Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling scheme...Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.展开更多
A precise detection of the fault feature parameter of motor current is a new research hotspot in the broken rotor bar(BRB) fault diagnosis of induction motors. Discrete Fourier transform(DFT) is the most popular techn...A precise detection of the fault feature parameter of motor current is a new research hotspot in the broken rotor bar(BRB) fault diagnosis of induction motors. Discrete Fourier transform(DFT) is the most popular technique in this field, owing to low computation and easy realization. However, its accuracy is often limited by the data window length, spectral leakage, fence e ect, etc. Therefore, a new detection method based on a global optimization algorithm is proposed. First, a BRB fault current model and a residual error function are designed to transform the fault parameter detection problem into a nonlinear least-square problem. Because this optimization problem has a great number of local optima and needs to be resolved rapidly and accurately, a joint algorithm(called TR-MBPSO) based on a modified bare-bones particle swarm optimization(BPSO) and trust region(TR) is subsequently proposed. In the TR-MBPSO, a reinitialization strategy of inactive particle is introduced to the BPSO to enhance the swarm diversity and global search ability. Meanwhile, the TR is combined with the modified BPSO to improve convergence speed and accuracy. It also includes a global convergence analysis, whose result proves that the TR-MBPSO can converge to the global optimum with the probability of 1. Both simulations and experiments are conducted, and the results indicate that the proposed detection method not only has high accuracy of parameter estimation with short-time data window, e.g., the magnitude and frequency precision of the fault-related components reaches 10^(-4), but also overcomes the impacts of spectral leakage and non-integer-period sampling. The proposed research provides a new BRB detection method, which has enough precision to extract the parameters of the fault feature components.展开更多
As a result of the nonlinear effect, acoustic streaming has been widely used for increasing the transport coefficient or driving a rotor, for example, in resonant cavities and non-contact ultrasonic motors. It has bee...As a result of the nonlinear effect, acoustic streaming has been widely used for increasing the transport coefficient or driving a rotor, for example, in resonant cavities and non-contact ultrasonic motors. It has been demonstrated by experiments that a temperature gradient transverse to the wave propagating direction can significantly increase the velocity of the streaming flows in resonant cavities. To check whether the transverse temperature gradient can also increase the working velocity of acoustic streaming-driven motors, we investigate this issue by numerically solving the hydrodynamic equations. It is found that the velocity of the rotor only weakly depends on the transverse temperature gradient, e.g., even with a temperature difference of 40℃ between the rotor and the stator, the velocity increases only -8.8%.展开更多
The dynamic transfer mechanism of the traveling wave rotary ultrasonic motor rotor-stator’ s contact surface is studied in the paper and the key parts stator and cone flexible rotor of ultrasonic motor are designed.T...The dynamic transfer mechanism of the traveling wave rotary ultrasonic motor rotor-stator’ s contact surface is studied in the paper and the key parts stator and cone flexible rotor of ultrasonic motor are designed.The three-dimensional contact model and finite element model considering the radial sliding between the rotor and the stator are established. The relation between the stator surface particle that amplitude frequency characteristics,resonance speed,radial displacement of ultrasonic motor and the tooth height are analyzed. Mass point radial relative displacement of contact surface between the cone flexible rotor,flexible rotor and the stator are contrasted. The cone flexible rotor is better placed on the surface of the stator tooth through its elastic deformation is interpreted. The cone flexible rotor reduces the radial slip between the stator and the output efficiency of ultrasonic motor is improved. The displacement trajectory of the stator surface is synthesized in a row wave cycle. The method of the stator mass point elliptical motion drives the rotor rotation is verified.展开更多
Current research in broken rotor bar (BRB) fault detection in induction motors is primarily focused on a high-frequency resolution analysis of the stator current. Compared with a discrete Fourier transformation, the...Current research in broken rotor bar (BRB) fault detection in induction motors is primarily focused on a high-frequency resolution analysis of the stator current. Compared with a discrete Fourier transformation, the parametric spectrum estimation technique has a higher frequency accuracy and resolution. However, the existing detection methods based on parametric spectrum estima- tion cannot realize online detection, owing to the large computational cost. To improve the efficiency of BRB fault detection, a new detection method based on the min-norm algorithm and least square estimation is proposed in this paper. First, the stator current is filtered using a band-pass filter and divided into short overlapped data windows. The min-norm algorithm is then applied to determine the fre- quencies of the fundamental and fault characteristic com- ponents with each overlapped data window. Next, based on the frequency values obtained, a model of the fault current signal is constructed. Subsequently, a linear least squares problem solved through singular value decomposition is designed to estimate the amplitudes and phases of the related components. Finally, the proposed method is applied to a simulated current and an actual motor, the results of which indicate that, not only parametric spectrum estimation technique.展开更多
Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on...Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on the quasi transient state of the rotor rectifying circuit is made, and a nonlinear mapping between the equivalent resistance and the duty cycle is deduced. Furthermore, the method for determining the magnitude of the external resistor is introduced.展开更多
供电电压闪变可能对异步电动机转子故障在线检测产生不利影响,导致基于定子电流信号分析(motor current signature analysis,MCSA)的转子故障在线检测方法失效。通过理论分析,揭示供电电压闪变恶化转子故障在线检测性能的机制。提出免...供电电压闪变可能对异步电动机转子故障在线检测产生不利影响,导致基于定子电流信号分析(motor current signature analysis,MCSA)的转子故障在线检测方法失效。通过理论分析,揭示供电电压闪变恶化转子故障在线检测性能的机制。提出免于供电电压闪变影响的异步电动机转子故障在线检测方法,首先,根据转子故障主特征频率分量预判转子健康或故障;继而,根据转子故障独有的辅助特征频率分量进一步确认转子健康或故障。仿真与实验结果证明了该方法的有效性。展开更多
基金This work has been supported by the National Natural Science Foundation of China(51907129)Project Supported by Department of Science and Technology of Liaoning Province(2021-MS-236).
文摘Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.
基金Supported by Fundamental Research Funds for the Central Universities(Grant No.2017XKQY032)
文摘A precise detection of the fault feature parameter of motor current is a new research hotspot in the broken rotor bar(BRB) fault diagnosis of induction motors. Discrete Fourier transform(DFT) is the most popular technique in this field, owing to low computation and easy realization. However, its accuracy is often limited by the data window length, spectral leakage, fence e ect, etc. Therefore, a new detection method based on a global optimization algorithm is proposed. First, a BRB fault current model and a residual error function are designed to transform the fault parameter detection problem into a nonlinear least-square problem. Because this optimization problem has a great number of local optima and needs to be resolved rapidly and accurately, a joint algorithm(called TR-MBPSO) based on a modified bare-bones particle swarm optimization(BPSO) and trust region(TR) is subsequently proposed. In the TR-MBPSO, a reinitialization strategy of inactive particle is introduced to the BPSO to enhance the swarm diversity and global search ability. Meanwhile, the TR is combined with the modified BPSO to improve convergence speed and accuracy. It also includes a global convergence analysis, whose result proves that the TR-MBPSO can converge to the global optimum with the probability of 1. Both simulations and experiments are conducted, and the results indicate that the proposed detection method not only has high accuracy of parameter estimation with short-time data window, e.g., the magnitude and frequency precision of the fault-related components reaches 10^(-4), but also overcomes the impacts of spectral leakage and non-integer-period sampling. The proposed research provides a new BRB detection method, which has enough precision to extract the parameters of the fault feature components.
基金Supported by the National Natural Science Foundation of China under Grant No 10874083
文摘As a result of the nonlinear effect, acoustic streaming has been widely used for increasing the transport coefficient or driving a rotor, for example, in resonant cavities and non-contact ultrasonic motors. It has been demonstrated by experiments that a temperature gradient transverse to the wave propagating direction can significantly increase the velocity of the streaming flows in resonant cavities. To check whether the transverse temperature gradient can also increase the working velocity of acoustic streaming-driven motors, we investigate this issue by numerically solving the hydrodynamic equations. It is found that the velocity of the rotor only weakly depends on the transverse temperature gradient, e.g., even with a temperature difference of 40℃ between the rotor and the stator, the velocity increases only -8.8%.
文摘The dynamic transfer mechanism of the traveling wave rotary ultrasonic motor rotor-stator’ s contact surface is studied in the paper and the key parts stator and cone flexible rotor of ultrasonic motor are designed.The three-dimensional contact model and finite element model considering the radial sliding between the rotor and the stator are established. The relation between the stator surface particle that amplitude frequency characteristics,resonance speed,radial displacement of ultrasonic motor and the tooth height are analyzed. Mass point radial relative displacement of contact surface between the cone flexible rotor,flexible rotor and the stator are contrasted. The cone flexible rotor is better placed on the surface of the stator tooth through its elastic deformation is interpreted. The cone flexible rotor reduces the radial slip between the stator and the output efficiency of ultrasonic motor is improved. The displacement trajectory of the stator surface is synthesized in a row wave cycle. The method of the stator mass point elliptical motion drives the rotor rotation is verified.
基金Supported by National Natural Science Foundation of China(Grant No.51607180)
文摘Current research in broken rotor bar (BRB) fault detection in induction motors is primarily focused on a high-frequency resolution analysis of the stator current. Compared with a discrete Fourier transformation, the parametric spectrum estimation technique has a higher frequency accuracy and resolution. However, the existing detection methods based on parametric spectrum estima- tion cannot realize online detection, owing to the large computational cost. To improve the efficiency of BRB fault detection, a new detection method based on the min-norm algorithm and least square estimation is proposed in this paper. First, the stator current is filtered using a band-pass filter and divided into short overlapped data windows. The min-norm algorithm is then applied to determine the fre- quencies of the fundamental and fault characteristic com- ponents with each overlapped data window. Next, based on the frequency values obtained, a model of the fault current signal is constructed. Subsequently, a linear least squares problem solved through singular value decomposition is designed to estimate the amplitudes and phases of the related components. Finally, the proposed method is applied to a simulated current and an actual motor, the results of which indicate that, not only parametric spectrum estimation technique.
文摘Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on the quasi transient state of the rotor rectifying circuit is made, and a nonlinear mapping between the equivalent resistance and the duty cycle is deduced. Furthermore, the method for determining the magnitude of the external resistor is introduced.
文摘供电电压闪变可能对异步电动机转子故障在线检测产生不利影响,导致基于定子电流信号分析(motor current signature analysis,MCSA)的转子故障在线检测方法失效。通过理论分析,揭示供电电压闪变恶化转子故障在线检测性能的机制。提出免于供电电压闪变影响的异步电动机转子故障在线检测方法,首先,根据转子故障主特征频率分量预判转子健康或故障;继而,根据转子故障独有的辅助特征频率分量进一步确认转子健康或故障。仿真与实验结果证明了该方法的有效性。