Review on synergistic damage effect of irradiation and corrosion on reactor structural alloys

The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fourth-generation fission nuclear energy structural materials used in pressurized water reactors and molten salt reactors.The competitive mechanisms of multiple influencing factors,such as the irradiation dose,corrosion type,and environmental temperature,are summarized in this paper.Conceptual approaches are proposed to alleviate the synergistic damage caused by irradiation and corrosion,thereby promoting in-depth research in the future and solving this key challenge for the structural materials used in reactors.

Neutron irradiation influence on high-power thyristor device under fusion environment

Because of their economy and applicability,high-power thyristor devices are widely used in the power supply systems for large fusion devices.When high-dose neutrons produced by deuterium–tritium(D–T)fusion reactions are irradiated on a thyristor device for a long time,the electrical characteristics of the device change,which may eventually cause irreversible damage.In this study,with the thyristor switch of the commutation circuit in the quench protection system(QPS)of a fusion device as the study object,the relationship between the internal physical structure and external electrical parameters of the irradiated thyristor is established.Subsequently,a series of targeted thyristor physical simulations and neutron irradiation experiments are conducted to verify the accuracy of the theoretical analysis.In addition,the effect of irradiated thyristor electrical characteristic changes on the entire QPS is studied by accurate simulation,providing valuable guidelines for the maintenance and renovation of the QPS.

In situ TEM investigation of electron irradiation and aging-induced high-density nanoprecipitates in an Mg-10Gd-3Y-1Zn-0.5Zr alloy

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3Y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the hardness.The results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being treated.It is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous clusters.The latter plays a key role in precipitation hardening.This result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

Microwave irradiation-induced alterations in physicochemical properties and methane adsorption capability of coals:An experimental study using carbon molecular sieve

In order to comprehend the applicability of microwave irradiation for recovering coalbed methane,it is necessary to evaluate the microwave irradiation-induced alterations in coals with varying levels of metamorphism.In this work,the carbon molecular sieve combined with KMnO_(4)oxidation was selected to fabricate carbon molecular sieve with diverse oxidation degrees,which can serve as model substances toward coals.Afterwards,the microwave irradiation dependences of pores,functional groups,and highpressure methane adsorption characteristics of model substances were studied.The results indicated that microwave irradiation causes rearrangement of oxygen-containing functional groups,which could block the micropores with a size of 0.40-0.60 nm in carbon molecular sieve;meanwhile,naphthalene and phenanthrene generated by macro-molecular structure pyrolysis due to microwave irradiation could block the micropores with a size of 0.70-0.90 nm.These alterations in micropore structure weaken the saturated methane adsorption capacity of oxidized carbon molecular sieve by 2.91%-23.28%,suggesting that microwave irradiation could promote methane desorption.Moreover,the increased mesopores found for oxidized carbon molecular sieve after microwave irradiation could benefit CH4 diffusion.In summary,the oxidized carbon molecular sieve can act as model substances toward coals with different ranks.Additionally,microwave irradiation is a promising technology to enhance coalbed methane recovery.

Two-dimensional particle-in-cell modeling of blow-off impulse by X-ray irradiation

Space objects such as spacecraft or missiles may be exposed to intense X-rays in outer space,leading to severe damage.The reinforcement of these objects to reduce the damage caused by X-ray irradiation is a significant concern.The blow-off impulse(BOI)is a crucial physical quantity for investigating material damage induced by X-ray irradiation.However,the accurate calculation of BOI is challenging,particularly for large deformations of materials with complex configurations.In this study,we develop a novel two-dimensional particle-in-cell code,Xablation2D,to calculate BOIs under far-field X-ray irradiation.This significantly reduces the dependence of the numerical simulation on the grid shape.The reliability of this code is verified by simulation results from open-source codes,and the calculated BOIs are consistent with the experimental and analytical results.

Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5)metallic glass and crystalline W

In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed that with the irradiation dose increased,the tensile micro-strain increased,nano-hardness increased from 7.11 GPa to 7.90 GPa and 8.62 GPa,Young’s modulus increased,and H3/E2 increased which indicating that the plastic deformability decreased in crystalline W.Under the same irradiation conditions,the Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG still maintained the amorphous structure and became more disordered despite the longer range and stronger displacement damage of Ne ions in Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG than in crystalline W.Unlike the irradiation hardening and embrittlement behavior of crystalline W,Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG showed the gradual decrease in hardness from 6.02 GPa to 5.89 GPa and 5.50 GPa,the decrease in modulus and the increase in plastic deformability with the increasing dose.Possibly,the irradiation softening and toughening phenomenon of Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG could provide new ideas for the design of nuclear materials.

Effect of three-volt moxibustion with helium-neon laser irradiation on quality of care in patients with lumbar radiculopathy spondylosis

BACKGROUND Lumbar radiculopathy spondylosis is a relatively common orthopedic disease with a high incidence rate.It most commonly occurs in the lumbar 4-5 and lumbar 5-sacral 1 vertebrae,which account for approximately 95%of cases.It mostly occurs in people aged 30-50 years old and greatly affects their quality of life.AIM To determine the effect of triple-voltage acupuncture combined with helium-neon laser irradiation on the quality of care and improvement of symptoms in patients with lumbar radiculopathy spondylolisthesis.METHODS In this study,we selected 120 patients with lumbar radiculopathy spondylosis who were treated at our hospital between June 2019 to June 2020.The patients were divided into control and observation groups according to the random number table method,with 60 patients in each group.Patients in the observation group were treated with three-volt moxibustion combined with helium-neon laser irradiation,and those in the control group were treated with lumbar traction.After 1 month of treatment,the lumbar pain scores,lumbar spine motor functions,clinical treatment effects,and nursing satisfaction of the two groups were compared.RESULTS The results showed that acupuncture combined with laser irradiation significantly improved the patients'clinical symptoms,i.e.,reduced their low back pain,significantly lower numerical rating scale pain scores in the observation group than in the control group,and better lumbar spine motility than in the control group,compared to lumbar traction.In addition,they were cared for.The treatment effectiveness rate of the observation group was 95.5%,which was significantly higher than that of the control group(81.67%).Satisfaction with care was higher than 90 points in both groups,but the difference was not statistically significant.CONCLUSION Our study provides a clinical rationale for the future treatment of patients with lumbar spine disease.However,further extensive research is needed for validation.

The impact of^(60)Co-γirradiation on the chemical constituents of Chuanxiong Rhizoma

Background:In order to clarify the inmpat ofγirradiation on the chemical composition of traditional Chinese medicine,this paper carefully choosed Chuanxiong Rhizoma to carry on a demonstration study.Methods:Through a meticulous assessment,a comprehensive comparison was made between the irradiated and unirradiated Chuanxiong Rhizoma samples.The property characteristics were investigated by colorimeter and electronic nose.The changes in chemical structures and contents was analyzed by fourier infrared spectroscopy,high performance liquid chromatography and fingerprinting.In a quest to uncover the presence of any new radiolysis products,cutting-edge techniques like ultra performance liquid chromatography-quadrupole-time of flight-mass spectrometry and gas chromatography-mass spectrometry were employed.Moreover,the difference of antioxidant activity were investigated.Results:The irradiation doses within 12 kGy had no significant effects on the content of the main chemical components,characteristics and in vitro antioxidant activity of Chuanxiong Rhizoma,while changes in some functional groups and degradation of some volatile oil components containing olefins need further study.Conclusion:This study indicates that^(60)Co-γirradiation is a stable method for sterilization of Chuanxiong Rhizoma.It’s also provide a reference for the establishment of irradiation standards for Chuanxiong Rhizoma and other aromatic medicinal plants.

Observation of therapeutic effect of lamp irradiation combined with purple gromwell oil gauze on alleviating intestinal colic in patients

BACKGROUND Intestinal colic is a common complication in patients who have undergone radical surgery for colorectal cancer.Traditional Chinese medicine has advantages,including safety and stability,for the treatment of intestinal colic.Lamp irra-diation for abdominal ironing has been applied in the treatment of many gas-trointestinal diseases.Purple gromwell oil has the effects of clearing heat,cooling blood,reducing swelling,and relieving pain.RESULTS The general effective rate in the observation group was 95.00%,which was significantly higher than that in the control group(86.67%,P<0.05).Before treatment,there was no significant difference in the duration of symptoms between the groups(P>0.05).After 1,2,3,and 4 d of treatment,the duration of symptoms in both groups were decreased,and the duration in the observation group was significantly lower than that in the control group(96.54±9.57 vs 110.45±11.23,87.26±12.07 vs 104.44±11.68,80.45±16.21 vs 99.44±14.95,73.18±15.58 vs 92.17±14.20;P<0.05).After 1,3,5,and 7 d of treatment,the NRS scores in both groups were decreased,and the NRS scores in the observation group were significantly lower than those in the control group(3.56±0.41 vs 4.04±0.58,3.07±0.67 vs 3.74±1.02,2.52±0.76 vs 3.43±0.85,2.03±0.58 vs 3.03±0.82;P<0.05).There was no significant difference in the rate of adverse reaction occurrence between the groups(P>0.05).CONCLUSION The use of lamp irradiation combined with purple gromwell oil gauze in patients with intestinal colic after radical surgery for colorectal cancer can reduce symptom duration,alleviate intestinal colic,and improve treatment efficacy,and this approach is safe.It is worth promoting the use of this treatment in clinical practice.

Protective and Regenerative Efficacy of a Plant Oil-Based Day and Night Cream: Investigated by a Novel Approach to Reveal the Impact of Blue Light Irradiation on Epidermal Barrier Integrity and Lipid Matrix

In recent years, the harmful effects of blue light (400 - 500 nm) as a component of visible light (400 - 700 nm) have increasingly gained attention of science, industry, and consumers. To date, only a few in vivo test methods for measuring the effects of blue light on the skin have been described. A direct measurement method that can detect the immediate effects of blue light on the epidermal permeability barrier (EPB) is still lacking. In this study, we present a new methodological approach that can be used to investigate both the protective and regenerative effects of cosmetic products on the EPB after blue light irradiation. In a study with 14 female volunteers, it was investigated whether the regular application of an O/W emulsion (day cream) can strengthen and protect the epidermal barrier against damaging blue light radiation of 60 J/cm2 (protective study design) and also whether a disruption of the epidermal barrier caused by blue light radiation is restored faster and better by the regular application of another O/W emulsion (night cream) than in product-untreated skin (regenerative study design). The two O/W emulsions are different in plant oil, active ingredient composition and texture. The seven-day treatment with the day cream initially led to a significant increase in the normalized lipid lamellae length in the intercellular space, whereas the irradiation with blue light after 24 hours led to a significant decrease in the lipid lamellae length in the untreated test area, but not in the area previously treated with the product. Regarding the regenerative study design, a two-day treatment with the night cream was able to restore a blue-light-induced decrease in lipid lamellae length in the intercellular space. In summary, with the study designs presented here, the protective and regenerative effect of two cosmetic products could be demonstrated for the first time on the integrity of the EPB after blue light irradiation and the data showed that the Lipbarvis® method is suitable for investigating the damaging effects of blue light on the EPB in vivo.

通过成结模拟器研究n^(+)-n^(-)-p碲镉汞高温探测器

第三代红外探测器发展的一个重要方向是高工作温度探测器。对于碲镉汞n-on-p探测器而言,n^(+)-n^(-)-p结构以及良好的钝化工艺能够有效的抑制暗电流的产生,从而在高工作温度条件下获得较好的探测器性能。基于自行开发的成结模拟器,对n^(+)-n^(-)-p结构地高温器件进行了工艺仿真和器件仿真,获得成结过程的制备参数,并结合抑制表面漏电的组分梯度钝化工艺,将高工作温度下的暗电流抑制至理论极限,研制出可以在更高温度工作下的碲镉汞n-on-p红外焦平面探测器。经测试,中波n-on-p红外焦平面器件在不同工作温度下性能优异,在80 K工作温度下噪声等效温差(NETD)达到了6.1 mK,有效像元率为99.96%;而在150 K工作温度下噪声等效温差(NETD)为11.0 mK,有效像元率为99.50%,达到了同类器件的理论极限。

Simple synthesis of silver nanocluster composites AgNCs@PE-g-PAA by irradiation method and fluorescence detection of Cr^(3+)

Silver nanoclusters(AgNCs)are a new type of nanomaterials with similar properties to molecules and unique applications.The applications of AgNCs can be significantly expanded by combining them with different matrix materials to obtain AgNC composites.Using irradiation techniques,we developed a simple two-step method for preparing silver nanocluster composites.First,polyacrylic acid(PAA)chains were grafted onto the surface of a PE film as templates(PE-g-PAA).Subsequently,silver ions were reduced in situ on the surface of the template material to obtain the AgNC composites(AgNCs@PE-g-PAA).The degree of AgNC loading on the composite film was easily controlled by adjusting the reaction conditions.The loaded AgNCs were anchored to the carboxyl groups of the PAA and wrapped in the graft chain.The particle size of the AgNCs was only 4.38±0.85 nm,with a very uniform particle size distribution.The AgNCs@PE-g-PAA exhibited fluorescence characteristics derived from the AgNCs.The fluorescence of the AgNCs@PE-g-PAA was easily quenched by Cr^(3+)ions.The composite can be used as a fluorescence test paper to realize visual detection of Cr^(3+).

N^(6)-甲基腺苷修饰在动脉粥样硬化中的作用及药物干预的研究进展

N^(6)-甲基腺苷(m 6A)修饰是真核生物mRNA中最常见的表观转录组修饰形式之一,具有动态可逆性。该修饰过程由甲基转移酶、去甲基化酶和与m 6A结合的蛋白质协同作用,影响mRNA的代谢和功能。越来越多的研究表明,m 6A RNA修饰在动脉粥样硬化(As)等多种疾病的发生和发展中扮演重要角色。文章综述了m 6A RNA修饰与As的关系。全文对m 6A RNA修饰机制以及在As相关细胞(如内皮细胞、巨噬细胞和平滑肌细胞)中的作用进行了全面总结,并探讨了m 6A RNA修饰与As危险因素,如高脂饮食、缺血缺氧、振荡应力及高血压的关联。最后,文章还对药物干预m 6A RNA甲基化以实现延缓As的研究进行了综述,为探索As早期诊断和治疗的新靶点提供了重要参考。

Bi-LSTM-Based Deep Stacked Sequence-to-Sequence Autoencoder for Forecasting Solar Irradiation and Wind Speed

Wind and solar energy are two popular forms of renewable energy used in microgrids and facilitating the transition towards net-zero carbon emissions by 2050.However,they are exceedingly unpredictable since they rely highly on weather and atmospheric conditions.In microgrids,smart energy management systems,such as integrated demand response programs,are permanently established on a step-ahead basis,which means that accu-rate forecasting of wind speed and solar irradiance intervals is becoming increasingly crucial to the optimal operation and planning of microgrids.With this in mind,a novel“bidirectional long short-term memory network”(Bi-LSTM)-based,deep stacked,sequence-to-sequence autoencoder(S2SAE)forecasting model for predicting short-term solar irradiation and wind speed was developed and evaluated in MATLAB.To create a deep stacked S2SAE prediction model,a deep Bi-LSTM-based encoder and decoder are stacked on top of one another to reduce the dimension of the input sequence,extract its features,and then reconstruct it to produce the forecasts.Hyperparameters of the proposed deep stacked S2SAE forecasting model were optimized using the Bayesian optimization algorithm.Moreover,the forecasting performance of the proposed Bi-LSTM-based deep stacked S2SAE model was compared to three other deep,and shallow stacked S2SAEs,i.e.,the LSTM-based deep stacked S2SAE model,gated recurrent unit-based deep stacked S2SAE model,and Bi-LSTM-based shallow stacked S2SAE model.All these models were also optimized and modeled in MATLAB.The results simulated based on actual data confirmed that the proposed model outperformed the alternatives by achieving an accuracy of up to 99.7%,which evidenced the high reliability of the proposed forecasting.

低能N^(+)注入诱变耐诺氟沙星的金黄色葡萄球菌及其机制分析

利用低能N^(+)注入诱变筛选耐诺氟沙星的金黄色葡萄球菌,通过基因组测序、耐药表型和生物被膜分析,探索低能N^(+)注入驱动金黄色葡萄球菌产生诺氟沙星耐药性的机制。结果表明,利用低能N^(+)注入诱变获得81株耐诺氟沙星的金黄色葡萄球菌,其中44株耐药菌16S rRNA或耐药基因出现片段缺失、插入、点突变和拷贝数变化;且基因变化高的耐药菌的药物外排蛋白、生物被膜的生物量和密度显著增加,对诺氟沙星的耐药性提高了8~16倍,并对5~8种抗菌药物产生了多重耐药。说明低能N^(+)注入可能通过介导金黄色葡萄球菌16S rRNA或相关耐药基因变异,调控细菌药物外排蛋白表达量增加和生物被膜形成能力增强,进而介导菌株产生耐药性。

低能N^(+)注入诱导大肠杆菌的16S rRNA遗传进化

为了探究低能N^(+)注入对大肠杆菌16S rRNA遗传进化与耐药表征的作用,本研究利用低能N^(+)注入诱变筛选耐药大肠杆菌,通过基因组de novo测序获得其16S rRNA基因序列,通过K-B法检测诱变菌株的耐药特征。结果共诱变获得了25株耐药菌株,其中5株诱变菌16S rRNA基因分别出现片段缺失,点突变(A257C),GC%含量增高,二级结构变异,并获得多药耐药特性。结果提示:低能N^(+)注入可以驱动大肠杆菌16S rRNA基因的随机突变和进化,进而调节耐药基因从头合成或变异,使大肠杆菌耐药性改变。

Surface structure modification of ReSe2 nanosheets via carbon ion irradiation

The effects of C ion irradiation on multilayer ReSe2flakes are studied by utilizing different kinds of technologies. The domain sizes, thickness, morphologies of the multilayer ReSe2flakes on the Al2O3substrates before and after 1.0-MeV C ion irradiation with different fluence rates are studied by atomic force microscope and scanning electron microscopy. The atomic vibrational spectra of multilayer ReSe2flakes are detected by micro-Raman spectra. The redshifts of the Raman modes after 1.0-MeV C ion irradiation are observed from the micro-Raman spectra. The elemental compositions and bonding configurations of the multilayer ReSe2samples before and after irradiation processes are characterized by x-ray photoelectron spectroscopy. The structural properties are also investigated by x-ray diffraction, and it is concluded that after 1.0-MeV C ion irradiation process, multilayer ReSe2samples continue to grow on Al2O3substrates, the increase of crystallite size also reveals that the crystallinity is improved with the increase of the layer number after 1.0-MeV C ion irradiation.

Ultraviolet‑Irradiated All‑Organic Nanocomposites with Polymer Dots for High‑Temperature Capacitive Energy Storage

Polymer dielectrics capable of operating efficiently at high electric fields and elevated temperatures are urgently demanded by next-generation electronics and electrical power systems.While inorganic fillers have been extensively utilized to improved high-temperature capacitive performance of dielectric polymers,the presence of thermodynamically incompatible organic and inorganic components may lead to concern about the long-term stability and also complicate film processing.Herein,zero-dimensional polymer dots with high electron affinity are introduced into photoactive allyl-containing poly(aryl ether sulfone)to form the all-organic polymer composites for hightemperature capacitive energy storage.Upon ultraviolet irradiation,the crosslinked polymer composites with polymer dots are efficient in suppressing electrical conduction at high electric fields and elevated temperatures,which significantly reduces the high-field energy loss of the composites at 200℃.Accordingly,the ultraviolet-irradiated composite film exhibits a discharged energy density of 4.2 J cm^(−3)at 200℃.Along with outstanding cyclic stability of capacitive performance at 200℃,this work provides a promising class of dielectric materials for robust high-performance all-organic dielectric nanocomposites.

Atomic simulations of primary irradiation damage in U–Mo–Xe system

To shed a light on Xe bubble nucleation in U–Mo fuel from the view of primary irradiation damage,a reported U–Mo–Xe potential under the framework of embedded atom method has been modified within the range of short and intermediate atomic distance.The modified potential can better describe the interactions between energetic particles,and can accurately reproduce the threshold displacement energy surface calculated by the first-principles method.Then,molecular dynamics simulations of primary irradiation damage in U–Mo–Xe system have been conducted under different contents.The raise of Xe concentration brings about a remarkable promotion in residual defect quantity and generates bubbles in more overpressured state,which suggests an acceleration of irradiation damage under the accumulation of the fission gas.Meanwhile,the addition of Mo considerably reduces the residual defect count and hinders irradiation-induced Xe diffusion especially at high contents of Xe,corroborating the importance of high Mo content in mitigation of irradiation damage and swelling behavior in U–Mo fuel.In particular,the variation of irradiation damage with respect to contents suggests a necessity of taking into account the influence of local components on defect evolution in mesoscale simulations.

Effects of specific doses of E-beam irradiation which inactivated SARS-CoV-2 on the nutrition and quality of Atlantic salmon

The contamination of Atlantic salmon with severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)has impeded the development of the cold-chain food industry and posed possible risks to the population.Electron beam(E-beam)irradiation under 2,4,7,and 10 kGy can effectively inactivate SARS-CoV-2 in cold-chain seafood.However,there are few statistics about the quality changes of salmon exposed to these irradiation dosages.This work demonstrated that E-beam irradiation at dosages capable of killing SARS-CoV-2 induced lipid oxidation,decreased vitamin A content,and increased some amino acids and ash content.In addition,irradiation altered the textural features of salmon,such as its hardness,resilience,cohesiveness,and chewiness.The irradiation considerably affected the L*,a*,and b*values of salmon,with the L*value increasing and a*,b*values decreasing.There was no significant difference in the sensory evaluation of control and irradiated salmon.It was shown that irradiation with 2−7 kGy E-beam did not significantly degrade quality.The inactivation of SARS-CoV-2 in salmon is advised at a dose of 2 kGy.