The automatic positioning control of mooring system for deepwater semi-submersible platform has become a key issue in the research and development field of deep-sea resources. The Dual-Stage Actuator (DSA) proposed in...The automatic positioning control of mooring system for deepwater semi-submersible platform has become a key issue in the research and development field of deep-sea resources. The Dual-Stage Actuator (DSA) proposed in this paper can replace the single actuator to achieve the high speed and high precision positioning by cooperative control. The relative model and control algorithm of motion trajectory (CAMT) are designed and validated, which proves that the method proposed in this paper is effective.展开更多
煤矿掘进巷道锚护位置的精准识别与定位是钻锚机器人实现智能永久支护亟需突破的关键技术。笔者提出一种基于视觉图像与激光点云融合的巷道锚护孔位智能识别定位方法,包括图像目标识别、点云图像特征融合和定位坐标提取3个步骤:①针对...煤矿掘进巷道锚护位置的精准识别与定位是钻锚机器人实现智能永久支护亟需突破的关键技术。笔者提出一种基于视觉图像与激光点云融合的巷道锚护孔位智能识别定位方法,包括图像目标识别、点云图像特征融合和定位坐标提取3个步骤:①针对煤矿井下低照度、水雾和粉尘等环境因素导致的锚孔轮廓成像模糊的问题,采用IA(Image-Adaptive)-SimAM-YOLOv7-tiny网络对巷道待锚护孔位进行视觉识别,该网络能够自适应地增强图像亮度和对比度,恢复锚孔边缘的高频信息,并使模型重点关注锚孔特征,提高锚孔检测的成功率;②求解激光雷达和工业相机联合标定的外参矩阵,将图像检测的锚孔边界框通过透视投影关系生成锥形感兴趣区域(Region Of Interest,ROI),获得对应的目标点云团簇;③采用点云处理算法提取锚护孔位边界点云,获得孔位中心坐标及其法向量,并通过坐标深度差比较判断锚孔识别的正确性。文中搭建了锚杆台车机械臂钻孔定位系统,对算法自主定位的精度以及准确度进行验证,试验结果表明:IA-SimAM-YOLOv7-tiny模型的平均精度均值(Mean Average Precision,mAP)为87.3%,较YOLOv7-tiny模型提高了4.6%;提出的融合算法定位误差为3 mm,单锚孔情况下系统平均识别时间为0.77 s,与单一视觉方法相比,采用激光与视觉多源融合不仅可以降低环境和小样本训练对定位性能的影响,而且可以获得锚护孔位的法向量,为机械臂调整钻孔位姿实现精准锚固提供依据。展开更多
Laser tracers are a three-dimensional coordinate measurement system that are widely used in industrial measurement.We propose a geometric error identification method based on multi-station synchronization laser tracer...Laser tracers are a three-dimensional coordinate measurement system that are widely used in industrial measurement.We propose a geometric error identification method based on multi-station synchronization laser tracers to enable the rapid and high-precision measurement of geometric errors for gantry-type computer numerical control(CNC)machine tools.This method also improves on the existing measurement efficiency issues in the single-base station measurement method and multi-base station time-sharing measurement method.We consider a three-axis gantry-type CNC machine tool,and the geometric error mathematical model is derived and established based on the combination of screw theory and a topological analysis of the machine kinematic chain.The four-station laser tracers position and measurement points are realized based on the multi-point positioning principle.A self-calibration algorithm is proposed for the coordinate calibration process of a laser tracer using the Levenberg-Marquardt nonlinear least squares method,and the geometric error is solved using Taylor’s first-order linearization iteration.The experimental results show that the geometric error calculated based on this modeling method is comparable to the results from the Etalon laser tracer.For a volume of 800 mm×1000 mm×350 mm,the maximum differences of the linear,angular,and spatial position errors were 2.0μm,2.7μrad,and 12.0μm,respectively,which verifies the accuracy of the proposed algorithm.This research proposes a modeling method for the precise measurement of errors in machine tools,and the applied nature of this study also makes it relevant both to researchers and those in the industrial sector.展开更多
The existence of positive solutions for second order m-point boundary value problemx″-q(t)f(x,x′)x′=0, x(0)= m i=2 b ix(ξ i),x′(1)=αx′(0)are investigated,where ξ i,b i and α are constants satisfying...The existence of positive solutions for second order m-point boundary value problemx″-q(t)f(x,x′)x′=0, x(0)= m i=2 b ix(ξ i),x′(1)=αx′(0)are investigated,where ξ i,b i and α are constants satisfying 0=ξ 1<ξ 2<...<ξ m-1 <ξ m=1,b i≥0 for i=2,...,m with β∶= m i=2 b i∈[0,1), and α>1. Our approach is based on the fixed point theorem in cones.展开更多
文摘The automatic positioning control of mooring system for deepwater semi-submersible platform has become a key issue in the research and development field of deep-sea resources. The Dual-Stage Actuator (DSA) proposed in this paper can replace the single actuator to achieve the high speed and high precision positioning by cooperative control. The relative model and control algorithm of motion trajectory (CAMT) are designed and validated, which proves that the method proposed in this paper is effective.
文摘煤矿掘进巷道锚护位置的精准识别与定位是钻锚机器人实现智能永久支护亟需突破的关键技术。笔者提出一种基于视觉图像与激光点云融合的巷道锚护孔位智能识别定位方法,包括图像目标识别、点云图像特征融合和定位坐标提取3个步骤:①针对煤矿井下低照度、水雾和粉尘等环境因素导致的锚孔轮廓成像模糊的问题,采用IA(Image-Adaptive)-SimAM-YOLOv7-tiny网络对巷道待锚护孔位进行视觉识别,该网络能够自适应地增强图像亮度和对比度,恢复锚孔边缘的高频信息,并使模型重点关注锚孔特征,提高锚孔检测的成功率;②求解激光雷达和工业相机联合标定的外参矩阵,将图像检测的锚孔边界框通过透视投影关系生成锥形感兴趣区域(Region Of Interest,ROI),获得对应的目标点云团簇;③采用点云处理算法提取锚护孔位边界点云,获得孔位中心坐标及其法向量,并通过坐标深度差比较判断锚孔识别的正确性。文中搭建了锚杆台车机械臂钻孔定位系统,对算法自主定位的精度以及准确度进行验证,试验结果表明:IA-SimAM-YOLOv7-tiny模型的平均精度均值(Mean Average Precision,mAP)为87.3%,较YOLOv7-tiny模型提高了4.6%;提出的融合算法定位误差为3 mm,单锚孔情况下系统平均识别时间为0.77 s,与单一视觉方法相比,采用激光与视觉多源融合不仅可以降低环境和小样本训练对定位性能的影响,而且可以获得锚护孔位的法向量,为机械臂调整钻孔位姿实现精准锚固提供依据。
基金Supported by Natural Science Foundation of Shaanxi Province of China(Grant No.2021JM010)Suzhou Municipal Natural Science Foundation of China(Grant Nos.SYG202018,SYG202134).
文摘Laser tracers are a three-dimensional coordinate measurement system that are widely used in industrial measurement.We propose a geometric error identification method based on multi-station synchronization laser tracers to enable the rapid and high-precision measurement of geometric errors for gantry-type computer numerical control(CNC)machine tools.This method also improves on the existing measurement efficiency issues in the single-base station measurement method and multi-base station time-sharing measurement method.We consider a three-axis gantry-type CNC machine tool,and the geometric error mathematical model is derived and established based on the combination of screw theory and a topological analysis of the machine kinematic chain.The four-station laser tracers position and measurement points are realized based on the multi-point positioning principle.A self-calibration algorithm is proposed for the coordinate calibration process of a laser tracer using the Levenberg-Marquardt nonlinear least squares method,and the geometric error is solved using Taylor’s first-order linearization iteration.The experimental results show that the geometric error calculated based on this modeling method is comparable to the results from the Etalon laser tracer.For a volume of 800 mm×1000 mm×350 mm,the maximum differences of the linear,angular,and spatial position errors were 2.0μm,2.7μrad,and 12.0μm,respectively,which verifies the accuracy of the proposed algorithm.This research proposes a modeling method for the precise measurement of errors in machine tools,and the applied nature of this study also makes it relevant both to researchers and those in the industrial sector.
基金Natural Scince Foundation of China and Foundation for University Key Teacher by the Ministry of Education
文摘The existence of positive solutions for second order m-point boundary value problemx″-q(t)f(x,x′)x′=0, x(0)= m i=2 b ix(ξ i),x′(1)=αx′(0)are investigated,where ξ i,b i and α are constants satisfying 0=ξ 1<ξ 2<...<ξ m-1 <ξ m=1,b i≥0 for i=2,...,m with β∶= m i=2 b i∈[0,1), and α>1. Our approach is based on the fixed point theorem in cones.
