This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy w...This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy with high strength and formability.With the increase of Zn content,forming the coupling distribution of multiscale precipitates and iron-rich phases with a reasonable matching ratio and dispersion distribution characteristics is easy.This phenomenon induces the formation of cell-like structures with alternate distribu-tion of coarse and fine grains,and the average plasticity–strain ratio(characterizing the formability)of the pre-aged alloy with a high strength is up to 0.708.Results reveal the evolution and influence mechanisms of multiscale second-phase particles and the corresponding high formability mechanism of the alloys.The developed coupling control process exhibits considerable potential,revealing remarkable improvements in the room temperature formability of high-strength Al–Zn–Mg–Cu alloys.展开更多
The effects of Sb and Sr on the modification and refinement of Mg17Al12 and Mg2Si phases in Mg- 12Al-0.7Si alloy were investigated and compared. The microstructure and mechanical properties of Mg-12Al0.7Si alloy and i...The effects of Sb and Sr on the modification and refinement of Mg17Al12 and Mg2Si phases in Mg- 12Al-0.7Si alloy were investigated and compared. The microstructure and mechanical properties of Mg-12Al0.7Si alloy and its modification mechanism by Sb and Sr were investigated using a scanning electron microscope （SEM）, an energy dispersive spectrometer （EDS）, X-ray diffraction （XRD） and differential thermal analysis （DTA）. The results indicate that by adding 0.5wt.% Sb to the Mg-12Al-0.7Si alloy, the Mg17Al12 phase was refined and broken into some discontinuous island structures. However, some network Mg17Al12 phases still can be detected in Mg-12Al-0.7Si-0.09Sr alloy. Therefore, Sb performs better in modification and refinement of Mg17Al12 phase than does Sr. Small amounts of fine polygonal shaped Mg2Si phases were found in Mg-12AI-0.7Si-0.5Sb alloy, while the morphology of Mg2Si phases in Mg-12Al-0.7Si-0.09Sr alloy changed from the coarse Chinese script shapes to fine granule and irregular polygonal shapes, indicating that the effects of modification and refinement on Mg2Si phase are more significant by adding 0.09wt.% Sr than 0.5wt.% Sb. The ultimate tensile strengths of the Sb and Sr modified Mg-12Al-0.7Si alloys were considerably increased both at room temperature and at 200 ℃.展开更多
The Mg-Al-Zn-Y-Ce system is one of the key systems for designing high-strength Mg alloys. The purpose of the present article is to develop a thermodynamic database for the Mg-Al-Zn-Y-Ce multicomponent system to design...The Mg-Al-Zn-Y-Ce system is one of the key systems for designing high-strength Mg alloys. The purpose of the present article is to develop a thermodynamic database for the Mg-Al-Zn-Y-Ce multicomponent system to design Mg alloys using the calculation of phase diagrams （CALPHAD） method, where the Gibbs energies of solution phases such as liquid, fcc, bcc, and hcp phases were described by the subregular solution model, whereas those of all the compounds were described by the sublattice model. The thermodynamic parameters describing Gibbs energies of the different phases in this database were evaluated by fitting the experimental data for phase equilibria and thermodynamic properties. On the basis of this database, a lot of information concerning stable and metastable phase equilibria of isothermal and vertical sections, molar fractions of constituent phases, the liquidus projection, etc., can be predicted. This database is expected to play an important role in the design of Mg alloys.展开更多
Al-Zn-Mg-Cu alloy is a favorable choice for aerospace applications requiring good combination of strength and toughness, which is greatly influenced by the coarse intermetallic particles. The evolution of intermetalli...Al-Zn-Mg-Cu alloy is a favorable choice for aerospace applications requiring good combination of strength and toughness, which is greatly influenced by the coarse intermetallic particles. The evolution of intermetallic particles in an Al-Zn-Mg-Cu alloy during heat treatment was studied by field emission gun scanning electron microscopy (FEG-SEM) and X-ray diffractometry(XRD). The results show that there are lamellar eutectic structure (α(Al)+Mg(Zn,Al,Cu)2) and Al7Cu2Fe particles in the solidified structure. The Al7Cu2Fe particles are embedded in the eutectic structure. The content of eutectic structure decreases with the increase of holding time and disappears after 24 h. The size and morphology of Al7Cu2Fe particles exhibit no change during the heat treatment. It is found that the Al2CuMg phase is formed during the treatment at 460℃. A transformation process from the primary eutectic phase Mg(Zn,Al,Cu)2 to Al2CuMg is observed, and the transformation mechanism and kinetics are analyzed. The Al2CuMg constituents form in the primary Mg(Zn,Al,Cu)2 phase, and grow along the eutectic microstructure.展开更多
The influences of Cr on dispersed phase and properties of Al-Zn-Mg-Cu-Zr alloys were investigated by mechanical testing, slow strain rate stress corrosion, intergranular corrosion, combined with optical microscope, sc...The influences of Cr on dispersed phase and properties of Al-Zn-Mg-Cu-Zr alloys were investigated by mechanical testing, slow strain rate stress corrosion, intergranular corrosion, combined with optical microscope, scanning electronic microscope, transmission electronic microscopy (OM, SEM, TEM). Research shows that: with the increase of element Cr, the recrystallization and grain growth had been inhibited, the strength, toughness and corrosion resistance of the alloy increased first and then decreased;when added 0.1 wt% Cr element, the properties of the alloy are the best. The main reasons of that were as below: when added 0.1 wt% Cr element, (Al,Cr)3(Zr,Yb) appeared, that cohered with the matrix. When added 0.18 wt% Cr element, (Al,Cr)3(Zr,Yb) and Al18Mg3Cr2 had been found, making adverse effects on alloys. This work studied the effect of Cr content on recrystallization and grain growth in order to get a new super high strength aluminum alloy.展开更多
基金supported by the National Key Research and Development Program of China(No.2021YFE0115900)the National Natural Science Foundation of China(Nos.52371016,51871029,and 51571023)the Opening Project of State Key Laboratory for Advanced Metals and Materials(Nos.2020-ZD02 and No.2022-Z03).
文摘This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy with high strength and formability.With the increase of Zn content,forming the coupling distribution of multiscale precipitates and iron-rich phases with a reasonable matching ratio and dispersion distribution characteristics is easy.This phenomenon induces the formation of cell-like structures with alternate distribu-tion of coarse and fine grains,and the average plasticity–strain ratio(characterizing the formability)of the pre-aged alloy with a high strength is up to 0.708.Results reveal the evolution and influence mechanisms of multiscale second-phase particles and the corresponding high formability mechanism of the alloys.The developed coupling control process exhibits considerable potential,revealing remarkable improvements in the room temperature formability of high-strength Al–Zn–Mg–Cu alloys.
基金financially supported by the National Natural Science Foundation of China(Grant nos.:51301118,51404166)the Projects of International Cooperation in Shanxi province,China(Grant no.:2014081002)and the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi province,China(Grant nos.:2013108,2014120)
文摘The effects of Sb and Sr on the modification and refinement of Mg17Al12 and Mg2Si phases in Mg- 12Al-0.7Si alloy were investigated and compared. The microstructure and mechanical properties of Mg-12Al0.7Si alloy and its modification mechanism by Sb and Sr were investigated using a scanning electron microscope （SEM）, an energy dispersive spectrometer （EDS）, X-ray diffraction （XRD） and differential thermal analysis （DTA）. The results indicate that by adding 0.5wt.% Sb to the Mg-12Al-0.7Si alloy, the Mg17Al12 phase was refined and broken into some discontinuous island structures. However, some network Mg17Al12 phases still can be detected in Mg-12Al-0.7Si-0.09Sr alloy. Therefore, Sb performs better in modification and refinement of Mg17Al12 phase than does Sr. Small amounts of fine polygonal shaped Mg2Si phases were found in Mg-12AI-0.7Si-0.5Sb alloy, while the morphology of Mg2Si phases in Mg-12Al-0.7Si-0.09Sr alloy changed from the coarse Chinese script shapes to fine granule and irregular polygonal shapes, indicating that the effects of modification and refinement on Mg2Si phase are more significant by adding 0.09wt.% Sr than 0.5wt.% Sb. The ultimate tensile strengths of the Sb and Sr modified Mg-12Al-0.7Si alloys were considerably increased both at room temperature and at 200 ℃.
基金This study was financially supported by the National Natural Science Foundation of China and Chongqing Science and Technology Commission.
文摘The Mg-Al-Zn-Y-Ce system is one of the key systems for designing high-strength Mg alloys. The purpose of the present article is to develop a thermodynamic database for the Mg-Al-Zn-Y-Ce multicomponent system to design Mg alloys using the calculation of phase diagrams （CALPHAD） method, where the Gibbs energies of solution phases such as liquid, fcc, bcc, and hcp phases were described by the subregular solution model, whereas those of all the compounds were described by the sublattice model. The thermodynamic parameters describing Gibbs energies of the different phases in this database were evaluated by fitting the experimental data for phase equilibria and thermodynamic properties. On the basis of this database, a lot of information concerning stable and metastable phase equilibria of isothermal and vertical sections, molar fractions of constituent phases, the liquidus projection, etc., can be predicted. This database is expected to play an important role in the design of Mg alloys.
基金Project(2004AA5BG018) supported by the Science and Technology Development Fund of Harbin, China
文摘Al-Zn-Mg-Cu alloy is a favorable choice for aerospace applications requiring good combination of strength and toughness, which is greatly influenced by the coarse intermetallic particles. The evolution of intermetallic particles in an Al-Zn-Mg-Cu alloy during heat treatment was studied by field emission gun scanning electron microscopy (FEG-SEM) and X-ray diffractometry(XRD). The results show that there are lamellar eutectic structure (α(Al)+Mg(Zn,Al,Cu)2) and Al7Cu2Fe particles in the solidified structure. The Al7Cu2Fe particles are embedded in the eutectic structure. The content of eutectic structure decreases with the increase of holding time and disappears after 24 h. The size and morphology of Al7Cu2Fe particles exhibit no change during the heat treatment. It is found that the Al2CuMg phase is formed during the treatment at 460℃. A transformation process from the primary eutectic phase Mg(Zn,Al,Cu)2 to Al2CuMg is observed, and the transformation mechanism and kinetics are analyzed. The Al2CuMg constituents form in the primary Mg(Zn,Al,Cu)2 phase, and grow along the eutectic microstructure.
文摘The influences of Cr on dispersed phase and properties of Al-Zn-Mg-Cu-Zr alloys were investigated by mechanical testing, slow strain rate stress corrosion, intergranular corrosion, combined with optical microscope, scanning electronic microscope, transmission electronic microscopy (OM, SEM, TEM). Research shows that: with the increase of element Cr, the recrystallization and grain growth had been inhibited, the strength, toughness and corrosion resistance of the alloy increased first and then decreased;when added 0.1 wt% Cr element, the properties of the alloy are the best. The main reasons of that were as below: when added 0.1 wt% Cr element, (Al,Cr)3(Zr,Yb) appeared, that cohered with the matrix. When added 0.18 wt% Cr element, (Al,Cr)3(Zr,Yb) and Al18Mg3Cr2 had been found, making adverse effects on alloys. This work studied the effect of Cr content on recrystallization and grain growth in order to get a new super high strength aluminum alloy.
