We herein report our studies into the effects of microwave irradiation on the solvent-free esterification of L-leucine with alcohols. In the absence of solvent, microwave irradiation accelerated the reaction compared ...We herein report our studies into the effects of microwave irradiation on the solvent-free esterification of L-leucine with alcohols. In the absence of solvent, microwave irradiation accelerated the reaction compared to conventional oil bath heating. Measurement of the dielectric properties under the reaction conditions revealed that the high dielectric loss factor of the reaction mixture containing L-leucine, n-butanol, and a p-toluene sulfonic acid catalyst could be attributed to the acceleration of the reaction. The depth of microwave penetration into the reaction mixture as derived from the in-situ measurement of the dielectric properties was ~13 mm, which suggested that a thinner reaction vessel was favorable for the esterification of L-leucine. In addition to the batch reaction using a desktop microwave reactor, two types of flow reaction were also performed using a desktop tubular reactor and a semi-bench-scale tubular reactor. These flow reactions also exhibited high performances, thus allowing the scale-up of this reaction system for industrial use.展开更多
Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia load...Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia loadings from different magnesium precursors and hydrochloric acid molar concentrations. The Mg O–SBA-15 supports and Pd–Pb/Mg O–SBA-15 catalysts were characterized by several analysis methods. The results revealed that the addition of Mg O improved the ordered structure of SBA-15 supports and provided surface alkalinity of SBA-15 supports. The average size of the Pd3 Pb particles on magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts was smaller than that on the pure silica-based Pd–Pb/SBA-15 catalysts. The experiments on catalyst performance showed that the magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts had higher activity than pure silica-based Pd–Pb/SBA-15 catalysts, showing the strong dependence of catalytic activity on the average size of active particles. The difference of activity between Pd–Pb/SBA-15 catalysts and Pd–Pb/Mg O–SBA-15 catalysts was due to the discrepant structural properties and surface alkalinity provided by Mg O, which led to the different Pd3 Pb particle sizes and then resulted in the different number of active sites. Besides magnesia loadings, other factors, such as hydrochloric acid molar concentration and magnesium precursors, had considerable influences on the catalytic activity.展开更多
Supported palladium catalysts, which were used in the oxidative esterification of methacrolein to methyl methacrylate, have been prepared with different carriers and Pd precursors. Experimental results revealed that P...Supported palladium catalysts, which were used in the oxidative esterification of methacrolein to methyl methacrylate, have been prepared with different carriers and Pd precursors. Experimental results revealed that Pd catalysts with r-Al2O3 support and Na2PdC14 precursor showed good performance. Pd catalyst modified with Pb and Mg indicated that Pd-Mg bimetallic catalyst exhibited considerably higher activity and Pd-Pb exhibited both higher activity and selectivity. 92.27% methacrolein conversion and 90.57% methyl methacrylate selectivity were obtained on Pd-Pb-Mg catalyst.展开更多
A series of supported intermetallic Pb-Pb catalysts were prepared with the impregnation method by changing the support(silica,molecular sieve or γ-alumina)and the pore size.The chemical states of the two metals were ...A series of supported intermetallic Pb-Pb catalysts were prepared with the impregnation method by changing the support(silica,molecular sieve or γ-alumina)and the pore size.The chemical states of the two metals were characterized by XPS analysis,the process for producing methyl methacrylate based on the direct oxidative esterification of methacrolein with methanol in the presence of oxygen was performed in a slurry reactor with the above-mentioned catalysts.The influence of the calcination temperature and the kinds of support as well as the pore size on catalytic activity had been extensively investigated.Under the conditions of temperature at 80℃,catalyst 3.8%(ω)and the reaction time 2 h,the conversion rate of methacrolein reached 85%,the selectivity and the yield of methyl methacrylate were 90% and 76.5%,respectively.展开更多
The kinetics of esterification of 2-keto-L-gulonic acid with methanol in the liquid phase catalyzed by cation exchange resin, D001, was studied. The experiments were carried out in a stirred batch reactor at 318, 323,...The kinetics of esterification of 2-keto-L-gulonic acid with methanol in the liquid phase catalyzed by cation exchange resin, D001, was studied. The experiments were carried out in a stirred batch reactor at 318, 323, 328, 333, 338, 341 K under atmospheric pressure. It is found that the speed of rotating rate has no effect on the esterification rate in the range of 300-500 r/min and the effect of internal mass transfer resistance is not obvious. The effects of temperature and catalyst loading on the reaction rate were researched under the condition of eliminating the effect of diffusion. The rate was found to increase with the increase of the temperature and catalyst loading. The experimental data were correlated with a kinetic model based on the pseudo-homogeneous catalysis. The kinetic equation for describing the reaction catalyzed by cation exchange resin was developed. The experimental data are in good agreement with the model.展开更多
The oxidative esterification of methacrolein(MAL)is an important way to prepare high-valued methyl methacrylate(MMA),but this process is ultra-complex due to the high reactivity of both C=O and C=C bonds in MAL molecu...The oxidative esterification of methacrolein(MAL)is an important way to prepare high-valued methyl methacrylate(MMA),but this process is ultra-complex due to the high reactivity of both C=O and C=C bonds in MAL molecule.In order to further improve MMA selectivity,the reaction network and relevant mechanisms have been proposed and profoundly investigated in this paper.Five kinds of fundamental reactions are involved in this process,including(a)the acetal reaction;(b)the aerobic oxidation of hemiacetal;(c)the alkoxylation of C=C double bond;(d)the Diels-Alder reaction;and(e)the hydrogenation reaction of unsaturated double bond.Among them,the Diels-Alder reaction of MAL is non-catalyzed,and the Brönsted acid sites or the Lewis acid sites favor promoting acetal reaction of MAL with methanol,while the alkoxylation of C=C bond with methanol is enhanced under alkaline condition.In particular,by employing the Pd-based catalysts,hydrogenation products are formed in alkaline methanol solution,hence with lower than those obtained by the Au-based catalysts.Notably,it is necessary to match the hemiacetal fromation and aerobic oxidation of hemiacetal,which is relevant with the amount and strength of acid and redox sites.Consequently,this work can provide a good guidance for the further design of both catalysts and processes in future.展开更多
The kinetic behavior of esterification between methacrylic acid and methanol catalyzed by NKC-9 resin was studied in a fixed bed reactor.The reaction was conducted in the temperature range of 323.15 to 368.15 K with t...The kinetic behavior of esterification between methacrylic acid and methanol catalyzed by NKC-9 resin was studied in a fixed bed reactor.The reaction was conducted in the temperature range of 323.15 to 368.15 K with the molar ratio of reactants from 0.8 to 1.4 under certain pressure.The measurement data were regression with the pseudo-homogeneous(P-H),Eley-Rideal(E-R),and Langmuir-Hinshelwood(L-H)heterogeneous kinetic models.Independent adsorption experiments were implemented to gain the adsorption equilibrium constants of four components.Among the above three models,the L-H model exhibited the best fitting results.The stability of NKC-9 was evaluated by long-term running with the yield of methyl methacrylate no decrease during 3000 h operation.The structure and physicochemical properties of the new and used catalyst were performed by several characterizations including thermogravimetric analysis(TG),scanning electron microscope(SEM),X-ray diffraction(XRD)and Fourier transform infrared spectroscopy(FT-IR)and so on.展开更多
A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid ...A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification in order to obtain a completely soluble product. The synthesis process was traced through by LR. Compared with the model compounds, the presumed structure of this comblike polymer has been proved to be valid by C-13 NMR The comb polymer is a white rubbery solid. It can be dissolved in butanone and THF, and manifests good film forming ability.展开更多
文摘We herein report our studies into the effects of microwave irradiation on the solvent-free esterification of L-leucine with alcohols. In the absence of solvent, microwave irradiation accelerated the reaction compared to conventional oil bath heating. Measurement of the dielectric properties under the reaction conditions revealed that the high dielectric loss factor of the reaction mixture containing L-leucine, n-butanol, and a p-toluene sulfonic acid catalyst could be attributed to the acceleration of the reaction. The depth of microwave penetration into the reaction mixture as derived from the in-situ measurement of the dielectric properties was ~13 mm, which suggested that a thinner reaction vessel was favorable for the esterification of L-leucine. In addition to the batch reaction using a desktop microwave reactor, two types of flow reaction were also performed using a desktop tubular reactor and a semi-bench-scale tubular reactor. These flow reactions also exhibited high performances, thus allowing the scale-up of this reaction system for industrial use.
基金Supported by the Key Program of the National Natural Science Foundation of China(21036007)the National High-Tech Project of China(2012AA062903)
文摘Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia loadings from different magnesium precursors and hydrochloric acid molar concentrations. The Mg O–SBA-15 supports and Pd–Pb/Mg O–SBA-15 catalysts were characterized by several analysis methods. The results revealed that the addition of Mg O improved the ordered structure of SBA-15 supports and provided surface alkalinity of SBA-15 supports. The average size of the Pd3 Pb particles on magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts was smaller than that on the pure silica-based Pd–Pb/SBA-15 catalysts. The experiments on catalyst performance showed that the magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts had higher activity than pure silica-based Pd–Pb/SBA-15 catalysts, showing the strong dependence of catalytic activity on the average size of active particles. The difference of activity between Pd–Pb/SBA-15 catalysts and Pd–Pb/Mg O–SBA-15 catalysts was due to the discrepant structural properties and surface alkalinity provided by Mg O, which led to the different Pd3 Pb particle sizes and then resulted in the different number of active sites. Besides magnesia loadings, other factors, such as hydrochloric acid molar concentration and magnesium precursors, had considerable influences on the catalytic activity.
基金Financial supported by the National Natural Science Foundation of China （No.20436050）Foundation of Graduate University of the Chinese Academy of Sciences.
文摘Supported palladium catalysts, which were used in the oxidative esterification of methacrolein to methyl methacrylate, have been prepared with different carriers and Pd precursors. Experimental results revealed that Pd catalysts with r-Al2O3 support and Na2PdC14 precursor showed good performance. Pd catalyst modified with Pb and Mg indicated that Pd-Mg bimetallic catalyst exhibited considerably higher activity and Pd-Pb exhibited both higher activity and selectivity. 92.27% methacrolein conversion and 90.57% methyl methacrylate selectivity were obtained on Pd-Pb-Mg catalyst.
基金Supported by the National Natural Science Foundation of China(No.20436050)and the National High Technology Development Program of China(No.2004AA649240).
文摘A series of supported intermetallic Pb-Pb catalysts were prepared with the impregnation method by changing the support(silica,molecular sieve or γ-alumina)and the pore size.The chemical states of the two metals were characterized by XPS analysis,the process for producing methyl methacrylate based on the direct oxidative esterification of methacrolein with methanol in the presence of oxygen was performed in a slurry reactor with the above-mentioned catalysts.The influence of the calcination temperature and the kinds of support as well as the pore size on catalytic activity had been extensively investigated.Under the conditions of temperature at 80℃,catalyst 3.8%(ω)and the reaction time 2 h,the conversion rate of methacrolein reached 85%,the selectivity and the yield of methyl methacrylate were 90% and 76.5%,respectively.
文摘The kinetics of esterification of 2-keto-L-gulonic acid with methanol in the liquid phase catalyzed by cation exchange resin, D001, was studied. The experiments were carried out in a stirred batch reactor at 318, 323, 328, 333, 338, 341 K under atmospheric pressure. It is found that the speed of rotating rate has no effect on the esterification rate in the range of 300-500 r/min and the effect of internal mass transfer resistance is not obvious. The effects of temperature and catalyst loading on the reaction rate were researched under the condition of eliminating the effect of diffusion. The rate was found to increase with the increase of the temperature and catalyst loading. The experimental data were correlated with a kinetic model based on the pseudo-homogeneous catalysis. The kinetic equation for describing the reaction catalyzed by cation exchange resin was developed. The experimental data are in good agreement with the model.
基金The authors acknowledge supports from the National Key Basic Research Development Plan“973”Project(2006CB202508)the SINOPEC Project(411058,413025)the National Natural Science Foundation(21808244).
文摘The oxidative esterification of methacrolein(MAL)is an important way to prepare high-valued methyl methacrylate(MMA),but this process is ultra-complex due to the high reactivity of both C=O and C=C bonds in MAL molecule.In order to further improve MMA selectivity,the reaction network and relevant mechanisms have been proposed and profoundly investigated in this paper.Five kinds of fundamental reactions are involved in this process,including(a)the acetal reaction;(b)the aerobic oxidation of hemiacetal;(c)the alkoxylation of C=C double bond;(d)the Diels-Alder reaction;and(e)the hydrogenation reaction of unsaturated double bond.Among them,the Diels-Alder reaction of MAL is non-catalyzed,and the Brönsted acid sites or the Lewis acid sites favor promoting acetal reaction of MAL with methanol,while the alkoxylation of C=C bond with methanol is enhanced under alkaline condition.In particular,by employing the Pd-based catalysts,hydrogenation products are formed in alkaline methanol solution,hence with lower than those obtained by the Au-based catalysts.Notably,it is necessary to match the hemiacetal fromation and aerobic oxidation of hemiacetal,which is relevant with the amount and strength of acid and redox sites.Consequently,this work can provide a good guidance for the further design of both catalysts and processes in future.
基金the National Natural Science Fund for Distinguished Young Scholars(22025803)supported by the National Natural Science Foundation of China(22178338)+1 种基金the Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(YLU-DNL Fund 2021018)the financial support of project“Research and development and industrial application of new catalytic materials for green synthesis of MMA to replace highly toxic HCN”(Hebei,20374002D)。
文摘The kinetic behavior of esterification between methacrylic acid and methanol catalyzed by NKC-9 resin was studied in a fixed bed reactor.The reaction was conducted in the temperature range of 323.15 to 368.15 K with the molar ratio of reactants from 0.8 to 1.4 under certain pressure.The measurement data were regression with the pseudo-homogeneous(P-H),Eley-Rideal(E-R),and Langmuir-Hinshelwood(L-H)heterogeneous kinetic models.Independent adsorption experiments were implemented to gain the adsorption equilibrium constants of four components.Among the above three models,the L-H model exhibited the best fitting results.The stability of NKC-9 was evaluated by long-term running with the yield of methyl methacrylate no decrease during 3000 h operation.The structure and physicochemical properties of the new and used catalyst were performed by several characterizations including thermogravimetric analysis(TG),scanning electron microscope(SEM),X-ray diffraction(XRD)and Fourier transform infrared spectroscopy(FT-IR)and so on.
文摘A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification in order to obtain a completely soluble product. The synthesis process was traced through by LR. Compared with the model compounds, the presumed structure of this comblike polymer has been proved to be valid by C-13 NMR The comb polymer is a white rubbery solid. It can be dissolved in butanone and THF, and manifests good film forming ability.
