Catalytic decomposition of methylene chloride in air below 300℃ was studied. Sulfated titania was very effective in converting 959ppm methylene chloride selectively to CO, C02 and HCl. Complete decomposition of methy...Catalytic decomposition of methylene chloride in air below 300℃ was studied. Sulfated titania was very effective in converting 959ppm methylene chloride selectively to CO, C02 and HCl. Complete decomposition of methylene chloride was achieved at low temperature (275℃ ). It was found that the acidic property of catalyst was a determinant factor for the catalytic activity. The presence of water vapor in the feed stream remarkably reduced the catalytic activity, which could be due to the blockage of acidic sites on the surface of catalyst by water molecules. A bifunctional catalyst comprising copper oxide was developed to improve the selectivity of catalytic oxidation , which indicated that copper oxide can promote the deep oxidation of methylene chloride. The crystal form of TiO2 imposes an important influence upon the catalytic oxidation.展开更多
Hydrogels of dimethylaminoethyl acrylate methyl chloride quaternary salt (Q9) have been synthesized with different monomer ratio by copolymerization of this poorly studied monomer either with acrylic acid or with 2-me...Hydrogels of dimethylaminoethyl acrylate methyl chloride quaternary salt (Q9) have been synthesized with different monomer ratio by copolymerization of this poorly studied monomer either with acrylic acid or with 2-methylene bu-tane-1,4-dioic acid. Hydrogel swelling was measured as a function of the composition of the hydrogel and of the crosslinking agent ratio. High values of swelling have been obtained at very high crosslinking values (【14 wt %) and the equilibrium swelling was reached at very low time (less than 15 minutes). The swelling isotherms consisted of a steep initial portion and then levelled off as asymptotically to the equilibrium swelling limit. The experimental data suggest clearly that the swelling process obeys second-order kinetics. According to this, the kinetics rate constant and the equilibrium water content were determined at different comonomer composition and crosslinker concentration. The calculated kinetic constants ranged from 0.48 to 3.76 ×10-2 min-1 for poly (acrylic acid-co-Q9) hydrogels and from 0.68 to 4.0 ×10-2 min-1 for poly (2-methylene butane-1,4-dioic acid-co-Q9) hydrogels depending on the hydrogels composition. The diffusion process was evaluated for each hydrogel showing a non-Fickian type diffusion. In all cases was observed a considerable increase in diffusion coefficient as Q9 content increases.展开更多
Environmental protection has become a concern for the world. For this reason, the objective of this work is to remove methylene blue adsorbed on activated carbon. The coal used comes from cocoa pod shells. Before pyro...Environmental protection has become a concern for the world. For this reason, the objective of this work is to remove methylene blue adsorbed on activated carbon. The coal used comes from cocoa pod shells. Before pyrolysis, the shells were ground, sieved and impregnated with orthophosphoric acid. Before desorption, the activated carbons were initially saturated with MB. These saturated coals were brought into contact with a sodium chloride (NaCl) solution and then stirred. The evolution of the resorbed MB concentration was monitored by spectrophotometry. The desorption tests showed a remarkable elimination from the first 10 minutes. The desorption kinetics comprises two phases: a rapid kinetics between 0 and 30 minutes and a slow kinetics between 30 and 60 minutes. The desorption of the dye reaches a concentration aqual to 0.84 mg/l at pH = 4 at temperature = 80°C. For modeling, the coefficient of the Langmuir II model is greater than or equal to O.9893. The model of Langmuir III is less than or equal to 0.9373. The Freundlich model coefficient is 0.9842 or less. The desorption is thefore carried out on energy-homogeneous adsorption sites and without any interaction between the adsorbed cations of the dye. Experimental parameters such as pH, temperature and concentration of sodium chloride (NaCl) solution influence the desorption of MB. And the model of Langmuir II describes well the process of desorption of the MB.展开更多
Background:Anal fistula is a long-term disease characterized by a tubular structure with one end opening in the anorectal canal and the other end opening on the surface of the perineum or perianal skin with chronic pu...Background:Anal fistula is a long-term disease characterized by a tubular structure with one end opening in the anorectal canal and the other end opening on the surface of the perineum or perianal skin with chronic pus drainage.It is linked to Bhagandar in Ayurveda,and in Sushruta Samhita,Acharya has mentioned 5 forms of Bhagandar.The boil in the present case was Shukla,sthira i.e.hard and firm,with Picchila strava and Kandu resembling the features of Parisraavi bhagandar.Aim and objective:The current case was diagnosed as Parisravi bhagandar,which resembles trans-sphincteric or intersphincteric fistula in modern ano.In Ayurveda,the management of Parisraavi Bhagandar,Shastra,kshara,and Agnikarma is advised and the use of Ksharasutra,which contributes to complete cutting and healing of the track without reoccurrence,similarly Modern surgeon depends on surgery i.e radical excision of the track,ligation with Seton,and use of chemical irritants like urethane,silver nitrates,etc.A cutting seton(tight)gently slices the confined muscle to close the fistula with the least interruption to continence.This operation is especially advised when a one-stage fistulotomy poses a considerable risk of incontinence.Material and methods:The method performed here was Core Partial Fistulectomy followed by Ksharasutra application till complete healing of the wound.Discussion and conclusion:This case study provides the successful management of Parisraavi Bhagandara(high anal,trans-sphincteric fistula in ano)in 61-year-old male patient with an integrated surgical&Ayurvedic management approach.展开更多
文摘Catalytic decomposition of methylene chloride in air below 300℃ was studied. Sulfated titania was very effective in converting 959ppm methylene chloride selectively to CO, C02 and HCl. Complete decomposition of methylene chloride was achieved at low temperature (275℃ ). It was found that the acidic property of catalyst was a determinant factor for the catalytic activity. The presence of water vapor in the feed stream remarkably reduced the catalytic activity, which could be due to the blockage of acidic sites on the surface of catalyst by water molecules. A bifunctional catalyst comprising copper oxide was developed to improve the selectivity of catalytic oxidation , which indicated that copper oxide can promote the deep oxidation of methylene chloride. The crystal form of TiO2 imposes an important influence upon the catalytic oxidation.
文摘Hydrogels of dimethylaminoethyl acrylate methyl chloride quaternary salt (Q9) have been synthesized with different monomer ratio by copolymerization of this poorly studied monomer either with acrylic acid or with 2-methylene bu-tane-1,4-dioic acid. Hydrogel swelling was measured as a function of the composition of the hydrogel and of the crosslinking agent ratio. High values of swelling have been obtained at very high crosslinking values (【14 wt %) and the equilibrium swelling was reached at very low time (less than 15 minutes). The swelling isotherms consisted of a steep initial portion and then levelled off as asymptotically to the equilibrium swelling limit. The experimental data suggest clearly that the swelling process obeys second-order kinetics. According to this, the kinetics rate constant and the equilibrium water content were determined at different comonomer composition and crosslinker concentration. The calculated kinetic constants ranged from 0.48 to 3.76 ×10-2 min-1 for poly (acrylic acid-co-Q9) hydrogels and from 0.68 to 4.0 ×10-2 min-1 for poly (2-methylene butane-1,4-dioic acid-co-Q9) hydrogels depending on the hydrogels composition. The diffusion process was evaluated for each hydrogel showing a non-Fickian type diffusion. In all cases was observed a considerable increase in diffusion coefficient as Q9 content increases.
文摘Environmental protection has become a concern for the world. For this reason, the objective of this work is to remove methylene blue adsorbed on activated carbon. The coal used comes from cocoa pod shells. Before pyrolysis, the shells were ground, sieved and impregnated with orthophosphoric acid. Before desorption, the activated carbons were initially saturated with MB. These saturated coals were brought into contact with a sodium chloride (NaCl) solution and then stirred. The evolution of the resorbed MB concentration was monitored by spectrophotometry. The desorption tests showed a remarkable elimination from the first 10 minutes. The desorption kinetics comprises two phases: a rapid kinetics between 0 and 30 minutes and a slow kinetics between 30 and 60 minutes. The desorption of the dye reaches a concentration aqual to 0.84 mg/l at pH = 4 at temperature = 80°C. For modeling, the coefficient of the Langmuir II model is greater than or equal to O.9893. The model of Langmuir III is less than or equal to 0.9373. The Freundlich model coefficient is 0.9842 or less. The desorption is thefore carried out on energy-homogeneous adsorption sites and without any interaction between the adsorbed cations of the dye. Experimental parameters such as pH, temperature and concentration of sodium chloride (NaCl) solution influence the desorption of MB. And the model of Langmuir II describes well the process of desorption of the MB.
文摘Background:Anal fistula is a long-term disease characterized by a tubular structure with one end opening in the anorectal canal and the other end opening on the surface of the perineum or perianal skin with chronic pus drainage.It is linked to Bhagandar in Ayurveda,and in Sushruta Samhita,Acharya has mentioned 5 forms of Bhagandar.The boil in the present case was Shukla,sthira i.e.hard and firm,with Picchila strava and Kandu resembling the features of Parisraavi bhagandar.Aim and objective:The current case was diagnosed as Parisravi bhagandar,which resembles trans-sphincteric or intersphincteric fistula in modern ano.In Ayurveda,the management of Parisraavi Bhagandar,Shastra,kshara,and Agnikarma is advised and the use of Ksharasutra,which contributes to complete cutting and healing of the track without reoccurrence,similarly Modern surgeon depends on surgery i.e radical excision of the track,ligation with Seton,and use of chemical irritants like urethane,silver nitrates,etc.A cutting seton(tight)gently slices the confined muscle to close the fistula with the least interruption to continence.This operation is especially advised when a one-stage fistulotomy poses a considerable risk of incontinence.Material and methods:The method performed here was Core Partial Fistulectomy followed by Ksharasutra application till complete healing of the wound.Discussion and conclusion:This case study provides the successful management of Parisraavi Bhagandara(high anal,trans-sphincteric fistula in ano)in 61-year-old male patient with an integrated surgical&Ayurvedic management approach.
