Catalogs of ground motion parameters for earthquake-prone regions in Kazakhstan

The catalogs of ground motion parameters for earthquake-prone regions of Kazakhstan used for modeling seismic effects in seismic hazard assessment and microzonation are presented.

COORDINATION OF THE MOTION PARAMETERS WITHIN STEP-BY-STEP INTEGRATION FOR DYNAMIC EQUATION

A method is presented that coordinates the calculation of the displacement, velocity and acceleration of structures within the time-steps of different types of step-by-step integration. The dynamic equation is solved using an energy equation and the calculating data of the original method. The method presented is better than the original method in terms of calculating postulations and is in better conformity with the system's movement. Take the Wilson-θ method as an example. By using the coordination process, the calculation precision has been greatly im proved (reducing the errors by approximately 90% ), and the greater part of overshooting of the calculation result has been eliminated. The study suggests that the mal-coordination of the motion parameters within the time-step is the major factor that contributes to the result errors of step-by-step integration for the dynamic equation.

Three-dimensional motion parameters estimation from stereo image sequences based on infrared reflective markers

In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated previously.The method consists of the following steps:1) the coordinate of several markers and depth map for each stereo pair was determined from the sequences of stereo images by relations of markers' coordinate the correspondence between markers was established,2) the 3D motion parameters of the target was computed based upon the matched markers' coordinate,and 3) translated 3D motion parameters estimation into the problem of least square according to the movement model of the object to be measured.Without using line,curve or corner correspondence,this method can calculate the depth of these markers feature easily and quickly in contrast to traditional approaches.The two CCD cameras work on 200 f/s,and each processing cost time is about 3 ms.It was found that,by using several markers and a large number of stereo images,this method can improve the computational speed,robustness and numerical accuracy of the motion parameters in comparison with traditional methods.The virtual simulation experiment was conducted using synthesized stereo image sequences based on 6-DOF motion platform and the experimental results proved the validity of our approach and showed that the translation and rotation precision is up to 0.1 mm and 0.1°.

3D Motion Parameters Determination Based on Binocular Sequence Images

Exactly capturing three dimensional (3D) motion i nf ormation of an object is an essential and important task in computer vision, and is also one of the most difficult problems. In this paper, a binocular vision s ystem and a method for determining 3D motion parameters of an object from binocu lar sequence images are introduced. The main steps include camera calibration, t he matching of motion and stereo images, 3D feature point correspondences and re solving the motion parameters. Finally, the experimental results of acquiring th e motion parameters of the objects with uniform velocity and acceleration in the straight line based on the real binocular sequence images by the mentioned meth od are presented.

Influence of gas pressure state on the motion parameters of coal-gas flow in the outburst hole

Carried on the one-dimensional analysis to the motion state of coal-gas flow in the outburst hole, and deduced the relational expression between the motion parameters （containing of velocity, flow rate and density etc.） of bursting coal-gas flow and gas pressure in the hole, then pointed out the critical state change of coal-gas flow under different pressure conditions which had the very tremendous influence on both stability and destructiveness of the entire coal and gas outburst system. The mathematical processing and results of one-dimensional flow under the perfect condition are simple and explicit in this paper, which has the certain practical significance.

An investigation on the ground motion parameters and seismic response of underground structures

Peak ground acceleration (PGA), frequency content and time duration are three fundamental parameters of seismic loading. This study focuses on the seismic load frequency and its effect on the underground structures. Eight accelerograms regarding different occurred earthquakes that are scaled to an identical PGA and variation of ground motion parameters with ratio of peak ground velocity (PGV) to PGA, as a parameter related to the load frequency, are considered. Then, concrete lining response of a circular tunnel under various seismic conditions is evaluated analytically. In the next, seismic response of underground structure is assessed numerically using two different time histories. Finally, effects of incident load frequency and frequency ratio on the dynamic damping of geotechnical materials are discussed. Result of analyses show that specific energy of seismic loading with identical PGA is related to the seismic load frequency. Furthermore, incident load frequency and natural frequency of a system have influence on the wave attenuation and dynamic damping of the system.

Ground motion parameters of Shillong plateau: One of the most seismically active zones of northeastern India

Strong ground motion parameters for Shillong plateau of northeastern India are examined. Empirical relations are obtained for main parameters of ground motions as a function of earthquake magnitude, fault type, source depth, velocity characterization of medium and distance. Correlation between ground motion parameters and characteristics of seismogenic zones are established. A new attenuation relation for peak ground acceleration is developed, which predicts higher expected PGA in the region. Parameters of strong motions, particularly the predominant periods and duration of vibrations, depend on the morphology of the studied area. The study measures low estimates of logarithmic width in Shillong plateau. The attenuation relation estimated for pulse width critically indicates increased pulse width dependence on the logarithmic distance which accounts for geometrical spreading and anelastic attenuation.

The Relationship Among Bedrock Seismic Ground Motion Parameters with Different Exceedance Probabilities in the Panxi Area

Based on the calculation of the bedrock effective peak acceleration (EPA) zoning map in the Panxi area, the ratios of EPA with exceedance probabilities of 63%, 5%, 3%, 2% and 1% over 50 years to that of 10% in 50 years are 0.302, 1.30, 1.55, 1.76 and 2.14, respectively. The seismic effect will be conservative and safe if taking this zoning map as the earthquake resistant fortification level and following the relevant rules of the Code for Seismic Design of Buildings (GBJ11 89) to calculate the seismic effect. Furthermore, the main factors that influence the A10/A63 ratios have been found to be the attenuation relationship of seismic ground motion, the division of seismic potential source regions and the seismicity parameters. These achievements are helpful to the spreading and applying of the zoning map.

Evaluation of ground motion parameters and seismic response of reinforced concrete buildings from the Mw 6.9,2011 Sikkim earthquake

The continuous collision of the Eurasian plate and the Indian plate has resulted in several earthquakes in the Himalayan region.The 6.9 Mw 2011 Sikkim earthquake,which caused immense damage to the built environment in Sikkim,was triggered by an intraplate source on the overriding Eurasian plate.Strong ground motions from the earthquake were recorded at stations established by IIT Roorkee as part of the PESMOS program.In this paper,near-field and far-field ground motions from this earthquake were analyzed to evaluate their key characteristics and examine their time-frequency features by employing Fast Fourier Transforms(FFTs)and Continuous Wavelet Transforms(CWTs).A comparison between the ground motion parameters of near-field and far-field seismic waves highlights the distinct characteristics of near-field ground motions.Additionally,the impact of near-field and far-field ground motions on the seismic response of a code-compliant RC building is investigated.The results from the non-linear time history analyses indicate that the roof displacements,drift ratio and strain induced in the frame elements are less than the code-prescribed maximum limits.Further,the demand and capacity levels for the RC frame elements were evaluated to compute the performance ratios.The results indicate that the extensive damage to reinforced concrete buildings in the 2011 Sikkim quake was primarily due to the nonengineered nature of the structures and also due to the non-compliance of the built structures to the seismic design code provisions.

A novel virtual four-ocular stereo vision system based on single camera for measuring insect motion parameters

A novel virtual four-ocular stereo measurement system based on single high speed camera is proposed for measuring double beating wings of a high speed flapping insect. The principle of virtual monocular system consisting of a few planar mirrors and a single high speed camera is introduced. The stereo vision measurement principle based on optic triangulation is explained. The wing kinematics parameters are measured. Results show that this virtual stereo system not only decreases system cost extremely but also is effective to insect motion measurement.

Non-cooperative Space Target Estimation Algorithm Without Prior Information Dependence Based on Temporal Line of Sight Constraint

Under single-satellite observation,the parameter estimation of the boost phase of high-precision space noncooperative targets requires prior information.To improve the accuracy without prior information,we propose a parameter estimation model of the boost phase based on trajectory plane parametric cutting.The use of the plane passing through the geo-center and the cutting sequence line of sight(LOS)generates the trajectory-cutting plane.With the coefficient of the trajectory cutting plane directly used as the parameter to be estimated,a motion parameter estimation model in space non-cooperative targets is established,and the Gauss-Newton iteration method is used to solve the flight parameters.The experimental results show that the estimation algorithm proposed in this paper weakly relies on prior information and has higher estimation accuracy,providing a practical new idea and method for the parameter estimation of space non-cooperative targets under single-satellite warning.

Study on inelastic displacement ratio spectra for near-fault pulse-type ground motions

In displacement-based seismic design, inelastic displacement ratio spectra （IDRS） are particularly useful for estimating the maximum lateral inelastic displacement demand of a nonlinear SDOF system from the maximum elastic displacement demand of its counterpart linear elastic SDOF system. In this study, the characteristics of IDRS for near-fault pulse-type ground motions are investigated based on a great number of earthquake ground motions. The influence of site conditions, ratio of peak ground velocity （PGV） to peak ground acceleration （PGA）, the PGV, and the maximum incremental velocity （MIV） on IDRS are also evaluated. The results indicate that the effect of near-fault ground motions on IDRS are significant only at periods between 0.2 s - 1.5 s, where the amplification can approach 20%. The PGV/PGA ratio has the most significant influence on IDRS among the parameters considered. It is also found that site conditions only slightly affect the IDRS.

Study on the severest real ground motion for seismic design and analysis

How to select the adequate real strong earthquake ground motion for seismic analysis and design of structures is an essential problem in earthquake engineering research and practice. In the paper the concept of the severest design ground motion is proposed and a method is developed for comparing the severity of the recorded strong ground motions. By using this method the severest earthquake ground motions are selected out as seismic inputs to the structures to be designed from a database that consists of more than five thousand significant strong ground motion records collected over the world. The selected severest ground motions are very likely to be able to drive the structures to their critical response and thereby result in the highest damage potential. It is noted that for different structures with different predominant natural periods and at different sites where structures are located the severest design ground motions are usually different. Finally, two examples are illustrated to demonstrate the rationality of the concept and the reliability of the selected design motion.

AIRCRAFT MOTION PARAMETER ESTIMATION VIA MULTIPATH TIME-DELAY USING A SINGLE GROUND-BASED PASSIVE ACOUSTIC SENSOR

The time-frequency analysis of the signal acquired by a single ground-based microphone shows a two-dimensional interference pattern in the time-frequency plane,which is caused by the time delay of the received signal emitted from a low flying aircraft via the direct path and the ground-re-flected path. A model is developed for estimating the motion parameters of an aircraft flying along a straight line at a constant height and with a constant speed. Monte Carlo simulation results and ex-perimental results are presented to validate the model,and an error analysis of the model is presented to verify the effectiveness of the estimation scheme advocated.

Intention Estimation of Adversarial Spatial Target Based on Fuzzy Inference

Estimating the intention of space objects plays an important role in air-craft design,aviation safety,military and otherfields,and is an important refer-ence basis for air situation analysis and command decision-making.This paper studies an intention estimation method based on fuzzy theory,combining prob-ability to calculate the intention between two objects.This method takes a space object as the origin of coordinates,observes the target’s distance,speed,relative heading angle,altitude difference,steering trend and etc.,then introduces the spe-cific calculation methods of these parameters.Through calculation,values are input into the fuzzy inference model,andfinally the action intention of the target is obtained through the fuzzy rule table and historical weighted probability.Ver-ified by simulation experiment,the target intention inferred by this method is roughly the same as the actual behavior of the target,which proves that the meth-od for identifying the target intention is effective.

The Phenomena of Bifurcation and Catastrophe of Large-Scale Horizontal Motion in the Atmosphere under the Effect of Rossby Parameter

The stability question of large-scale horizontal motion in the atmosphere under the effect of Rossby parameter is discussed in this paper by using the qualitative analysis theory of ordinary differential equations. The following aspects are reviewed: The stability of large-scale horizontal motion in the atmosphere accords with the common inertial stability criterion when the effect of Rossby parameter is not considered (Yang, 1983), and that, on the other hand, the motion will bifurcate two times with the variation of absolute vorticity of basic Zephyr flow at the initial position under the effect of Rossby parameter. Furthermore, in the inertial stable region, if the effect of geostrophic deviation at the initial position is considered, the motion will not only bifurcate but also generate a catastrophe.

Some considerations on the physical mea-sure of seismic intensity

The study on seismic intensity can be traced prior to the time that modern seismology was established. In its early stage the seismic intensity was designed to serve as a measure in scaling the severity of earthquake damage to civil engineering and environmental structures. Also the seismic intensity is usually assigned by engineers and seismologists with one or two characteristic parameters of earthquake ground motions to reflect earthquake damage potential so as to be able to serve as an input earthquake load for seismic design of structures. So choosing a proper parameter to reflect the action of seismic intensity is the main objective of the research on physical measure of seismic intensity. However, since various kinds of structures have quite different damage mechanisms, there will exist great differences in damages to different structures located at the same area during the same earthquake. Particularly, in some cases, quite different damages have happened even to the structures of same kind due to many other factors such as different construction materials, different configurations or on the different types of sites where structures located. In addition, the ground motion parameters, which result in damage to structures, are not the single peak value of ground motion. Hence, this paper emphasizes that the research on new physical measure of seismic intensity should not only consider the structural characteristics but also take into account other parameters such as duration, energy of ground motion and so on. In particular, as the physical measures of intensity, different ground motion parameter should be adopted for different structures.

Seismic hazard analysis for engineering sites based on the stochastic finite-fault method

Seismic hazard analyses are mainly performed using either deterministic or probabilistic methods.However,there are still some defects in these statistical model-based approaches for regional seismic risk assessment affected by the near-field of large earthquakes.Therefore,we established a deterministic seismic hazard analysis method that can characterize the entire process of ground motion propagation based on stochastic finite-fault simulation,and we chose the site of the Xiluodu dam to demonstrate the method.This method can characterize earthquake source properties more realistically than other methods and consider factors such as the path and site attenuation of seismic waves.It also has high computational efficiency and is convenient for engineering applications.We first analyzed the complexity of seismogenic structures in the Xiluodu dam site area,and then an evaluation system for ground motion parameters that considers various uncertainties is constructed based on a stochastic finitefault simulation.Finally,we assessed the seismic hazard of the dam site area comprehensively.The proposed method was able to take into account the complexity of the seismogenic structures affecting the dam site and provide multi-level parameter evaluation results corresponding to different risk levels.These results can be used to construct a dam safety assessment system of an earthquake in advance that provides technical support for rapidly and accurately assessing the post-earthquake damage state of a dam,thus determining the influence of an earthquake on dam safety and mitigating the risk of potential secondary disasters.

Enhanced performance of triboelectric mechanical motion sensor via continuous charge supplement and adaptive signal processing

The development of automation industry is inseparable from the progress of sensing technology.As a promising self-powered sensing technology,the durability and stability of triboelectric sensor(TES)have always been inevitable challenges.Herein,a continuous charge supplement(CCS)strategy and an adaptive signal processing(ASP)method are proposed to improve the lifetime and robustness of TES.The CCS uses low friction brushes to increase the surface charge density of the dielectric,ensuring the reliability of sensing.A triboelectric mechanical motion sensor(TMMS)with CCS is designed,and its electrical signal is hardly attenuated after 1.5 million cycles after reasonable parameter optimization,which is unprecedented in linear TESs.After that,the dynamic characteristics of the CCS-TMMS are analyzed with error rates of less than 1%and 2%for displacement and velocity,respectively,and a signal-to-noise ratio of more than 35 dB.Also,the ASP used a signal conditioning circuit for impedance matching and analog-to-digital conversion to achieve a stable output of digital signals,while the integrated design and manufacture of each hardware module is achieved.Finally,an intelligent logistics transmission system(ILTS)capable of wirelessly monitoring multiple motion parameters is developed.This work is expected to contribute to automation industries such as smart factories and unmanned warehousing.

Intensity Retrieved from Public Monitoring Video——Cases from the May 12,2008,Wenchuan Earthquake

Macroseismic investigation is presented with a new potential means of investigation in the "digital age". In this paper we studied several cases in the May 12, 2008, Wenchuan M_S8.0 earthquake with a view to exploring the feasibility of retrieving intensity, or even strong ground motion parameters, from public monitoring video which was originally deployed for security purposes. We used public monitoring video records from 44 sites across the meizoseismal region and its surroundings to estimate the intensity. By using the video from a bank in Dujiangyan, Sichuan Province and making the simple assumption that ground vibration is in the form of a propagating harmonic wave, we estimated that the local ground motion acceleration was 0.14g.