In order to isolate meiotic chromosomes of Populus species meiotic chromosome preparation techniques of pollen mother cells for laser micro-dissection were studied. Pollen mother cells at diakinesis ofPopulus canadens...In order to isolate meiotic chromosomes of Populus species meiotic chromosome preparation techniques of pollen mother cells for laser micro-dissection were studied. Pollen mother cells at diakinesis ofPopulus canadensis Moench were used as samples. Two methods were used to prepare meiotic chromosomes： in the first, cell suspensions were dropped on polyethylene-naphthalate or polyester membrane slides which had just been incubated at -20~C; in the second method, cell suspensions were also dropped on polyethylene-naphthalate or polyester membrane slides, but spread with the aid of high temperatures. The cells did not completely spread by the first method and chromosomes at diakinesis could not be individually distinguished. In contrast, well-spread diakinesis chromosomes were obtained by the second method, where chromosomes, connected with their nucleolus, were successfully isolated with the laser micro-dissection system. As well, we discuss the prospect of applications of laser micro-dissection in cytogeneties and molecular genetics in Populus species.展开更多
AIM: To study the effect of an innovative micro-dissection procedure by radiofrequency ablation (MRA) in removing eyelid nevus.METHODS: Fifty-six consecutive outpatients with eyelid nevus were treated with MRA using a...AIM: To study the effect of an innovative micro-dissection procedure by radiofrequency ablation (MRA) in removing eyelid nevus.METHODS: Fifty-six consecutive outpatients with eyelid nevus were treated with MRA using a monopolar device. The effect of MRA was determined after following-up for 6mo to 5y.RESULTS: Fifty-two cases (52 eyes, 92.9%) were cured once, and 4 cases (4 eyes, 7.1%) received second treatment for small residual. All cases healed well after surgery, with no pigmentation, no scars, no loss of eyelashes, no deformation of eyelid margin. There was no visual impairment after healing.CONCLUSION: MRA of eyelid nevus using the XL-RFA device is highly efficient without significant complications.展开更多
AIM: To assess the therapeutic value of endoscopic mucosal resection (EMR) under micro-probe ultrasound guidance for rectal carcinoids less than 1 cm in diameter. METHODS: Twenty-one patients pathologically diagnosed ...AIM: To assess the therapeutic value of endoscopic mucosal resection (EMR) under micro-probe ultrasound guidance for rectal carcinoids less than 1 cm in diameter. METHODS: Twenty-one patients pathologically diagnosed with rectal carcinoids following colonoscopy in our hospital from January 2007 to November 2012 were included in this study. The patients consisted of 14 men and 7 women, with a mean age of 52.3 ± 12.2 years (range: 36-72 years). The patients with submucosal tumors less than 1 cm in diameter arising from the rectal and muscularis mucosa detected by micro-probe ultrasound were treated with EMR and followed up with conventional endoscopy and micro-probe ultrasound. RESULTS: All of the 21 tumors were confirmed by micro-probe ultrasound as uniform hypoechoic masses originating from the rectal and muscularis mucosa, without invasion of muscularis propria and vessels, and less than 1 cm in diameter. EMR was successfully completed without bleeding, perforation or other complications. The resected specimens were immunohistochemically confirmed to be carcinoids. Patients were followed up for one to two years, and no tumor recurrence was reported. CONCLUSION: EMR is a safe and effective treatment for rectal carcinoids less than 1 cm in diameter.展开更多
Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and effic...Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.展开更多
To satisfy the measuring demands for the micro components of the industry, micro/nano probing systems with various ball tips have been developed. However, most of them cannot be used to measure the real micro geometri...To satisfy the measuring demands for the micro components of the industry, micro/nano probing systems with various ball tips have been developed. However, most of them cannot be used to measure the real micro geometrical features high precisely because the parameters of the ball tips are not appropriate. The ball tips with a diameter of less than 100 μm, a sphericity and eccentricity of far less than 1 μm are required urgently. A review on the state-of-the-art of ball tips of micro/nano probing systems is presented. The material characteristics and geometric parameters of now available ball tips are introduced sepa- rately. The existing fabrication methods for the ball tips are demonstrated and summarized. The ball tips＇ future trends, which are smaller diameter, better sphericity and smaller eccentricity, are proposed in view of the practical requirements of high-precision measurement for micro geometrical features. Some challenges have to be faced in future, such as the promotion and high-precision measurement for the small ball tip＇s sphericity and eccentricity. Fusion method without the gravity effect when the molten ball tip solidifying is a more suitable way to fabricate a small diameter ball tip together with a shaft.展开更多
基金supported by the State Forestry Administration of China (2002-66)
文摘In order to isolate meiotic chromosomes of Populus species meiotic chromosome preparation techniques of pollen mother cells for laser micro-dissection were studied. Pollen mother cells at diakinesis ofPopulus canadensis Moench were used as samples. Two methods were used to prepare meiotic chromosomes： in the first, cell suspensions were dropped on polyethylene-naphthalate or polyester membrane slides which had just been incubated at -20~C; in the second method, cell suspensions were also dropped on polyethylene-naphthalate or polyester membrane slides, but spread with the aid of high temperatures. The cells did not completely spread by the first method and chromosomes at diakinesis could not be individually distinguished. In contrast, well-spread diakinesis chromosomes were obtained by the second method, where chromosomes, connected with their nucleolus, were successfully isolated with the laser micro-dissection system. As well, we discuss the prospect of applications of laser micro-dissection in cytogeneties and molecular genetics in Populus species.
基金Supported by Health Department of GeneralLogistics(No.413F261N)
文摘AIM: To study the effect of an innovative micro-dissection procedure by radiofrequency ablation (MRA) in removing eyelid nevus.METHODS: Fifty-six consecutive outpatients with eyelid nevus were treated with MRA using a monopolar device. The effect of MRA was determined after following-up for 6mo to 5y.RESULTS: Fifty-two cases (52 eyes, 92.9%) were cured once, and 4 cases (4 eyes, 7.1%) received second treatment for small residual. All cases healed well after surgery, with no pigmentation, no scars, no loss of eyelashes, no deformation of eyelid margin. There was no visual impairment after healing.CONCLUSION: MRA of eyelid nevus using the XL-RFA device is highly efficient without significant complications.
文摘AIM: To assess the therapeutic value of endoscopic mucosal resection (EMR) under micro-probe ultrasound guidance for rectal carcinoids less than 1 cm in diameter. METHODS: Twenty-one patients pathologically diagnosed with rectal carcinoids following colonoscopy in our hospital from January 2007 to November 2012 were included in this study. The patients consisted of 14 men and 7 women, with a mean age of 52.3 ± 12.2 years (range: 36-72 years). The patients with submucosal tumors less than 1 cm in diameter arising from the rectal and muscularis mucosa detected by micro-probe ultrasound were treated with EMR and followed up with conventional endoscopy and micro-probe ultrasound. RESULTS: All of the 21 tumors were confirmed by micro-probe ultrasound as uniform hypoechoic masses originating from the rectal and muscularis mucosa, without invasion of muscularis propria and vessels, and less than 1 cm in diameter. EMR was successfully completed without bleeding, perforation or other complications. The resected specimens were immunohistochemically confirmed to be carcinoids. Patients were followed up for one to two years, and no tumor recurrence was reported. CONCLUSION: EMR is a safe and effective treatment for rectal carcinoids less than 1 cm in diameter.
基金Supported by National Natural Science Foundation of China(Grant Nos.51305322,51405364,51475348)
文摘Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.
基金Supported by National Natural Science Foundation of China(Grant Nos.51675157,51475131)State Key Laboratory of Precision Measuring Technology and Instruments of China(Grant No.PIL1401)
文摘To satisfy the measuring demands for the micro components of the industry, micro/nano probing systems with various ball tips have been developed. However, most of them cannot be used to measure the real micro geometrical features high precisely because the parameters of the ball tips are not appropriate. The ball tips with a diameter of less than 100 μm, a sphericity and eccentricity of far less than 1 μm are required urgently. A review on the state-of-the-art of ball tips of micro/nano probing systems is presented. The material characteristics and geometric parameters of now available ball tips are introduced sepa- rately. The existing fabrication methods for the ball tips are demonstrated and summarized. The ball tips＇ future trends, which are smaller diameter, better sphericity and smaller eccentricity, are proposed in view of the practical requirements of high-precision measurement for micro geometrical features. Some challenges have to be faced in future, such as the promotion and high-precision measurement for the small ball tip＇s sphericity and eccentricity. Fusion method without the gravity effect when the molten ball tip solidifying is a more suitable way to fabricate a small diameter ball tip together with a shaft.
