REE Geochemistry and Mineralization Characteristics of the Zudong and Gnanxi Granites, Jiangxi Province

The Zudong and Guanxi granites are original rocks of the ion adsorption-type HREE and LREE deposits in weathering crust of granites. The ΣREE value and LREE/HREE ratio of the Zudong granite are 264 ppm and 0.81-0.24 respectively, and the average Y/ΣREE ratio is 35.8-54.5%. This is mainly due to magmatic crystallization and evolution and deuteric metasomatism (albitization, muscovitization and fluorite-doveritization). These alterations resulted in endogenic mineralizations of yttrium-group REE fluorine carbonates, silicates and arsenates. The Guanxi granite is characterized by LREE enrichment (the average LREE/HREE ratio is 2.43).

Mineralization characteristics of pellets prepared by ultrafine magnetite concentrate:influence on metallurgical property and improving method

The reducing property of pellets prepared by ultrafine magnetite concentrate(UMC)and improving method were revealed.The results show that the reduction degree of UMC pellets is only about 56%compared with that of pellets prepared from ordinary iron ore concentrate with relatively coarse particle size,which is significantly lower than the general reduction degree of about 70%.When the composite binder composed of bentonite and organic binder was added,the reduction degree was significantly increased to 69.66%.The revealed mechanism shows that the reduced pellets with common bentonite have a concentric structure,the oxidation gap between the inner and outer layers is obvious,and the outer dense oxide layer hinders the oxidation and reduction of the inner layer.After adding the composite binder,the organic components significantly improved the internal porosity of the pellets and the aggregation degree of ultrafine iron ore concentrate particles in the granulation process,forming a porous structure.The non-uniform double-layer structure is eliminated,and the increased pores are conducive to the internal diffusion of CO,and finally the reduction degree of pellets is increased to the level equivalent to that of ordinary magnetite pellets.

Geochemical Characteristics and Uranium Mineralization Potential of The Yanshanian Granite in The West of Yunnan Province

1 Introduction The Sanjiang metallogenic belt is one of the important nonferrous metal metallogenic belts in China,the potential resources of copper,lead,zinc,silver,gold and tin are huge(Zhengqian et al.,1993).In the west of Yunnan province has a lot of Yanshanian granite,according to 1:20 million test data,development of granite belt rich in radioactive minerals in the west of Yunnan

REE Characteristics of a New Uranium Mineral from the Xianshi Uranium Deposit, South China

Objective Galuskin et al. （2011） firstly discovered that vorlanite （CaU^6＋/4＋）04 is a rare Ca-rich mineral with a fluorite-type structure, which is isostructural with uraninite （U^4＋O2）. Previous studies of the Xianshi granite-related uranium deposit reported that uraninite and pyrite are the major ore minerals whereas galena, clausthalite （PbSe）, and pyrite are minor phases in the ores. A more detailed petrographic and geochronological study of the uranium minerals from the Xianshi deposit showed that there are three distinct types of uraninite-bearing assemblages which formed at three mineralization episodes （Fig. la; Luo et al., 2015）.

The distribution characteristics of clay minerals in the northern South China Sea

The clay minearals are composed of illite, chlorite, kaolinite, montmorillonite and mixed-layer minerals in the submarine sediments of the northern South China Sea. Three types of clay mineral zone can be recognized on the basis of the distributive regularity of clay minerals, submarine relief, hydrodynamic conditions and depositional characteristics in this region. Apart from the northern mainland source, kaolinites carried from the Philippines volcanic arc in the east and Malaysia in the south are also assumed to be one of the sources of the clay minerals in the deep sea. The increase of chlorites to the abyssal direction in the west of 116° E might be associated with the residual chlorites carried from the ancient Zhujiang River during the glacial period and the conversion of kaolinite into chlorite submarine volcanoes appear to be one of the sources of the increment of montmorillonite and chlorite around the Huangyan Island. From the distribution pattern of clay minerals in the whole area, it is known that the types of clay mineral assemblage in the study area are mainly controlled by climate and rock types of the source are-

Mineral Geochemical Characteristics and Indication Significance of Biotite-Rutile in the Gabbro Intrusions in the Yinmin Iron-Copper District, Yunnan

1 Introduction After the Dongchuan Orogenic movement(Hudsonian Orogeny,ca.1800 Ma±),the tectonic basement layer of the continental crust on the Yangtze massif could have been formed.And then tectonic-magmatic emplacement

Mineral Chemical Characteristics of Gabbro-diorite for Shulouqiu Uranium Deposit in Northern Guangdong, China: Constraint on the Magmatic Source

1 Introduction The uranium deposits related with Indosinian and Yanshanian granite have provided the abundant resource of uranium during the past several decades in China.The deposits are mainly distributing in the Guidong granite

Typomorpic Characteristics of the Major Minerals in the Puziwan Gold Deposit,Datong,Shanxi,China

Utilizing theories of minerageny and prospecting mineralogy, the authors studied the attitude, morphotype and chemical composition of metallic minerals of pyrite, gold, chalcopyrite, galena and sphalerite, non-metallic minerals of quartz, carbonate, dolomite and rutile in the Puziwan gold deposit. The study shows the following results. （1） The mineral assemblage is complex and the species of sulfide are abundant with occurrences of sulfosalt minerals. （2） The composition in the minerals is complex and there rich micro elements, including As, Sb, Bi, Se, Te, Au, Ag, Cu, Pb, Zn, and Cr, Ni, V. The typomorphic characteristics of the association of the elements and their specific value suggest that gold mineralization is associated with shallow magmatic hydrothermal activity, the oreforming fluid is the mixture of abundant rising alkali magmatic water originating from the mantle or the lower crust and the descending acid atmospheric water. （3） Ankerite, Fe-rich sphalerite, granular Ti-rich rutile are widely distributed, which indicate great denudation depths, high mineralization temperature. The deposit is found in the middle and shallow positions of the porphyry series. The deep layers are not favorable for gold mineralization. （4） Copper minerals are rich in the ores and sulfides have high content of copper, suggesting possible porphyry-type Cu （Au） mineralization in deep positions and the surrounding areas.

Potash Mineral Characteristics and Geochemical Studies in the West of Bieletan Section

Qarhan Salt Lake is located in the eastern part of the Qaidam Basin,which is first discovered the large potash deposit in the late 1950s.The Bieletan section is located in the west of Qarhan Salt Lake,where saline sediment

An SIMS Study on the Fingerprint Characteristics of Minerals with Special Reference to Minerals from the Jinningian Granites in the Yunnan Sector of the Xikang-Yunnan Axis

In this paper such minerals as apatite, zircon and biotite from granites were determined and analyzed bysecondary ion mass spectrometry (SIMS) for their isotopic ages, REE composition, trace elements and volatilecomponents with an attempt to shed light on the origin and formation environments of the Jinningian granitesin the Yunnan sector of the Kangdian (Xikang- Yunnan) earth's axis. The results show that the apatites,zircons and biotites of different geneses possess different fingerprint characteristics. Some correlations havebeen found between trace elements and volatile components contained in the minerals from granties.

STUDIES ON THE FROTH CHARACTERISTICS OF COMPOSITE COLLECTORS IN NONMETALLIC MINERAL FLOTATION

The flotation results of a phosphate ore are improved by replacing the conventional collectors of fatty acids with composite collectors. The synergistic effect on the froth characteristics in systems using composite collectors has then been studied, and the concept of 'mixed hemimicellae' has been proposed in the adsorption of composite collectors at the air/solution interfaces.

Preliminary Study of the Characteristics and Genesis of Arsenate Minerals in the Oxidized Zone of the Debao Skarn-Type Cu-Sn Ore Deposit in Guangxi

Through the study of the oxidized zone of the Debao skarn-type Cu-Sn deposit in Guangxi, the authorshave found 14 arsenate minerals, most of which are for the first time reported in China. They are mainly Cuarsenate minerals with subordinate Cu-Pb arsenate minerals and minor Fe-Pb-Ba varieties. Based on their paragenesis these minerals may be divided into the following series: (1) the clinoclasite-olivenite-cornwallite- cornubite- debaoite- copper silicarsenate association, (2) the scorodite- carminite- beudan-tite-bayldonite- duftite association, and (3) the scorodite-Ba-bearing pharmacosiderite- dussertite association. Arsenate minerals are formed generally in the oxidized zone of the sulfide-type deposits which lie in thewarm, humid and rainy torrid-subtropical zone with pH=6-8 and contain large amounts of arsenopyrite andcarbonate rocks.

Mechanical properties of rock materials with related to mineralogical characteristics and grain size through experimental investigation： a comprehensive review

Mechanical properties of rock materials are related to textural characteristics. The relationships between mechanical properties and textural characteristics have been extensively investigated for differently types of rocks through experimental tests. Based on the experimental test data, single- and multiple- variant regression analyses are conducted among mechanical properties and textural characteristics. Textural characteristics of rock materials are influenced by the following factors： mineral composition, size, shape, and spatial distribution of mineral grains, porosity, and inherent microcracks. This study focuses on the first two： mineral composition and grain size. This study comprehensively summarizes the regression equations between mechanical properties and mineral content and the regression equations between mechanical properties and grain size. Further research directions are suggested at the end of this study.

Strength Activity Index of Air Quenched Basic Oxygen Furnace Steel Slag

Air quenched basic oxygen furnace steel slag （BOF-SS） is processed at very high cooling rate, which is expected to have different cementitious properties from conventional slowly cooled BOF-SS. For this purpose, the strength activity indexes of air quenched and slowly cooled BOF-SS are investigated. The results reveal that, under the specific surface area （S） of 490 m^2/kg, the compressive strength activity index reaches 1.24 after 28 days with replacement of 15% air quenched BOF-SS and reaches 1.05 after 28 days with replacement of 20% air quenched BOF-SS and 30%granulated blast furnace slag （GBFS）. The cementitious activity of air quenched BOF-SS is obviously higher than that of slowly cooled BOF-SS, mainly because it contains more C3 S and glassy phases.