Cu-Mn, Cu-Mn-Ce, and Cu-Ce mixed-oxide catalysts were prepared by a citric acid sol-gel method and then characterized by XRD, BET, H_2-TPR and XPS analyses. Their catalytic properties were investigated in the toluene ...Cu-Mn, Cu-Mn-Ce, and Cu-Ce mixed-oxide catalysts were prepared by a citric acid sol-gel method and then characterized by XRD, BET, H_2-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu-Mn-Ce ternary mixed-oxide catalyst with 1：2：4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu-Mn-Ce catalyst, a portion of Cu and Mn species entered into the Ce O2 fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu-Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu-Mn and Cu-Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.展开更多
The metal oxides CuMnCe and CeY washcoats on cordierite were prepared using an impregnation method, and then used as support for the active Pt component to prepare the Pt/CuMnCe and Pt/CeY monolithic catalysts for the...The metal oxides CuMnCe and CeY washcoats on cordierite were prepared using an impregnation method, and then used as support for the active Pt component to prepare the Pt/CuMnCe and Pt/CeY monolithic catalysts for the deep oxidation of VOCs. In comparison with the Pt/CeY, CuMnCe, and CeY monolithic catalysts, the Pt/CuMnCe monolithic catalyst shows an excellent performance for toluene,ethyl acetate,and n-hexane oxidation and the Tis low to 216, 200 and 260 ℃,respectively. The active components Pt/PtO and CuMnCe result in a better synergetic interaction, which promote the catalyst reducibility, increase the oxygen mobility, and enhance the adsorption and activation of organic molecules.展开更多
Hierarchical layer-stacking Mn-Ce composite oxide with mesoporous structure was firstly prepared by a simple precipitation/decomposition procedure with oxalate precursor and the complete catalytic oxidation of VOCs（b...Hierarchical layer-stacking Mn-Ce composite oxide with mesoporous structure was firstly prepared by a simple precipitation/decomposition procedure with oxalate precursor and the complete catalytic oxidation of VOCs（benzene, toluene and ethyl acetate） were examined. The Mn-Ce oxalate precursor was obtained from metal salt and oxalic acid without any additives. The resulting materials were characterized by X-ray diffraction（XRD）, Brunauer-Emmett-Teller（BET）, scanning electron microscopy（SEM）, energy dispersive X-ray spectroscopy（EDX）, hydrogen temperature programmed reduction（H2-TPR） and X-ray photoelectron spectroscopy（XPS）. Compared with Mn-Ce composite oxide synthesized through a traditional method（Na2CO3 route）, the hierarchical layer-stacking Mn-Ce composite oxide exhibited higher catalytic activity in the complete oxidation of volatile organic compounds（VOCs）. By means of testing, the data revealed that the hierarchical layer-stacking Mn-Ce composite oxide possessed superior physiochemical properties such as good low-temperature reducibility, high manganese oxidation state and rich adsorbed surface oxygen species which resulted in the enhancement of catalytic abilities.展开更多
A monolithic series of Cu-Mn-Ce oxides supported on cordierites with different Cu/Mn/Ce molar ratios were prepared by the in-situ sol-gel method without any binder. The catalysts were characterized by scanning electro...A monolithic series of Cu-Mn-Ce oxides supported on cordierites with different Cu/Mn/Ce molar ratios were prepared by the in-situ sol-gel method without any binder. The catalysts were characterized by scanning electron microscopy （SEM）, energy dispersive spectrometer （EDS）, X-ray diffraction （XRD）, and Brunauer-Emmett-Teller method （BET） and examined in the catalytic combustion of volatile organic compounds （VOCs）. The results showed that the well-dispersed nanometer particles of mixed oxides adhered firmly to the cordierite surface. Cu0.15Mn0.3Ce55/cordierite was identified as the most active catalyst. Compared with commercial Pd/Al2O3, Cu0.15Mn0.3Ce55/cordierite showed higher activities for the combustion of various types of VOCs, especially for oxy-derivative compounds which could be lighted off below 200 ℃.展开更多
基金the financial support from the Natural Science Foundation of China (No. 21107096)Zhejiang Provincial Natural Science Foundation of China (No. Y14E080008)+1 种基金the Commission of Science and Technology of Zhejiang province (No. 2013C03021)the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20133317110004)
文摘Cu-Mn, Cu-Mn-Ce, and Cu-Ce mixed-oxide catalysts were prepared by a citric acid sol-gel method and then characterized by XRD, BET, H_2-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu-Mn-Ce ternary mixed-oxide catalyst with 1：2：4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu-Mn-Ce catalyst, a portion of Cu and Mn species entered into the Ce O2 fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu-Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu-Mn and Cu-Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.
基金Project supported by the National Natural Science Foundation of China(21506194,21676255)the Natural Science Foundation of Zhejiang Province(Y16B070011)the Commission of Science and Technology of Zhejiang Province(2017C03007,2017C33106)
文摘The metal oxides CuMnCe and CeY washcoats on cordierite were prepared using an impregnation method, and then used as support for the active Pt component to prepare the Pt/CuMnCe and Pt/CeY monolithic catalysts for the deep oxidation of VOCs. In comparison with the Pt/CeY, CuMnCe, and CeY monolithic catalysts, the Pt/CuMnCe monolithic catalyst shows an excellent performance for toluene,ethyl acetate,and n-hexane oxidation and the Tis low to 216, 200 and 260 ℃,respectively. The active components Pt/PtO and CuMnCe result in a better synergetic interaction, which promote the catalyst reducibility, increase the oxygen mobility, and enhance the adsorption and activation of organic molecules.
基金supported by Strategic Project of Science and Technology of Chinese Academy of Sciences(XDB05050000)the National Natural Science Foundation of China(51272253)
文摘Hierarchical layer-stacking Mn-Ce composite oxide with mesoporous structure was firstly prepared by a simple precipitation/decomposition procedure with oxalate precursor and the complete catalytic oxidation of VOCs（benzene, toluene and ethyl acetate） were examined. The Mn-Ce oxalate precursor was obtained from metal salt and oxalic acid without any additives. The resulting materials were characterized by X-ray diffraction（XRD）, Brunauer-Emmett-Teller（BET）, scanning electron microscopy（SEM）, energy dispersive X-ray spectroscopy（EDX）, hydrogen temperature programmed reduction（H2-TPR） and X-ray photoelectron spectroscopy（XPS）. Compared with Mn-Ce composite oxide synthesized through a traditional method（Na2CO3 route）, the hierarchical layer-stacking Mn-Ce composite oxide exhibited higher catalytic activity in the complete oxidation of volatile organic compounds（VOCs）. By means of testing, the data revealed that the hierarchical layer-stacking Mn-Ce composite oxide possessed superior physiochemical properties such as good low-temperature reducibility, high manganese oxidation state and rich adsorbed surface oxygen species which resulted in the enhancement of catalytic abilities.
基金Project supported by National Natural Science Foundation of China (21107096)Zhejiang Provincial Natural Science Foundation (Y5090202)
文摘A monolithic series of Cu-Mn-Ce oxides supported on cordierites with different Cu/Mn/Ce molar ratios were prepared by the in-situ sol-gel method without any binder. The catalysts were characterized by scanning electron microscopy （SEM）, energy dispersive spectrometer （EDS）, X-ray diffraction （XRD）, and Brunauer-Emmett-Teller method （BET） and examined in the catalytic combustion of volatile organic compounds （VOCs）. The results showed that the well-dispersed nanometer particles of mixed oxides adhered firmly to the cordierite surface. Cu0.15Mn0.3Ce55/cordierite was identified as the most active catalyst. Compared with commercial Pd/Al2O3, Cu0.15Mn0.3Ce55/cordierite showed higher activities for the combustion of various types of VOCs, especially for oxy-derivative compounds which could be lighted off below 200 ℃.
