Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to ...Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to study its effect on the oxidation resistance, apparent porosity, bulk density, elastic modulus, and modulus of rupture. It is found that Al_(4)SiC_(4) can be synthesized by microwave sintering at 1 300 ℃ and the addition of Al_(4)SiC_(4)-containing material as an antioxidant can enhance the oxidation resistance of the magnesia carbon refractory brick.展开更多
In order to investigate the effect of the catalyst loading mode on the mechanical properties of Si_(3)N_(4) composite MgO-C refractories prepared by nitridation,fused magnesia,flake graphite,silicon powder,and phenoli...In order to investigate the effect of the catalyst loading mode on the mechanical properties of Si_(3)N_(4) composite MgO-C refractories prepared by nitridation,fused magnesia,flake graphite,silicon powder,and phenolic resin were used as the main raw materials,and ferric nitrate as the catalyst to prepare refractories by nitriding at 1350℃.The effects of different catalyst supports(silicon powder,silicon powder+phenolic resin)on the formation of Si_(3)N_(4) in MgO-C refractories and the properties of refractories were studied.The results show that the silicon powder+resin catalyst support promotes the participation ofα-Si_(3)N_(4) in the reaction to generateβ-Si_(3)N_(4) and MgSiN_(2),and generates more SiC.However,this loading mode causes more gas to escape from the refractories and loosens the material structure,which reduces the mechanical properties.On the contrary,MgO-C refractories prepared by nitridation with silicon powder-supported catalysts under the same conditions show higher density and better mechanical properties.展开更多
Wetting phenomena between MgO C and CaO SiO2 slags were investigated by varying carbon content.A sessile drop technique was adopted to study the wetting phenomena in conjunction with a high speed camera for the observ...Wetting phenomena between MgO C and CaO SiO2 slags were investigated by varying carbon content.A sessile drop technique was adopted to study the wetting phenomena in conjunction with a high speed camera for the observation of intrinsic wetting phenomena.The results show that the high content of SiO2 and the presence of Al2O3 in slags enhance the diffusion of Mg2+,leading to the promotion of reactive wetting.The carbon in MgO C refractory impedes the penetration of slags by repelling the slag and slowing the diffusion of Mg2+.This accounts for the non-wetting behavior of the slag on MgO C refractory with 17% (mass fraction) carbon similar to that of graphite.展开更多
An investigation on the oxidation mechanism of the graphite in the MgO-C refractory materials is helpful to improving both the quality of these materials and to preventing and/or lowering of the adverse effects of the...An investigation on the oxidation mechanism of the graphite in the MgO-C refractory materials is helpful to improving both the quality of these materials and to preventing and/or lowering of the adverse effects of the high-temperature oxidation. In this research, the oxidation behavior of the MgO-C refractories containing 5~20 wt% graphite was studied via weight-loss method. Atmospheric air was used for oxidation at temperatures ranging from 900℃ to 1300°C and the experimental data were compared with those obtained from the dimensionless kinetic equations of the shrinking core model, in order to determine the oxidation mechanisms of the refractories. The best fit was achieved with the porous layer diffusion control regime. Oxidation mechanism tends, however, to slightly deviate from pure pore diffusion control to pore diffusion-external gas transfer regime in the samples having more graphite contents (e.g. 20%).展开更多
Two types of low carbon MgO - C refractories with 6% graphite were prepared using microporous magnesiarich spinel (5 - 3 and 3 - 1 mm ) and fused magnesia (5 - 3 and 3 - 1 mm ) as coarse aggregates, respectively, ...Two types of low carbon MgO - C refractories with 6% graphite were prepared using microporous magnesiarich spinel (5 - 3 and 3 - 1 mm ) and fused magnesia (5 - 3 and 3 - 1 mm ) as coarse aggregates, respectively, fused magnesia ( ≤1 mm) as fine aggregate, magnesia powder (≤ 0. 088 mm ) , flake graphite powder ( ≤0. 088 mm), metal Al powder ( 〈0. 074 mm) as matrix, and phenol resin as binder. After curing at 220 ℃ and coke-embedded firing at 1 500 ℃ , the apparent porosity, cold crushing strength, cold modulus of rupture, permanent linear change on heating, thermal shock resistance and slag resistance of the specimens were studied comparatively. The results indicate that: ( 1 ) after curing at 220 ℃ and coke-embedded firing at 1 500 ℃, the specimen with microporous magnesia-rich spinel replacing fused magnesia has lower bulk density and higher apparent porosity than the common low car- bon MgO - C specimen. After curing at 220 ℃, the specimen with microporous aggregate has lower strength than common low carbon MgO - C specimen, but after coke-embedded firing at 1 500℃, it has higher strength and lower permanent linear change on heating; (2) low carbon MgO - C specimen using microporous magnesia-rich spinel to replace fused magnesia aggregate has better thermal shock resistance but worse slag resistance.展开更多
In order to tackle the shortcomings of high brittleness,hard graphitization,and poor oxidation resistance resulted from carbonization of phenolic resin of Mg O- C refractories, effects of 2 mass% spherical Ni, and2 ma...In order to tackle the shortcomings of high brittleness,hard graphitization,and poor oxidation resistance resulted from carbonization of phenolic resin of Mg O- C refractories, effects of 2 mass% spherical Ni, and2 mass% spherical Ni plus 7. 5 mass% Al composite powder on microstructure of the secondary carbon in Mg O- C refractories matrix were investigated. The results show that a large number of carbon whiskers form after the carbonization of phenolic resin with Ni powder;in the Mg O- C refractories matrix with only Ni powder,the carbon microspheres form at all treatment temperatures and change slightly with the temperature rising;the carbon whiskers begin to generate in the specimens with composite powder at 1 000 ℃,the diameter of the carbon whiskers is about 0. 4- 0. 5 μm,and the length is about 3- 4 μm,and the formed carbon whiskers increase gradually with the temperature rising.展开更多
To solve the problem of poor high-temperature service performance caused by low carbonization of MgO-C refractories,low-carbon MgO–C refractories with excellent thermal shock,oxidation and corrosion resistances were ...To solve the problem of poor high-temperature service performance caused by low carbonization of MgO-C refractories,low-carbon MgO–C refractories with excellent thermal shock,oxidation and corrosion resistances were successfully designed by using SiC whiskers as reinforcing phases and introducing micro-Al_(2)O_(3) powders as additives.The results indicated that the addition of micro-Al_(2)O_(3) powders optimized the internal structure of the material,like the columnar β-Si_(3)N_(4) with a stepped distribution and the mosaic structure formed between granular and flaky Mg_(2)SiO_(4),which synergistically strengthened and toughened the material and gave the material excellent mechanical properties and thermal shock resistance.Specifically,the cold modulus of rupture and cold crushing strength after thermal shock were increased by 4.1 and 20.3 MPa,respectively.Moreover,the addition of micro-Al_(2)O_(3) powders promoted the formation of fine particles of Mg_(2)SiO_(4),MgAl_(2)O_(4) and MgO,as well as a dense protective layer of Mg_(2)SiO_(4) in the material under high-temperature environment.Furthermore,spinel and high-temperature solid solution were formed in the corrosion environment.The oxidation and corrosion resistances were greatly improved by 41%and 15%,respectively.展开更多
The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the...The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the type of melts and temperature have been studied.The mechanisms of refractory corrosion by the used melts and the factors contributing to the inhibition of corrosion development have been investigated by the method of petrographic analysis.On the basis of obtained results,the use of high-alumina,chromic oxide,and AZS/Cr refractories in the sections of glass furnace linings,experiencing the intensive impact of aluminaboronsilicate glasses and basalt melts,has been confirmed and scientifically substantiated.展开更多
Organizedby The Chinese Society for Metals The Chinese Ceramic Society Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.Sponsored by Refractories Committee of The Chinese Society for Metals Sinosteel Luona...Organizedby The Chinese Society for Metals The Chinese Ceramic Society Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.Sponsored by Refractories Committee of The Chinese Society for Metals Sinosteel Luonai Materials Technology Corporation Co-Sponsoredby State Key Laboratory of Advanced Refractories The State Key Laboratory of Refractories and Metallurgy Refractories Press Indian Refractory Makers Association The Federation for International Refractory Research and Education.展开更多
MgO-C refractories with stainless steel fibers were prepared to investigate the effects of stainless steel fibers addition on the thermal shock resistance,oxidation resistance,and microstructure of MgO-C refractories,...MgO-C refractories with stainless steel fibers were prepared to investigate the effects of stainless steel fibers addition on the thermal shock resistance,oxidation resistance,and microstructure of MgO-C refractories,and the optimum amount of stainless steel fibers was determined.The results showed that adding stainless steel fiber in MgO-C refractories can increase flexural strength and thermal shock resistance,with an optimal addition of 2 wt.%,owing to the bridging effect and crack deflection toughening of stainless steel fibers inside the material.The formation of MgAl1.9Fe0.1O4 composite spinel,which was responsible for higher oxidation resistance,produced volume expansion and prevented the diffusion of oxygen.The strengthening mechanism is physical embedding at room temperature,while it is reaction bonding at high temperature.展开更多
To address the issues of reduced performance and shortened lifespan during the low-carbonizating process of Al_(2)O_(3)-C refractories,nano-crystalline ZrC modified graphite was prepared using Zr powder and flake grap...To address the issues of reduced performance and shortened lifespan during the low-carbonizating process of Al_(2)O_(3)-C refractories,nano-crystalline ZrC modified graphite was prepared using Zr powder and flake graphite as raw materials,with NaCl and NaF mixed salt serving as the medium.The flake graphite was gradually replaced by ZrC modified graphite in the preparation of Al_(2)O_(3)-C refractories,and its impact on the material’s structure and properties was investigated.The results indicate that,compared to samples with only flake graphite,the introduction of 1 mass%to 5 mass%nano-crystalline ZrC modified graphite can significantly enhance the mechanical performance of low-carbon Al_(2)O_(3)-C refractories.When 5 mass%ZrC modified graphite is added,the mechanical properties of the samples are optimal,with the cold modulus of rupture and elastic modulus reaching 22.5 MPa and 65.0 GPa,respectively.展开更多
To optimize their Al_(2)O_(3)-SiO_(2) raw materials,anorthite based insulation refractories were prepared by the in-situ sintering process combined with the foaming method after sintering at 1350℃for 3 h,using green ...To optimize their Al_(2)O_(3)-SiO_(2) raw materials,anorthite based insulation refractories were prepared by the in-situ sintering process combined with the foaming method after sintering at 1350℃for 3 h,using green and pollution-free kaolin,kyanite,andalusite and sillimanite as Al_(2)O_(3)-SiO_(2) raw materials,respectively,and industrial CaCO_(3) as the CaO source.Effects of Al_(2)O_(3)-SiO_(2) raw material types on the physical properties,phase composition and microstructure were investigated.The results are as follows.All samples prepared by different Al_(2)O_(3)-SiO_(2) raw materials have hexagonal flake anorthite and a small amount of mullite and corundum.Their bulk density and thermal conductivity decrease in the order of using kaolin,andalusite,kyanite and sillimanite as the Al_(2)O_(3)-SiO_(2) raw material,but their apparent porosity increases.Moreover,in the sample with kaolin,the bonding between anorthite crystals on the pore walls is closer than that of the other samples,which is conducive to increasing the cold crushing strength.The bonding between anorthite crystals on pore walls gradually decreases in the order of using kyanite,andalusite and sillimanite as the Al_(2)O_(3)-SiO_(2) raw material,thus their cold crushing strength decreases accordingly.In comprehensive consideration,the properties of the sample from kyanite are the optimal.Its apparent porosity,thermal conductivity and cold crushing strength are 84.6%,0.141 W·m^(-1)·K^(-1) and 1.89 MPa,respectively.展开更多
Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and micro...Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and microstructure was investigated. Low-carbon MgO-C refractories were prepared by using the synthesized Al2O3-SiC composite as additive. The effect of its addition on the slag penetration and corrosion resistance as well as oxidation resistance of the refractories was investigated, and the slag resistance and oxidation resistance mechanisms of the Al2O3-SiC composite were also discussed. The results show that the synthesis temperature has a great influence on preparation of Al2O3-SiC composite. The Al2O3-SiC composite can be synthesized at 1873-1973 K under argon atmosphere, with pyrophyllite and natural graphite as raw materials, and particle sizes of the composite synthesized at 1973 K are mainly distributed as 1-2 μm. The slag penetration and corrosion resistance of low-carbon M80-C refractories can be remarkably improved by adding the synthesized Al2O3-SiC composite, and the oxidation resistance has an improvement to some extent. The increase of slag viscosity and the formation of MgAl2O4 can effectively inhibit the slag penetration and corrosion for the refractories.展开更多
Magnesiu-Calcia materials containing 22 -53 wt% CaO hare been investigated Jot refinery slag corrosion and penetration resistance by Scanning Electron Microscopy ( SEM) .nd XRD. The corrosion and penetration resista...Magnesiu-Calcia materials containing 22 -53 wt% CaO hare been investigated Jot refinery slag corrosion and penetration resistance by Scanning Electron Microscopy ( SEM) .nd XRD. The corrosion and penetration resistance of MgO-CaO materials is enhanced with the increase of CaO content in specimens. It can be explained that, with increase of CaO content, the specimens reacted will+ slag form higher melting point minerals of C3S ant C2S, creating a dense surface layer, which stopped others from penetrating further. Thus , the corrosion and penetration resistame was improved. No matter what kinds of slag were chosen, the depth of penetration decreased will+ increase of CaO con,tent.展开更多
Carbon nanotubes (CNTs) have been extensively studied over the last two decades since they possess excellent properties.CNTs have been considered as new promising reinforcements for carbon containing refractories (...Carbon nanotubes (CNTs) have been extensively studied over the last two decades since they possess excellent properties.CNTs have been considered as new promising reinforcements for carbon containing refractories (CCRs).Current research progress of the CNT-reinforced MgO-C and Al2O3-C refractories was summarized in this mini-review,and the CNT-reinforced CCRs possess remarkable mechanical properties and superior thermal shock resistance compared to CCRs without CNTs.展开更多
Preparation of lightweight insulation materials from forsterite and fly ash cenesphere/Xie Zhe,Deng Chengji,Dong Bo,Ding Jun,Zhu Hongxi,Zhou Nian,Yu Chao//Naihuo Callao-202256(5);:369 Abstract:In order to reduce the r...Preparation of lightweight insulation materials from forsterite and fly ash cenesphere/Xie Zhe,Deng Chengji,Dong Bo,Ding Jun,Zhu Hongxi,Zhou Nian,Yu Chao//Naihuo Callao-202256(5);:369 Abstract:In order to reduce the raw material cost and the sintering temperature,lightweight insulation materials were fabricated using forsterite and fly ash cenesphere as main raw materials,and borax as the texturizer,heat treating at 800。C for 1 h.The influence of the borax addition(5%,10%,20%and 30%,by mass)on the phase.composition,the microstructure,and the properties of the materials was studied.展开更多
Research progress on hydration resistance of magnesia-calcia refractories/Huang Ren,Li Kezhuo,Xie Houbo,Gao Ruihong,Huang Zhong,Zhang Haijun,Zhang Shaowei//Naihuo Cailiao.-2022,56(4):277Abstract:Magnesia-calcia refrac...Research progress on hydration resistance of magnesia-calcia refractories/Huang Ren,Li Kezhuo,Xie Houbo,Gao Ruihong,Huang Zhong,Zhang Haijun,Zhang Shaowei//Naihuo Cailiao.-2022,56(4):277Abstract:Magnesia-calcia refractories are widely used in the iron and steel smelting industry because of their advantages of steel liquid purification,high refractoriness,good thermal shock resistance and high corrosion resistance in basic slag.However,MgO and CaO usually hydrate in the process of manufacturing.展开更多
Corrosion resistance and penetration resistance of MgO-CaO materials with different CaO contents (22%, 42%, 49%, 53%, in mass)to refining AOD slag or VOD slag were investigated using static crucible technique by vis...Corrosion resistance and penetration resistance of MgO-CaO materials with different CaO contents (22%, 42%, 49%, 53%, in mass)to refining AOD slag or VOD slag were investigated using static crucible technique by visual observation, SEM and XRD. The corrosion resistance and penetration resistance of speci-mens decrease with the increase of CaO content. This may be caused by the formation of C3S and C2S during the reactions between specimens and the slag. The formed C3S and C2S can restrain the further penetration to the matrix. The higher the CaO content, the more the C2S or C3S formed, the lower the porosity of the speci-mens, and the lower the penetration depth and corrosion rate. The corrosion resistance to AOD slag is better than that to VOD slag, because the reaction between AOD slag and the matrix is slighter than that between VOD slag and the matrix.展开更多
The demand for low-carbon MgO–C refractories is ever growing to meet the development of advanced steelmaking technologies and efficient energy conservation.Meanwhile,to improve the oxidation resistance and inhibit th...The demand for low-carbon MgO–C refractories is ever growing to meet the development of advanced steelmaking technologies and efficient energy conservation.Meanwhile,to improve the oxidation resistance and inhibit the weakness of low-carbon MgO–C refractories,antioxidants are necessary.The application of ternary carbides that focused on improving the oxidation performance of MgO–C refractories has been explored,and the ternary carbides including Al_(4)O_(4)C,Al8B_(4)C_(7),Al_(4)SiC_(4),Ti_(2)AlC,Ti_(3)AlC_(2),and Ti_(3)SiC_(2)have been proved effective.The crystal structure,physical properties,oxidation behavior,and synthesis of these ternary carbides were summarized,and their oxidation mechanism in assisting antioxidation of MgO–C refractories was discussed.In addition,the potential aspects related to the usage and development of ternary carbides in low-carbon MgO–C refractories were proposed.展开更多
基金This work was funded by Luoyang Major Science and Technology Innovation Project(2301009A)Henan Province Key Research and Development Project(231111230200)。
文摘Al_(4)SiC_(4) was synthesized from Al powder, silicon carbide, and graphite by microwave sintering, and characterized by XRD and SEM. Then the synthesized material was added to the magnesia carbon refractory brick to study its effect on the oxidation resistance, apparent porosity, bulk density, elastic modulus, and modulus of rupture. It is found that Al_(4)SiC_(4) can be synthesized by microwave sintering at 1 300 ℃ and the addition of Al_(4)SiC_(4)-containing material as an antioxidant can enhance the oxidation resistance of the magnesia carbon refractory brick.
基金supported by the National Natural Science Foundation of China(U20A20239)the Natural Science Foundation of Hubei Province(2020CFB692)the Scientific Research Fund of Hunan Provincial Education Department(18A428).
文摘In order to investigate the effect of the catalyst loading mode on the mechanical properties of Si_(3)N_(4) composite MgO-C refractories prepared by nitridation,fused magnesia,flake graphite,silicon powder,and phenolic resin were used as the main raw materials,and ferric nitrate as the catalyst to prepare refractories by nitriding at 1350℃.The effects of different catalyst supports(silicon powder,silicon powder+phenolic resin)on the formation of Si_(3)N_(4) in MgO-C refractories and the properties of refractories were studied.The results show that the silicon powder+resin catalyst support promotes the participation ofα-Si_(3)N_(4) in the reaction to generateβ-Si_(3)N_(4) and MgSiN_(2),and generates more SiC.However,this loading mode causes more gas to escape from the refractories and loosens the material structure,which reduces the mechanical properties.On the contrary,MgO-C refractories prepared by nitridation with silicon powder-supported catalysts under the same conditions show higher density and better mechanical properties.
基金supported by the R&D Center for Valuable Recycling(Global-Top Environmental Technology Development Program)funded by the Ministry of Environment(Project No.:11-C22-ID)
文摘Wetting phenomena between MgO C and CaO SiO2 slags were investigated by varying carbon content.A sessile drop technique was adopted to study the wetting phenomena in conjunction with a high speed camera for the observation of intrinsic wetting phenomena.The results show that the high content of SiO2 and the presence of Al2O3 in slags enhance the diffusion of Mg2+,leading to the promotion of reactive wetting.The carbon in MgO C refractory impedes the penetration of slags by repelling the slag and slowing the diffusion of Mg2+.This accounts for the non-wetting behavior of the slag on MgO C refractory with 17% (mass fraction) carbon similar to that of graphite.
文摘An investigation on the oxidation mechanism of the graphite in the MgO-C refractory materials is helpful to improving both the quality of these materials and to preventing and/or lowering of the adverse effects of the high-temperature oxidation. In this research, the oxidation behavior of the MgO-C refractories containing 5~20 wt% graphite was studied via weight-loss method. Atmospheric air was used for oxidation at temperatures ranging from 900℃ to 1300°C and the experimental data were compared with those obtained from the dimensionless kinetic equations of the shrinking core model, in order to determine the oxidation mechanisms of the refractories. The best fit was achieved with the porous layer diffusion control regime. Oxidation mechanism tends, however, to slightly deviate from pure pore diffusion control to pore diffusion-external gas transfer regime in the samples having more graphite contents (e.g. 20%).
文摘Two types of low carbon MgO - C refractories with 6% graphite were prepared using microporous magnesiarich spinel (5 - 3 and 3 - 1 mm ) and fused magnesia (5 - 3 and 3 - 1 mm ) as coarse aggregates, respectively, fused magnesia ( ≤1 mm) as fine aggregate, magnesia powder (≤ 0. 088 mm ) , flake graphite powder ( ≤0. 088 mm), metal Al powder ( 〈0. 074 mm) as matrix, and phenol resin as binder. After curing at 220 ℃ and coke-embedded firing at 1 500 ℃ , the apparent porosity, cold crushing strength, cold modulus of rupture, permanent linear change on heating, thermal shock resistance and slag resistance of the specimens were studied comparatively. The results indicate that: ( 1 ) after curing at 220 ℃ and coke-embedded firing at 1 500 ℃, the specimen with microporous magnesia-rich spinel replacing fused magnesia has lower bulk density and higher apparent porosity than the common low car- bon MgO - C specimen. After curing at 220 ℃, the specimen with microporous aggregate has lower strength than common low carbon MgO - C specimen, but after coke-embedded firing at 1 500℃, it has higher strength and lower permanent linear change on heating; (2) low carbon MgO - C specimen using microporous magnesia-rich spinel to replace fused magnesia aggregate has better thermal shock resistance but worse slag resistance.
文摘In order to tackle the shortcomings of high brittleness,hard graphitization,and poor oxidation resistance resulted from carbonization of phenolic resin of Mg O- C refractories, effects of 2 mass% spherical Ni, and2 mass% spherical Ni plus 7. 5 mass% Al composite powder on microstructure of the secondary carbon in Mg O- C refractories matrix were investigated. The results show that a large number of carbon whiskers form after the carbonization of phenolic resin with Ni powder;in the Mg O- C refractories matrix with only Ni powder,the carbon microspheres form at all treatment temperatures and change slightly with the temperature rising;the carbon whiskers begin to generate in the specimens with composite powder at 1 000 ℃,the diameter of the carbon whiskers is about 0. 4- 0. 5 μm,and the length is about 3- 4 μm,and the formed carbon whiskers increase gradually with the temperature rising.
基金the Scientific Research Fund of Hunan Provincial Education Department(22B0856)the Hengyang"Xiaohe"Science and Technology Talent Special Project([2023]45)+3 种基金the Guidance Plan Project of Hengyang City([2023]40)the National Natural Science Foundation of China(U20A20239)the College Students'Innovation and Entrepreneurship Training Project(S202311528055)the Characteristic Application Discipline of Material Science Engineering in Hunan Province([2022]351).
文摘To solve the problem of poor high-temperature service performance caused by low carbonization of MgO-C refractories,low-carbon MgO–C refractories with excellent thermal shock,oxidation and corrosion resistances were successfully designed by using SiC whiskers as reinforcing phases and introducing micro-Al_(2)O_(3) powders as additives.The results indicated that the addition of micro-Al_(2)O_(3) powders optimized the internal structure of the material,like the columnar β-Si_(3)N_(4) with a stepped distribution and the mosaic structure formed between granular and flaky Mg_(2)SiO_(4),which synergistically strengthened and toughened the material and gave the material excellent mechanical properties and thermal shock resistance.Specifically,the cold modulus of rupture and cold crushing strength after thermal shock were increased by 4.1 and 20.3 MPa,respectively.Moreover,the addition of micro-Al_(2)O_(3) powders promoted the formation of fine particles of Mg_(2)SiO_(4),MgAl_(2)O_(4) and MgO,as well as a dense protective layer of Mg_(2)SiO_(4) in the material under high-temperature environment.Furthermore,spinel and high-temperature solid solution were formed in the corrosion environment.The oxidation and corrosion resistances were greatly improved by 41%and 15%,respectively.
文摘The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the type of melts and temperature have been studied.The mechanisms of refractory corrosion by the used melts and the factors contributing to the inhibition of corrosion development have been investigated by the method of petrographic analysis.On the basis of obtained results,the use of high-alumina,chromic oxide,and AZS/Cr refractories in the sections of glass furnace linings,experiencing the intensive impact of aluminaboronsilicate glasses and basalt melts,has been confirmed and scientifically substantiated.
文摘Organizedby The Chinese Society for Metals The Chinese Ceramic Society Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.Sponsored by Refractories Committee of The Chinese Society for Metals Sinosteel Luonai Materials Technology Corporation Co-Sponsoredby State Key Laboratory of Advanced Refractories The State Key Laboratory of Refractories and Metallurgy Refractories Press Indian Refractory Makers Association The Federation for International Refractory Research and Education.
基金supported by the Scientific and Technological Research Project of the Henan Provincial Department of Science and Technology of China(No.212102210579).
文摘MgO-C refractories with stainless steel fibers were prepared to investigate the effects of stainless steel fibers addition on the thermal shock resistance,oxidation resistance,and microstructure of MgO-C refractories,and the optimum amount of stainless steel fibers was determined.The results showed that adding stainless steel fiber in MgO-C refractories can increase flexural strength and thermal shock resistance,with an optimal addition of 2 wt.%,owing to the bridging effect and crack deflection toughening of stainless steel fibers inside the material.The formation of MgAl1.9Fe0.1O4 composite spinel,which was responsible for higher oxidation resistance,produced volume expansion and prevented the diffusion of oxygen.The strengthening mechanism is physical embedding at room temperature,while it is reaction bonding at high temperature.
文摘To address the issues of reduced performance and shortened lifespan during the low-carbonizating process of Al_(2)O_(3)-C refractories,nano-crystalline ZrC modified graphite was prepared using Zr powder and flake graphite as raw materials,with NaCl and NaF mixed salt serving as the medium.The flake graphite was gradually replaced by ZrC modified graphite in the preparation of Al_(2)O_(3)-C refractories,and its impact on the material’s structure and properties was investigated.The results indicate that,compared to samples with only flake graphite,the introduction of 1 mass%to 5 mass%nano-crystalline ZrC modified graphite can significantly enhance the mechanical performance of low-carbon Al_(2)O_(3)-C refractories.When 5 mass%ZrC modified graphite is added,the mechanical properties of the samples are optimal,with the cold modulus of rupture and elastic modulus reaching 22.5 MPa and 65.0 GPa,respectively.
基金This work was supported by the National Natural Science Foundation of China(5180021223)Henan Provice Science&Technology Programs(232102231046 and 232102231051)Cultivation Programme for Yong Backbone Teachers in Henan University to Technology(2142121).
文摘To optimize their Al_(2)O_(3)-SiO_(2) raw materials,anorthite based insulation refractories were prepared by the in-situ sintering process combined with the foaming method after sintering at 1350℃for 3 h,using green and pollution-free kaolin,kyanite,andalusite and sillimanite as Al_(2)O_(3)-SiO_(2) raw materials,respectively,and industrial CaCO_(3) as the CaO source.Effects of Al_(2)O_(3)-SiO_(2) raw material types on the physical properties,phase composition and microstructure were investigated.The results are as follows.All samples prepared by different Al_(2)O_(3)-SiO_(2) raw materials have hexagonal flake anorthite and a small amount of mullite and corundum.Their bulk density and thermal conductivity decrease in the order of using kaolin,andalusite,kyanite and sillimanite as the Al_(2)O_(3)-SiO_(2) raw material,but their apparent porosity increases.Moreover,in the sample with kaolin,the bonding between anorthite crystals on the pore walls is closer than that of the other samples,which is conducive to increasing the cold crushing strength.The bonding between anorthite crystals on pore walls gradually decreases in the order of using kyanite,andalusite and sillimanite as the Al_(2)O_(3)-SiO_(2) raw material,thus their cold crushing strength decreases accordingly.In comprehensive consideration,the properties of the sample from kyanite are the optimal.Its apparent porosity,thermal conductivity and cold crushing strength are 84.6%,0.141 W·m^(-1)·K^(-1) and 1.89 MPa,respectively.
基金supported by the National Science and Technology Major Special Project (No.2009ZX04006-032)the National Natural Science Foundation of China (No.50274021) and Baoshan Iron and SteelCo.,Ltd.,China
文摘Al2O3-SiC composite was synthesized with pyrophyllite and natural graphite as raw materials by carbothermal reduction reaction under argon atmosphere. The effect of synthesis temperature on phase composition and microstructure was investigated. Low-carbon MgO-C refractories were prepared by using the synthesized Al2O3-SiC composite as additive. The effect of its addition on the slag penetration and corrosion resistance as well as oxidation resistance of the refractories was investigated, and the slag resistance and oxidation resistance mechanisms of the Al2O3-SiC composite were also discussed. The results show that the synthesis temperature has a great influence on preparation of Al2O3-SiC composite. The Al2O3-SiC composite can be synthesized at 1873-1973 K under argon atmosphere, with pyrophyllite and natural graphite as raw materials, and particle sizes of the composite synthesized at 1973 K are mainly distributed as 1-2 μm. The slag penetration and corrosion resistance of low-carbon M80-C refractories can be remarkably improved by adding the synthesized Al2O3-SiC composite, and the oxidation resistance has an improvement to some extent. The increase of slag viscosity and the formation of MgAl2O4 can effectively inhibit the slag penetration and corrosion for the refractories.
文摘Magnesiu-Calcia materials containing 22 -53 wt% CaO hare been investigated Jot refinery slag corrosion and penetration resistance by Scanning Electron Microscopy ( SEM) .nd XRD. The corrosion and penetration resistance of MgO-CaO materials is enhanced with the increase of CaO content in specimens. It can be explained that, with increase of CaO content, the specimens reacted will+ slag form higher melting point minerals of C3S ant C2S, creating a dense surface layer, which stopped others from penetrating further. Thus , the corrosion and penetration resistame was improved. No matter what kinds of slag were chosen, the depth of penetration decreased will+ increase of CaO con,tent.
基金financially supported by the National Natural Science Foundation of China ( General program,51272188, 51472184 and 51472185 )the Natural Science Foundation of Hubei Province,China ( Contract No. 2013CFA086 )Foreign Cooperation Projects in Science and Technology of Hubei Province,China ( Contract No. 2013BHE002)
文摘Carbon nanotubes (CNTs) have been extensively studied over the last two decades since they possess excellent properties.CNTs have been considered as new promising reinforcements for carbon containing refractories (CCRs).Current research progress of the CNT-reinforced MgO-C and Al2O3-C refractories was summarized in this mini-review,and the CNT-reinforced CCRs possess remarkable mechanical properties and superior thermal shock resistance compared to CCRs without CNTs.
文摘Preparation of lightweight insulation materials from forsterite and fly ash cenesphere/Xie Zhe,Deng Chengji,Dong Bo,Ding Jun,Zhu Hongxi,Zhou Nian,Yu Chao//Naihuo Callao-202256(5);:369 Abstract:In order to reduce the raw material cost and the sintering temperature,lightweight insulation materials were fabricated using forsterite and fly ash cenesphere as main raw materials,and borax as the texturizer,heat treating at 800。C for 1 h.The influence of the borax addition(5%,10%,20%and 30%,by mass)on the phase.composition,the microstructure,and the properties of the materials was studied.
文摘Research progress on hydration resistance of magnesia-calcia refractories/Huang Ren,Li Kezhuo,Xie Houbo,Gao Ruihong,Huang Zhong,Zhang Haijun,Zhang Shaowei//Naihuo Cailiao.-2022,56(4):277Abstract:Magnesia-calcia refractories are widely used in the iron and steel smelting industry because of their advantages of steel liquid purification,high refractoriness,good thermal shock resistance and high corrosion resistance in basic slag.However,MgO and CaO usually hydrate in the process of manufacturing.
文摘Corrosion resistance and penetration resistance of MgO-CaO materials with different CaO contents (22%, 42%, 49%, 53%, in mass)to refining AOD slag or VOD slag were investigated using static crucible technique by visual observation, SEM and XRD. The corrosion resistance and penetration resistance of speci-mens decrease with the increase of CaO content. This may be caused by the formation of C3S and C2S during the reactions between specimens and the slag. The formed C3S and C2S can restrain the further penetration to the matrix. The higher the CaO content, the more the C2S or C3S formed, the lower the porosity of the speci-mens, and the lower the penetration depth and corrosion rate. The corrosion resistance to AOD slag is better than that to VOD slag, because the reaction between AOD slag and the matrix is slighter than that between VOD slag and the matrix.
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(U20A20239)Natural Science Foundation of Hubei Province(2020CFB692).
文摘The demand for low-carbon MgO–C refractories is ever growing to meet the development of advanced steelmaking technologies and efficient energy conservation.Meanwhile,to improve the oxidation resistance and inhibit the weakness of low-carbon MgO–C refractories,antioxidants are necessary.The application of ternary carbides that focused on improving the oxidation performance of MgO–C refractories has been explored,and the ternary carbides including Al_(4)O_(4)C,Al8B_(4)C_(7),Al_(4)SiC_(4),Ti_(2)AlC,Ti_(3)AlC_(2),and Ti_(3)SiC_(2)have been proved effective.The crystal structure,physical properties,oxidation behavior,and synthesis of these ternary carbides were summarized,and their oxidation mechanism in assisting antioxidation of MgO–C refractories was discussed.In addition,the potential aspects related to the usage and development of ternary carbides in low-carbon MgO–C refractories were proposed.