Wettability balance method was used to investigate the wetting performance of Sn Cu Ni-x Eu on Cu substrate, and the mechanical properties and the fracture morphology were studied.The results indicated that the additi...Wettability balance method was used to investigate the wetting performance of Sn Cu Ni-x Eu on Cu substrate, and the mechanical properties and the fracture morphology were studied.The results indicated that the addition of Eu could enhance the properties of solder and solder joints, with the increase of Eu content, tendency of first increase and then decrease could be found in the wetting time, wetting force and the mechanical properties of Sn Cu Ni-x Eu, and the optimal content was 0.039%.For Sn Cu Ni-0.039 Eu solder joints, the optimum mechanical properties could be found, and the amplitude increased was 20%, with the observation of the fracture morphology, it was found that small dimples could be seen, the toughness fracture for Sn Cu Ni and mixture fracture for Sn Cu Ni-0.039 Eu could be demonstrated.And thermal fatigue behavior of Sn Cu Ni solder joints could be enhanced obviously with the 0.039%Eu addition.展开更多
Similar diffusion bonding of 1Cr11Ni2W2MoV stainless steel was conducted at different bonding tem- peratures. The interface characteristics and mechanical properties of joints were examined, and the evolution of inter...Similar diffusion bonding of 1Cr11Ni2W2MoV stainless steel was conducted at different bonding tem- peratures. The interface characteristics and mechanical properties of joints were examined, and the evolution of interracial void morphology was analyzed in detail The results showed that there were four typical interfacial void shapes generating sequentially： the large scraggly voids, penny-shaped voids, ellipse voids and rounded voids. The variation of interracial void shape was dominated by surface diffusion, while the reduction of void volume was ascribed to the combined effects of plastic flow of materials around voids, interface diffusion and volume diffusion. Owing to the elimination of void from the bonding interface, the sound joint obtained could exhibit nearly full interracial contact, and present excellent mechanical properties, in which the microhardness and shear strength of joint matched those of base material.展开更多
基金Project supported by Natural Science Foundation of the Higher Education Institutions of Jiangsu Province(12KJB460005)
文摘Wettability balance method was used to investigate the wetting performance of Sn Cu Ni-x Eu on Cu substrate, and the mechanical properties and the fracture morphology were studied.The results indicated that the addition of Eu could enhance the properties of solder and solder joints, with the increase of Eu content, tendency of first increase and then decrease could be found in the wetting time, wetting force and the mechanical properties of Sn Cu Ni-x Eu, and the optimal content was 0.039%.For Sn Cu Ni-0.039 Eu solder joints, the optimum mechanical properties could be found, and the amplitude increased was 20%, with the observation of the fracture morphology, it was found that small dimples could be seen, the toughness fracture for Sn Cu Ni and mixture fracture for Sn Cu Ni-0.039 Eu could be demonstrated.And thermal fatigue behavior of Sn Cu Ni solder joints could be enhanced obviously with the 0.039%Eu addition.
基金supported by the National Natural Science Foundation of China (No. 51505386 and No. 51275416)the China Postdoctoral Science Foundation (No. 2014M562447)the Research Fund of the State Key Laboratory of Solidification Processing (NWPU), China (16-BZ-2015)
文摘Similar diffusion bonding of 1Cr11Ni2W2MoV stainless steel was conducted at different bonding tem- peratures. The interface characteristics and mechanical properties of joints were examined, and the evolution of interracial void morphology was analyzed in detail The results showed that there were four typical interfacial void shapes generating sequentially： the large scraggly voids, penny-shaped voids, ellipse voids and rounded voids. The variation of interracial void shape was dominated by surface diffusion, while the reduction of void volume was ascribed to the combined effects of plastic flow of materials around voids, interface diffusion and volume diffusion. Owing to the elimination of void from the bonding interface, the sound joint obtained could exhibit nearly full interracial contact, and present excellent mechanical properties, in which the microhardness and shear strength of joint matched those of base material.
