Magnesium ion batteries(MIBs)are a potential field for the energy storage of the future but are restricted by insufficient rate capability and rapid capacity degradation.Magnesium-sodium hybrid ion batteries(MSHBs)are...Magnesium ion batteries(MIBs)are a potential field for the energy storage of the future but are restricted by insufficient rate capability and rapid capacity degradation.Magnesium-sodium hybrid ion batteries(MSHBs)are an effective way to address these problems.Here,we report a new type of MSHBs that use layered sodium vanadate((Na,Mn)V_(8)O_(20)·5H_(2)O,Mn-NVO)cathodes coupled with an organic 3,4,9,10-perylenetetracarboxylic diimide(PTCDI)anode in Mg^(2+)/Na^(+)hybrid electrolytes.During electrochemical cycling,Mg^(2+)and Na^(+)co-participate in the cathode reactions,and the introduction of Na^(+)promotes the structural stability of the Mn-NVO cathode,as cleared by several ex-situ characterizations.Consequently,the Mn-NVO cathode presents great specific capacity(249.9 mA h g^(−1)at 300 mA g^(−1))and cycling(1500 cycles at 1500 mA g^(−1))in the Mg^(2+)/Na^(+)hybrid electrolytes.Besides,full battery displays long lifespan with 10,000 cycles at 1000 mA g^(−1).The rate performance and cycling stability of MSHBs have been improved by an economical and scalable method,and the mechanism for these improvements is discussed.展开更多
The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency The addition of phase change materials (PCMs) to filling slurry and the use of the cold storag...The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency The addition of phase change materials (PCMs) to filling slurry and the use of the cold storage function of these materials to reduce downhole temperatures is an effective approach to alleviate the aforementioned problem.Paraffin–CaCl_(2)·6H_(2)O composite PCM was prepared in the laboratory.The composition,phase change latent heat,thermal conductivity,and cemented tailing backfill (CTB) compressive strength of the new material were studied.The heat transfer characteristics and endothermic effect of the PCM were simulated using Fluent software.The results showed the following:(1) The new paraffin–CaCl_(2)·6H_(2)O composite PCM improved the thermal conductivity of native paraffin while avoiding the water solubility of CaCl_(2)·6H_(2)O.(2) The calculation formula of the thermal conductivity of CaCl_(2)·6H_(2)O combined with paraffin was deduced,and the reasons were explained in principle.(3) The“enthalpy–mass scale model”was applied to calculate the phase change latent heat of nonreactive composite PCMs.(4)The addition of the paraffin–CaCl_(2)·6H_(2)O composite PCM reduced the CTB strength but increased its heat absorption capacity.This research can give a theoretical foundation for the use of heat storage backfill in green mines.展开更多
Based on the first and second laws of thermodynamics,the heat transfer and flow(thermohydraulic)characteristics of horizontal supercritical pressure CO_(2)(S-CO_(2))in a circular pipe under heating conditions were inv...Based on the first and second laws of thermodynamics,the heat transfer and flow(thermohydraulic)characteristics of horizontal supercritical pressure CO_(2)(S-CO_(2))in a circular pipe under heating conditions were investigated numerically.Heating flows in two different diameters(d)of 4 and 6 mm were simulated in pipes with pressures of 8 MPa,mass fluxes(G)of 300 and 400 kg/(m^(2)·s),and heat fluxes(q)of 50,75 and 100 kW/m^(2).In the d=4 mm pipe,the peak heat transfer coefficient(hb)was about 3 times higher than in the d=6 mm pipe,while the entropy production due to fluid friction in the 4 mm pipe was on average 1.1 times higher,and the entropy production due to heat transfer was on average about 67%lower.A 4 mm tube was employed to further evaluate the influence of the applied wall heat flux,the results demonstrated that the irreversibility due to heat transfer was on average more than 4 times higher when heat flux density was 100 kW/m^(2)than when the heat flux density was 50 kW/m^(2),while the peak of heat transfer coefficient increased by 1.4 times as q was decreased from 100 to 50 kW/m^(2).The effect of thermal acceleration was ignored,while the buoyancy effect resulted in secondary flow and significantly affected the flow and heat transfer features.The jet flows were found in the vicinity of the lower wall of the pipe,which made the two fields of velocity and temperature gradient more synergistic,leading to an enhancement in heat transfer in the vicinity of the upper wall.The aggravation of heat transfer resulted in high irreversibility of heat transfer in the cross-sectional area near the wall,while the local friction irreversibility was less affected by the buoyancy effect,and the distribution was uniform.The uneven distribution of thermophysical properties also confirmed that the enhanced heat transfer occurred near the wall area at the bottom of the pipe.展开更多
In the current research,a thorough examination unfolds concerning the attributes of magnetohydrodynamic(MHD)boundary layer flow and heat transfer inherent to nanoliquids derived from Sisko Al_(2)O_(3)-Eg and TiO_(2)-E...In the current research,a thorough examination unfolds concerning the attributes of magnetohydrodynamic(MHD)boundary layer flow and heat transfer inherent to nanoliquids derived from Sisko Al_(2)O_(3)-Eg and TiO_(2)-Eg compositions.Such nanoliquids are subjected to an extending surface.Consideration is duly given to slip boundary conditions,as well as the effects stemming from variable viscosity and variable thermal conductivity.The analytical approach applied involves the application of suitable similarity transformations.These conversions serve to transform the initial set of complex nonlinear partial differential equations into a more manageable assembly of ordinary differential equations.Through the utilization of the FEM,these reformulated equations are solved,considering the specified boundary conditions.The outcomes attained are graphically depicted by means of plots and tables.These visual aids facilitate a comprehensive exploration of how diverse parameters exert influence over the distributions of velocity,temperature,and concentration.Furthermore,detailed scrutiny is directed towards the fluctuations characterizing pivotal parameters,viz.,Nusselt number,skin-friction coefficient,and Sherwood number.It is identified that the Nusselt number showcases a diminishing trend coinciding with increasing values of the volume fraction parameter(φ).This trend remains consistent regardless of whether the nanoliquid under consideration is Al_(2)O_(3)-Eg or TiO_(2)-Eg based.In contrast,both the skin-friction coefficient and Sherwood number assume lower values as the volume fraction parameter(φ)escalates.This pattern remains congruent across both classifications of nanoliquids.The findings of the study impart valuable insights into the complex interplay governing the characteristics of HMT pertaining to Sisko Al_(2)O_(3)-Eg and TiO_(2)-Eg nanoliquids along an extending surface.展开更多
目的研究巴罗沙星与 DNA 的分子作用机制和 Mg^(2+)对巴罗沙星与 DNA 相互作用的影响。方法利片J荧光光谱研究巴罗沙星与 DNA 的作用强度并计算热力学数据ΔH;利用紫外光谱、黏度测定、竞争实验、与变性 DNA作用的比较等方法确定巴罗沙...目的研究巴罗沙星与 DNA 的分子作用机制和 Mg^(2+)对巴罗沙星与 DNA 相互作用的影响。方法利片J荧光光谱研究巴罗沙星与 DNA 的作用强度并计算热力学数据ΔH;利用紫外光谱、黏度测定、竞争实验、与变性 DNA作用的比较等方法确定巴罗沙星与小牛胸腺 DNA 的相互作用方式;利用荧光光谱考察 Mg^(2+)对巴罗沙星与小牛胸腺DNA 相互作用的影响。结果 DNA 对巴罗沙星的荧光猝灭常数为(5.43±0.07)×10~3L·mol^(-1),ΔH=-8.03 kJ·mol^(-1);Mg^(2+)使巴罗沙星与 DNA 的作用增强。结论巴罗沙星以沟槽键合方式与 DNA 相瓦作用;Mg^(2+)对巴罗沙星与 DNA 的结合有中介作用。展开更多
基金the financial support from the National Natural Science Foundation of China, China (22005207, 52261160384)the Guangdong Basic and Applied Basic Research Foundation, Guangdong Province, China (2019A1515011819)+2 种基金the Outstanding Youth Basic Research Project of Shenzhen, Shenzhen, China (RCYX20221008092934093)the Joint Funds of the National Natural Science Foundation of China, China (U22A20140)the Science and Technology Development Fund, Macao SAR (0090/2021/A2 and 0049/2021/AGJ)
文摘Magnesium ion batteries(MIBs)are a potential field for the energy storage of the future but are restricted by insufficient rate capability and rapid capacity degradation.Magnesium-sodium hybrid ion batteries(MSHBs)are an effective way to address these problems.Here,we report a new type of MSHBs that use layered sodium vanadate((Na,Mn)V_(8)O_(20)·5H_(2)O,Mn-NVO)cathodes coupled with an organic 3,4,9,10-perylenetetracarboxylic diimide(PTCDI)anode in Mg^(2+)/Na^(+)hybrid electrolytes.During electrochemical cycling,Mg^(2+)and Na^(+)co-participate in the cathode reactions,and the introduction of Na^(+)promotes the structural stability of the Mn-NVO cathode,as cleared by several ex-situ characterizations.Consequently,the Mn-NVO cathode presents great specific capacity(249.9 mA h g^(−1)at 300 mA g^(−1))and cycling(1500 cycles at 1500 mA g^(−1))in the Mg^(2+)/Na^(+)hybrid electrolytes.Besides,full battery displays long lifespan with 10,000 cycles at 1000 mA g^(−1).The rate performance and cycling stability of MSHBs have been improved by an economical and scalable method,and the mechanism for these improvements is discussed.
基金financial support provided by the National Natural Science Foundation of China (No. 52174106)the Key Technology Research and Development Program (No. 2022YFC2905102)。
文摘The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency The addition of phase change materials (PCMs) to filling slurry and the use of the cold storage function of these materials to reduce downhole temperatures is an effective approach to alleviate the aforementioned problem.Paraffin–CaCl_(2)·6H_(2)O composite PCM was prepared in the laboratory.The composition,phase change latent heat,thermal conductivity,and cemented tailing backfill (CTB) compressive strength of the new material were studied.The heat transfer characteristics and endothermic effect of the PCM were simulated using Fluent software.The results showed the following:(1) The new paraffin–CaCl_(2)·6H_(2)O composite PCM improved the thermal conductivity of native paraffin while avoiding the water solubility of CaCl_(2)·6H_(2)O.(2) The calculation formula of the thermal conductivity of CaCl_(2)·6H_(2)O combined with paraffin was deduced,and the reasons were explained in principle.(3) The“enthalpy–mass scale model”was applied to calculate the phase change latent heat of nonreactive composite PCMs.(4)The addition of the paraffin–CaCl_(2)·6H_(2)O composite PCM reduced the CTB strength but increased its heat absorption capacity.This research can give a theoretical foundation for the use of heat storage backfill in green mines.
基金supported by the European Union’s Horizon 2020 Research and Innovation Programme Project(No.882628)(Guo,https://cinea.ec.europa.eu/programmes/horizon-europe_en)(acceseed on 08 October 2024),and the Fundamental Research Funds for the Central Universities(buctrc202406)(Guo,https://english.buct.edu.cn/)(accessed on 08 October 2024).
文摘Based on the first and second laws of thermodynamics,the heat transfer and flow(thermohydraulic)characteristics of horizontal supercritical pressure CO_(2)(S-CO_(2))in a circular pipe under heating conditions were investigated numerically.Heating flows in two different diameters(d)of 4 and 6 mm were simulated in pipes with pressures of 8 MPa,mass fluxes(G)of 300 and 400 kg/(m^(2)·s),and heat fluxes(q)of 50,75 and 100 kW/m^(2).In the d=4 mm pipe,the peak heat transfer coefficient(hb)was about 3 times higher than in the d=6 mm pipe,while the entropy production due to fluid friction in the 4 mm pipe was on average 1.1 times higher,and the entropy production due to heat transfer was on average about 67%lower.A 4 mm tube was employed to further evaluate the influence of the applied wall heat flux,the results demonstrated that the irreversibility due to heat transfer was on average more than 4 times higher when heat flux density was 100 kW/m^(2)than when the heat flux density was 50 kW/m^(2),while the peak of heat transfer coefficient increased by 1.4 times as q was decreased from 100 to 50 kW/m^(2).The effect of thermal acceleration was ignored,while the buoyancy effect resulted in secondary flow and significantly affected the flow and heat transfer features.The jet flows were found in the vicinity of the lower wall of the pipe,which made the two fields of velocity and temperature gradient more synergistic,leading to an enhancement in heat transfer in the vicinity of the upper wall.The aggravation of heat transfer resulted in high irreversibility of heat transfer in the cross-sectional area near the wall,while the local friction irreversibility was less affected by the buoyancy effect,and the distribution was uniform.The uneven distribution of thermophysical properties also confirmed that the enhanced heat transfer occurred near the wall area at the bottom of the pipe.
文摘In the current research,a thorough examination unfolds concerning the attributes of magnetohydrodynamic(MHD)boundary layer flow and heat transfer inherent to nanoliquids derived from Sisko Al_(2)O_(3)-Eg and TiO_(2)-Eg compositions.Such nanoliquids are subjected to an extending surface.Consideration is duly given to slip boundary conditions,as well as the effects stemming from variable viscosity and variable thermal conductivity.The analytical approach applied involves the application of suitable similarity transformations.These conversions serve to transform the initial set of complex nonlinear partial differential equations into a more manageable assembly of ordinary differential equations.Through the utilization of the FEM,these reformulated equations are solved,considering the specified boundary conditions.The outcomes attained are graphically depicted by means of plots and tables.These visual aids facilitate a comprehensive exploration of how diverse parameters exert influence over the distributions of velocity,temperature,and concentration.Furthermore,detailed scrutiny is directed towards the fluctuations characterizing pivotal parameters,viz.,Nusselt number,skin-friction coefficient,and Sherwood number.It is identified that the Nusselt number showcases a diminishing trend coinciding with increasing values of the volume fraction parameter(φ).This trend remains consistent regardless of whether the nanoliquid under consideration is Al_(2)O_(3)-Eg or TiO_(2)-Eg based.In contrast,both the skin-friction coefficient and Sherwood number assume lower values as the volume fraction parameter(φ)escalates.This pattern remains congruent across both classifications of nanoliquids.The findings of the study impart valuable insights into the complex interplay governing the characteristics of HMT pertaining to Sisko Al_(2)O_(3)-Eg and TiO_(2)-Eg nanoliquids along an extending surface.
文摘目的研究巴罗沙星与 DNA 的分子作用机制和 Mg^(2+)对巴罗沙星与 DNA 相互作用的影响。方法利片J荧光光谱研究巴罗沙星与 DNA 的作用强度并计算热力学数据ΔH;利用紫外光谱、黏度测定、竞争实验、与变性 DNA作用的比较等方法确定巴罗沙星与小牛胸腺 DNA 的相互作用方式;利用荧光光谱考察 Mg^(2+)对巴罗沙星与小牛胸腺DNA 相互作用的影响。结果 DNA 对巴罗沙星的荧光猝灭常数为(5.43±0.07)×10~3L·mol^(-1),ΔH=-8.03 kJ·mol^(-1);Mg^(2+)使巴罗沙星与 DNA 的作用增强。结论巴罗沙星以沟槽键合方式与 DNA 相瓦作用;Mg^(2+)对巴罗沙星与 DNA 的结合有中介作用。
