The molar enthalpies of dissolution for 2-（dinitromethylene）-5-methyl-1,3-diazacyclopentane（DNMDZ） in dimethyl sulfoxide（DMSO） and N-methyl pyrrolidone（NMP） were measured using an RD496-2000 Calvet microcalori...The molar enthalpies of dissolution for 2-（dinitromethylene）-5-methyl-1,3-diazacyclopentane（DNMDZ） in dimethyl sulfoxide（DMSO） and N-methyl pyrrolidone（NMP） were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure.Empirical formulae for the calculation of the molar enthalpies of dissolution（Δ diss H） were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP.The relationships between the rate constant（k） and the molality（b） and between the reaction order（n） and the molality（b） were determined.The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16（1-α） ^1.01 for the dissolution of DNMDZ in DMSO,and dα/dt=10^-2.02（1-α）^ 0.85 for the dissolution of DNMDZ in NMP,respectively.展开更多
High quality perovskite films with large columnar grains are greatly desired for efficient perovskite solar cells. Here, low volatility N-methyl-2-pyrrolidone(NMP) was added in MAI/IPA solution in a two-step spin-coat...High quality perovskite films with large columnar grains are greatly desired for efficient perovskite solar cells. Here, low volatility N-methyl-2-pyrrolidone(NMP) was added in MAI/IPA solution in a two-step spin-coating method, which promoted the conversion of lead iodide to perovskite. The perovskite films were annealed by a closed-steam annealing method to prolong the recrystallization process of perovskite films assisted by the residual NMP. It leaded to high quality CH_3NH_3PbI_3 perovskite films with large columnar grains due to its enhancement of the Oswald ripening. The large grain perovskite film leaded to efficient carrier transformation and injection, and low recombination. The photovoltaic performance of the perovskite solar cells was improved significantly.展开更多
Solid polymer electrolytes(SPEs)are one of the most promising alternatives to flammable liquid electrolytes for building safe Li metal batteries.Nevertheless,the poor ionic conductivity at room temperature(RT)and low ...Solid polymer electrolytes(SPEs)are one of the most promising alternatives to flammable liquid electrolytes for building safe Li metal batteries.Nevertheless,the poor ionic conductivity at room temperature(RT)and low resistance to Li dendrites seriously hinder the commercialization of SPEs.Herein,we design a bifunctional flame retardant SPE by combining hydroxyapatite(HAP)nanomaterials with Nmethyl pyrrolidone(NMP)in the PVDF-HFP matrix.The addition of HAP generates a hydrogen bond network with the PVDF-HFP matrix and cooperates with NMP to facilitate the dissociation of Li TFSI in the PVDF-HFP matrix.Consequently,the prepared SPE demonstrates superior ionic conductivity at RT,excellent fireproof properties,and strong resistance to Li dendrites.The assembled Li symmetric cell with prepared SPE exhibits a stable cycling performance of over 1200 h at 0.2 m A cm^(-2),and the solid-state LiFePO_4||Li cell shows excellent capacity retention of 85.3%over 600 cycles at 0.5 C.展开更多
N-methyl pyrrolidone,hydrochloric acid and thiourea dioxide were adopted as the raw material,and 4-methyl guanidine butyric acid was synthesized through two-step reaction.The optimum synthesis condition for the first ...N-methyl pyrrolidone,hydrochloric acid and thiourea dioxide were adopted as the raw material,and 4-methyl guanidine butyric acid was synthesized through two-step reaction.The optimum synthesis condition for the first step was as follows：n（N-methyl pyrrolidone）∶n（10% HCl）= 1∶2.0,reaction temperature 135 ℃,reaction time 5 h;at that moment,the yield of intermediate 4-methyl-amino butyric acid hydrochloride was 72.89%.The optimum synthesis condition for the second step was as follows：n（4-methyl-amino butyric acid hydrochloride）∶n（thiourea dioxide）= 1∶2.0,reaction temperature 25 ℃,reaction time 12 h,at that moment,the yield of target product was 82.68%.Structure characterization on the intermediates and the target products were carried out through Fourier transform infrared spectroscopy and elemental analysis.展开更多
基金Supported by the Science and Technology Foundation of the Science and Technology on Combustion and Explosion Laboratory of Xi’an Modern Chemistry Research Institute,China(No.9140C35030112OC3501)
文摘The molar enthalpies of dissolution for 2-（dinitromethylene）-5-methyl-1,3-diazacyclopentane（DNMDZ） in dimethyl sulfoxide（DMSO） and N-methyl pyrrolidone（NMP） were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure.Empirical formulae for the calculation of the molar enthalpies of dissolution（Δ diss H） were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP.The relationships between the rate constant（k） and the molality（b） and between the reaction order（n） and the molality（b） were determined.The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16（1-α） ^1.01 for the dissolution of DNMDZ in DMSO,and dα/dt=10^-2.02（1-α）^ 0.85 for the dissolution of DNMDZ in NMP,respectively.
基金financially supported by the National Natural Science Foundation of China(Grant No.21463002)Startup Funding of Distinguished Professorship of "1000 Talents Program"(31370086963030)+4 种基金Shenzhen Jiawei Photovoltaic Lighting Co.,Ltd.Tsinghua University Initiative Scientific Research Program(20161080165)Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2016D01C008)Opening Project of State Key laboratory of Crystal Material(No.KF1610)Scientific Research Program of the Higher Education Institution of Xinjiang(XJEDU2017M038)
文摘High quality perovskite films with large columnar grains are greatly desired for efficient perovskite solar cells. Here, low volatility N-methyl-2-pyrrolidone(NMP) was added in MAI/IPA solution in a two-step spin-coating method, which promoted the conversion of lead iodide to perovskite. The perovskite films were annealed by a closed-steam annealing method to prolong the recrystallization process of perovskite films assisted by the residual NMP. It leaded to high quality CH_3NH_3PbI_3 perovskite films with large columnar grains due to its enhancement of the Oswald ripening. The large grain perovskite film leaded to efficient carrier transformation and injection, and low recombination. The photovoltaic performance of the perovskite solar cells was improved significantly.
基金supported by the National Natural Science Foundation of China (Grant Nos.51604089,51874110,22173066,21903058)the Natural Science Foundation of Heilongjiang Province (Grant No.YQ2021B004)Open Project of State Key Laboratory of Urban Water Resource and Environment (Grant No.QA202138)。
文摘Solid polymer electrolytes(SPEs)are one of the most promising alternatives to flammable liquid electrolytes for building safe Li metal batteries.Nevertheless,the poor ionic conductivity at room temperature(RT)and low resistance to Li dendrites seriously hinder the commercialization of SPEs.Herein,we design a bifunctional flame retardant SPE by combining hydroxyapatite(HAP)nanomaterials with Nmethyl pyrrolidone(NMP)in the PVDF-HFP matrix.The addition of HAP generates a hydrogen bond network with the PVDF-HFP matrix and cooperates with NMP to facilitate the dissociation of Li TFSI in the PVDF-HFP matrix.Consequently,the prepared SPE demonstrates superior ionic conductivity at RT,excellent fireproof properties,and strong resistance to Li dendrites.The assembled Li symmetric cell with prepared SPE exhibits a stable cycling performance of over 1200 h at 0.2 m A cm^(-2),and the solid-state LiFePO_4||Li cell shows excellent capacity retention of 85.3%over 600 cycles at 0.5 C.
文摘N-methyl pyrrolidone,hydrochloric acid and thiourea dioxide were adopted as the raw material,and 4-methyl guanidine butyric acid was synthesized through two-step reaction.The optimum synthesis condition for the first step was as follows：n（N-methyl pyrrolidone）∶n（10% HCl）= 1∶2.0,reaction temperature 135 ℃,reaction time 5 h;at that moment,the yield of intermediate 4-methyl-amino butyric acid hydrochloride was 72.89%.The optimum synthesis condition for the second step was as follows：n（4-methyl-amino butyric acid hydrochloride）∶n（thiourea dioxide）= 1∶2.0,reaction temperature 25 ℃,reaction time 12 h,at that moment,the yield of target product was 82.68%.Structure characterization on the intermediates and the target products were carried out through Fourier transform infrared spectroscopy and elemental analysis.
