The molar enthalpies of dissolution for 2-(dinitromethylene)-5-methyl-1,3-diazacyclopentane(DNMDZ) in dimethyl sulfoxide(DMSO) and N-methyl pyrrolidone(NMP) were measured using an RD496-2000 Calvet microcalori...The molar enthalpies of dissolution for 2-(dinitromethylene)-5-methyl-1,3-diazacyclopentane(DNMDZ) in dimethyl sulfoxide(DMSO) and N-methyl pyrrolidone(NMP) were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure.Empirical formulae for the calculation of the molar enthalpies of dissolution(Δ diss H) were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP.The relationships between the rate constant(k) and the molality(b) and between the reaction order(n) and the molality(b) were determined.The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16(1-α) ^1.01 for the dissolution of DNMDZ in DMSO,and dα/dt=10^-2.02(1-α)^ 0.85 for the dissolution of DNMDZ in NMP,respectively.展开更多
Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these d...Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these data, the excess molar volume and deviations in viscosity have been calculated. The computed quantities have been fitted to the Redlich-Kister Equation to derive coefficients and estimate the standard error values. Results are discussed in terms of intermolecular interactions.展开更多
High quality perovskite films with large columnar grains are greatly desired for efficient perovskite solar cells. Here, low volatility N-methyl-2-pyrrolidone(NMP) was added in MAI/IPA solution in a two-step spin-coat...High quality perovskite films with large columnar grains are greatly desired for efficient perovskite solar cells. Here, low volatility N-methyl-2-pyrrolidone(NMP) was added in MAI/IPA solution in a two-step spin-coating method, which promoted the conversion of lead iodide to perovskite. The perovskite films were annealed by a closed-steam annealing method to prolong the recrystallization process of perovskite films assisted by the residual NMP. It leaded to high quality CH_3NH_3PbI_3 perovskite films with large columnar grains due to its enhancement of the Oswald ripening. The large grain perovskite film leaded to efficient carrier transformation and injection, and low recombination. The photovoltaic performance of the perovskite solar cells was improved significantly.展开更多
为探究溶剂对合成有机金属框架化合物的影响机制,采用实验和DFT理论计算相结合的方法,研究溶剂N,N-二甲基甲酰胺(DMF)和N-甲基-2-吡咯烷酮(NMP)对溶剂热法合成有机金属框架材料[Zn4O(BDC)3]8的影响及溶剂与框架间的微观作用机制。粉末X...为探究溶剂对合成有机金属框架化合物的影响机制,采用实验和DFT理论计算相结合的方法,研究溶剂N,N-二甲基甲酰胺(DMF)和N-甲基-2-吡咯烷酮(NMP)对溶剂热法合成有机金属框架材料[Zn4O(BDC)3]8的影响及溶剂与框架间的微观作用机制。粉末X射线衍射(XRD)和扫描电镜(SEM)结果表明,NMP在[Zn4O(BDC)3]8孔道中的吸附力较DMF的弱,NMP分子更容易从框架中脱除;热重(TG)和热重-红外联用(TGA/FT-IR)结果表明,以DMF为溶剂合成的[Zn4O(BDC)3]8的热分解温度和热稳定性较高;氮气等温吸附实验(BET)发现,以NMP为溶剂合成的[Zn4O(BDC)3]8的气体吸附性能更强,兰缪尔比表面积高于用DMF合成的[Zn4O(BDC)3]8。调控介电常数设定溶剂分别为NMP和DMF,用COSMO溶剂化方法对溶剂分子与框架化合物基本结构单元Zn4O(BDC)3间相互作用模型进行几何优化计算,发现溶剂设定为NMP时Zn4O(BDC)3优化结构的总能量较溶剂设定为DMF时的高8.6405 k J/mol,这说明DMF分子与Zn4O(BDC)3间的结合力强于NMP分子的,溶剂化作用降低了Zn与O间的离子性;用DMol3在GGA-BLYP/DN水平计算了DMF、NMP或DEF溶剂分子在[Zn4O(BDC)3]8晶体孔道中的相互作用,与DMF相比,NMP在孔道中能量状态稳定性较差,在能量状态角度上NMP应最容易从框架材料孔道中脱除。研究结果说明NMP更有利于合成性质良好的[Zn4O(BDC)3]8,与DMF相比NMP与框架结构基元间的作用力较弱。展开更多
基金Supported by the Science and Technology Foundation of the Science and Technology on Combustion and Explosion Laboratory of Xi’an Modern Chemistry Research Institute,China(No.9140C35030112OC3501)
文摘The molar enthalpies of dissolution for 2-(dinitromethylene)-5-methyl-1,3-diazacyclopentane(DNMDZ) in dimethyl sulfoxide(DMSO) and N-methyl pyrrolidone(NMP) were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure.Empirical formulae for the calculation of the molar enthalpies of dissolution(Δ diss H) were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP.The relationships between the rate constant(k) and the molality(b) and between the reaction order(n) and the molality(b) were determined.The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16(1-α) ^1.01 for the dissolution of DNMDZ in DMSO,and dα/dt=10^-2.02(1-α)^ 0.85 for the dissolution of DNMDZ in NMP,respectively.
文摘Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these data, the excess molar volume and deviations in viscosity have been calculated. The computed quantities have been fitted to the Redlich-Kister Equation to derive coefficients and estimate the standard error values. Results are discussed in terms of intermolecular interactions.
基金financially supported by the National Natural Science Foundation of China(Grant No.21463002)Startup Funding of Distinguished Professorship of "1000 Talents Program"(31370086963030)+4 种基金Shenzhen Jiawei Photovoltaic Lighting Co.,Ltd.Tsinghua University Initiative Scientific Research Program(20161080165)Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2016D01C008)Opening Project of State Key laboratory of Crystal Material(No.KF1610)Scientific Research Program of the Higher Education Institution of Xinjiang(XJEDU2017M038)
文摘High quality perovskite films with large columnar grains are greatly desired for efficient perovskite solar cells. Here, low volatility N-methyl-2-pyrrolidone(NMP) was added in MAI/IPA solution in a two-step spin-coating method, which promoted the conversion of lead iodide to perovskite. The perovskite films were annealed by a closed-steam annealing method to prolong the recrystallization process of perovskite films assisted by the residual NMP. It leaded to high quality CH_3NH_3PbI_3 perovskite films with large columnar grains due to its enhancement of the Oswald ripening. The large grain perovskite film leaded to efficient carrier transformation and injection, and low recombination. The photovoltaic performance of the perovskite solar cells was improved significantly.
基金Project(51104185)supported by the National Natural Science Foundation of ChinaProject(2010QZZD003)supported by the Key Project of Central South University of Fundamental Research Funds for the Central Universities of China
文摘为探究溶剂对合成有机金属框架化合物的影响机制,采用实验和DFT理论计算相结合的方法,研究溶剂N,N-二甲基甲酰胺(DMF)和N-甲基-2-吡咯烷酮(NMP)对溶剂热法合成有机金属框架材料[Zn4O(BDC)3]8的影响及溶剂与框架间的微观作用机制。粉末X射线衍射(XRD)和扫描电镜(SEM)结果表明,NMP在[Zn4O(BDC)3]8孔道中的吸附力较DMF的弱,NMP分子更容易从框架中脱除;热重(TG)和热重-红外联用(TGA/FT-IR)结果表明,以DMF为溶剂合成的[Zn4O(BDC)3]8的热分解温度和热稳定性较高;氮气等温吸附实验(BET)发现,以NMP为溶剂合成的[Zn4O(BDC)3]8的气体吸附性能更强,兰缪尔比表面积高于用DMF合成的[Zn4O(BDC)3]8。调控介电常数设定溶剂分别为NMP和DMF,用COSMO溶剂化方法对溶剂分子与框架化合物基本结构单元Zn4O(BDC)3间相互作用模型进行几何优化计算,发现溶剂设定为NMP时Zn4O(BDC)3优化结构的总能量较溶剂设定为DMF时的高8.6405 k J/mol,这说明DMF分子与Zn4O(BDC)3间的结合力强于NMP分子的,溶剂化作用降低了Zn与O间的离子性;用DMol3在GGA-BLYP/DN水平计算了DMF、NMP或DEF溶剂分子在[Zn4O(BDC)3]8晶体孔道中的相互作用,与DMF相比,NMP在孔道中能量状态稳定性较差,在能量状态角度上NMP应最容易从框架材料孔道中脱除。研究结果说明NMP更有利于合成性质良好的[Zn4O(BDC)3]8,与DMF相比NMP与框架结构基元间的作用力较弱。