Multi-Stage Multidisciplinary Design Optimization Method for Enhancing Complete Artillery Internal Ballistic Firing Performance

To enhance the comprehensive performance of artillery internal ballistics—encompassing power,accuracy,and service life—this study proposed a multi-stage multidisciplinary design optimization(MS-MDO)method.First,the comprehensive artillery internal ballistic dynamics(AIBD)model,based on propellant combustion,rotation band engraving,projectile axial motion,and rifling wear models,was established and validated.This model was systematically decomposed into subsystems from a system engineering perspective.The study then detailed the MS-MDO methodology,which included Stage I(MDO stage)employing an improved collaborative optimization method for consistent design variables,and Stage II(Performance Optimization)focusing on the independent optimization of local design variables and performance metrics.The methodology was applied to the AIBD problem.Results demonstrated that the MS-MDO method in Stage I effectively reduced iteration and evaluation counts,thereby accelerating system-level convergence.Meanwhile,Stage II optimization markedly enhanced overall performance.These comprehensive evaluation results affirmed the effectiveness of the MS-MDO method.

Research on Regulation Method of Energy Storage System Based on Multi-Stage Robust Optimization

To address the scheduling problem involving energy storage systems and uncertain energy,we propose a method based on multi-stage robust optimization.This approach aims to regulate the energy storage system by using a multi-stage robust optimal control method,which helps overcome the limitations of traditional methods in terms of time scale.The goal is to effectively utilize the energy storage power station system to address issues caused by unpredictable variations in environmental energy and fluctuating load throughout the day.To achieve this,a mathematical model is constructed to represent uncertain energy sources such as photovoltaic and wind power.The generalized Benders Decomposition method is then employed to solve the multi-stage objective optimization problem.By decomposing the problem into a series of sub-objectives,the system scale is effectively reduced,and the algorithm’s convergence ability is improved.Compared with other algorithms,the multi-stage robust optimization model has better economy and convergence ability and can be used to guide the power dispatching of uncertain energy and energy storage systems.

Mushroomβ-glucan and polyphenol formulations as natural immunity boosters and balancers:nature of the application

Mushrooms are experiencing a kind of renaissance as a part of the contemporary human diet.These valuable organisms are more than food,they fit in perfectly as a novel market group known as nutra-mycoceuticals.Immune-balancing mushroom dietary fibers and secondary metabolites such as polyphenols are the main focus of the healthcare industry.Wellness and cosmetic companies are increasingly using mushroom extracts rich in these ingredients.This review considers the basic molecular immunomodulatory mechanisms of action of the most commonly used mushroom dietary fibers,β-glucans.The literature data on their bioavailability,metabolic transformations,preclinical and human clinical research,and safety are discussed.Immunomodulatory mechanisms of polyphenol ingredients are also considered.These molecules present great potential in the design of the new immunity balancer formulations according to their widespread structural diversity.Finally,we draw attention to the perspectives of modern trends in mushroom nutraceutical and cosmeceutical formulations to strengthen and balance immunity.

Trace Elements of Multi-stage Minerals and Titanite U-Pb Dating for the Gneisses from Liansan Island,Sulu UHPM Belt

Gneisses with anatectic characteristics from the Liansan island in the Sulu UHPM(ultra-high pressure metamorphic)belt were studied for petrography,titanite U-Pb dating and mineral geochemistry.Three origins of garnets are distinguished:metamorphic garnet,peritectic garnet and anatectic garnet,which are formed in the stages of peak metamorphism,retrograde anatexis and melt crystallization,respectively.The euhedral titanite has a high content of REE and high Th/U ratios,which is interpreted as indicating that it was newly-formed from an anatectic melt.The LA-ICP-MS titanite U-Pb dating yields 214-217 Ma ages for the titanite(melt)crystallization.The distribution of trace elements varies in response to the different host minerals at different stages.At the peak metamorphic stage,Y and HREE are mainly hosted by garnet,Ba and Rb by phengite,Sr,Nb,Ta,Pb,Th,U and LREE by allanite and Y,U and HREE by zircon.During partial melting,Y,Pb,Th,U and REE are released into the melt,which causes a dramatic decline of these element contents in the retrograde minerals.Finally,titanite absorbs most of the Nb,U,LREE and HREE from the melt.Therefore,the different stages of metamorphism have different mineral assemblages,which host different trace elements.

Overview of multi-stage charging strategies for Li-ion batteries

To reduce the carbon footprint in the transportation sector and improve overall vehicle efficiency,a large number of electric vehicles are being manufactured.This is due to the fact that environmental concerns and the depletion of fossil fuels have become significant global problems.Lithium-ion batteries(LIBs)have been distinguished themselves from alternative energy storage technologies for electric vehicles(EVs) due to superior qualities like high energy and power density,extended cycle life,and low maintenance cost to a competitive price.However,there are still certain challenges to be solved,like EV fast charging,longer lifetime,and reduced weight.For fast charging,the multi-stage constant current(MSCC) charging technique is an emerging solution to improve charging efficiency,reduce temperature rise during charging,increase charging/discharging capacities,shorten charging time,and extend the cycle life.However,there are large variations in the implementation of the number of stages,stage transition criterion,and C-rate selection for each stage.This paper provides a review of these problems by compiling information from the literature.An overview of the impact of different design parameters(number of stages,stage transition,and C-rate) that the MSCC charging techniques have had on the LIB performance and cycle life is described in detail and analyzed.The impact of design parameters on lifetime,charging efficiency,charging and discharging capacity,charging speed,and rising temperature during charging is presented,and this review provides guidelines for designing advanced fast charging strategies and determining future research gaps.

Multi-Stage Improvement of Marine Predators Algorithm and Its Application

The metaheuristic algorithms are widely used in solving the parameters of the optimization problem.The marine predators algorithm(MPA)is a novel population-based intelligent algorithm.Although MPA has shown a talented foraging strategy,it still needs a balance of exploration and exploitation.Therefore,a multi-stage improvement of marine predators algorithm(MSMPA)is proposed in this paper.The algorithm retains the advantage of multistage search and introduces a linear flight strategy in the middle stage to enhance the interaction between predators.Predators further away from the historical optimum are required to move,increasing the exploration capability of the algorithm.In the middle and late stages,the searchmechanism of particle swarmoptimization(PSO)is inserted,which enhances the exploitation capability of the algorithm.This means that the stochasticity is decreased,that is the optimal region where predators jumping out is effectively stifled.At the same time,self-adjusting weight is used to regulate the convergence speed of the algorithm,which can balance the exploration and exploitation capability of the algorithm.The algorithm is applied to different types of CEC2017 benchmark test functions and threemultidimensional nonlinear structure design optimization problems,compared with other recent algorithms.The results show that the convergence speed and accuracy of MSMPA are significantly better than that of the comparison algorithms.

Milestone progress of the HEPS booster commissioning

The high-energy photon source(HEPS)is the first fourth-generation synchrotron light source facility in China.The HEPS injector consists of a linear accelerator(Linac)and a full energy booster.The booster captures the electron beam from the Linac and increases its energy to the value required for the storage ring.The full-energy beam could be injected to the storage ring directly or after“high-energy accumulation.”On November 17,2023,the key booster parameters successfully reached their corresponding target values.These milestone results were achieved based on numerous contributions,including nearly a decade of physical design,years of equipment development and installation,and months of beam commissioning.As measured at the extraction energy of 6 GeV,the averaged beam current and emittance reached 8.57 mA with 5 bunches and 30.37 nm rad with a single-bunch charge of 5.58 nC,compared with the corresponding target values of 6.6 mA and 35 nm rad,respectively.This paper presents the physical design,equipment development,installation,and commissioning process of the HEPS booster.

Knowledge, attitudes, and practices regarding Covid-19 and their relationship with Covid-19 booster vaccination status among women with infertility

Objective:To elucidate the relationship among knowledge,attitudes,and practices regarding Covid-19 and their relationship with booster vaccination status among women with infertility.Methods:This questionnaire-based cross-sectional study was performed online and offline among women with infertility who visited an infertility clinic in Jakarta,Indonesia.We assessed the patient’s knowledge,attitudes,and practices regarding Covid-19 and their relationship with booster vaccination status and sociodemographic profile.Results:A total of 178 subjects participated in this study,and most participants(92.6%)had received booster Covid-19 vaccines.From the questionnaire,74.2%had good knowledge,and 99.4%had good attitudes regarding Covid-19;however,only 57.9%of patients had good practices.A weak positive correlation existed between knowledge and attitudes(r=0.11,P=0.13)and a moderate negative correlation between attitudes and practices(r=-0.44,P=0.56).Participants’knowledge about vaccines and infertility was correlated with booster vaccination status(P=0.04).Academic background(P=0.01)and attitudes(P=0.01)were also correlated with booster vaccination status.The significant determinants of hesitance of receiving Covid-19 booster vaccines were high school education or below(OR=0.08,95%CI 0.02-0.36)and poor practices(OR=0.21,95%CI 0.05-0.95).Conclusions:The majority of the participants had received the Covid-19 booster vaccine and had good knowledge and attitudes but poor practices regarding Covid-19.Most participants had poor knowledge about the relationship between infertility and the Covid-19 vaccine.The general population should be more informed and reminded about practices to prevent Covid-19 and the relationship between vaccination and fertility to increase the number of people who receive Covid-19 booster vaccines.

基于Multi-Stage DEA模型的中国细羊毛生产技术效率实证分析

以内蒙古等4省区为例，采用基于规模报酬可变假设的产出主导型Muhi-StageDEA模型，对2001～2010年中国细羊毛生产技术效率进行了测算和分析。研究结果表明，中国细羊毛生产技术效率不高，存在显著的技术效率损失；细羊毛生产在总体上出现了纯技术效率下降和规模效率提高并存的现象，2008年以来纯技术效率提高对细羊毛生产技术效率改善的促进作用逐渐增强，而细羊毛生产规模效率则呈现出了一定的下降趋势；各省区细羊毛生产技术效率存在较大差异，细羊毛生产的规模效率均要高于纯技术效率，规模效率仍是影响各省区细羊毛生产技术效率改善和提高的主要因素。最后提出改善和提高中国细羊毛生产技术效率的政策建议。

Transfer matrix method for determination of the natural vibration characteristics of elastically coupled launch vehicle boosters

The analysis of natural vibration characteristics has become one of important steps of the manufacture and dynamic design in the aerospace industry. This paper presents a new scenario called virtual cutting in the context of the transfer matrix method of linear multibody systems closed- loop topology for computing the free vibration characteristics of elastically coupled flexible launch vehicle boosters. In this approach, the coupled system is idealized as a triple-beam system-like structure coupled by linear translational springs, where a non-uniform free-free Euler-Bemoulli beam is used. A large thrust-to-weight ratio leads to large axial accelera- tions that result in an axial inertia load distribution from nose to tail. Consequently, it causes the development of significant compressive forces along the length of the launch vehicle. Therefore, it is important to take into account this effect in the transverse vibration model. This scenario does not need the global dynamics equations of a system, and it has high computational efficiency and low memory requirements. The validity of the presented scenario is achieved through com- parison to other approaches published in the literature.

Study on the hot deformation behavior of Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot compression

The mechanical behavior and microstructures of an Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot deformation were investigated by thermal stimulation test, optical microscopy, and transmission electron microscopy. The true stress vs true strain curves and the microstructure evolution of two hot deformation procedures were gained. The flow stress of the alloy studied decreases with increasing the deforming passes and declining the temperature, and the larger the temperature decline between adjacent stages, the larger the peak stress fall is. The stress-strain behavior mainly result from the dynamic recovery during deformation, the static recovery and recrystallization in the delay time, and the second phases precipitated from the matrix at high temperature.

Springback analysis and strategy for multi-stage thin-walled parts with complex geometries

Springback of a SUS321 complex geometry part formed by the multi-stage rigid-flexible compound process was studied through numerical simulations and laboratory experiments in this work.The sensitivity analysis was provided to have an insight in the effect of the evaluated process parameters.Furthermore,in order to minimize the springback problem,an accurate springback simulation model of the part was established and validated.The effects of the element size and timesteps on springback model were further investigated.Results indicate that the custom mesh size is beneficial for the springback simulation,and the four timesteps are found suited for the springback analysis for the complex geometry part.Finally,a strategy for reducing the springback by changing the geometry of the blank is proposed.The optimal blank geometry is obtained and used for manufacturing the part.

Sequential maneuvering decisions based on multi-stage influence diagram in air combat

A multi-stage influence diagram is used to model the pilot＇s sequential decision making in one on one air combat. The model based on the multi-stage influence diagram graphically describes the elements of decision process, and contains a point-mass model for the dynamics of an aircraft and takes into account the decision maker＇s preferences under uncertain conditions. Considering an active opponent, the opponent＇s maneuvers can be modeled stochastically. The solution of multistage influence diagram can be obtained by converting the multistage influence diagram into a two-level optimization problem. The simulation results show the model is effective.

Influence of multi-stage heat treatment on the microstructure and mechanical properties of TC21 titanium alloy

Duplex-structured TC21 alloy samples were first solution-treated at a higher temperature in theα+βregion(940°C)with furnace cooling(FC),air cooling(AC),and water cooling(WC),followed by a second-stage solution treatment at a lower temperature in theα+βregion(900°C),and then finally aged at 590°C.The effects of the morphology and quantity ofαphases on the structure and properties of the TC21 alloy after the different heat treatments were analyzed.The in-situ tensile deformation process and crack propagation behavior were observed using scanning electron microscopy(SEM).The quantity of equiaxedαphases as well as the thickness of lamellarαphases reduced,the tensile strength increased firstly and then decreased,the elongation decreased with the increasing cooling rate after the first-stage solution treatment.The amount and size of lamellarαphases increased after the second-stage solution treatment because of sufficient diffusion of the alloying elements,thereby leading to increased tensile strength.The amount of dispersedαphases increased after the third-stage aging treatment owing to the increase in the nucleation rate,resulting in a noteworthy strengthening effect.After the third-stage aging treatment,the first-stage FC sample exhibited better mechanical properties because it contained more equiaxedαandβtrans phases than the first-stage AC and WC samples.

Multi-Stage Hierarchical Channel Allocation in UAV-Assisted D2D Networks:A Stackelberg Game Approach

UAV-assisted D2D networks can provide auxiliary communication for areas with poor communication facilities by using the characteristics of easy deployment of unmanned aerial vehicle(UAV),then it becomes a promising technology.However,the coexistence of UAV and D2D aggravates the conflict of spectrum resources.In addition,when the UAV performs the communication service,it will inevitably cause the location change,which will make the original channel allocation no longer applicable.Inspired by the influence of frequent channel switching on channel allocation,we define the communication utility as a tradeoff between the throughput and channel switching cost.In the considered model,we investigate the multi-stage hierarchical spectrum access problem with maximizing aggregate communication utilities in UAV-assisted D2D networks.In particular,due to the hierarchical feature of the considered network,we adopt Stackelberg game to formulate this spectrum access problem where both the throughput and channel switching cost are considered.We prove that the proposed game has a stable Stackelberg equilibrium(SE),and the heterogeneous network based channel allocation(HN-CA)algorithm is proposed to achieve the desired solution.Simulation results verify the validity of the proposed game and show the effectiveness of the HN-CA algorithm.

Development of a 4 MV Laser-Triggered Multi-Stage Switch

A 22-stage 4 MV laser-triggered multistage multi-channel switch （LTS） was designed according to the hypothesis that the well-proportioned electrical field distribution is helpful in reducing the jitter of delay. Field distribution in the switch section is regulated by a metal field regulation ring and several gradient rings. In order to reduce the jitter further, a SFB/N2 mixture is chosen as the switching medium. The generalized standard deviation of the self-breakdown voltage and the deviation of the average value from the prediction is less than 4.4% and 13% respectively. Linearity of the self-breakdown voltage is better than 0.95. Triggered by a laser pulse of 35 mJ/3 ns, the delay is about 26 ns at a working voltage of 85±3% USB （Self-breakdown Voltage）. Maximum deviation of delay is less than =t=2.5 ns. Jitter is less than 1.5 ns. The delay and jitter decrease with the increase in the working ratio （the ratio of working voltage to USB）, pressure or voltage.

Dynamic performance of cable-stayed bridge tower with multi-stage pendulum mass damper under wind excitations——I:Theory

In this paper, wind-induced vibration control of a single column tower of a cable-stayed bridge with a multi- stage pendulum mass damper （MSPMD） is investigated. Special attention is given to overcoming space limitations for installing the control device in the tower and the effect of varying natural frequency of the towers during construction. First, the finite element model of the bridge during its construction and the basic equation of motion of the MSPMD are introduced. The equation of motion of the bridge with the MSPMD under along-wind excitation is then established. Finally, a numerical simulation and parametric study are conducted to assess the effectiveness of the control system for reducing the wind-induced vibration of the bridge towers during construction. The numerical simulation results show that the MSPMD is practical and effective for reducing the along-wind response of the single column tower, can be installed in a small area of the tower, and complies with the time-variant characteristics of the bridge during its entire construction stage.

Optimal Active Defence Using Dynamic Multi-Stage Signalling Game

Nowadays, security defence of network uses the game theory, which mostly applies complete information game model or even the static game model. To get closer to the actual network and defend actively, we propose a network attack-defence game model by using signalling game, which is modelled in the way of dynamic and incomplete information. We improve the traditional attack-defence strategies quantization method to meet the needs of the network signalling game model. Moreover, we give the calculation of the game equilibrium and analyse the optimal defence scheme. Finally, we analyse and verify effectiveness of the model and method through a simulation experiment.

Dynamic performance of cable-stayed bridge tower with multi-stage pendulum mass damper under wind excitations—Ⅱ: Experiment

The possibility of using a multi-stage pendulum mass damper （MSPMD） to control wind-induced vibration of a single column tower of a cable-stayed bridge during construction was studied theoretically in part I of this work. In this paper, the performance of the MSPMD for reducing bridge tower vibration is studied experimentally. A MSPMD model and a tower model of the bridge with geometry scaling of 1：100 were designed and manufactured. Calibration of the MSPMD model with different wire lengths is conducted to verify the analytical model of the damper. A series of tests for the uncontrolled freestanding tower, tower with cables, and tower with MSPMD model are then performed under harmonic and white noise excitations. The experimental results show that the responses of the tower model significantly decrease with the installation of the MSPMD model, which demonstrates the effectiveness of the M SPMD to mitigate the vibration of the bridge tower.

STATE SPACE MODELING OF DIMENSIONAL MACHINING ERRORS OF SERIAL-PARALLEL HYBRID MULTI-STAGE MACHINING SYSTEM

The final product quality is determined by cumulation, coupling and propagation of product quality variations from all stations in multi-stage manufacturing systems （MMSs）. Modeling and control of variation propagation is essential to improve product quality. However, the current stream of variations （SOV） theory can only solve the problem that a single SOV affects the product quality. Due to the existence of multiple variation streams, limited research has been done on the quality control in serial-parallel hybrid multi-stage manufacturing systems （SPH-MMSs）. A state space model and its modeling strategies are developed to describe the multiple variation streams stack-up in an SPH-MMS. The SOV theory is extended to SPH-MMS. The dimensions of system model are reduced to the production-reality level, and the effect and feasibility of the model is validated by a machining case.