This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence accor...This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence according to the population size and the crossover size, so we make it run in different forms during the global and local optimization phases and then forms TPGA. The experiment results show that TPGA is very efficient for the optimization of low-dimension multi-modal functions, usually we can obtain all the global optimal solutions.展开更多
In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombina...In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombination search so that the whole population can be separated into several niches according to the position of solutions; then, in the second level, the niche evolutionary strategy is used for local search in the subspaces gotten in the first level till solutions of the problem are found. The new algorithm has been tested on some hard problems and some good results are obtained.展开更多
In most of real operational conditions only response data are measurable while the actual excitations are unknown, so modal parameter must be extracted only from responses. This paper gives a theoretical formulation f...In most of real operational conditions only response data are measurable while the actual excitations are unknown, so modal parameter must be extracted only from responses. This paper gives a theoretical formulation for the cross-correlation functions and cross-power spectra between the outputs under the assumption of white-noise excitation. It widens the field of modal analysis under ambient excitation because many classical methods by impulse response functions or frequency response functions can be used easily for modal analysis under unknown excitation. The Polyreference Complex Exponential method and Eigensystem Realization Algorithm using cross-correlation functions in time domain and Orthogonal Polynomial method using cross-power spectra in frequency domain are applied to a steel frame to extract modal parameters under operational conditions. The modal properties of the steel frame from these three methods are compared with those from frequency response functions analysis. The results show that the modal analysis method using cross-correlation functions or cross-power spectra presented in this paper can extract modal parameters efficiently under unknown excitation.展开更多
In the current research,an effective differential quadrature method(DQM)has been developed to solve natural frequency and vibration modal functions of circular section beams along radial functional gradient.Based on t...In the current research,an effective differential quadrature method(DQM)has been developed to solve natural frequency and vibration modal functions of circular section beams along radial functional gradient.Based on the high-order theory of transverse vibration of circular cross-section beams,lateral displacement equation was reconstructed neglecting circumferential shear stress.Two equations coupled with deflection and rotation angles were derived based on elastic mechanics theory and further simplified into a constant coefficient differential equation with natural frequency as eigenvalue.Then,differential quadrature method was applied to transform the eigenvalue problem of the derived differential equation into a set of algebraic equation eigenvalue problems.Natural frequencies of the free vibrations of cylindrical beams with circular cross-sections were calculated at one time,and corresponding modal functions were solved together.The obtained numerical results indicated that the natural frequencies of functionally graded(FG)circular cylindrical beams obtained using differential quadrature method agreed with the results reported in related literatures.In addition,influences of varying gradient parameters on the modal shapes of circular cylindrical beams were found to be strongly consistent with previous studies.Numerical results further validated the feasibility and accuracy of the developed differential quadrature method in solving the transverse vibration of FG circular cross-section beams.展开更多
基金Supported by the National Natural Science Foundation of China (70071042,60073043,60133010)
文摘This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence according to the population size and the crossover size, so we make it run in different forms during the global and local optimization phases and then forms TPGA. The experiment results show that TPGA is very efficient for the optimization of low-dimension multi-modal functions, usually we can obtain all the global optimal solutions.
基金Supported by the National Natural Science Foundation of China (70071042,60073043,60133010)
文摘In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombination search so that the whole population can be separated into several niches according to the position of solutions; then, in the second level, the niche evolutionary strategy is used for local search in the subspaces gotten in the first level till solutions of the problem are found. The new algorithm has been tested on some hard problems and some good results are obtained.
基金Item of the 9-th F ive Plan of the Aeronautical Industrial Corporation
文摘In most of real operational conditions only response data are measurable while the actual excitations are unknown, so modal parameter must be extracted only from responses. This paper gives a theoretical formulation for the cross-correlation functions and cross-power spectra between the outputs under the assumption of white-noise excitation. It widens the field of modal analysis under ambient excitation because many classical methods by impulse response functions or frequency response functions can be used easily for modal analysis under unknown excitation. The Polyreference Complex Exponential method and Eigensystem Realization Algorithm using cross-correlation functions in time domain and Orthogonal Polynomial method using cross-power spectra in frequency domain are applied to a steel frame to extract modal parameters under operational conditions. The modal properties of the steel frame from these three methods are compared with those from frequency response functions analysis. The results show that the modal analysis method using cross-correlation functions or cross-power spectra presented in this paper can extract modal parameters efficiently under unknown excitation.
基金supported by the National key Research and Development Plan of Ministry of Science and Technology of the People’s Republic of China(2017YFC0404903).
文摘In the current research,an effective differential quadrature method(DQM)has been developed to solve natural frequency and vibration modal functions of circular section beams along radial functional gradient.Based on the high-order theory of transverse vibration of circular cross-section beams,lateral displacement equation was reconstructed neglecting circumferential shear stress.Two equations coupled with deflection and rotation angles were derived based on elastic mechanics theory and further simplified into a constant coefficient differential equation with natural frequency as eigenvalue.Then,differential quadrature method was applied to transform the eigenvalue problem of the derived differential equation into a set of algebraic equation eigenvalue problems.Natural frequencies of the free vibrations of cylindrical beams with circular cross-sections were calculated at one time,and corresponding modal functions were solved together.The obtained numerical results indicated that the natural frequencies of functionally graded(FG)circular cylindrical beams obtained using differential quadrature method agreed with the results reported in related literatures.In addition,influences of varying gradient parameters on the modal shapes of circular cylindrical beams were found to be strongly consistent with previous studies.Numerical results further validated the feasibility and accuracy of the developed differential quadrature method in solving the transverse vibration of FG circular cross-section beams.
