MPC-based Torque Distribution for Planar Motion of Four-wheel Independently Driven Electric Vehicles:Considering Motor Models and Iron Losses

The most critical obstacle for four-wheel independently driven electric vehicles(4WID-EVs)is the driving range.Being the actuators of 4WID-EVs,motors account for its major power consumption.In this sense,by properly distributing torques to minimize the power consumption,the driving range of 4WID-EV can be effectively improved.This paper proposes a model predictive control(MPC)-based torque distribution scheme,which minimizes the power consumption of 4WID-EVs while guaranteeing its tracking performance of planar motions.By incorporating the motor model considering iron losses,the optimal torque distribution can be achieved without an additional torque controller.Also,for this reason,the proposed control scheme is computationally efficient,since the power consumption term to be optimized,which is expressed as the product of the motor voltages and currents,is much simpler than that derived from the efficiency map.With reasonable simplification and linearization,the MPC problem is converted to a quadratic programming problem,which can be solved efficiently.The simulation results in MATLAB and CarSim co-simulation environments demonstrate that the proposed scheme effectively reduces power consumption with guaranteed tracking performance.

Contribution to the Full 3D Finite Element Modelling of a Hybrid Stepping Motor with and without Current in the Coils

The paper presents our contribution to the full 3D finite element modelling of a hybrid stepping motor using COMSOL Multiphysics software. This type of four-phase motor has a permanent magnet interposed between the two identical and coaxial half stators. The calculation of the field with or without current in the windings (respectively with or without permanent magnet) is done using a mixed formulation with strong coupling. In addition, the local high saturation of the ferromagnetic material and the radial and axial components of the magnetic flux are taken into account. The results obtained make it possible to clearly observe, as a function of the intensity of the bus current or the remanent induction, the saturation zones, the lines, the orientations and the magnetic flux densities. 3D finite element modelling provide more accurate numerical data on the magnetic field through multiphysics analysis. This analysis considers the actual operating conditions and leads to the design of an optimized machine structure, with or without current in the windings and/or permanent magnet.

基于Modelica的交流伺服控制系统建模与仿真

永磁同步电机(PMSM)在交流伺服系统中应用十分广泛,其数学模型具有非线性、多变量、强耦合的特点。为提高建模与分析效率,并兼顾PMSM模型在复杂多领域系统中的通用性等问题,提出一种基于Modelica的交流伺服控制系统的建模方法。采用模块化建模与Modelica语言实现了PMSM的非因果建模,在MWORKS平台建立了伺服系统的仿真模型,并在位置控制、速度控制方面测试了3类典型工况。实验表明,所提方法跟随误差小、动态响应快,验证了建模方法和系统模型构建的正确性和合理性,为伺服控制系统和多领域建模与仿真技术的发展提供了新思路。

Simulation Research of Fault Model of Detecting Rotor Dynamic Eccentricity in Brushless DC Motor Based on Motor Current Signature Analysis

基于Ansoft／Maxwell设置动态偏心故障，建立求解电机电感和磁链的有限元模型，通过仿真，证明了将感应电机动态偏心故障的特征频率经过简化后，同样适用于无刷直流电动机。基于Ansoft／Simplorer建立无刷直流电动机系统的仿真模型。在电机稳态运行下，对定子电流进行傅里叶分析，研究并建立基于定子电流监测动态偏心故障的仿真模型：动态偏心故障与特征频率的关系、动态偏心故障程度与特征频率幅值的关系。进而研究了无刷直流电动机稳态运行时转速波动对偏心故障监测的影响。仿真结果表明，转子偏心程度加大，特征频率的幅值增加。

Contact Analysis and Modeling of Standing Wave Linear Ultrasonic Motor

A contact model for describing the contact mechanics between the stator and slider of the standing wave linear ultrasonic motor was presented. The proposed model starts from the assumption that the vibration characteristics of the stator is not affected by the contact process. A modified friction models was used to analyze the contact problems. Firstly, the dynamic normal contact force, interface friction force, and steady-state characteristics were analyzed. Secondly, the influences of the contact layer material, the dynamic characteristics of the stator, and the pre-load on motor performance were simulated. Finally, to validate the contact model, a linear ultrasonic motor based on in-plane modes was used as an example. The corresponding results show that a set of simulation of motor performances based on the proposed contact mechanism is in good agreement with experimental results. This model is helpful to understanding the operation principle of the standing wave linear motor and thus contributes to the design of these types of motor.

Efficiency of Model Induction Motor Using Various Non-Oriented Electrical Steels

The performance of a 3-phase 6-pole 400 W inverter-drive induction motor was investigated using a variety of non-oriented electrical steels for stator core at PWM inverter fundamental wave frequencies of 30 to 300 Hz. There existed an optimum Si content of the material depending on the tooth flux density. Both reduction of material thickness and stress-relief annealing of the stator core improved the motor efficiency. The influence of Si content on the efficiency was small at lower PWM frequencies, while at higher frequencies the motor efficiency increased with increasing Si content. The Cu loss WC increased and the Fe loss Wi counteractiveiy decreasedwith increasing Si content at lower frequencies; while at higher frequencies Wi had dominant effect on the efficiency. Newly developed materials RMA, having lower Fe losses after stress-relief annealing and higher flux densities with lower Si contents, showed motor efficiencies superior to conventional J1S grade materials with comparable Fe losses.

Efficiency of collective myosin Ⅱ motors studied with an elastic coupling power-stroke ratchet model

We proposed a modified ratchet model including power-stroke and elastic coupling to study the efficiency of collective non-processive motors such as myosin Ⅱ in muscle. Our theoretical results are in good agreement with the experimental data. Our study not only reveals that the maximum efficiency depends on elasticity and is independent of transition rates but also indicates that the parameters fitted to fast muscle are different from those fitted to a slow one. The latter may imply that the structure of the fast muscle is different from that of the slow one. The main reason that our model succeeds is that velocity in this model is an independent variable.

Sanye Brand Model Motors

The Sanye Machinery Company, a Shenzhen-based subsidery of the Nanfang Aeronautical Power Machinery Corporation, makes Sanye brand Model motors, well known in the international market. Model magazines published in the United States, Japan and Italy have all introduced the motors and regarded them as an advanced product of Chinese aeronautical technology.

A non-Markov ratchet model of molecular motors：processive movement of single-headed kinesin KIF1A

A fluctuating ratchet model of non-Markov process is presented to describe the processive movement of molecular motors of single-headed kinesin KIF1A, where the fluctuation perturbation to the local potential is introduced and the detailed ATPase pathway of the motor is included. The theoretical results show good quantitative agreement with the previous experimental ones.

Modeling and Simulation of High-Voltage Asynchronous Motor Voltage-Regulator

For starting high-voltage asynchronous motor,the voltage regulator based on current-limiting transformer is presented in the paper. Its mathematical model needs to be established analyzing and designing voltage regulator of high-voltage asynchronous motor. The mathematical model of the current-limiting transformer is deduced based on basic circuit theory. It can be found that a continuous variation reactance can describe the current-limiting transformer during starting process. The two variables functions of current and voltage are transformed into one-variable functions,and thus system control is greatly simplified. The voltage regulator is simulated on the basis. The simulation results show that this model has enough accuracy. Finally, the high-voltage asynchronous motor voltage regulator based on current-limiting transformer is designed and tested on this model.

Research on Ride Comfort Model of Wheel Motor Driving Vehicle Based on Matlab/Simulink

Simulink is a visual simulation tool in MATLAB;?through Simulink software,?to establish a model can reduce the amount of programming workload,?and?improve the efficiency of the establishment of automotive models.?The ride comfort of the vehicle is a measure of the most basic indicators of a car performance.?By establishing a ride comfort model in Matlab/Simulink, the wheel motor electric vehicle mainly affects the smoothness of the car mainly in the following aspects:?pavement, tire, suspension, motor and so on.?Through the establishment of the above model,?we?can effectively study the wheel motor drive electric vehicle ride comfort research.

One-dimensional chain of quantum molecule motors as a mathematical physics model for muscle fibers

A quantum chain model of multiple molecule motors is proposed as a mathematical physics theory for the microscopic modeling of classical force-velocity relation and tension transients in muscle fibers. The proposed model was a quantum many-particle Hamiltonian to predict the force-velocity relation for the slow release of muscle fibers, which has not yet been empirically defined and was much more complicated than the hyperbolic relationships. Using the same Hamiltonian model, a mathematical force-velocity relationship was proposed to explain the tension observed when the muscle was stimulated with an alternative electric current. The discrepancy between input electric frequency and the muscle oscillation frequency could be explained physically by the Doppler effect in this quantum chain model. Further more, quantum physics phenomena were applied to explore the tension time course of cardiac muscle and insect flight muscle. Most of the experimental tension transient curves were found to correspond to the theoretical output of quantum two- and three-level models. Mathematical modeling electric stimulus as photons exciting a quantum three-level particle reproduced most of the tension transient curves of water bug Lethocerus maximus.

基于ESO的PMSM无模型快速超螺旋滑模预测控制

为提高表贴式永磁同步电机(Surface permanent magnet synchronous motor,SPMSM)在参数变化和外部扰动下的鲁棒性,提出一种基于扩张状态观测器的无模型快速超螺旋滑模预测控制方法。首先,建立SPMSM参数摄动时的新型超局部模型。其次,采用改进的超螺旋算法作为辅助控制率设计转速环无模型超螺旋滑模反馈控制器,同时利用复合的扩张扰动观测器估计超局部模型中的未知部分,并通过Lyapunov稳定性理论证明了控制器和观测器的稳定性。电流环应用无差拍电流预测控制策略,结合扩张状态观测器对扰动量进一步估计并进行前馈补偿,使电流环具有更好的动态响应和更小的谐波分量。仿真试验结果表明,所提方法可有效提高系统响应速度,改善SPMSM在发生参数漂移和外部扰动下的暂稳态性能,降低电流总谐波畸变率,提升系统鲁棒性和抗干扰性能。

基于简化有限集模型预测电流控制的五相PMSM统一容错控制

在五相永磁同步电机(permanent-magnet synchronous motor,PMSM)中,有限集模型预测容错控制(finite control set model predictive fault tolerant control,FCS-MPFTC)存在计算量大、电流谐波含量高等问题。因此,该文提出一种简化FCS-MPFTC来实现相开路和短路故障情况下的统一容错控制。首先,将模型预测电流控制的电流代价函数等效转化为电压代价函数,并采用无差拍方法通过电流模型计算出参考电压。然后,基于抑制三次谐波电流为0的原则合成虚拟电压矢量(virtual voltage vector,V^(3));通过重构V^(3)和扇区,以直接获得参考电压矢量对应的最优电压矢量。最后,对传统和简化FCS-MPFTC在开路和短路故障下进行对比实验。结果表明,所提策略能够有效减小故障后计算量、转矩脉动以及电流谐波含量。

Dynamic Modelling of Submersible Pump Based Solar Water-Pumping System with Three-Phase Induction Motor Using MATLAB

The main purpose of this paper is to design and model a water-pumping system using a submersible multi-stage centrifugal pump driven by a three-phase induction motor. The system is intended for pumping water to the surface from a deep well using three power supply systems: a general network, a photo-voltaic (PV) system, and a PV system with a battery bank. These systems are used to compare two three-phase induction motors—namely, a motor with a drive and another one without a drive. The systems dynamic models are simulated in MATLAB/Simulink and the results compared with the manufacturer’s data for validation purposes. The simulation results generally show system dynamics and expected performance over a range of operation.

Localization and Evaluation of Motor Vehicle Emission Simulator (MOVES) Model for Predicting the Emissions of Private Cars:a Case Study of Shenzhen City,China

Motor Vehicle emission simulator(MOVES)model was localized by changing the base emission rates in MySQL database of the model,and using the actual measured data for private cars in Shenzhen City,China.The performances of localized MOVES model and non-localized MOVES model were evaluated by comparing the predicted emission factors to the measured ones.The results showed that by localization of the base emission rates,the prediction accuracy of the localized MOVES model for hydrocarbon(HC)and nitrogen oxides(NO x)was significantly improved.The accuracy of the localized MOVES model simulations in the Opmode increased by 86%,88%and 71%for HC,76%,42%and 72%for NO x on arterial roads,expressways and highways.For carbon monoxide(CO),however,the simulation performance based on the average velocity mode on expressways and highways became poor after localization,with the decrease of 28%and 8%respectively.Overall,by the localization of the base emission rates,the relative errors of the simulated emission factors of HC,CO and NO x of private cars were less than 37%.

低复杂度永磁同步电机三矢量固定开关频率模型预测电流控制策略

针对传统永磁同步电机(permanent magnet synchronous motor,PMSM)三矢量模型预测电流控制(three-vector model predictive current control,TV-MPCC)存在开关频率不固定和计算复杂的问题,提出一种固定开关频率TV-MPCC策略。利用前一周期的零电压矢量和参考电压矢量所在扇区来快速筛选所需最优电压矢量和次优电压矢量,避免了无效枚举计算,从而降低了开关频率和计算复杂度。引入系统d和q轴电流差参数,计算各电压矢量的作用时间,确保电压矢量作用时间恒大于零和开关频率固定。以三相两电平电压型逆变器驱动的表贴式PMSM为被控对象,通过仿真和实验对传统TV-MPCC策略和所提三矢量固定开关频率模型预测电流控制策略进行对比研究,仿真和实验结果表明,所提策略在保证系统稳态和动态性能的基础上,在固定和降低开关频率的同时,降低了计算复杂度。

基于前馈补偿LQR与PID的矿井无轨胶轮车横纵向控制研究

无人驾驶技术是实现无轨胶轮车井下安全、智能、高效运输的重要方案之一,为了提高无人驾驶过程中的轨迹跟踪精度,提出了基于前馈补偿的横向线性二次型调节器(Linear Quadratic Regulator,LQR)与纵向比例积分微分(Proportion Integration Derivative,PID)位移速度调节器相结合的控制策略,实现车辆的横纵向协调控制。通过建立考虑轮胎侧偏特性的2自由度无轨胶轮车动力学模型和跟踪误差模型,并采用井下无轨胶轮车实车参数建立其电机模型,得到车辆的驱动制动输出。利用Carsim和Matlab/Simulink搭建联合仿真环境,分别在井下双车道工况、单车道工况与颠簸路面工况下进行了轨迹跟踪仿真验证。结果表明:在3种工况下车辆轨迹跟踪过程中的最大横向误差仅为5 cm,最大纵向误差仅为10 cm,速度误差控制在1 m/s以内,航向误差范围为±0.1 rad,前轮偏转角变化平稳未出现抖动现象。为验证控制器在井下实际环境下的跟踪性能,使用实验室小车于陕西某井下巷道进行了现场试验验证,结果表明:井下实际巷道下试验结果误差仍在合理范围内,解决了车辆运行过程中的速度和路径的时变问题,反映出该控制器具有较高的精度和较好的稳定性。

一种永磁同步电机模型失配容错控制算法

针对高精度永磁同步电机驱动系统因转动惯量、摩擦系数与磁链参数失配造成其控制精度和稳定性降低的问题,提出了一种基于有限时间收敛扩张状态观测器的无模型滑模容错控制方法。首先,建立了考虑内外不确定性的永磁同步电机转速环超局部模型,并设计了无模型全局积分终端滑模控制器;其次,设计了有限时间收敛扩张状态观测器来降低模型失配带来的影响;最后,通过与其他方法的仿真和实验对比,验证了所提方法能够在不获取精确模型的情况下实现了对多种模型失配与外部扰动工况的容错控制,并提高了电机的控制精度。

伺服阀旋转直驱超声电机机理与特性

针对某旋转直驱式伺服阀对驱动电机小长径比紧凑型结构形式的设计要求,从伺服阀功率级200 Hz动态响应需求出发,设计了一款环形行波型超声电机。分析了超声电机的基本工作原理并建立了超声电机定子转子摩擦传动模型,搭建了超声电机特性测试实验台并进行了转矩-转速测试,实验结果与仿真结果一致,验证了电机设计的合理性。在此基础上,进行了超声电机驱动频率和驱动电压的影响特性分析,结果表明超声电机在49.8 kHz的驱动频率下具有最大的工作效率,驱动电压大于110 V时可以满足伺服阀转速与转矩工作需求,并且在49.8 Hz的驱动频率和110 V驱动电压条件下可以接近最大的工作效率。