A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip'...A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.展开更多
The way of producing needle-shaped wolldstonite pow-der has never been released, the key to the matter is to get high enough length to -width ratio of the particle. With φ 50 mm horizontal disk type jet mill,rue carr...The way of producing needle-shaped wolldstonite pow-der has never been released, the key to the matter is to get high enough length to -width ratio of the particle. With φ 50 mm horizontal disk type jet mill,rue carry out a series of experiments, and discover that select-ing reasonable technological operating condition, with the aim of weak-ening colliding pulverizing effect and reinforcing rubbing pulverizing effect, is helpful to improve effectively the L-W radio.展开更多
A high-aspect-ratio microchannel heat exchanger based on multi-tool milling process was developed. Several slotting cutters were stacked together for simultaneously machining several high-aspect-ratio microchannels wi...A high-aspect-ratio microchannel heat exchanger based on multi-tool milling process was developed. Several slotting cutters were stacked together for simultaneously machining several high-aspect-ratio microchannels with manifold structures. On the basis of multi-tool milling process, the structural design of the manifold side height, microchannel length, width, number, and interval were analyzed. The heat transfer performances of high-aspect-ratio microchannel heat exchangers with two different manifolds were investigated by experiments, and the influencing factors were analyzed. The results indicate that the magnitude of heat transfer area per unit volume dominates the heat transfer performances of plate-type micro heat exchanger, while the velocity distribution between microchannels has little effects on the heat transfer performances.展开更多
Vertical rigidity of the space self adaptive 530 high rigidity mill is calculated by applying the boundary element method (BEM) of three dimension elastic contact problem,which can update the existed deforming s...Vertical rigidity of the space self adaptive 530 high rigidity mill is calculated by applying the boundary element method (BEM) of three dimension elastic contact problem,which can update the existed deforming separation calculating theory and corresponding methods of material mechanics,elastic mechanics and finite element method.The method has less hypotheses and stronger synthesis in contact type calculating model.The advantages of the method are high calculating rate,high calculating accuracy,etc..展开更多
Fuel cell using borohydride as the fuel has received much attention. AB5-type hydrogen storage alloy used as the anodic material instead of noble metals has been investigated. In order to restrain the generation of hy...Fuel cell using borohydride as the fuel has received much attention. AB5-type hydrogen storage alloy used as the anodic material instead of noble metals has been investigated. In order to restrain the generation of hydrogen and enhance the utilization of borohydride, Ti/Zr metal powders has been added into the parent LmNi4.78Mn0.22 （where Lm is La-richened mischmetal） alloy （LNM） by ball milling and heat treatment methods. It is found that the addition of Ti/Zr metal powders lowers the electrochemical catalytic activity of the electrodes, at the same time, restrains the generation of hydrogen and enhances the utilization of the fuel. All the results show that the hydrogen generation rate or the utilization of the fuel is directly relative to the electrochemical catalytic activity or the discharge capability of the electrodes. The utilization of the fuel increases with discharge current density. It is very important to find a balance between the discharge capability and the utilization of the fuel.展开更多
Many new types of rolling mills have been studied and developed corresponding to the needs of improvement in productivity and quality.This presentation reflects back at some of the innovative technologies,which were d...Many new types of rolling mills have been studied and developed corresponding to the needs of improvement in productivity and quality.This presentation reflects back at some of the innovative technologies,which were developed by Mitsubishi-Hitachi Metals Machinery,Inc.(hereinafter referred to as M-H),including the evolution of the pair cross mill,mill stabilizing device,on-line roll profiler,shape meter for hot-rolling,endless hot-rolling, recent application of UCM,and M-H split housing type 20-high mill.展开更多
基金Project (50374058) supported by the National Natural Science Foundation of China and Shanghai Baosteel Group Co.
文摘A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.
文摘The way of producing needle-shaped wolldstonite pow-der has never been released, the key to the matter is to get high enough length to -width ratio of the particle. With φ 50 mm horizontal disk type jet mill,rue carry out a series of experiments, and discover that select-ing reasonable technological operating condition, with the aim of weak-ening colliding pulverizing effect and reinforcing rubbing pulverizing effect, is helpful to improve effectively the L-W radio.
基金Projects(50675070 50805052) supported by the National Nature Science Foundation of China+1 种基金Projects(07118064 8451064101000320) supported by the Natural Science Foundation of Guangdong Province
文摘A high-aspect-ratio microchannel heat exchanger based on multi-tool milling process was developed. Several slotting cutters were stacked together for simultaneously machining several high-aspect-ratio microchannels with manifold structures. On the basis of multi-tool milling process, the structural design of the manifold side height, microchannel length, width, number, and interval were analyzed. The heat transfer performances of high-aspect-ratio microchannel heat exchangers with two different manifolds were investigated by experiments, and the influencing factors were analyzed. The results indicate that the magnitude of heat transfer area per unit volume dominates the heat transfer performances of plate-type micro heat exchanger, while the velocity distribution between microchannels has little effects on the heat transfer performances.
文摘Vertical rigidity of the space self adaptive 530 high rigidity mill is calculated by applying the boundary element method (BEM) of three dimension elastic contact problem,which can update the existed deforming separation calculating theory and corresponding methods of material mechanics,elastic mechanics and finite element method.The method has less hypotheses and stronger synthesis in contact type calculating model.The advantages of the method are high calculating rate,high calculating accuracy,etc..
文摘Fuel cell using borohydride as the fuel has received much attention. AB5-type hydrogen storage alloy used as the anodic material instead of noble metals has been investigated. In order to restrain the generation of hydrogen and enhance the utilization of borohydride, Ti/Zr metal powders has been added into the parent LmNi4.78Mn0.22 （where Lm is La-richened mischmetal） alloy （LNM） by ball milling and heat treatment methods. It is found that the addition of Ti/Zr metal powders lowers the electrochemical catalytic activity of the electrodes, at the same time, restrains the generation of hydrogen and enhances the utilization of the fuel. All the results show that the hydrogen generation rate or the utilization of the fuel is directly relative to the electrochemical catalytic activity or the discharge capability of the electrodes. The utilization of the fuel increases with discharge current density. It is very important to find a balance between the discharge capability and the utilization of the fuel.
文摘Many new types of rolling mills have been studied and developed corresponding to the needs of improvement in productivity and quality.This presentation reflects back at some of the innovative technologies,which were developed by Mitsubishi-Hitachi Metals Machinery,Inc.(hereinafter referred to as M-H),including the evolution of the pair cross mill,mill stabilizing device,on-line roll profiler,shape meter for hot-rolling,endless hot-rolling, recent application of UCM,and M-H split housing type 20-high mill.
