基于Multi-Agent的无人机集群体系自主作战系统设计

针对无人集群自主作战体系设计中的关键问题,提出基于Multi-Agent的无人集群自主作战系统设计方法。建立无人集群各节点的Agent模型及其推演规则;对于仿真系统模块化和通用化的需求,设计系统互操作式接口和无人集群自主作战的交互关系;开展无人集群系统仿真推演验证。仿真结果表明,所提设计方案不仅能够有效开展并完成自主作战网络生成-集群演化-效能评估的全过程动态演示验证,而且能够通过重复随机试验进一步评估无人集群的协同作战效能,最后总结了集群协同作战的策略和经验。

联合物理层与MAC层的multi-TRP上行重叠传输处理机制

针对非理想回程下现有协议难以有效处理多传输接收节点(multi-TRP)场景中多定时提前(multi-TA)导致的严重上行链路(UL)重叠传输问题,联合改进物理层复用技术和介质访问控制(MAC)令牌桶技术,提出了一种新型的UL重叠传输处理机制。该新型机制通过改进物理层重叠信道识别流程、复用要求及复用规则,将物理层复用信息与重叠信息反馈至MAC层,并对MAC层令牌桶技术进行优化。通过仿真实验对所提机制与现有协议机制进行对比,结果表明,在逻辑时隙不可重叠和可重叠2种情形下,物理上行控制信道(PUCCH)实际复用数量性能平均提升了57.58%和49.40%,物理上行共享信道(PUSCH)实际可用资源数量性能平均提升了12.09%和26.03%;优先级最高逻辑信道实际占用资源数量性能平均提升了33.33%和45.48%。

基于Multi-Agent的水电站变压器故障诊断系统

为了精准、快速完成水电站变压器的故障诊断,设计基于Multi-Agent的水电站变压器故障诊断系统。变压器状态监控agent将检测到的变压器故障信息发送给系统管理agent,系统管理agent通过通信agent将变压器故障信息发送给变压器故障诊断agent,变压器故障诊断agent利用小波变换方法提取变压器故障特征,并将其作为IFOA-SVM模型输入,完成变压器故障分类后,获取变压器故障诊断结果,该结果通过通信agent显示给用户。实验表明,该系统可有效诊断变压器故障诊断,诊断成功率受系统故障信息丢失率的影响较小,诊断耗时、耗能小,并具有较高故障诊断成功率。

Multi Location Field Evaluation of BC1F2 Sorghum Populations for Striga Resistance in Niger

In Niger, a landlocked country, sorghum is the second staple food cultivated over the country by smallholder farmer. The crop is important for human and animal consumption. Despite its importance, the crop is affected by biotic and abiotic constraints. Among those constraints, striga has a high impact on yield. In fact, to survive, farmers are growing their local preferred sorghum varieties wish is highly sensible to the weed. Striga management is a challenge that requires a permanent solution. In addition, the development of high-yielding Striga resistant genotypes will be appreciated by farmers. The development of striga resistance will be based on the breeding population performances under farmer’s diverse environmental conditions adaptation. The main objective of this study is to evaluate two breeding populations for striga resistance in two different environments at Boulke and Dibissou in Tahoua region, to identify the early and high-yielding striga tolerant genotypes under natural infestation.

A Robust Approach for Multi Classification-Based Intrusion Detection through Stacking Deep Learning Models

Intrusion detection is a predominant task that monitors and protects the network infrastructure.Therefore,many datasets have been published and investigated by researchers to analyze and understand the problem of intrusion prediction and detection.In particular,the Network Security Laboratory-Knowledge Discovery in Databases(NSL-KDD)is an extensively used benchmark dataset for evaluating intrusion detection systems(IDSs)as it incorporates various network traffic attacks.It is worth mentioning that a large number of studies have tackled the problem of intrusion detection using machine learning models,but the performance of these models often decreases when evaluated on new attacks.This has led to the utilization of deep learning techniques,which have showcased significant potential for processing large datasets and therefore improving detection accuracy.For that reason,this paper focuses on the role of stacking deep learning models,including convolution neural network(CNN)and deep neural network(DNN)for improving the intrusion detection rate of the NSL-KDD dataset.Each base model is trained on the NSL-KDD dataset to extract significant features.Once the base models have been trained,the stacking process proceeds to the second stage,where a simple meta-model has been trained on the predictions generated from the proposed base models.The combination of the predictions allows the meta-model to distinguish different classes of attacks and increase the detection rate.Our experimental evaluations using the NSL-KDD dataset have shown the efficacy of stacking deep learning models for intrusion detection.The performance of the ensemble of base models,combined with the meta-model,exceeds the performance of individual models.Our stacking model has attained an accuracy of 99%and an average F1-score of 93%for the multi-classification scenario.Besides,the training time of the proposed ensemble model is lower than the training time of benchmark techniques,demonstrating its efficiency and robustness.

Improving Multiple Sclerosis Disease Prediction Using Hybrid Deep Learning Model

Myelin damage and a wide range of symptoms are caused by the immune system targeting the central nervous system in Multiple Sclerosis(MS),a chronic autoimmune neurological condition.It disrupts signals between the brain and body,causing symptoms including tiredness,muscle weakness,and difficulty with memory and balance.Traditional methods for detecting MS are less precise and time-consuming,which is a major gap in addressing this problem.This gap has motivated the investigation of new methods to improve MS detection consistency and accuracy.This paper proposed a novel approach named FAD consisting of Deep Neural Network(DNN)fused with an Artificial Neural Network(ANN)to detect MS with more efficiency and accuracy,utilizing regularization and combat over-fitting.We use gene expression data for MS research in the GEO GSE17048 dataset.The dataset is preprocessed by performing encoding,standardization using min-max-scaler,and feature selection using Recursive Feature Elimination with Cross-Validation(RFECV)to optimize and refine the dataset.Meanwhile,for experimenting with the dataset,another deep-learning hybrid model is integrated with different ML models,including Random Forest(RF),Gradient Boosting(GB),XGBoost(XGB),K-Nearest Neighbors(KNN)and Decision Tree(DT).Results reveal that FAD performed exceptionally well on the dataset,which was evident with an accuracy of 96.55%and an F1-score of 96.71%.The use of the proposed FAD approach helps in achieving remarkable results with better accuracy than previous studies.

Mutual information oriented deep skill chaining for multi‐agent reinforcement learning

Multi‐agent reinforcement learning relies on reward signals to guide the policy networks of individual agents.However,in high‐dimensional continuous spaces,the non‐stationary environment can provide outdated experiences that hinder convergence,resulting in ineffective training performance for multi‐agent systems.To tackle this issue,a novel reinforcement learning scheme,Mutual Information Oriented Deep Skill Chaining(MioDSC),is proposed that generates an optimised cooperative policy by incorporating intrinsic rewards based on mutual information to improve exploration efficiency.These rewards encourage agents to diversify their learning process by engaging in actions that increase the mutual information between their actions and the environment state.In addition,MioDSC can generate cooperative policies using the options framework,allowing agents to learn and reuse complex action sequences and accelerating the convergence speed of multi‐agent learning.MioDSC was evaluated in the multi‐agent particle environment and the StarCraft multi‐agent challenge at varying difficulty levels.The experimental results demonstrate that MioDSC outperforms state‐of‐the‐art methods and is robust across various multi‐agent system tasks with high stability.

Multi-scale data joint inversion of minerals and porosity in altered igneous reservoirs—A case study in the South China Sea

There are abundant igneous gas reservoirs in the South China Sea with significant value of research,and lithology classification,mineral analysis and porosity inversion are important links in reservoir evaluation.However,affected by the diverse lithology,complicated mineral and widespread alteration,conventional logging lithology classification and mineral inversion become considerably difficult.At the same time,owing to the limitation of the wireline log response equation,the quantity and accuracy of minerals can hardly meet the exploration requirements of igneous formations.To overcome those issues,this study takes the South China Sea as an example,and combines multi-scale data such as micro rock slices,petrophysical experiments,wireline log and element cutting log to establish a set of joint inversion methods for minerals and porosity of altered igneous rocks.Specifically,we define the lithology and mineral characteristics through core slices and mineral data,and establish an igneous multi-mineral volumetric model.Then we determine element cutting log correction method based on core element data,and combine wireline log and corrected element cutting log to perform the lithology classification and joint inversion of minerals and porosity.However,it is always difficult to determine the elemental eigenvalues of different minerals in inversion.This paper uses multiple linear regression methods to solve this problem.Finally,an integrated inversion technique for altered igneous formations was developed.The results show that the corrected element cutting log are in good agreement with the core element data,and the mineral and porosity results obtained from the joint inversion based on the wireline log and corrected element cutting log are also in good agreement with the core data from X-ray diffraction.The results demonstrate that the inversion technique is applicable and this study provides a new direction for the mineral inversion research of altered igneous formations.

Improved Scatter Search Algorithm for Multi-skilled Personnel Scheduling of Ship Block Painting

This paper focuses on the optimization method for multi-skilled painting personnel scheduling.The budget working time analysis is carried out considering the influence of operating area,difficulty of spraying area,multi-skilled workers,and worker’s efficiency,then a mathematical model is established to minimize the completion time. The constraints of task priority,paint preparation,pump management,and neighbor avoidance in the ship block painting production are considered. Based on this model,an improved scatter search(ISS)algorithm is designed,and the hybrid approximate dynamic programming(ADP)algorithm is used to improve search efficiency. In addition,the two solution combination methods of path-relinking and task sequence combination are used to enhance the search breadth and depth. The numerical experimental results show that ISS has a significant advantage in solving efficiency compared with the solver in small scale instances;Compared with the scatter search algorithm and genetic algorithm,ISS can stably improve the solution quality. Verified by the production example,ISS effectively shortens the total completion time of the production,which is suitable for scheduling problems in the actual painting production of the shipyard.

Integration of Multiple Spectral Data via a Logistic Regression Algorithm for Detection of Crop Residue Burned Areas:A Case Study of Songnen Plain,Northeast China

The burning of crop residues in fields is a significant global biomass burning activity which is a key element of the terrestrial carbon cycle,and an important source of atmospheric trace gasses and aerosols.Accurate estimation of cropland burned area is both crucial and challenging,especially for the small and fragmented burned scars in China.Here we developed an automated burned area mapping algorithm that was implemented using Sentinel-2 Multi Spectral Instrument(MSI)data and its effectiveness was tested taking Songnen Plain,Northeast China as a case using satellite image of 2020.We employed a logistic regression method for integrating multiple spectral data into a synthetic indicator,and compared the results with manually interpreted burned area reference maps and the Moderate-Resolution Imaging Spectroradiometer(MODIS)MCD64A1 burned area product.The overall accuracy of the single variable logistic regression was 77.38%to 86.90%and 73.47%to 97.14%for the 52TCQ and 51TYM cases,respectively.In comparison,the accuracy of the burned area map was improved to 87.14%and 98.33%for the 52TCQ and 51TYM cases,respectively by multiple variable logistic regression of Sentind-2 images.The balance of omission error and commission error was also improved.The integration of multiple spectral data combined with a logistic regression method proves to be effective for burned area detection,offering a highly automated process with an automatic threshold determination mechanism.This method exhibits excellent extensibility and flexibility taking the image tile as the operating unit.It is suitable for burned area detection at a regional scale and can also be implemented with other satellite data.

Contribution of Imagery in the Diagnosis of Multisystemic Sarcoidosis in the Service Radiology Department of the Mother and Child Hospital “Le Luxembourg” in Bamako: A Case Report

The aim of this study was to report a case of multi-visceral sarcoidosis at the Mother-Child Hospital Center (CHME) “Le Luxembourg” in Bamako, Mali. Observation: This is a patient aged 62 at the time of consultation, a housewife, residing in the Banconi district, who was referred to us for thoracic-abdominopelvic imaging for chronic liver disease. After several diagnostic errors, the thoracic-abdominopelvic CT scan and liver MRI performed in our center showed, at the thoracoabdominal level, bilateral diffuse pulmonary micronodules and bilateral mediastinal-hilar lymphadenopathy;on the abdominal level, a dysmorphic liver with plaques of steatosis and a granular appearance of the liver parenchyma without periportal fibrosis. These imaging data combined with those from the liver nodule biopsy and biology confirmed the diagnosis of sarcoidosis type II. Treatment with corticosteroids gave satisfactory results and the patient recovered after 18 months. Clinical and CT monitoring 2 years from the start of the disease and 2 months from the end of treatment showed complete resolution of the lesions. Conclusion: The multi-visceral location of sarcoidosis is an entity whose diagnosis remains difficult;diagnostic and interventional imaging has an important place in its management.

Incidence, risk factors and clinical outcome of multidrug-resistant organisms after heart transplantation

BACKGROUND Transplant recipients commonly harbor multidrug-resistant organisms(MDROs),as a result of frequent hospital admissions and increased exposure to antimi-crobials and invasive procedures.AIM To investigate the impact of patient demographic and clinical characteristics on MDRO acquisition,as well as the impact of MDRO acquisition on intensive care unit(ICU)and hospital length of stay,and on ICU mortality and 1-year mortality post heart transplantation.METHODS This retrospective cohort study analyzed 98 consecutive heart transplant patients over a ten-year period(2013-2022)in a single transplantation center.Data was collected regarding MDROs commonly encountered in critical care.RESULTS Among the 98 transplanted patients(70%male),about a third(32%)acquired or already harbored MDROs upon transplantation(MDRO group),while two thirds did not(MDRO-free group).The prevalent MDROs were Acinetobacter baumannii(14%),Pseudomonas aeruginosa(12%)and Klebsiella pneumoniae(11%).Compared to MDRO-free patients,the MDRO group was characterized by higher body mass index(P=0.002),higher rates of renal failure(P=0.017),primary graft dysfunction(10%vs 4.5%,P=0.001),surgical re-exploration(34%vs 14%,P=0.017),mechanical circulatory support(47%vs 26%P=0.037)and renal replacement therapy(28%vs 9%,P=0.014),as well as longer extracorporeal circulation time(median 210 vs 161 min,P=0.003).The median length of stay was longer in the MDRO group,namely ICU stay was 16 vs 9 d in the MDRO-free group(P=0.001),and hospital stay was 38 vs 28 d(P=0.006),while 1-year mortality was higher(28%vs 7.6%,log-rank-χ2:7.34).CONCLUSION Following heart transplantation,a predominance of Gram-negative MDROs was noted.MDRO acquisition was associated with higher complication rates,prolonged ICU and total hospital stay,and higher post-transplantation mortality.

Research on fault time prediction method for high speed rail BTM unit based on multi method interactive validation

The Balise Transmission Module(BTM)unit of the on-board train control system is a crucial component.Due to its unique installation position and complex environment,this unit has a higher fault rate within the on-board train control system.To conduct fault prediction for the BTM unit based on actual fault data,this study proposes a prediction method combining reliability statistics and machine learning,and achieves the fusion of prediction results from different dimensions through multi-method interactive validation.Firstly,a method for predicting equipment fault time targeting batch equipment is introduced.This method utilizes reliability statistics to construct a model of the remaining faultless operating time distribution considering uncertainty,thereby predicting the remaining faultless operating probability of the BTM unit.Secondly,considering the complexity of the BTM unit’s fault mechanism,the small sample size of fault cases,and the potential presence of multiple fault features in fault text records,an individual-oriented fault prediction method based on Bayesian-optimized Gradient Boosting Regression Tree(Bayes-GBRT)is proposed.This method achieves better prediction results compared to linear regression algorithms and random forest regression algorithms,with an average absolute error of only 0.224 years for predicting the fault time of this type of equipment.Finally,a multi-method interactive validation approach is proposed,enabling the fusion and validation of multi-dimensional results.The results indicate that the predicted fault time and the actual fault time conform to a log-normal distribution,and the parameter estimation results are basically consistent,verifying the accuracy and effectiveness of the prediction results.The above research findings can provide technical support for the maintenance and modification of BTM units,effectively reducing maintenance costs and ensuring the safe operation of high-speed railway,thus having practical engineering value for preventive maintenance.

GIS-Based Multi-Criteria Decision Analysis (MCDA) and Analytical Hierarchy Process (AHP) Techniques to Derive Flood Risks Management on Rice Productivity in Gishari Marshland

Floods are phenomenon with significant socio-economic implications mainly for human loss, agriculture, livestock, soil loss and land degradation, for which many researchers try to identify the most appropriate methodologies by analyzing their temporal and spatial development. This study therefore attempts to employ the GIS-based multi-criteria decision analysis and analytical hierarchy process techniques to derive the flood risks management on rice productivity in the Gishari Agricultural Marshland in Rwamagana district, Rwanda. Here, six influencing potential factors to flooding, including river slope, soil texture, Land Use Land Cover through Land Sat 8, rainfall, river distance and Digital Elevation Model are considered for the delineation of flood risk zones. Data acquisition like Landsat 8 images, DEM, land use land cover, slope, and soil class in the study area were considered. Results showed that if the DEM is outdated or inaccurate due to changes in the terrain, such as construction, excavation, or erosion, the predicted flood patterns might not reflect the actual water flow. This could result unexpected flood extents and depths, potentially inundating rice fields that were not previously at risk and this, expectedly explained that the increase 1 m in elevation would reduce the rice productivity by 0.17% due to unplanned flood risks in marshland. It was found that the change in rainfall distribution in Gishari agricultural marshland would also decrease the rice productivity by 0.0018%, which is a sign that rainfall is a major factor of flooding in rice scheme. Rainfall distribution plays a crucial role in flooding analysis and can directly impact rice productivity. Oppositely, another causal factor was Land Use Land Cover (LULC), where the Multivariate Logistic Regression Model Analysis findings showed that the increase of one unit in Land Use Land Cover would increase rice productivity by 0.17% of the total rice productivity from the Gishari Agricultural Marshland. Based on findings from these techniques, the Gishari Agricultural Marshlands having steeped land with grassland is classified into five classes of flooding namely very low, low, moderate, high, and very high which include 430%, 361%, 292%, 223%, and 154%. Government of Rwanda and other implementing agencies and major key actors have to contribute on soil and water conservation strategies to reduce the runoff and soil erosion as major contributors of flooding.

基于Multi-WHFPN与SimAM注意力机制的版面分割

作为OCR的预处理工作,版面分割技术越来越受到学术界和工业界重视。针对版面分割中遇到的检测速度慢、目标区域边界不准确以及细小目标易遗漏等问题,提出了YOLOv7-MSY模型。此模型首先借鉴残差连接思想,提出了Multi-WHFPN网络结构。它采用可训练的权重参数,突出特征融合过程中特征重要性,并添加了小目标检测头,从而提升对小目标的检测性能;其次,引入SimAM注意力机制,可以在不增加额外参数的基础上在3D维度评估特征权重,以增强重要特征,抑制无效特征;最后,使用YEIOU来代替原模型中的定位损失函数,提升了模型的收敛速度与回归精度。在江苏省档案馆提供的数据集上进行实验对比,YOLOv7-MSY对目标区域边界检测更加敏感,对细小目标的检测效果更好。YOLOv7-MSY的mAP@.5达到了0.871,相较于原YOLOv7模型提高了7.84%。该模型的版面分割的效果优于其他类型的版面分割算法,具有良好的泛化性能,并且版面分割速度处于较高水平。

Comprehensive early warning of rock burst utilizing microseismic multi-parameter indices

Rock bursts have become one of the most severe risks in underground coal mining and its early warning is an important component in the safety management. Microseismic(MS) monitoring is considered potentially as a powerful tool for the early warning of rock burst. In this study, an MS multi-parameter index system was established and the critical values of each index were estimated based on the normalized multi-information warning model of coal-rock dynamic failure. This index system includes bursting strain energy(BSE) index, time-space-magnitude independent information(TSMII) indices and timespace-magnitude compound information(TSMCI) indices. On the basis of this multi-parameter index system, a comprehensive analysis was conducted via introducing the R-value scoring method to calculate the weights of each index. To calibrate the multi-parameter index system and the associated comprehensive analysis, the weights of each index were first confirmed using historical MS data occurred in LW402102 of Hujiahe Coal Mine(China) over a period of four months. This calibrated comprehensive analysis of MS multi-parameter index system was then applied to pre-warn the occurrence of a subsequent rock burst incident in LW 402103. The results demonstrate that this multi-parameter index system combined with the comprehensive analysis are capable of quantitatively pre-warning rock burst risk.

Multi-parameter gene expression profiling of peripheral blood for early detection of hepatocellular carcinoma

AIM In our previous study, we have built a nine-gene(GPC3, HGF, ANXA1, FOS, SPAG9, HSPA1 B, CXCR4, PFN1, and CALR) expression detection system based on the Ge XP system. Based on peripheral blood and Ge XP, we aimed to analyze the results of genes expression by different multi-parameter analysis methods and build a diagnostic model to classify hepatocellular carcinoma(HCC) patients and healthy people.METHODS Logistic regression analysis, discriminant analysis, classification tree analysis, and artificial neural network were used for the multi-parameter gene expression analysis method. One hundred and three patients with early HCC and 54 age-matched healthy normal controls were used to build a diagnostic model. Fiftytwo patients with early HCC and 34 healthy people were used for validation. The area under the curve, sensitivity, and specificity were used as diagnostic indicators.RESULTS Artificial neural network of the total nine genes had the best diagnostic value, and the AUC, sensitivity, and specificity were 0.943, 98%, and 85%, respectively. At last, 52 HCC patients and 34 healthy normal controls were used for validation. The sensitivity and specificity were 96% and 86%, respectively.CONCLUSION Multi-parameter analysis methods may increase the diagnostic value compared to single factor analysis and they may be a trend of the clinical diagnosis in the future.

COMSOL Multiphysics在锂离子电池中的应用

作为一种具有前景的能量存储系统,锂离子电池需要进一步提高能量密度、功率密度、可靠性和循环稳定性,以满足不断增长的大型能源存储、电动汽车和便携式电子设备需求。当前对锂离子电池的实验研究仍然面临多个挑战,这些挑战包括电解液的导电性和安全性、高能量负极的沉积-剥离机制的优化、高能量正极的循环电压和容量维持、高电流条件下的界面极化和容量释放,以及在极端电流-温度-针刺条件下的热失控管理等问题。这些问题涉及到电-化-力-热等多个场的耦合作用,需要进行协同优化处理。COMSOL Multiphysics提供了一种可行的工具,通过求解多物理场耦合的连续方程,能够同时考虑载流子浓度、电流密度、电-化学势、温度、应力/应变和几何形态等综合信息的演化。本文概述了该工具在锂离子电池的电解液、负极和正极设计等方面的研究,并聚焦于多场耦合对电池性能的综合影响、多场耦合模拟方法以及理论模拟与实验表征的结合。最后,本文对理论与实验联合研究中的多场和多尺度问题进行了展望。

Study on Environmental Multi-parameter Sensor Based on MEMS

A new membrane type Al_2O_3 micromachining material is used.We develop an environmental multi-parameter detection micro-system,which implements the detection to temperature,humidity,wind speed,and CO.The test results illustrate that the heat-release unit in micro-system intercross greatly affects other sensing units on the temperature.We study the method of etching process,which formed cavity to reduce the heat exchange efficiency and decrease temperature intercross effect.

A STUDY OF A FULLY COUPLED TWO-PARAMETER SYSTEM OF SEQUENTIAL FRACTIONAL INTEGRO-DIFFERENTIAL EQUATIONS WITH NONLOCAL INTEGRO-MULTIPOINT BOUNDARY CONDITIONS

In this article, we discuss the existence and uniqueness of solutions for a coupled two-parameter system of sequential fractional integro-differential equations supplemented with nonlocal integro-multipoint boundary conditions. The standard tools of the fixed-point theory are employed to obtain the main results. We emphasize that our results are not only new in the given configuration, but also correspond to several new special cases for specific values of the parameters involved in the problem at hand.