Well-Drilling and Groundwater Monitoring Network Construction:Taking Changde City as an Example

Entrusted by the Environmental Protection Bureau of Changde City,we conducted drilling,sampling survey and constructed a monitoring network for groundwater in several counties and districts of Changde City.This article introduces the drilling technology,detection method and detection network layout plan adopted in the project,and expounds the problems that occurred while executing the project,in order to provide reference for similar groundwater capacity supervision and construction projects.

Current situation and trend of marine data buoy and monitoring network technology of China

Marine data buoy can provide a long-term, continuous, real-time, reliable data of ocean observation in a variety of complex marine environment. It is one of the most reliable, most effective and important means of ocean monitoring technology. In this paper, the classification, main theory and technology system of marine data buoy are summarized. The typical technological breakthrough of the development of marine data buoy in recent years is summarized. The composition and application of marine monitoring network in China was introduced, and the gap between the technology of China＇s marine data buoy and the international advanced countries is compared.Combined on the situation and demand of China＇s current situation and needs, the development trend of marine data buoy and buoy monitoring network are expected.

Upgrading a regional groundwater level monitoring network for Beijing Plain,China

Monitoring of regional groundwater levels provides important information for quantifying groundwater depletion and assessing impacts on the environment. Historically, groundwater level monitoring wells in Beijing Plain, China, were installed for assessing groundwater resources and for monitoring the cone of depression. Monitoring wells are clustered around well fields and urban areas. There is urgent need to upgrade the existing monitoring wells to a regional groundwater level monitoring network to acquire information for integrated water resources management. A new method was proposed for designing a regional groundwater level monitoring network. The method is based on groundwater regime zone mapping. Groundwater regime zone map delineates distinct areas of possible different groundwater level variations and is useful for locating groundwater monitoring wells. This method was applied to Beijing Plain to upgrade a regional groundwater level monitoring network.

Preliminary Hydrogeologic Modeling and Optimal Monitoring Network Design for a Contaminated Abandoned Mine Site Area: Application of Developed Monitoring Network Design Software

In abandoned mine sites, i.e., mine sites where mining operations have ended, wide spread contaminations are often evident, but the potential sources and pathways of contamination especially through the subsurface, are difficult to identify due to inadequate and sparse geochemical measurements available. Therefore, it is essential to design and implement a planned monitoring net-work to obtain essential information required for establishing the potential contamination source locations, i.e., waste dumps, tailing dams, pits and possible pathways through the subsurface, and to design a remediation strategy for rehabilitation. This study presents an illustrative application of modeling the flow and transport processes and monitoring network design in a study area hydrogeologically resembling an abandoned mine site in Queensland, Australia. In this preliminary study, the contaminant transport process modeled does not incorporate the reactive geochemistry of the contaminants. The transport process is modeled considering a generic conservative contaminant for the illustrative purpose of showing the potential application of an optimal monitoring design methodology. This study aims to design optimal monitoring network to: 1) minimize the contaminant solute mass estimation error;2) locate the plume boundary;3) select the monitoring locations with (potentially) high concentrations. A linked simulation optimization based methodology is utilized for optimal monitoring network design. The methodology is applied utilizing a recently developed software package CARE-GWMND, developed at James Cook University for optimal monitoring network design. Given the complexity of the groundwater systems and the sparsity of pollutant concentration observation data from the field, this software is capable of simulating the groundwater flow and solute transport with spatial interpolation of data from a sparse set of available data, and it utilizes the optimization algorithm to determine optimum locations for implementing monitoring wells.

Optimization of Air Quality Monitoring Network Using GIS Based Interpolation Techniques

This paper proposes a simple method of optimizing Air Quality Monitoring Network (AQMN) using Geographical Information System (GIS), interpolation techniques and historical data. Existing air quality stations are systematically eliminated and the missing data are filled in using the most appropriate interpolation technique. The interpolated data are then compared with the observed data. Pre-defined performance measures root mean square error (RMSE), mean absolute percentage error (MAPE) and correlation coefficient (r) were used to check the accuracy of the interpolated data. An algorithm was developed in GIS environment and the process was simulated for several sets of measurements conducted in different locations in Riyadh, Saudi Arabia. This methodology proves to be useful to the decision makers to find optimal numbers of stations that are needed without compromising the coverage of the concentrations across the study area.

Identification of Contaminant Source Characteristics and Monitoring Network Design in Groundwater Aquifers: An Overview

The groundwater system is often polluted by different sources of contamination where the sources are difficult to detect. The presence of contamination in groundwater poses significant challenges to its delineation and quantification. The remediation of a contaminated site requires an optimal decision making system to identify the pollutant source characteristics accurately and efficiently. The source characteristics are generally identified using contaminant concentration measurements from arbitrary or planned monitoring locations. To effectively characterize the sources of pollution, the monitoring locations should be selected appropriately. An efficient monitoring network will result in satisfactory characterization of contaminant sources. On the other hand, an appropriate design of monitoring network requires reliable source characteristics. A coupled iterative sequential source identification and dynamic monitoring network design, improves substantially the accuracy of source identification model. This paper reviews different source identification and monitoring network design methods in groundwater contaminant sites. Further, the models for sequential integration of these two models are presented. The effective integration of source identification and dedicated monitoring network design models, distributed sources, parameter uncertainty, and pollutant geo-chemistry are some of the issues which need to be addressed in efficient, accurate and widely applicable methodologies for identification of unknown pollutant sources in contaminated aquifers.

Entropy-Based Approach to Remove Redundant Monitoring Wells from Regional-Scale Groundwater Network

An entropy-based approach is applied to identify redundant wells in thenetwork. In the process of this research, groundwater-monitoring network is considered as acommunication system with a capability to transfer information, and monitoring wells are taken asinformation receivers. The concepts of entropy and mutual information are then applied to measurethe information content of individual monitoring well and information relationship betweenmonitoring well pairs. The efficiency of information transfer among monitoring wells is the basis tojudge the redundancy in the network. And the capacity of the monitoring wells to provideinformation on groundwater is the point of evaluation to identify redundant monitoring wells. Thisapproach is demonstrated using the data from a regional-scale ground-water network in Hebei plain,China The result shows that the entropy-based method is recommendable in optimizing groundwaternetworks, especially for those within media of higher heterogeneities and ani-sotropies.

Multilevel Pattern Mining Architecture for Automatic Network Monitoring in Heterogeneous Wireless Communication Networks

The rapid development of network technology and its evolution toward heterogeneous networks has increased the demand to support automatic monitoring and the management of heterogeneous wireless communication networks.This paper presents a multilevel pattern mining architecture to support automatic network management by discovering interesting patterns from telecom network monitoring data.This architecture leverages and combines existing frequent itemset discovery over data streams,association rule deduction,frequent sequential pattern mining,and frequent temporal pattern mining techniques while also making use of distributed processing platforms to achieve high-volume throughput.

Efficient Bayesian networks for slope safety evaluation with large quantity monitoring information

New sensing and wireless technologies generate massive data. This paper proposes an efficient Bayesian network to evaluate the slope safety using large-quantity field monitoring information with underlying physical mechanisms. A Bayesian network for a slope involving correlated material properties and dozens of observational points is constructed.

Power Line Monitoring Data Transmission Using Wireless Sensor Network

The WSN used in power line monitoring is long chain structure, and the bottleneck near the Sink node is more obvious. In view of this, A Sink nodes’ cooperation mechanism is presented. The Sink nodes from different WSNs are adjacently deployed. Adopting multimode and spatial multiplexing network technology, the network is constructed into multi-mode-level to achieve different levels of data streaming. The network loads are shunted and the network resources are rationally utilized. Through the multi-sink nodes cooperation, the bottlenecks at the Sink node and its near several jump nodes are solved and process the competition of communication between nodes by channel adjustment. Finally, the paper analyzed the method and provided simulation experiment results. Simulation results show that the method can solve the funnel effect of the sink node, and get a good QoS.

Comparison of Using an Electronic System and Conventional Monitoring Method for Monitoring the Quality of Drinking Water and Defects Discovery in Rural Area Water Distribution Network of Abarkouh, Iran

The used water for human consumption must be free of microorganisms and chemicals that cause risk in the human health. In this study, water quality of 18 rural area of Abarkouh was determined and compared the conventional monitoring method (According to ISIR (Institute of Standards and Industrial Research of Iran), 1053 and 4208) and use of electronic system method (Patent in industrial property general office of Iran, 77815). Free chlorine monitoring and pH test done by health workers in the conventional method and the results will be sent to the Health Network monthly. Sampling for microbiological testing is done monthly based on population (According to ISIR, 4208). On the electronic system, the procedure is also done by health workers, but the result will be sent to the receiver device by using a cell phone. According to the chlorine test results if the free chlorine residual reported zero, microbiological sampling was done by a health expert. Finally, the number of chlorine test and microbiological sampling and the results of these experiments collected in the both methods and recorded in SPSS 22 then were analyzed by using chi-square test and Fisher exact test. The result of microbiological experiments shows that the sampling rate decreased 29% in using of electronic system method in comparison to the conventional monitoring method while the number of microbial defect detection increased 19% in drinking water networks monitoring by electronic system. Using of electronic system monitoring can reduce the rate and cost of microbiological sampling and its experiments and increase accuracy of these tests, in this way it will increase the quality and safety of drinking water in distribution network in small and dispersed rural communities.

Groundwater level monitoring-importance global groundwater monitoring network

The paper illustrates the concept, methodology, essential components and importance of groundwater level monitoring in terms of various aquifers such as multiple aquifer, karst aquifer and other aquifers. The groundwater resources in Mekong countries including Cambodia, Laos PDR, Myanmar, Thailand and Vietnam have also been reviewed. Finally, the author briefly presents Global Groundwater Monitoring Network.

A multipath routing protocol for wireless sensor network for mine security monitoring

Underground mining is a hazardous industrial activity. In order to provide a safe working environment for miners, a Wireless Sensor Network (WSN) technology has been used for security monitoring. It can provide a wide range of surveillance with a relatively low cost. In this study, an Energy-Based Multipath Routing (EBMR) protocol is proposed, which considers residual energy capacity and link quality in choosing hops and routing paths. Hops and paths with a high residual energy capacity and link quality will have the best chance to be selected to transmit data packages. Since the EBMR stores several routes in the routing table, when the current path fails, another path will be chosen to fulfill the task immediately. In this way, EBMR improves reliability and decrease time latency. Compared to AOMDV and REAR, EBMR decreases time latency by 51% and 12%.

The Distributed Network Monitoring Model with Bounded Delay Constraints

We address the problem of optimizing a distributed monitoring system and the goal of the optimization is to reduce the cost of deployment of the monitoring infrastructure by identifying a minimum aggregating set subject to delay constraint on the aggregating path. We show that this problem is NP-hard and propose approximation algorithm proving the approximation ratio with lnm+1, where is the number of monitoring nodes. At last we extend our modal with more constraint of bounded delay variation. Key words network - distributed monitoring - delay constraint - NP-hard CLC number TP 393 Foundation item: Supported by the National Natural Science Foundation of China (60373023)Biography: LIU Xiang-hui(1973-), male, Ph. D. candidate, research direction: algorithm complexity analysis, QoS in Internet.

Integrated Sequential Groundwater Contaminant Source Characterization and Pareto-Optimal Monitoring Network Design Application for a Contaminated Aquifer Site

Accurate and reliable groundwater contaminant source characterization with limited contaminant concentration monitoring measurement data remains a challenging problem. This study presents an illustrative application of developed methodologies to a real-life contaminated aquifer. The source characterization and optimal monitoring network design methodologies are used sequentially for a contaminated aquifer site located in New South Wales, Australia. Performance of the integrated optimal source characterization methodology combining linked simulation-optimization, fractal singularity mapping technique (FSMT) and Pareto optimal solutions is evaluated. This study presents an integrated application of optimal source characterization with spatiotemporal concentration measurement data obtained from sequentially designed monitoring networks. The proposed sequential source characterization and monitoring network design methodology shows efficiency in identifying the unknown source characteristics. The designed monitoring network achieves comparable efficiency and accuracy utilizing much smaller number of monitoring locations as compared to a more ideal scenario where concentration measurements from a very large number of widespread monitoring wells are available. The proposed methodology is potentially useful for efficient characterization of unknown contaminant sources in a complex contaminated aquifer site, where very little initial concentration measurement data are available. The illustrative application of the methodology to a real-life contaminated aquifer site demonstrates the capability and efficiency of the proposed methodology.

Study on an Audio and Video Network Monitoring System for Weather Modification Operation

An audio and video network monitoring system for weather modification operation transmitting information by 3G, ADSL and Internet has been developed and applied in weather modification operation of Tai＇an City. The all-in-one machine of 3G audio and video network highly integrates all front-end devices used for audio and video collection, communication, power supply and information storage, and has advantages of wireless video transmission, clear two-way voice intercom with the command center, waterproof and dustproof function, simple operation, good portability, and long working hours. Compression code of the system is transmitted by dynamic bandwidth, and compression rate varies from 32 kbps to 4 Mbps under different network conditions. This system has forwarding mode, that is, monitoring information from each front-end monitoring point is trans- mitted to the server of the command center by 3G/ADSL, and the server codes＇and decodes again, then beck-end users call images from the serv- er, which can address 3G network stoppage caused by many users calling front-end video at the same time. In addition, the system has been ap- plied in surface weather modification operation of Tai＇an City, and has made a great contribution to transmitting operation orders in real time, monitoring, standardizing and recording operating process, and improving operating safety.

APPLICATION OF SEPARABILITY ORITERION IN DESIGN OF DEFORMATION MONITORING NETWORKS

A monitoring scheme must be so designed that several possible mod-els can be efficiently separated in the stage of analysis of deformation measure-ments.Based on the concept of separability developed by Chen and Chrzanowski,a methodology for the design of monitoring schemes has been developed by the au-thors.In the method a computer simulation technique is employed,into whichsome rules have been elaborated allowing minimal human intervention.In this pa-per the criterion is first presented and the design technique using the step one up-dating procedure is discussed.Finally,design of a simulated monitoring networkis made as a demonstrating example.

Design of Building Monitoring Systems Based on Wireless Sensor Networks

Wireless Sensor Network provides a potential technique for monitoring the indoor environment. This paper presents a Building Monitoring system based on Wireless Sensor Networks. A clustering-based network specified for building monitoring is proposed, which is inspired by LEACH (Low Energy Adaptive Cluster Hierarchy) method. Further, two key ideas are used to implement the clustering-based network. First, the configuration module of building management software is used to conduct all nodes in a room forming a local cluster. This cluster formation method does not consume node energy. Second, because cluster-heads cannot directly transmit packets to the sink node due to limited wireless communication range, the cluster-head communications are represented by a multi-hop tree rooted at the sink node. The experiment has been made to demonstrate the feasibility of the proposed results.

Discussion on establishing monitoring networks for temperature fields of shallow thermal energy in Shandong, China

In the recent decade, the construction projects related to shallow geothermal energy engineering have undergone rapid development in Shandong Province. The predominant type of these developments and applications was heat exchange through buried tubes and the main targets were residential and office buildings. However, an overwhelming majority of the completed geothermal heat pump projects lacked monitoring devices so that they were unable to comprehensively reflect the background values for the geothermal fields within the province and few researches were conducted on their influence on the geological environment. In this paper, locations for monitoring shallow geothermal energy and their validity of the monitoring point deployment were studied in view of the development and application status as well as geological background conditions of various projects located in multiple cities providing data support for analyzing the fluctuation trend and influence of large-scale shallow geothermal energy applications on the shallow geothermal and the feasibility and parameter designs of newly built systems in Shandong Province in the future.

Detection Situation and Improvement of Lightning Monitoring Network in Guizhou Province

Based on lightning location data of lightning monitoring network in Guizhou Province in recent eight years,the effective detection radius of a station and the effective detection range of lightning monitoring network in Guizhou Province were analyzed. The results show that the effective detection radius of a lightning monitoring sub-station in Guizhou Province is 160 km; some counties in the southwest,northwest and northeast of Guizhou were not detected. To improve the detector efficiency of lightning monitoring network in Guizhou Province,it is suggested that nine sub-stations should be built in Weining,Shuicheng,Qinglong,Pingtang,Rongjiang,Yuping,Songtao,Tongren and Renhuai,so that the effective detection efficiency will reach more than 95%.