Measurement of remanent magnetic moment using a torsion pendulum with single frequency modulation method

In Tian Qin spaceborne gravitational-wave detectors, the stringent requirements on the magnetic cleanliness of the test masses demand the high resolution ground-based characterization measurement of their magnetic properties. Here we present a single frequency modulation method based on a torsion pendulum to measure the remanent magnetic moment mr of 1.1 kg dummy copper test mass, and the measurement result is(6.45 ± 0.04(stat) ± 0.07(syst)) × 10^(-8)A · m^(2). The measurement precision of the mr is about 0.9 n A · m^(2), well below the present measurement requirement of Tian Qin. The method is particularly useful for measuring extremely low magnetic properties of the materials for use in the construction of space-borne gravitational wave detection and other precision scientific apparatus.

Nano/Micro HKUST-1 Fabricated by Coordination Modulation Method at Room Temperature

A simple and fast route for the synthesis of metal-organic framework（MOF） particles was presented.Cu 3（BTC） 2（HKUST-1,BTC=1,3,5-benzenetricarboxylate）,one of the most well-known MOFs,was synthesized at room temperature via coordination modulation method.By adding different modulators（monocarboxylic acids） into the reaction system,the morphologies of HKUST-1 crystals were tuned from nano spheres to micro octahedrons at room temperature without any complex equipment.X-Ray diffractions and gas sorption measurements revealed highly crystalline particles with large Brunauer-Emmett-Teller（BET） surface areas（1116―1273 m^ 2 /g） and total pore volumes（0.62―0.73 cm^ 3 /g）.The significantly small particle sizes and high capacity of gas sorption are considered advantageous for envisaged application in practical industrial process.

Temporally Modulated Phase Retrieval Method for Weak Temporal Phase Measurement of Laser Pulses

We propose a simple iterative algorithm based on a temporally movable phase modulation process to retrieve the weak temporal phase of laser pulses. This unambiguous method can be used to achieve a high accuracy and to simultaneously measure the weak temporal phase and temporal profile of pulses, which are almost transform- limited. A detailed analysis shows that this iterative method has valuable potential applications in the charac- terization of pulses with weak temporal phase.

An efficient focusing model for generation of freak waves

Based on the Longuet-Higgins wave model theory, the previews studies have shown that freak waves can be generated in finite space and time successfully. However, as to generating high nonlinear freak waves, the simulation results will be unrealistic. Therefore, a modified phase modulation method for simulating high nonlinear freak waves was developed. The surface elevations of some wave components at certain time and place are positive by modulating the corresponding random initial phases, then the total surface elevation at the focused point is enhanced and furthermore a freak wave event is generated. The new method can not only make the freak wave occur at certain time and place, but also make the simulated wave surface time series satisfy statistical properties of the realistic sea state and keep identical with the target wave spectrum. This numerical approach is of good precision and high efficiency by the comparisons of the simulated freak waves and the recorded freak waves.

Magnetic van der Waals materials:Synthesis,structure,magnetism,and their potential applications

As the family of magnetic materials is rapidly growing,two-dimensional(2D)van der Waals(vdW)magnets have attracted increasing attention as a platform to explore fundamental physical problems of magnetism and their potential applications.This paper reviews the recent progress on emergent vd W magnetic compounds and their potential applications in devices.First,we summarize the current vd W magnetic materials and their synthetic methods.Then,we focus on their structure and the modulation of magnetic properties by analyzing the representative vd W magnetic materials with different magnetic structures.In addition,we pay attention to the heterostructures of vd W magnetic materials,which are expected to produce revolutionary applications of magnetism-related devices.To motivate the researchers in this area,we finally provide the challenges and outlook on 2D vd W magnetism.

A method of multichannel chaotic phase modulation spread spectrum and its application in underwater acoustic communication

Direct-sequence spread spectrum （DSSS） communication possesses low probability of detection and has been widely used in confidential communications. However, pseudo-noise （PN） sequences, used as spreading code in conventional DSSS communications, possess peri- odic character and binary value. In hostile environments, these distinct characters may lead to some important parameters of signals being estimated accurately, and then lead to the leakage of transmitted information. To solve the problem, we propose the chaotic phase modulation （CPM） sequence alternating the PN sequences. CPM sequence has complex values and constant envelope, and also possesses large quantity and good correlation characteristics. Moreover, it has more hidden features than conventional sequences by modulating its phases using chaotic sequence. To improve the data rate, we apply it into the technique of multichannel communica-tion. Simulation results show this scheme＇s superior bit error ratio （BER） performance, which demonstrates its feasibility in underwater acoustic communications.

Static loading and vertical displacement at southern Siberia

Seismic method is usually used for elastic parametric estimation. This is why this method presents dynamic parameters of Earth. Frequency seismic range changes greatly from geodynamic modelling time. Now we have opportunity to use geodesy result for some years for elastic parameters estimation. Static solution from elastic theory may be used for the interpretation of long term results. It presents static elastic parameter. The inverse problem for different types of vertical surface loading on one year period is calculated. Two cases of loading with maximal and minimal area are presented. Results are determined by space geodesy and leveling methods. Current relation between atmospheric pressure and vertical displacements was estimated at the center of Siberian Anti Cyclone with size varied from 2000 km to 3000 kin. Pressure-displacement coefficients （PDC） can be achieved by three years obser- vation （0.997 mm/mbar for NVSK GPS station）. It is used for elastic module study of geology medium with maximum thickness up to 600 km. In the context of elastic model, the modulus of rigidity is estimated to be 113 GPa. Vast expanse of anti-cyclone may relate with rheology of crust and upper mantle. Smaller size of surface loading - local loading is seasonal variation of water reservoir. Annual vertical changes were obtained by leveling near the dam of the reservoir. PDC ratio was 1.15 mm/bar for these places. In elastic theory, the Young modulus E = 80 GPa （Poisson ratio = 0.25, the modulus of rigidity - 32 GPa） was calculated by sixteen years of leveling measurements. This result can effectively be represented for upper crust. Our results were checked by solution for coseismic displacement of Chyia- Altai earthquake （Sep. 27, 2003, M = 7.3）. Coseismic results calculated by static modules agree with experimental coseismic GPS data at 10% level.

FDTD Method in the Analysis of Lithium Niobate Modulator

The Mach-Zehnder traveling-wave lithium niobate modulator is simulated by time domain finite difference (FDTD) method for different device geometry. The result is comparable to the reported value by finite element method.

A Simplified Numerical Simulation Method Considering Active Devices for Opto-Electronic Mixed Modules

A simplified simulation method based on the FDTD technique that can handle active devices is proposed. This method well suits the electrical crosstalk analysis of multi-channel integrated, opto-electronic mixed modules. We apply this method to an 8-channel integrated super-compact high-sensitivity optical module. The results show good agreement between simulations and measurements.

Characterizing a liquid crystal spatial light modulator at oblique incidence angles using the self-interference method

The phase modulation characteristics of a reflective liquid crystal （LC） spatial light modulator （SLM） under oblique incidence are studied by using our proposed self-interference method. The experimental setup of the method is very simple and has good robustness to mechanical vibrations. By changing the gray value of the combined grayscale loaded on the LC-SLM, different sheared fringe patterns, generated by the interference between the constant phase-modulated beam and the ＋1-order diffracted beam of the blazed grating, can be obtained. The amount of phase modulation of the LC-SLM is obtained by subtracting the phase of the two side lobes in the frequency domain. By turning the turntable where the SLM is mounted, the phase modulation characteristics at different incident angles can be measured. The experimental results show that the phase modulation curves do not change significantly with the small angle. When the angle is large （i.e. larger than 10°）, the phase modulation curves become different, especially for the high gray levels. With the increase of the incident angle, the phase modulation depth is reduced. The results indicate that the incident angle plays an important role in the performance of the phase modulation of an LC-SLM.

Ultra-wide tuning single channel filter based on one-dimensional photonic crystal with an air cavity

By inserting an air cavity into a one-dimensional photonic crystal of LiF/GaSb, a tunable filter covering the whole visible range is proposed. Following consideration of the dispersion of the materials, through modulating the thickness of the air cavity, we demonstrate that a single resonant peak can shift from 416.1 to 667.3 nm in the band gap at normal incidence by means of the transfer matrix method. The research also shows that the transmittance of the channel can be maximized when the number of periodic Li F/Ga Sb layers on one side of the air defect layer is equal to that of the other side. When adding a period to both sides respectively, the full width at half maximum of the defect mode is reduced by one order of magnitude. This structure will provide a promising approach to fabricate practical tunable filters in the visible region with ultra-wide tuning range.