The wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges

In this paper,wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges are investigated using the wave approach.The dynamic responses,active and reactive power flow in the finite plate are calculated by the Mindlin plate theory （MPT） and classic plate theory （CPT）.To satisfy the boundary conditions and continuous conditions at the coupled junction of the finite L-shaped plate,the near-field and far-field waves are entirely contained in the wave approach.The in-plane longitudinal and shear waves are also considered.The results indicate that the vibratory power flow based on the MPT is different from that based on the CPT not only at high frequencies but also at low and medium frequencies.The influence of the plate thickness on the vibrational power flow is investigated.From the results it is seen that the shear and rotary inertia correction of the MPT can influence the active and reactive power at the junction of the L-shaped plate not only at high frequencies but also at low and medium frequencies.Furthermore,the effects of structural damping on the active and reactive power flow at the junction are also analyzed.

Closed form solutions for free vibrations of rectangular Mindlin plates

A new two-eigenfunctions theory, using the amplitude deflection and the generalized curvature as two fundamental eigenfunctions, is proposed for the free vibration solutions of a rectangular Mindlin plate. The three classical eigenvalue differential equations of a Mindlin plate are reformulated to arrive at two new eigenvalue differential equations for the proposed theory. The closed form eigensolutions, which are solved from the two differential equations by means of the method of separation of variables are identical with those via Kirchhoff plate theory for thin plate, and can be employed to predict frequencies for any combinations of simply supported and clamped edge conditions. The free edges can also be dealt with if the other pair of opposite edges are simply supported. Some of the solutions were not available before. The frequency parameters agree closely with the available ones through pb-2 Rayleigh-Ritz method for different aspect ratios and relative thickness of plate.

CHARACTERISTIC EQUATIONS AND CLOSED-FORM SOLUTIONS FOR FREE VIBRATIONS OF RECTANGULAR MINDLIN PLATES

The direct separation of variables is used to obtain the closed-form solutions for the free vibrations of rectangular Mindlin plates. Three different characteristic equations are derived by using three different methods. It is found that the deflection can be expressed by means of the four characteristic roots and the two rotations should be expressed by all the six characteristic roots,which is the particularity of Mindlin plate theory. And the closed-form solutions,which satisfy two of the three governing equations and all boundary conditions and are accurate for rectangular plates with moderate thickness,are derived for any combinations of simply supported and clamped edges. The free edges can also be dealt with if the other pair of opposite edges is simply supported. The present results agree well with results published previously by other methods for different aspect ratios and relative thickness.

A reconstructed edge-based smoothed DSG element based on global coordinates for analysis of Reissner–Mindlin plates

A reconstructed edge-based smoothed triangular element, which is incorporated with the discrete shear gap (DSG) method, is formulated based on the global coordinate for analysis of Reissner-Mindlin plates. A symbolic integration combined with the smoothing technique is implemented to calculate the smoothed finite element matrices, which is integrated along the boundaries of each smoothing cell. Numerical results show that the proposed element is free from shear locking, and its results are in good agreement with the exact solutions, even for very thin plates with extremely distorted elements. The proposed element gives more accurate results than the original DSG element without smoothing, and it can be taken as an alternative element for analysis of Reissner-Mindlin plates. The prominent feature of the present element is that the integration scheme is unified in the smoothed form for all of the finite element matrices.

Multiresolution Finite Element Method Based on a New Locking-Free Rectangular Mindlin Plate Element

A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting displacement subspace sequence whose basis functions are constructed of scaling and shifting on the element domain of basic full node shape function. The basic full node shape function is constructed by extending the split node shape function of a traditional Mindlin plate element to other three quadrants around the coordinate zero point. As a result, a new rational MRA concept together with the resolution level (RL) is constituted for the element. The traditional 4-node rectangular Mindlin plate element and method is a mono-resolution one and also a special case of the proposed element and method. The meshing for the monoresolution plate element model is based on the empiricism while the RL adjusting for the multiresolution is laid on the rigorous mathematical basis. The analysis clarity of a plate structure is actually determined by the RL, not by the mesh. Thus, the accuracy of a plate structural analysis is replaced by the clarity, the irrational MRA by the rational and the mesh model by the RL that is the discretized model by the integrated.

Exact solutions for axisymmetric flexural free vibrations of inhomogeneous circular Mindlin plates with variable thickness

Circular plates with radially varying thickness, stiffness, and density are widely used for the structural optimization in engineering. The axisymmetric flexural free vibration of such plates, governed by coupled differential equations with variable coefficients by use of the Mindlin plate theory, is very difficult to be studied analytically. In this paper, a novel analytical method is proposed to reduce such governing equations for circular plates to a pair of uncoupled and easily solvable differential equations of the Sturm-Liouville type. There are two important parameters in the reduced equations. One describes the radial variations of the translational inertia and fiexural rigidity with the consideration of the effect of Poisson＇s ratio. The other reflects the comprehensive effect of the rotatory inertia and shear deformation. The Heun-type equations, recently well-known in physics, are introduced here to solve the flexural free vibration of circular plates analytically, and two basic differential formulae for the local Heun-type functions are discovered for the first time, which will be of great value in enriching the theory of Heun-type differential equations.

Sympletic eigen-solution for clamped Mindlin plate bending problem

Hamiltonian system for the problem on clamped Mindlin plate bending was established by introducing the dual variables for the generalized displacements in this letter. By separation of variables, the transverse eigen-problem was derived based on the sympletic geometry method. With the solved sympletic eigen-values, the generalized sympletic eigen-solution was derived through eigenfunction expansion. An example of plate with all edges clamped was given. The sympletic solution system was worked out directly from the Hamiltonian system. It breaks the limitation of traditional analytic methods which need to select basis functions in advance. The results indicate that the sympletic solution method could find its more extensive applications.

A NEW HYBRID QUADRILATERAL FINITE ELEMENT FOR MINDLIN PLATE

In this paper a new quadrilateral plate element concerning the effect of transverse shear strain has been presented. It is derived from the hybrid finite element model based on the principles of virtual work. The outstanding advantage of this element is to use more rational trial functions of the displacements. For this reason, every variety of plate deformation can be simulated really whilc the least degrees of freedom is employed.A wide range of numerical tests was conducted and the results illustrate that this element has a very wide application scope to the thickness of plates and satisfactory accuracy can be obtained by coarse mesh for all kinds of examples.

TRIANGULAR ELEMENTS FOR REISSNER-MINDLIN PLATE

A general method to construct locking free Reissner-Mindlin plate elements is presented. According to this method the shear strain is replaced by its proper interpolation polynomial, which corresponds to the Kirchoff conditions at the interpolation points as the thickness of plate tends to zero, so the element is locking free. We construct two triangular elements by this method - a 3-node element and a 6-node element. The numerical results are provided.

Nonconforming stabilized combined finite element method for Reissner-Mindlin plate

Based on combination of two variational principles, a nonconforming stabilized finite element method is presented for the Reissner-Mindlin plates. The method is convergent when the finite element space is energy-compatible. Error estimates are derived. In particular, three finite element spaces are applied in the computation. Numerical results show that the method is insensitive to the mesh distortion and has better performence than the MITC4 and DKQ methods. With properly chosen parameters, high accuracy can be obtained at coarse meshes.

CONTINUOUS FINITE ELEMENT METHODS FOR REISSNER-MINDLIN PLATE PROBLEM

On triangle or quadrilateral meshes, two finite element methods are proposed for solving the Reissner-Mindlin plate problem either by augmenting the Galerkin formulation or modifying the plate-thickness. In these methods, the transverse displacement is approximated by conforming （bi）linear macroelements or （bi）quadratic elements, and the rotation by conforming （bi）linear elements. The shear stress can be locally computed from transverse displacement and rotation. Uniform in plate thickness, optimal error bounds are obtained for the transverse displacement, rotation, and shear stress in their natural norms. Numerical results are presented to illustrate the theoretical results.

Determination of isolation layer thickness for undersea mine based on differential cubature solution to irregular Mindlin plate

The differential cubature solution to the problem of a Mindlin plate lying on the Winkler foundation with two simply supported edges and two clamped edges was derived.Discrete numerical technology and shape functions were used to ensure that the solution is suitable to irregular shaped plates.Then,the mechanical model and the solution were employed to model the protection layer that isolates the mining stopes from sea water in Sanshandao gold mine,which is the first subsea mine of China.Furthermore,thickness optimizations for the protection layers above each stope were conducted based on the maximum principle stress criterion,and the linear relations between the best protection layer thickness and the stope area under different safety factors were regressed to guide the isolation design.The method presented in this work provides a practical way to quickly design the isolation layer thickness in subsea mining.

STABILIZED FINITE ELEMENT METHODS FOR THE REISSNER-MINDLIN PLATE

A new stabilized finite element method which is different from Hughes and Franco’s (1988) is presented for the Reissner-Mindlin plate model. The least square mesh-dependent residual form of the shear constitute equation is added to the Partial Projection scheme to enhance the stability. Using piecewise polynomials of order k≥1 for the rotations, of order k+1 for the displacement and of order k-1 for the shear, the kth order error-estimates are obtained. Besides, our computing scheme can be also applied to some lower order elements. All error-estimates are obtained independent of the plate thickness, and the stability parameter is an arbitrary positive constant.

On Choices of Stress Modes for Lower Order Quadrilateral Reissner-Mindlin Plate Elements

A kind of stabilized mixed/hybrid scheme for Reissner-Mindlin plates is proposed with conforming isoparametric bilinear interpolations of de?ection/rotations. The choice of shear stress modes is discussed. It is shown by numerical experiments that fulfilling an energy orthogonal condition for stress approximations is crucial to avoiding “shear locking”.

Forced Vibration Numerical Analysis of Rectangular Elastic Orthotropic Damped Inclined Mindlin Plate Using Finite Difference Algorithm

Plates vibrate when load moves on them. In this paper, the dynamic response of Mindlin plate analytical model was converted to its numerical form using finite difference algorithm. The numerical model was analysed to ascertain the critical parameters contributing to the deflection of Mindlin plate under a moving load. The examination was more reasonable as in the likelihood of the plate laying on a Pasternak foundation was put into thought. Likewise the impact of damping was not dismissed. The plate considered in this paper was an inclined Mindlin plate, where the impacts of shear deformation and rotatory inertia were considered. The numerical equations were solved with the help of a developed computer program and Matlab. The results were consistent with what we have in the literature. The effects of the Pasternak foundation, damping, angle of inclination, and the moving load to the dynamic response of the elastic plate were exceptionally self-evident.

Mindlin板理论高阶精化杂交应力元及稳定性分析

基于Mindlin板理论,构造了杂交应力四边形8节点单元QA8-R。采用任意阶的Timoshenko梁函数构造了三阶边界位移插值函数,该函数确保单元能通过严格的收敛检验。利用Airy应力函数构造了单元域内应力插值函数,该函数包含21个最优选择的应力项。通过精化元方法构造了组合几何刚度矩阵,建立了屈曲分析的有限元列式。数值算例结果表明:QA8-R单元不仅可以通过C^(0-1)分片检验,保证了单元的严格收敛性,而且在不同边界条件下对中厚板的计算精度较高,更易于工程应用。

NONCONFORMING QUADRILATERAL ROTATED ELEMENT FOR REISSNER-MINDLIN PLATE

In this paper, we extend two rectangular elements for Reissner-Mindlin plate [9] to the quadrilateral case. Optimal H and L error bounds independent of the plate hickness are derived under a mild assumption on the mesh partition.

ANALYSIS AND EXPERIMENT ON TRANSIENT DYNAMIC RESPONSE IN FINITE MINDLIN PLATE

The transient wave propagation in the finite rectangular Mindlin plate is investi- gated by the analytical and experimental methods. The generalized ray method （GRM） which has been successfully applied to study the transient responses of beams, planar trusses, space frames and infinite layered media is extended to investigate the transient wave propagation and early short time transient response in finite Mindlin plate. Combining the wave solution, the shock source and the boundary conditions, the ray groups transmitted in the finite rectangular plate can be determined. Numerical simulations and experiments are performed and compared with each other. The results show that the transient wave propagation and early short time transient responses in the finite plate can be studied using the GRM. The early short time transient acceler- ations are very large for the finite plate subjected to the unit impulse, while the early short time transient displacements are very small. The early short time transient accelerations under the unit impulse are much larger than those under the unit step impulse. The thickness and material characteristics have remarkable effects on the early short time transient responses.

The separable Hamiltonian system and complete biorthogonal expansion method of Mindlin plate bending problems

A separable Hamiltonian system of Mindlin plate bending problems is obtained. Using the equivalence between the differential form and integral form of the separable Hamiltonian system, the biorthogonal relationships of the eigenfunctions are presented. Based on the biorthogonal relationships, a novel complete biorthogonal expansion of the Mindlin plate bending problems with two opposite sides simply supported is proposed through the products of operator matrices. The exact solutions to deflections and bending moments for the Mindlin plate with fully simply supported sides are obtained. A numerical example is illustrated to verify the accuracy and validity of the expansion method.

SCATTERING OF FLEXURAL WAVES AND DYNAMIC STRESS CONCENTRATIONS IN MINDLIN'S THICK PLATES WITH A CUTOUT

Using the complex variable method and conformal mapping,scat- tering of flexural waves and dynamic stress concentrations in Mindlin's thick plates with a cutout have been studied.The general solution of the stress problem of the thick plate satisfying the boundary conditions on the contour of cutouts is obtained. Applying the orthogonal function expansion technique,the dynamic stress problem can be reduced into the solution of a set of infinite algebraic equations.As examples, numerical results for the dynamic stress concentration factor in Mindlin's plates with a circular,elliptic cutout are graphically presented in sequence.