Moment tensor and stress inversion solutions of acoustic emissions during compression and tensile fracturing in crystalline rocks

We investigate the accuracy and robustness of moment tensor(MT)and stress inversion solutions derived from acoustic emissions(AEs)during the laboratory fracturing of prismatic Barre granite specimens.Pre-cut flaws in the specimens introduce a complex stress field,resulting in a spatial and temporal variation of focal mechanisms.Specifically,we consider two experimental setups:(1)where the rock is loaded in compression to generate primarily shear-type fractures and(2)where the material is loaded in indirect tension to generate predominantly tensile-type fractures.In each test,we first decompose AE moment tensors into double-couple(DC)and non-DC terms and then derive unambiguous normal and slip vectors using k-means clustering and an unstructured damped stress inversion algorithm.We explore temporal and spatial distributions of DC and non-DC events at different loading levels.The majority of the DC and the tensile non-DC events cluster around the pre-cut flaws,where macro-cracks later develop.Results of stress inversion are verified against the stress field from finite element(FE)modeling.A good agreement is found between the experimentally derived and numerically simulated stress orientations.To the best of the authors’knowledge,this work presents the first case where stress inversion methodologies are validated by numerical simulations at laboratory scale and under highly heterogeneous stress distributions.

Using Long-Period Body Wave to Inverse Moment Tensors of the M_S6.8 Jiashi,Xinjiang Earthquake in 2003 and the Moderate and Small Earthquakes before and after It

An M_S6.8 strong earthquake took place in Jiashi,Xinjiang on February 24 of 2003.The digital wave form data recorded in Kashi and Wushi stations are selected to inverse the moment tensor solutions for the strong earthquake and the moderate and small earthquakes before and after it(108 earthquakes in 2001～2004).67 focal mechanism solutions have been calculated,and the results agree with those from Harvard University and USGS.The analysis reveals that before the strong earthquake,the moderate and small earthquake distribution was dispersed,and after the event the distribution was mainly concentrated around the strong earthquake.Before the strong earthquake,the seismic faults of the mid and small events had the character of strike-slip and normal faulting,and after the event,they exhibit strike-slip and thrust faulting.The region is dominated by near-NS horizontal compression from the southern block after the strong earthquake.

Moment tensor inversion of the November 6, 1988 MS=7.6, Lancang-Gengma, China,earthquake using long-period body-waves data

Moment tensor inversion was carried out to myert the source mechanism and source time function of the Ms=7.6November 6. 1988, Lancang-Gengma. Yunnan Province, Chin4 earthquake. Waveforms of long-period bodywaves recorded by China Digital Seismograph Network (CDSN) were used in the inversion. The inverted resultshows one nodal plane of right-lateral strike-slip faulting and another of left-lateral strike-slip faulting and a simplesource time function of a duration of about 15 s and scalar seismic moment of 6.4x 102oN-N-m From the geologicaldata and tectonic settings and also from field observations and epicentral distribution of aftershocks, the nodalplane striking in the azimuth of 313° is preferred as the fault plane. The pressure axis lies almost horizontally innorth-south direction.

An early warning method for water inrush in Dongjiahe coal mine based on microseismic moment tensor

Dongjiahe Coal Mine belongs to the Carboniferous Permian coal field which has a high degree of karst and fissure development.This paper takes the working face of Dongjiahe Coal Mine as an example;through the microseismic(MS)monitoring system arranged on the working face,the moment tensor theory was used to invert the focal mechanism solution of the anomalous area of the floor MS event;combining the numerical simulation and field data,the underlying floor faults were identified by the stress inversion method.The results show that:1)Moment tensors were decomposed into three components and the main type of rupture in this area is mixed failure according to the relative criterion;2)The hidden fault belongs to the reversed fault,its dip angle is approximately 70°,and the rupture length is 21 m determined by the inversion method of the initial dynamic polarity and stress in the focal mechanism;3)The failure process of the fault is divided into three stages by numerical simulation method combined with the temporal and spatial distribution of MS events.The results can provide a reference for early warning and evaluation of similar coal mine water inrush risks.

Moment tensor inversion for the focal mechanism of the Dongfang (Hainan) earthquake swarm

Moment tensor inversion for the focal mechanism of the 12 earthquakes of the Dongfang (Hainan) earthquakeswarm occurred from June to August 1992 with near-source broadband data recorded by a temporal small-aperturenetwork consisting of DCS-302 digital three-component accelerographs. The results inverted indicate that thepredominant components of sources of all these 12 earthqualles were shear dislocations. The principal pressureaxis and the principal tension axis are in NW-SE direction and in NE-SW direction, respectively, and their dips arealmost horizontal. It could infer that these earthquakes occurred within the same ambient stress field.

Moment tensor inversion of small to moderate earthquakes in the Capital Region in 2004

The moment tensor solutions of 51 small to moderate earthquakes occurred in the Capital Region in the year of 2004 are obtained by inverting the broadband waveform data. Accordingly, other source parameters, such as scalar seismic moments, moment magnitudes, double-couple （DC） components and compensated-linear-vector-dipole （CLVD） components, are determined as well as fault parameters and stress-axis parameters. The inverted results are evaluated by groups of numerical tests.

Moment tensor inversion for focal mechanism of the Beibuwan earthquakes

Two earthquakes of Ms=6.0 and Ms=6. 1 consecutively occurred on December 31, 1994 and January 10, 1995 in Beibuwan region, China. By using the generalized reflection-transmission coefficient matrix and the discrete slowness integration method in the calculation of Green's functions, we obtained the focal mechanisms of these earthquakes using long-period waveforms of regional body waves recorded by the China Digital Seismograph Network (CDSN) by means of moment tensor inversion method in frequency domain. The results inverted indicate that the focal mechanisms of these two earthquakes were similar to each other. Their principal compressional stresses are in NW-SE direction and principal tensional stresses are in NE-SW direction. It turns out that the occurrence of the two earthquakes was controlled by the same tectonic environment related to the collision of the Philippine Plate and the Eurasian Plates. On the other hand, the results imply that the stress field in the seismogenic region has a significant change after the Ms=6.0 earthquake. It may be proposed that the occurrence of the Ms=6. 1 earthquake could be related to the stress field adjustment caused by the Ms=6.0 earthquake.

Moment tensor inversion of focal mechanism for the aftershock sequence of 1982 Lulong M_S =6.1 earthquake

Using the moment tensor inversion method, we calculate the focal mechanisms of the aftershock sequence of the Ms=6.1 Lulong earthquake occurred on October 19, 1982 in Hebei Province. We found that the pressure axis in Lulong basin is nearly in the east-west direction with an azimuth of N74°E. However, in the north of the basin the stress axis changes to N43°E; and in some places near the center of the basin it changes to the northwest that is almost perpendicular to the P axis obtained by us from those events around the basin. This feature illuminates that in Lulong earthquake sequence, the stress direction is different in different parts of crustal structure, which shows that the tectonic movement in Lulong region is complex. This is because that Lulong is located in the eastern part of Chinese mainland and is subject to the compression of Japanese Sea Basin driven by the Pacific Plate. On the other hand, nipped by the Yanshan and North China blocks, Lulong is obviously restricted by the block boundaries.

Moment tensor inversion and source rupture process of the September 27, 2003 M_S=7.9 earthquake occurred in the border area of China, Russia and Mongolia

plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of MS=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M0=0.97 × 1020 N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the MS=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.

Discussion on moment tensor solution and seismogenic structure of Ruichang-Yangxin earthquake on 10 September 2011

Ruichang-Yangxin earthquake is another moderate earthquake in Yangxin-Jiujiang area since 2005 Jiujiang-Ruichang M5.7 earthquake. In order to more understand the seismic activities in this area, we study the moment tensor solution and the seismogenic structure of the Ruichang-Yangxin earthquake. Precise earthquake relocation shows that the mainshock occurred on the southwestern part of the NE-trending fault and aftershocks are distributed not only along the NE-trending fault but also along its conjugated NW-trending fault. By comprehensive analysis on the earthquake distribution, characteristics of isoseismal curve, focal mechanism, and regional structure characteristics, it is inferred that this earthquake is caused by the NE-trending Tanlu fault. In addition, it has close relationship with the conjugated NW-trending fault as well. Many researches have shown that the junction area is the earthquake-prone area, and should be paid more attention to. And our study also proves this viewpoint.

Strong Earthquake Sequences in Greece during 2008-2014: Moment Tensor Inversions and Fault Plane Discrimination

As is well known, Greece has a significant number of earthquakes each year. Ιn recent years, several earthquakes have occurred in Greece. For this scope, a methodology was used to determine the source parameters. This methodology is based on minimizing the difference between the observed and the synthetic waveforms, using the method Source Parameters Calculation—SPCa [1]. The source parameters, using the proposed methodology, are calculated by comparing observed seismograms and synthetic by inverting data. The synthetics are calculated using the reflectivity method (Kennett, 1983) as implemented by Randall et al. (1994) for a given earth structure. This study includes inversion results for the strongest events that occurred in Greece from 2008 to 2014. For the same events calculated the main fault plane, using the method of Hypocenter Centroid-plot (HC-plot) [2] [3]. This methodology is a simple geometrical method based on the combination between the hypocentral position and the two possible fault planes.

Rapid Determination of the Centroid Moment Tensor of the 2014 M_S7.3 Yutian,Xinjiang Earthquake

We successfully employ an automatic centroid moment tensor(CMT) inversion system to infer the CMT solutions of the February 12,2014 MS7.3 Yutian,Xinjiang earthquake using near-field seismic waveforms(4° < △ < 12°) observed by the virtual China seismic networks,which have been recently set up.The results indicate that this event occurred on a rupture plane(strike 243°,dip 70°,and rake-18°),showing left-lateral strike-slip faulting with a minor normal-faulting component.The centroid in the horizontal direction is located nearly 13 km east of the epicenter(36.123° N,82.499° E),and the best-fitting centroid depth is around 10 km.The total scalar moment,M0,is retrieved with an average value of 3.05 × 1019N·m,corresponding to moment magnitude MW6.92.Most of the energy is released within about 14 s.Moreover,we discuss about the potential application of this system in earthquake disaster decision.

The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

Tensile strength and failure behavior of rock-mortar interfaces: Direct and indirect measurements

The tensile strength at the rock-concrete interface is one of the crucial factors controlling the failure mechanisms of structures,such as concrete gravity dams.Despite the critical importance of the failure mechanism and tensile strength of rock-concrete interfaces,understanding of these factors remains very limited.This study investigated the tensile strength and fracturing processes at rock-mortar interfaces subjected to direct and indirect tensile loadings.Digital image correlation(DIC)and acoustic emission(AE)techniques were used to monitor the failure mechanisms of specimens subjected to direct tension and indirect loading(Brazilian tests).The results indicated that the direct tensile strength of the rock-mortar specimens was lower than their indirect tensile strength,with a direct/indirect tensile strength ratio of 65%.DIC strain field data and moment tensor inversions(MTI)of AE events indicated that a significant number of shear microcracks occurred in the specimens subjected to the Brazilian test.The presence of these shear microcracks,which require more energy to break,resulted in a higher tensile strength during the Brazilian tests.In contrast,microcracks were predominantly tensile in specimens subjected to direct tension,leading to a lower tensile strength.Spatiotemporal monitoring of the cracking processes in the rock-mortar interfaces revealed that they show AE precursors before failure under the Brazilian test,whereas they show a minimal number of AE events before failure under direct tension.Due to different microcracking mechanisms,specimens tested under Brazilian tests showed lower roughness with flatter fracture surfaces than those tested under direct tension with jagged and rough fracture surfaces.The results of this study shed light on better understanding the micromechanics of damage in the rock-concrete interfaces for a safer design of engineering structures.

Properties of three seismic events in September 2017 in the northern Korean Peninsula from moment tensor inversion

In September 2017 three noticeable seismic events occurred in the northern Korean Peninsula （Fig. 1; Table 1）. Democratic People＇s Republic of Korea （DPRK） authorities announced that the first M6.3 event on September 3rd was a ＂successfully conducted hydrogen-bomb test＂. The M4.6 event, some 8 min followed, was regarded as an implosion.

Source parameters determination for earthquakes in Kushiro,Japan considering source time function

This paper applies a new formulation to do moment tensor inversion for earthquakes in the Kushiro area of Japan. Comparing with conventional moment tensor inversion method, the new one takes the effect of source time function into consideration. For the inversion, best solution is obtained by minimizing the difference between the observed seismograms and the synthetic ones. And the best-fitting focal depth is determined from the variance reduction. The results indicate that half duration of source time function is proportional to the magnitude of earthquakes. Large earthquakes have long half duration, whereas that of moderate-small earthquakes is comparatively shorter. The focal mechanisms of all three earthquakes are of thrust fault type, which is mainly ascribed to the collision of the North American plate with the Eurasia plate in the late Cretaceous or Paleogene.