Synthesis,Crystal Structure and Biological Activities of Novel Di-n-butyl Tin Di-carboxylate

A novel macrocyclic complex 2{[（n-Bu2Sn）4O2-L2]2DMF} was synthesized by the reaction of 4-（1,2- dithioethylene）methylene-3,5-disoxo-1,6-heptadiene-1,7-dis-（o-formy~）-dis-p-phenoxyacetic acid（LH2, compound 1） with di-n-butyltin oxide. Compound 1 and complex 2 were characterized by elemental analysis, FTIR spectroscopy, and ~H NMR spectroscopy. The crystal structure of complex 2 was determined by single crystal X-ray diffraction analysis. There are two crystallographic independent molecules in complex 2, and each molecule structure is centro-symmetric and features a central rhombus cyclic Bu4Sn2O2 unit with two exocyclic Sn atoms linked at the O atoms of the four-membered ring. In molecule A, the four Sn atoms are five-coordinated. However, in molecule B, the four Sn atoms have two different coordination geometries, the endocyclic Sn atoms are five-coordinated and the exocyclic Sn atoms are four-coordinated. The dicarboxylate ligands in molecules A and B bridge exocylic or endocyclic tin atoms, forming two macroheterocycles with 26 atoms. Pilot studies have indicated that complex 2 has good anti- bacterial and antitumour activities.

Esterification of levulinic acid to n-butyl levulinate over heteropolyacid supported on acid-treated clay

Levulinic acid has been identified as a promising green, biomass-derived platform chemical. n-Butyl levulinate is used as an important intermediate having diverse applications. The present work focuses on the synthesis of n-butyl levulinate by esterification of levulinic acid with n-butanol using heteropolyacid （HPA） supported on acid-treated clay montmorillonite （K10）. 20% （w/w） dodecatungestophosphoric acid （DTPA） supported on K10 was found to be the most efficient catalyst with 97% levulinic acid conversion and 100% selectivity towards n-butyl levulinate. Effects of various process parameters were studied to examine the efficacy of 20% （w/w） DTPA/K10 for optimization of the activity.

Efficient one-pot synthesis of n-butyl levulinate from carbohydrates catalyzed by Fe_2(SO_4)_3

Butyl levulinate（BL） is a promising new candidate as diesel fuel and fuel additive. In this study, an efficient process for a one-pot synthesis of BL from biomass-derived carbohydrates in butanol medium with the catalysis of metal sulfates was developed. The catalytic activity of a series of metal sulfates for the synthesis of BL from fructose was investigated. Among various metal sulfates, ferric sulfate Fe（SO）was found to be the most efficient catalyst, which gave a remarkably high BL yield of 62.8 mol% under the conditions of 463 K, 3 h, a catalyst dosage of 5.0 g/L, and fructose concentration of 25 g/L. Different carbohydrates including glucose, cellulose, inulin and sucrose were also used for one-pot synthesis of BL with the catalysis of Fe（SO）, showing the yields of 39.6, 30.5, 56.6 and 50.1 mol%, respectively. In addition,the recycling and reuse of Fe（SO）was studied by characterizing them using powder X-ray diffraction（XRD）, scanning electron microscope（SEM）, X-ray photoelectron spectroscopy（XPS）. A plausible reaction pathway for the one-pot synthesis of BL from fructose was proposed. This study provides a facile and feasible way for the synthesis of BL from biomass.

n-Butyl Pyridinium Nitrate as a Reusable Ionic Liquid Medium for Knoevenagel Condensation

The Knoevenagel condensation of carbonyl substrates with active methylene compounds proceeds smoothly with ammonium acetate as catalyst in n-butyl pyridinium nitrate to afford the desired products of good purity in moderate yields.

CO_2 capture from binary mixture via forming hydrate with the help of tetra-n-butyl ammonium bromide

Hydrate formation rate and separation effect on the capture of CO2 from binary mixture via forming hydrate with 5 wt% tetra-n-butyl ammonium bromide （TBAB） solution were studied. The results showed that the induction time was 5 min, and the hydrate formation process finished in 1 h at 4.5 ℃ and 4.01 MPa. The hydrate formation rate constant reached the maximum of 1.84× 10^-7 molZ/（s.J） with the feed pressure of 7.30 MPa. The CO2 recovery was about 45 % in the feed pressure range from 4.30 to 7.30 MPa. Under the feed pressure of 4.30 MPa, the maximum separation factor and CO2 concentration in hydrate phase were 7.3 and 38.2 mol%, respectively. The results demonstrated that TBAB accelerated hydrate formation and enriched CO2 in hydrate phase under the gentle condition.

Prevalence of gastric varices and results of sclerotherapy with N-butyl 2 cyanoacrylate for controlling acute gastric variceal bleeding

AIM： To study the prevalence, predictors and control of bleeding following N-butyl 2 cyanoacrylate （NBC） sclerotherapy of gastric varix （GV）. METHODS： We analyzed case records of 1436 patients with portal hypertension, who underwent endoscopy during the past five years for variceal screening or upper gastrointestinal （GI） bleeding. Fifty patients with bleeding GV underwent sclerotherapy with a mean of 2 mL NBC for control of bleeding. Outcome parameters were primary hemostasis （bleeding control within the first 48 h）, recurrent bleeding （after 48 h of esophagogastro-duodenoscopy） and in-hospital mortality were analyzed. RESULTS： The prevalence of GV in patients with portal hypertension was 15% （220/1436） and the incidence of bleeding was 22.7% （50/220）. Out of the 50 bleeding GV patients, isolated gastric varices （IGV-Ⅰ） were seen in 22 （44%）, gastro-oesophageal varices （GOV） on lesser curvature （GOV-Ⅰ） in 16 （32%）, and GOV on greater curvature （GOV-Ⅱ） in 15 （30%）. IGV-Ⅰ was seen in 44% （22/50） patients who had bleeding as compared to 23% （39/170） who did not have bleeding （P 〈 0.003）. Primary hernostasis was achieved with NBC in all patients. Re-bleeding occurred in 7 （14%） patients after 48 h of initial sclerotherapy. Secondary hemostasis was achieved with repeat NBC sclerotherapy in 4/7 （57%）. Three patients died after repeat sclerotherapy, one during transjugular intrahepatic portosystemic stem shunt （TIPSS）, one during surgery and one due to uncontrolled bleeding. Treatment failure-related mortality rate was 6% （3/50）. CONCLUSION： GV can be seen in 15% of patients with portal hypertension and the incidence of bleeding is 22.7%. NBC is highly effective in controlling GV bleeding. In hospital mortality of patients with bleeding GV is 6%.

Di-(n-butyl)-phthalate-induced Oxidative Stress and Depression-like Behavior in Mice with or without Ovalbumin Immunization

Objective To investigate the relationship between atopic allergy and depression and the role of DBP in the development of depression. Methods BALB/c mice were randomly divided into eight groups：saline;ovalbumin （OVA）-immunized;saline＋DBP （0.45 mg/kg·183;d）; saline＋DBP （45 mg/kg·d）; DBP （0.45 mg/kg·d） OVA-immunized; DBP （45 mg/kg·d） OVA-immunized; saline＋hydrocortisone （30 mg/kg·d）; and hydrocortisone （30 mg/kg·d）-exposed OVA-immunized. Behavior （e.g. open-field, tail suspension, and forced swimming tests）, viscera coefficients （brain and spleen）, oxidative damage [e.g. reactive oxygen species （ROS）, malondialdehyde （MDA）, and glutathione （GSH）], as well as levels of IgE and IL-4, were then analyzed. Results In the saline and OVA groups, the degree of depression symptoms in mice increased with increasing DBP concentration. Additionally, the OVA-immunity groups were associated with more serious depressive behavior compared with the same exposure concentration in the saline group. Oxidative damage was associated with a dose-dependent increase in DBP in the different groups. IL-4 and IgE levels were associated with low-dose DBP stimulation, which changed to high-dose inhibition with increasing DBP exposure, possibly due to spleen injury seen at high DBP concentrations.Conclusion Development of an atopic allergy has the potential to increase the risk of depression in mice, and it seems that DBP helps OVA to exert its effect in our present model. Moreover, the results of our study implicate a certain connection between brain oxidative stress and depression, which deserves a further exploration.

Preparation,Characterization of Dawson-type Heteropoly Acid Cerium（Ⅲ） Salt and Its Catalytic Performance on the Synthesis of n-Butyl Acetate

A novel cerium(Ⅲ) salt of Dawson type tungstophosphoric acid(Ce2P2W18O62·16H2O) was prepared by doping cerous nitrate in H6P2W18O62·13H2O powder and characterized by thermogravimetry and differential thermal analyses(TG/DTA),Fourier transform infrared spectroscopy(FT-IR),X-ray powder diffraction(XRD),pyridine infrared spectroscopy(Py-IR) and scanning electron microscopy(SEM).Its catalytic activity was evaluated by the probe reaction of synthesis of n-butyl acetate with acetic acid and n-butanol.The effects of various parameters such as molar ratio of n-butanol to acetic acid,reaction temperature,reaction time,and catalyst amount have been studied by single factor experiment.The results show that Ce2P2W18O62·16H2O behaved as an excellent heterogeneous catalyst in the synthesis of n-butyl acetate.The optimum synthetic conditions were determined as follows︰molar ratio of n-butanol to acetic acid at 2.0︰1.0,mass of the catalyst being 1.44% of the total reaction mixture,reaction temperature of 120 ℃ and reaction time of 150 min.Under above conditions,the conversion of acetic acid was above 97.8%.The selectivity of n-butyl acetate based on acetic acid was,in all cases,nearly 100%.The catalysts could be recycled and still exhibited high catalytic activity with 90.4% conversion after five cycles of reaction.It was found by means of TG-DTA and Py-IR that the catalyst deactivation was due to the adsorption of a complex of by-product on the active sites on catalysts surface or the catalyst loss in its separation from the products.Compared with using sulfuric acid as catalyst,the present procedure with Ce2P2W18O62·16H2O is a green productive technology due to simple process,higher yield,catalyst recycling and no corrosion for the production facilities.

Effects of di-n-butyl phthalate on male rat reproduction following pubertal exposure

Di-n-butyl phthalate （DBP） is an endocrine-disrupting chemical that has the potential to affect male reproduction. However, the reproductive effects of low-dose DBP are still not well known, especially at the molecular level. In the present study, pubertal male Sprague-Dawley rats were orally administered DBP at a wide range of doses （0.1, 1.0, 10, 100 and 500 mg kg^-1 day^-1） for 30 days. The selected end points included reproductive organ weights, testicular histopathology and serum hormonal levels. Additionally, proteomic analysis was performed to identify proteins that are differentially expressed as a result of exposure to DBP at low doses （0.1, 1.0 and 10 mg kg^-1 day^-1）. Toxic effects were observed in the high-dose groups, including anomalous development of testes and epididymides, severe atrophy of seminiferous tubules, loss of spermatogenesis and abnormal levels of serum hormones. Treatment with low doses of DBP seemed to exert a ＇stimulative effect＇ on the serum hormones. Proteomics analysis of rat testes showed 20 differentially expressed proteins. Among these proteins, alterations in the expression of HnRNPA2/B1, vimentin and superoxide dismutase 1 （SOD1） were further confirmed by Western blot and immunohistochemistry. Taken together, we conclude that high doses of DBP led to testicular toxicity, and low doses of DBP led to changes in the expression of proteins involved in spermatogenesis as well as changes in the number and function of Sertoli and Leydig cells, although no obvious morphological changes appeared. The identification of these differentially expressed proteins provides important information about the mechanisms underlying the effects of DBP on male rat reproduction.

Reactive Distillation for Producing n-Butyl Acetate:Experiment and Simulation

In this paper, a reactive distillation (RD) column was applied for synthesis n-butyl acetate from n-butanol and acetic acid. The Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetic model and an equilibrium stage model for separation were employed to study the RD process. The results obtained from the equilibrium stage model agreed well with the experiments. The effects of operating variables on the n-butanol conversion and n-butyl acetate purity were further investigated. The optimal column configuration for the production of n-butyl acetate was designed with 5 rectifying stages, 8 reaction stages and 13 stripping stages by the simulation study. According to the simulation results, n-butanol conversion and n-butyl acetate purity all reached greater than 96%.

Removal of a type of endocrine disruptors—di-n-butyl phthalate from water by ozonation

Ozonation of synthetic water containing a type of endocrine disruptor-di-n-butyl phthalate （DBP） was examined. Key impact factors such as pH, temperature, ionic strength, ozone dosage and initial DBP concentration were investigated. In addition, the activities of radicals on uncatalysed and catalysed ozonation were studied. The degradation intermediate products were followed and the kinetic of the ozonation were assessed as well. Results revealed that ozonation of DBP followed two mechanisms. Firstly, the reaction rate of direct ozonation was slower at lower pH, temperature, and ionic strength. Secondly, when these factors were increased for indirect radical reaction, higher percentage of DBP was removed with the increase of the initial ozone dosage and the decrease of the initial DBP concentration. In addition, tea-butanol, humic substances and Fe（Ⅱ） affected DBP ozonation through the radical pathway. It was determined that ozonation was restrained by adding tea-butanol for its radical inhibition effect. Furthermore, humic substances enhanced the reaction to some extent, but a slight negative effect would be encountered if the optimum dosage was exceeded. As a matter of fact, Mn（Ⅱ） affected the ozonation by ＂active sites＂ mechanism. In the experiment, three different kinds of intermediate products were produced during ozonation, but the amount of products for each one of them decreased as pH, temperature, ionic strength and initial ozone dosage increased. A kinetic equation of the reaction between ozone and DBP was obtained.

Reactive dividing-wall column for the co-production of ethyl acetate and n-butyl acetate

Reactive dividing-wall column(RDWC) technology plays a critical role in the energy saving and high efficiency of chemical process.In this article, the process of co-producing ethyl acetate(EA) and n-butyl acetate(BA) with RDWC was studied.BA was not only the product, but also acted as entrainer to remove the water generated by the two esterification reactions.Experiments and simulations of the co-production process were carried out.It was found that the experimental results were in good agreement with the simulation results.Two kinds of RDWC structures(RDWC-FC and RDWC-RS) were proposed, and the co-production process operating parameters of the two types of RDWC were optimized by Aspen Plus respectively.The optimal operating parameters of the RDWC-FC were determined as follows: 0.6 of the reflux ratio of aqueous phase(RR), 0.66 of the vapor split(R_V) and 0.51 of the liquid split(R_L).And the optimal operating parameters of the RDWC-RS were shown as follows: RR was 0.295 and R_V was 0.61.Furthermore, the energy saving analysis of the co-production process was based on the annual output of 10000 tons of EA, compared with the traditional reaction distillation(RD) to prepare EA and BA, the reboiler duty of the RDWC-FC column could save 20.4%, TAC saving 23.6%; RDWC-RS reboiler energy consumption could save 17.0%, TAC 22.2%.

Cerebral and splenic infarctions after injection of N-butyl-2-cyanoacrylate in esophageal variceal bleeding

Variceal bleeding is the most serious complication of portal hypertension,and it accounts for approximately one fifth to one third of all deaths in liver cirrhosis patients.Currently,endoscopic treatment remains the predominant method for the prevention and treatment of variceal bleeding.Endoscopic treatments include band ligation and injection sclerotherapy.Injection sclerotherapy with N-butyl-2-cyanoacrylate has been successfully used to treat variceal bleeding.Although injection sclerotherapy with N-butyl-2-cyanoacrylate provides effective treatment for variceal bleeding,injection of N-butyl-2-cyanoacrylate is associated with a variety of complications,including systemic embolization.Herein,we report a case of cerebral and splenic infarctions after the injection of N-butyl-2-cyanoacrylate to treat esophageal variceal bleeding.

Modeling phase equilibria of semiclathrate hydrates of CH_4,CO_2 and N_2 in aqueous solution of tetra-n-butyl ammonium bromide

Semiclathrate hydrates of tetra-n-butyl ammonium bromide （TBAB） offer potential solution for gas storage, transportation, separation of flue gases and CO2 sequestration. Models for phase equilibria for these systems have not yet been developed in open literatures and thus require urgent attention. In this work, the first attempt has been made to model phase equilibria of semiclathrate hydrates of CH4, CO2 and N2 in aqueous solution of TBAB. A thermodynamic model for gas hydrate system as proposed by Chen and Guo has been extended for semiclathrate hydrates of gases in aqueous solution of TBAB. A correlation for the activity of water relating to the system temperature, concentration of TBAB in the system and the nature of guest gas molecule has been proposed. The model results have been validated against available experimental data on phase equilibria of semiclathrate hydrate systems of aqueous TBAB with different gases as guest molecule. The extended Chen and Guo＇s model is found to be suitable to explain the promotion effect of TBAB for the studied gaseous system such as, methane, carbon dioxide and nitrogen as a guest molecule. Additionally, a correlation for the increase in equilibrium formation temperature （hydrate promotion temperature, ATp） of semiclathrate hydrate system with respect to pure gas hydrate system has been developed and applied to semiclathrate hydrate of TBAB with several gases as guest molecules. The developed correlation is found to predict the promotion effect satisfactorily for the system studied.

Vapor Pressure, Vaporization Enthalpy, Standard Enthalpy of Formation and Standard Entropy of n-Butyl Carbamate

The vapor pressures of n-butyl carbamate were measured in the temperature range from 372.37 K to 479.27 K and fitted with Antoine equation. The compressibility factor of the vapor was calculated with the Virial equation and the second virial coefficient was determined by the Vetere model. Then the standard enthalpy of vaporization for n-butyl carbamate was estimated. The heat capacity was measured for the solid state(299.39–324.2 K) and liquid state(336.65–453.21 K) by means of adiabatic calorimeter. The standard enthalpy of formation ΔfH[crystal(cr),298.15 K] and standard entropy S(crystal,298.15 K) of the substance were calculated on the basis of the gas-phase standard enthalpy of formation ΔfH(g,298.15 K)and gas-phase standard entropy S(g,298.15 K), which were estimated by the Benson method. The results are acceptable, validated by a thermochemical cycle.

N-butyl-2-cyanoacrylate, iso-amyl-2-cyanoacrylate and hypertonic glucose with 72% chromated glycerin in gastric varices

cyanoacrylate and a mixture of 72% chromated glycerinwith hypertonic glucose solution in management ofgastric varices.METHODS： Ninety patients with gastric varicespresented to Endoscopy Unit of Ain Shams UniversityHospital were included. They were randomly allocatedinto three groups; each group included 30 patients treatedwith intravariceal sclerosant injections in biweeklysessions till complete obturation of gastric varices;Group I （n-butyl-2-cyanoacrylate; Histoacryl？）, GroupII （iso-amyl-2-cyanoacrylate; Amcrylate？） and GroupIII （mixture of 72% chromated glycerin; Scleremo？with glucose solution 25%）. All the procedures wereperformed electively without active bleeding. Recruitedpatients were followed up for 3 mo.RESULTS： 26% of Scleremo group had bleeding duringpuncture vs 3.3% in each of the other two groups withsignificant difference, （P 〈 0.05）. None of Scleremogroup had needle obstruction vs 13.3% in each of theother two groups with no significant difference, （P 〉0.05）. Rebleeding occurred in 13.3% of Histoacryl andAmcrylate groups vs 0% in Scleremo group with nosignificant difference. The in hospital mortality was 6.6%in both Histoacryl and Amcrylate groups, while it was0% in Scleremo group with no significant difference. Inthe first and second sessions, the amount of Scleremoneeded for obturation was significantly high, while the amount of Histoacryl was significantly low. Scleremo was the less costly of the two treatments. CONCLUSION： All used sclerosant substances showed efficacy and success in management of gastric varices with no significant differences except in total amount,cost and bleeding during puncture.

Vapor-Liquid Equilibria for Dimethyl Carbonate-n-Butyl Acetate Binary System at 101.325kPa

The vapor-liquid equilibrium (VLE) data for the dimethyl carbonate-n-butyl acetate binary system were measured by an Ellis equilibrated distillator. The experimental data were checked for their thermodynamic consistency through statistical methods. The VLE data was correlated with Wilson and NRTL activity coefficient models and also with the calculation of the vapor phase fugacity coefficient by the modified Peng-Robinson equation of state.

Degradation of n-butyl xanthate using fly ash as heterogeneous Fenton-like catalyst

Heterogeneous Fenton-like process using fly ash as a catalyst was studied to degrade n-butyl xanthate form aqueous solution. The different reaction parameters on the degradation efficiency of the process were investigated. The fly ash/H2O2 catalyst possesses a high oxidation activity for n-butyl xanthate degradation in aqueous solution. It is found that both the dosage of catalyst and initial solution pH significantly affect the n-butyl xanthate conversion efficient. The results indicate that by using 1.176 mmol/L H2O2 and 1.0 g/L fly ash catalyst with mass fraction of 4.14% Fe(III) oxide at pH 3.0, almost 96.90% n-butyl xanthate conversion and over 96.66% COD removal can be achieved within 120 min with heterogeneous catalysis by fly ash. CS2 as an intermediate of n-butyl xanthate oxidation. Finally, it is demonstrated that the fly ash/H2O2 catalytic oxidation process can be an efficient method for the treatment of n-butyl xanthate containing wastewater.

Reactivity Ratios for Microemulsion Copolymeriration of N-butyl Maleimide and Styrene

The oil-in-water microemulsion containing N-butyl maleimide(NBMI. M_1) and styrene(St, M_2) was prepared. The complexation properties of NBMI and St in microemulsion were investigated by means of 1H-NMR. With the participation of charge-transfer complex(CTC). four reactivity ratios and the relative reactivity of free monomers and CTC were obtained. The result was compared with that measured by Mayo-Lewis method.

Synthesis,Characterization and Catalytic Application of H_3PW_(12)O_(40)/MCM-48 in the Esterification of Methacrylic Acid with n-butyl Alcohol

A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H3PW12O40/MCM-48 is an excellent catalyst for synthesizing n-butyl methacrylate and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）：n（n-butyl alcohol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.6, mass ratio of catalyst used to the reactants is 0.5% and reaction time is 2.0 h. Under these conditions, the yield of n-butyl methacrylate can reach 93.7%.