.

Crustal Electrical Structure and Deep Metallogenic Potential in Northern Wuyi Area(South China),based on Magnetotelluric Data

The northern Wuyi area,which is located in the northern Wuyi metallogenic belt,has superior mineralization conditions.The Pingxiang-Guangfeng-Jiangshan-Shaoxing fault(PSF)extends across the whole region regardless of whether or how the PSF relates to the near-surface mineralization.We carried out an MT survey in the region and obtained a reliable 2D model of the crustal electrical structure to a depth of 30 km.In the resistivity model,we inferred that a continuous high conductivity belt that ranges from the shallow to deep crust is a part of the PSF.Then,we estimated the fluid content and pressure gradient to identify the deep sources of fluid as well as its pattern of motion pattern.Finally,we proposed a model for the deep metallogenic migration processes that combines geological data,fluid content data,pressure gradient data,and the subsurface resistivity model.The model analysis showed that the Jiangnan orogenic belt and the Cathaysia block formed the PSF during the process of com.The deep fluid migrated upward through the PSF to the shallow crust.Therefore,we believe that the PSF is an ore-forming fluid migration channel and that it laid the material basis for large-scale mineralization in the shallow crust.

Geology and mineralization of the Daheishan supergiant porphyry molybdenum deposit(1.65 Bt),Jilin,China:A review

The Daheishan supergiant porphyry molybdenum deposit(also referred to as the Daheishan deposit)is the second largest molybdenum deposit in Asia and ranks fifth among the top seven molybdenum deposits globally with total molybdenum reserves of 1.65 billion tons,an average molybdenum ore grade of 0.081%,and molybdenum resources of 1.09 million tons.The main ore body is housed in the granodiorite porphyry plutons and their surrounding inequigranular granodiorite plutons,with high-grade ores largely located in the ore-bearing granodiorite porphyries in the middle-upper part of the porphyry plutons.Specifically,it appears as an ore pipe with a large upper part and a small lower part,measuring about 1700 m in length and width,extending for about 500 m vertically,and covering an area of 2.3 km^(2).Mineralogically,the main ore body consists of molybdenite,chalcopyrite,and sphalerite horizontally from its center outward and exhibits molybdenite,azurite,and pyrite vertically from top to bottom.The primary ore minerals include pyrite and molybdenite,and the secondary ore minerals include sphalerite,chalcopyrite,tetrahedrite,and scheelite,with average grades of molybdenum,copper,sulfur,gallium,and rhenium being 0.081%,0.033%,1.67%,0.001%,and 0.0012%,respectively.The ore-forming fluids of the Daheishan deposit originated as the CO_(2)-H_(2)O-NaCl multiphase magmatic fluid system,rich in CO_(2)and bearing minor amounts of CH4,N2,and H2S,and later mixed with meteoric precipitation.In various mineralization stages,the ore-forming fluids had homogenization temperatures of>420℃‒400℃,360℃‒350℃,340℃‒230℃,220℃‒210℃,and 180℃‒160℃and salinities of>41.05%‒9.8%NaCleqv,38.16%‒4.48%NaCleqv,35.78%‒4.49%NaCleqv,7.43%NaCleqv,and 7.8%‒9.5%NaCleqv,respectively.The mineralization of the Daheishan deposit occurred at 186‒167 Ma.The granites closely related to the mineralization include granodiorites(granodiorite porphyries)and monzogranites(monzogranite porphyries),which were mineralized after magmatic evolution(189‒167 Ma).Moreover,these mineralization-related granites exhibit low initial strontium content and high initial neodymium content,indicating that these granites underwent crust-mantle mixing.The Daheishan deposit formed during the Early-Middle Jurassic,during which basaltic magma underplating induced the lower-crust melting,leading to the formation of magma chambers.After the fractional crystallization of magmas,ore-bearing fluids formed.As the temperature and pressure decreased,the ore-bearing fluids boiled drops while ascending,leading to massive unloading of metal elements.Consequently,brecciated and veinlet-disseminated ore bodies formed.

Genesis of sandstone-type uranium deposits along the northern margin of the Ordos Basin,China

Sandstone-type U mineral resources are among the important sources for nuclear energy.The U deposits in the Ordos Basin in China form part of the northern segment of the sandstone-hosted Central Asian Uranium MegaProvince.Two types of mineralizations are recognized in this basin:"phreatic permeable type"and"interlayer permeable type",both exhibiting features equivalent to roll-front subtypes.The"interlayer permeable type"is widely accepted as the dominant mineralization type for sandstone-type uranium deposits within large-scale basins,also designated as the"interlayer oxidation zone type",based on the horizontal color zoning model representing changing redox conditions.Here we synthesize data from several drill holes within the Ordos Basin,which suggest that major Mesozoic tectonic movements controlled the evolution of the sedimentary system in the basin.These tectonic movements contributed to the formation of three angular unconformities and four parallel unconformities as inferred from the stratigraphic relationships.In addition,other features such as vertical color zoning,paleo-channel controlled tabular or lentoid ore bodies(without roll-type)and a group interlayer horizontal zoning of altered minerals are also documented.Sequence stratigraphic analysis indicates that the Ordos Basin generally witnessed four cycles of water level variations during Mesozoic.During the variations,three high water level and three low water level events were recorded.Biological characteristics imply that the Ordos Basin went through multiple arid to humid climatic evolutions during Mesozoic.Combining the newly documented features with some novel concepts on the hydrodynamic mechanism for supergene ore-forming fluids,we propose a metallogenic model which invokes the importance of tectonic movements and water level fluctuations to explain the genesis of uranium deposits along the northern margin of the Ordos Basin.

Geology and mineralization of the Sanshandao supergiant gold deposit(1200 t)in the Jiaodong Peninsula,China:A review

The Jiaodong Peninsula in Shandong Province,China is the world’s third-largest gold metallogenic area,with cumulative proven gold resources exceeding 5000 t.Over the past few years,breakthroughs have been made in deep prospecting at a depth of 500‒2000 m,particularly in the Sanshandao area where a huge deep gold orebody was identified.Based on previous studies and the latest prospecting progress achieved by the project team of this study,the following results are summarized.(1)3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield,which was previously considered to consist of several independent deposits,is a supergiant deposit with gold resources of more than 1200 t(including 470 t under the sea area).The length of the major orebody is nearly 8 km,with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction.(2)Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined,forming a stepped metallogenic model from shallow to deep level.The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults,the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed.Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure,these sections along the fault plane serve as the target areas for deep prospecting.(3)Thermal uplifting-extensional structures provide thermodynamic conditions,migration pathways,and deposition spaces for gold mineralization.Meanwhile,the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks.This further led to the reactivation of ore-forming elements,which provided rich materials for gold mineralization.(4)It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma,which was superimposed by nonferrous metals mineralization at 118‒111 Ma.The fluids were dominated by primary mantle water or magmatic water.Metamorphic water occurred in the early stage of the gold mineralization,while the fluid composition was dominated by meteoric water in the late stage.The S,Pb,and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks,indicating that the ore-forming materials mainly derive from crustal materials,with the minor addition of mantle-derived materials.The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle,which is different from typical orogenic gold deposits.Thus,it is proposed that they are named“Jiaodong-type”gold deposits.

Mantle Branch Structure in the South-Central Segment of the Da Hinggan Mts.,Inner Mongolia and Its Ore-controlling Role

Mantle branch structure is the third tectonic unit of multiple evolution of a mantle branch. It is not only the main mechanism of intercontinental orogeny, but also an important ore-forming and ore-control structure. Studies on geotectonic evolution, regional geological characteristics and oreforming and ore-control structures have shown that since the Mesozoic the Da Hinggan Mts. region has entered a typical intercontinental orogenic stage, and it is closely related to mantle branch activities. The south-central segment of the Da Hinggan Mts. is a typical mantle branch structure and possesses obvious magmatic-metamorphic complexes in the core, detachment slip beds in the periphery and overlapped fault depression basins. Moreover, all of these are the principal factors leading to ore formation and ore control in the region. This paper also further explores the mechanism of mineralization in the south-central segment of the Da Hinggan, summaries the rules of mineralization, puts forward the models of mineralization and points out future ore-exploring orientation.

Geology and mineralization of the Dayin’gezhuang supergiant gold deposit(180 t)in the Jiaodong Peninsula,China:A review

The Dayin’gezhuang gold deposit is located in the central part of the Zhaoping Fault metallogenic belt in the Jiaodong gold province-the world’s third-largest gold metallogenic area.It is a typical successful case of prospecting at a depth of 500-2000 m in recent years,with cumulative proven gold resources exceeding 180 t.The main orebodies(No.1 and No.2 orebody)generally have a pitch direction of NNE and a plunge direction of NEE.As the ore-controlling fault,the Zhaoping Fault is a shovel-shaped stepped fault,with its dip angle presenting stepped high-to-low transitions at the elevation of -2000-0 m.The gold mineralization enrichment area is mainly distributed in the step parts where the fault plane changes from steeply to gently,forming a stepped metallogenic pattern from shallow to deep.It can be concluded from previous studies that the gold mineralization of the Dayin’gezhuang gold deposit occurred at about 120 Ma.The ore-forming fluids were H_(2)O-CO_(2)-NaCl-type hydrothermal solutions with a medium-low temperature and medium-low salinity.The H-O isotopic characteristics indicate that the fluids in the early ore-forming stage were possibly magmatic water or mantle water and that meteoric water gradually entered the ore-forming fluids in the late ore-forming stage.The S and Pb isotopes indicate that the ore-forming materials mainly originate from the lower crust and contain a small quantity of mantle-derived components.The comprehensive analysis shows that the Dayin’gezhuang gold deposit was formed by thermal uplifting-extensional tectonism.The strong crust-mantle interactions,large-scale magmatism,and the material exchange arising from the transformation from adakitic granites to arc granites and from the ancient lower crust to the juvenile lower crust during the Early Cretaceous provided abundant fluids and material sources for mineralization.Moreover,the detachment faults formed by the rapid magmatic uplift and the extensional tectonism created favorable temperature and pressure conditions and space for fluid accumulation and gold precipitation and mineralization.

Uranium mineralization formed through multi-stage superposition: Case of the Qianjiadian deposit in Songliao Basin, China

The Qianjiadian uranium deposit is located in the Kailu Depression of Songliao Basin.It is a large-scale in-situ leachable uranium deposit of sandstone type and provides a typical case of the uranium deposits in the Songliao Basin.Here we analyze the impact of oil and gas on reduction alteration,and factors including low grade mineralization.The Qianjiadian uranium deposit is characterized as a typical rolltype deposit with interlayers in oxidized zone.The occurrence of reductive low-permeability sandstone in uranium reservoirs controls the morphology of the uranium-rich orebody.We propose a metallogenic model involving multi-stage superposition characterized by“primary sediment enrichment-interlayer oxidation-superimposed transformation”.Our model would be helpful for formulating guidelines in the exploration for sandstone-type uranium deposits in the Songliao Basin.

The Evolutionary History of Ore-forming Processes of Metallic Ore Deposits in Northern Guangxi

The northern Guangxi region is an important rare metal, rare earth metal and polymetallic metallogenic province. In the region there exist five metallogenic series and two metallogenic subseries, whose metallogenesis shows features of polycyclic spiral evolution throughout the geological history. As far as various cycles are concerned, mantle-derived ore substances were reduced while crust-derived ore substances increased from early to late timesfin the whole geological evolutionary history, mantle-derived substances decreased gradually while crust-derived ones increased. Meanwhile ore element associations became more and more varied. In terms of space, mineralization migrated from the old basement outwards, i.e. from west to east during the Precambrian, and from north to south during the Phanerozoic, and again from east to west during the Yanshanian.

Geochemistry and Mineralization of the Permian Bauxites with Contrast Bedrocks in Northern Guizhou,South China

A succession of Permian bauxite deposits are concentrated in Wuchuan,Zheng’an and Daozhen counties of northern Guizhou,South China.These deposits overlie contrast bedrocks,which are discriminated from the other bauxites of karst type in South China.Horizons of these bauxites are typified by sandwiched constructure,the upper and the lower layers of bauxitic claystone interbedded by the ore layer,and by abundant pyrite occurring in the ore and the lower layers.A geochemical study was carried out on samples from two boreholes of bauxitic profiles with claystone and carbonate bedrocks,respectively.It shows that the diverse profiles illustrate contrast mobility of elements.The profile overlying clayey bedrock is depleted in most elements including REE but variously enriched in HFSE,Pb,Mo,and half mass of Al2O3was leached out;the profile overlying carbonatic bedrock is highly enriched in REE and moderately in HFSE and Pb,its Al2O3mass was basically preserved.Both horizons are extremely enriched in alkali of Li and variously in Ce.A new genetic model is suggested accordingly.Tropic climate,coastal plain and frequent transgression and regression during the Permian caused a transition of weathering profiles from laterization to bauxitization in northern Guizhou.Massive pyrite in the horizons formed under reducing environment during the transgression through combining of iron enriched in the laterite profile and sulfur from the soaking and penetrating seawater;during the regression,oxidation of pyrite caused strong acid medium and induced the bauxitization.