All-fiberized very-large-mode-area Yb-doped fiber based high-peak-power narrow-linewidth nanosecond amplifier with tunable pulse width and repetition rate

We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the seed source,which is gain-switched to generate nanosecond pulses with tunable pulse widths of 1-200 ns and tunable repetition rates of10 Hz-100 kHz.By utilizing a very-large-mode-area Yb-doped fiber with a core diameter of 50 μm in the power amplifier,thresholds of the stimulated Brillouin scattering at different pulse widths and repetition rates are increased.The maximum average power reaches 30.8 W at the pulse width of 4 ns and a repetition rate of 100 kHz,corresponding to an optical-tooptical conversion efficiency of ~55.2%.Pulse energy and peak power are calculated to be 0.2 mJ and 50 kW,respectively,which are limited by stimulated Brillouin scattering.The 3-dB spectral linewidth remains around 0.05 nm during the power scaling process.The stimulated Brillouin scattering limited output powers at different pulse widths and repetition rates are investigated.Peak power of 47.5 kW(0.19 mJ) is obtained for the 4 ns pulses at a repetition rate of 50 kHz,which is nearly the same as that of 4 ns pulses at 100 kHz.When the pulse width of the seed source is increased to 8 ns,peak powers/pulse energies are decreased to 19.6 kW/0.11 mJ and 13.3 kW/0.08 mJ at repetition rates of 50 kHz and 100 kHz,respectively.

Numerical analysis of photonic crystal fiber with chalcogenide core tellurite cladding composite microstructure

Kinds of photonic crystal fibers with chalcogenide core tellurite cladding composite microstructure are proposed. The multi-core photonic crystal fiber can reach the higher nonlinearity coefficient and the larger effective mode area. The small single-core photonic crystal fiber has a very high nonlinearity coefficient. At the wavelength λ=0.8μm, the nonlinearity coefficient can reach 31.37053 W-1·m-1, at the wavelength λ=1.55μm, the nonlinearity coefficient is 11.19686W-1·m-1.

Hybrid plasmon waveguides with metamaterial substrate and dielectric substrate:A contrastive study

Hybrid plasmon waveguides, respectively, with metamaterial substrate and dielectric substrate are investigated and analyzed contrastively with a numerical finite element method. Basic properties, including propagation length Lp, effective mode area Aeff, and energy distribution, are obtained and compared with waveguide geometric parameters at 1.55 gin. For the waveguide with metamaterial substrate, propagation length Lp increases to several tens of microns and effective mode area Aeff is reduced by more than 3 times. Moreover, the near field region is expanded, leading to potential applications in nanophotonics. Therefore, it could be very helpful for improving the integration density in optical chips and developing functional components on a nanometer scale for all optical integrated circuits.

Yb-doped large-pitch fibres: effective single-mode operation based on higher-order mode delocalisation

Rare earth-doped fibres are a diode-pumped,solid-state laser architecture that is highly scalable in average power.The performance of pulsed fibre laser systems is restricted due to nonlinear effects.Hence,fibre designs that allow for very large mode areas at high average powers with diffraction-limited beam quality are of enormous interest.Ytterbium-doped,rod-type,large-pitch fibres(LPF)enable extreme fibre dimensions,i.e.,effective single-mode fibres with mode sizes exceeding 100 times the wavelength of the guided radiation,by exploiting the novel concept of delocalisation of higher-order transverse modes.The non-resonant nature of the operating principle makes LPF suitable for high power extraction.This design allows for an unparalleled level of performance in pulsed fibre lasers.

Amplification characteristics in active tapered segmented cladding fiber with large mode area

A kind of tapered segmented cladding fiber(T-SCF)with large mode area(LMA)is proposed,and the mode and amplification characteristics of T-SCFs with concave,linear,and convex tapered structures are investigated based on finite-element method(FEM)and few-mode steady-state rate equation.Simulation results indicate that the concave tapered structure can introduce high loss for high-order modes(HOMs)that is advantageous to achieve single-mode operation,whereas the convex tapered structure provides large effective mode area that can help to mitigate nonlinear effects.Meanwhile,the small-to-large amplification scheme shows further advantages on stripping off HOMs,and the large-to-small amplification scheme decreases the heat load density induced by the high-power pump.Moreover,singlemode propagation performance,effective mode area,and heat load density of the T-SCF are superior to those of tapered step index fiber(T-SIF).These theoretical model and numerical results can provide instructive suggestions for designing high-power fiber lasers and amplifiers.

Self-adjustment of a nonlinear lasing mode to a pumped area in a two-dimensional microcavity [Invited]

We numerically performed wave dynamical simulations based on the Maxwell–Bloch(MB) model for a quadrupole-deformed microcavity laser with spatially selective pumping. We demonstrate the appearance of an asymmetric lasing mode whose spatial pattern violates both the x-and y-axes mirror symmetries of the cavity.Dynamical simulations revealed that a lasing mode consisting of a clockwise or counterclockwise rotating-wave component is a stable stationary solution of the MB model. From the results of a passive-cavity mode analysis, we interpret these asymmetric rotating-wave lasing modes by the locking of four nearly degenerate passive-cavity modes. For comparison, we carried out simulations for a uniform pumping case and found a different locking rule for the nearly degenerate modes. Our results demonstrate a nonlinear dynamical mechanism for theformation of a lasing mode that adjusts its pattern to a pumped area.

Experimental Investigation of Macro-Bending Loss in Large Mode Area Photonic Crystal Fibers

We measured macro-bending losses for two large mode area photonic crystal fibers. Experimental results show that macro-bending loss and loss window are dependent on the parameter d/∧ and number of air-holes ring in the cladding.

Loss characteristics of helical-core fiber

A special optical fiber is investigated, which has a helical core in the cylindrical cladding. The beam propagation method （BPM） is used for analyzing the impacts of the geometric and physical parameters on the properties of mode losses of the helical-core fiber. The propagation loss is 0.32 dB/m for the fundamental mode and the propagation loss is 20.95 dB/m for the LPu mode in the wavelength range of 1050-1065 nm when the core diameter is 19 μm, the pitch of the core＇s helix is 2.66 mm, and the offset of the helix core from the center of the fiber axis is 31 μm. The core diameter of the single-mode helical-core fiber well exceeds that of the conventional large-mode-area fiber. The helical-core fiber can provide the effec- tive large-mode-area single-mode operation without coiling fiber or selecting excitation mode.