Suitable region of dynamic optimal interpolation for efficiently altimetry sea surface height mapping

The dynamic optimal interpolation(DOI)method is a technique based on quasi-geostrophic dynamics for merging multi-satellite altimeter along-track observations to generate gridded absolute dynamic topography(ADT).Compared with the linear optimal interpolation(LOI)method,the DOI method can improve the accuracy of gridded ADT locally but with low computational efficiency.Consequently,considering both computational efficiency and accuracy,the DOI method is more suitable to be used only for regional applications.In this study,we propose to evaluate the suitable region for applying the DOI method based on the correlation between the absolute value of the Jacobian operator of the geostrophic stream function and the improvement achieved by the DOI method.After verifying the LOI and DOI methods,the suitable region was investigated in three typical areas:the Gulf Stream(25°N-50°N,55°W-80°W),the Japanese Kuroshio(25°N-45°N,135°E-155°E),and the South China Sea(5°N-25°N,100°E-125°E).We propose to use the DOI method only in regions outside the equatorial region and where the absolute value of the Jacobian operator of the geostrophic stream function is higher than1×10^(-11).

Three dimensional shear wave velocity structure of crust and upper mantle in South China Sea and its adjacent regions by surface waveform inversion

We assembled approximately 328 seismic records. The data set was from 4 digitally recording long-period and broadband stations of CDSN. We carried out the inversion based on the partitioned waveform inversion (PWI). It partitions the large-scale optimization problem into a number of independent small-scale problems. We adopted surface waveform inversion with an equal block (2((2() discretization in order to acquire the images of shear velocity structure at different depths (from surface to 430 km) in the crust and upper-mantle. The resolution of all these anomalies has been established with (check-board( resolution tests. These results show significant difference in velocity, lithosphere and asthenosphere structure between South China Sea and its adjacent regions.

Prediction of Monthly Mean Surface Air Temperature in a Region of China

In conventional time series analysis, a process is often modeled as three additive components： linear trend, seasonal effect, and random noise. In this paper, we perform an analysis of surface air temperature in a region of China using a decomposition method in time series analysis. Applications to the National Centers for Environmental Prediction/the National Center for Atmospheric Research （NCEP/NCAR） Collaborative Reanalysis data in this region of China are discussed. The main finding was that the surface air temperature trend estimated for January 1948 to February 2006 was not statistically significant at 0.5904℃ （100 yr）^-1. Forecasting aspects are also considered.

The Regional Surface Heating Field over the Heterogeneous Landscape of the Tibetan Plateau Using MODIS and In Situ Data

In this study, a parameterization scheme based on Moderate Resolution Imaging Spectroradiometer （MODIS） data and in-situ data was tested for deriving the regional surface heating field over a heterogeneous landscape. As a case study, the methodology was applied to the whole Tibetan Plateau （TP） area. Four images of MODIS data （i.e., 30 January 2007, 15 April 2007, 1 August 2007, and 25 October 2007） were used in this study for comparison among winter, spring, summer, and autumn. The results were validated using the observations measured at the stations of the Tibetan Observation and Research Platform （TORP）. The results show the following： （1） The derived surface heating field for the TP area was in good accord with the land-surface status, showing a wide range of values due to the strong contrast of surface features in the area. （2） The derived surface heating field for the TP was very close to the field measurements （observations）. The APD （absolute percent difference） between the derived results and the field observations was 〈10%. （3） The mean surface heating field over the TP increased from January to April to August, and decreased in October. Therefore, the reasonable regional distribution of the surface heating field over a heterogeneous landscape can be obtained using this methodology. The limitations and further improvement of this method are also discussed.

Selection of Judging Indicators for Surface Morphology of Soil Crack under Different Development Degrees in Yuanmou Arid-Hot Valley Region

Quantification of complicated surface morphology of soil crack is a prerequisite and key to soil crack study. This paper takes soil crack quads in Yuanmou arid-hot valley region as examples, selecting several morphological indicators, and analyzes the soil crack＇s morphological features under various development degrees. By statistic analysis, three quantitative indicators for surface morphology are selected, namely soil crack area density, area weighted mean fractal dimension and connectivity index R, which can not only express the development intensity of soil cracks, but also effectively describe its morphological complexity and connectivity. The research results set a good base for the establishment of soil crack assessment system in Yuanmou arid-hot valley region.

Surface movement and deformation characteristics due to high- intensive coal mining in the windy and sandy region

As China＇s energy strategy moving westward, the surface movement and deformation characteristics due to high-intensive coal mining in the windy and sandy region become a research hotspot. Surface movement observation stations were established to monitor movement and deformation in one super-large working face. Based on field measurements, the surface movement and deformation characteristics were obtained, including angle parameters, subsidence prediction parameters, etc. Besides, the angle and subsidence prediction parameters in similar mining areas are summarized; the mechanism of surface movement and deformation was analyzed with the combination of key stratum theory, mining and geological conditions. The research also indicates that compared with conventional working faces, uniform subsidence area of the subsidence trough in the windy and sandy region is larger, the trough margins are relative steep and deformation values present convergence at the margins, the extent of the trough shrink towards the goaf and the influence time of mining activities lasts shorter; the overlying rock movement and breaking characteristics presents regional particularity in the study area, while the single key stratum, thin bedrock and thick sand that can rapidly propagate movement and deformation are the deep factors, contributing to it.

Improvement of Surface Albedo Simulations over Arid Regions

To improve the simulation of the surface radiation budget and related thermal processes in arid regions, three sophisticated surface albedo schemes designed for such regions were incorporated into the Biosphere- Atmosphere Transfer Scheme （BATS）. Two of these schemes are functions of the solar zenith angle （SZA）, where the first one has one adjustable parameter defined as SZA1 scheme, and the second one has two empirical parameters defined as SZA2 scheme. The third albedo scheme is a function of solar angle and soil water that were developed based on arid-region observations from the Dunhuang field experiment （DHEX） （defined as DH scheme）. We evaluated the performance of the original and newly-incorporated albedo schemes within BATS using the in-situ data from the Oasis System Energy and Water Cycle Field Experiment that was carried out in JinTa, Gansu arid area （JTEX）. The results indicate that a control run by the original version of the BATS generates a constant albedo, while the SZA1 and SZA2 schemes basically can reproduce the observed diurnal cycle of surface albedo, although these two schemes still underestimate the albedo when SZA is high in the early morning and late afternoon, and overestimate it when SZA is low during noontime. The SZA2 scheme has a better overall performance than the SZA1 scheme. In addition, BATS with the DH scheme slightly improves the albedo simulation in magnitude as compared to that from the control run, but a diurnal cycle of albedo is not produced by this scheme. The SZA1 and SZA2 schemes significantly increase the surface absorbed solar radiation by nearly 70 W m^-2, which further raises the ground temperature by 6 K and the sensible heat flux by 35 W m^-2. The increased solar radiation, heat flux, and temperature are more consistent with the observations that those from the control run. However, a significant improvement in these three variables is not found in BATS with the DH scheme due to the neglect of the diurnal cycle of albedo. Further analysis indicates that during cloudy days the solar radiation simulations of BATS with these three schemes are not in a good agreement with the observations, which implies that a more realistic partitioning of diffuse and direct radiation is needed in future land surface process simulations.

Implementation of a Surface Runoff Model with Horton and Dunne Mechanisms into the Regional Climate Model RegCM_NCC

A surface runoff parameterization scheme that dynamically represents both Horton and Dunne runoff generation mechanisms within a model grid cell together with a consideration of the subgrid-scaie soil heterogeneity, is implemented into the National Climate Center regional climate model （RegCM_NCC）. The effects of the modified surface runoff scheme on RegCMANCC performance are tested with an abnormal heavy rainfall process which occurred in summer 1998. Simulated results show that the model with the original surface runoff scheme （noted as CTL） basically captures the spatial pattern of precipitation, circulation and land surface variables, but generally overestimates rainfall compared to observations. The model with the new surface runoff scheme （noted as NRM） reasonably reproduces the distribution pattern of various variables and effectively diminishes the excessive precipitation in the CTL. The processes involved in the improvement of NRM-simulated rainfall may be as follows： with the new surface runoff scheme, simulated surface runoff is larger, soil moisture and evaporation （latent heat flux） are decreased, the available water into the atmosphere is decreased; correspondingly, the atmosphere is drier and rainfall is decreased through various processes. Therefore, the implementation of the new runoff scheme into the RegCMANCC has a significant effect on results at not only the land surface, but also the overlying atmosphere.

An overview of the spatial patterns of land surface processes over arid and semiarid regions

With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions have been investigated based on the ordinary Kriging interpolation approach. Generally, for the radiation processes, downward and upward short-wave radiation have a uniformly increasing trend with latitude, but the spatial patterns of long-wave radiation present notable regional differences: both upward and downward long-wave radiation increase with latitude in the west of North China, while in the east they vary inversely with latitude, suggesting surface temperature and clouds respectively have feedbacks to the long-wave radiation in the west and east of North China. The surface net radiation basically has a negative latitudinal trend. Long-wave radiation budget plays an important role in the spatial pattern of surface net radiation, particularly in the east of North China, although short-wave radiation budget largely determines the magnitude of surface net radiation. For the energy processes, latent and sensible heat flux varies conversely with latitude: more available land surface energy is consumed by evaporating soil water at lower latitudes while more is used for heating the atmosphere at higher latitudes. A soil heat flux maximum and minimum are found in Loess Plateau and Qinghai Plateau respectively, and a maximum is seen in the northeast China.

Assessment of Nitrogen Pollutant Sources in Surface Waters of Taihu Lake Region

The nitrogen （N） pollution status of the 12 most important rivers in Changshu, Taihu Lake region was investigated. Water samples were collected from depths of 0.5-1.0 m with the aid of the global positioning system （GPS）. The seasonal variations in the concentrations of different N components in the rivers were measured. Using tension-free monolith lysimeters and ^15N-labeled fertilizer, field experiments were carried out in this region to determine variations of iSN abundance of NO3^- in the leachate during the rice and wheat growing seasons, respectively. Results showed that the main source of N pollution of surface waters in the Taihu Lake region was not the N fertilizer applied in the farmland but the urban domestic sewage and rural human and animal excreta directly discharged into the water bodies without treatment. Atmospheric dry and wet N deposition was another evident source of N pollutant of the surface waters. In conclusion, it would not be correct to attribute the N applied to farmlands as the source of N pollution of the surface waters in this region.

Surface area processing in GIS for different mountain regions

Surface area is a fundamental parameter derived from terrain analysis in geographical information systems （GIS） for modeling the real world. Therefore, an evaluation of the techniques implemented by GIS models is important in order to obtain reliable area measurements. The study compares two raster-based methods with a TIN-based （triangulated irregular network） method for surface area approximation using a digital elevation model （DEM） with 25 m × 25 m resolution in six mountain regions of Shandong Province, China. Raster-based method I calculates surface-area grids from DEMs directly. Eight 3-dimensional triangles connecting the center point of each cell with the center points of the eight surrounding cells are generated and then the areas of the portions of each triangle that lay within the cell boundary are calculated and summed. Raster-based method Ⅱ produces the surface area of each cell directly from the pixel size and the slope value for the pixel. The results demonstrate that the surface areas calculated by rasterbased method I are equal to those of the TIN-based method. The results of raster-based method Ⅱ are the lowest but the difference in areas between the two raster-based methods decreases with the decrease in terrain complexity. Compared to the method with TINs, raster-based method II can do better because it has some advantages, such as neighborhood analysis, more consistent output and faster processing speed. The results also demonstrate that the difference between surface and horizontal areas should be considered if more than 30% of the area of a region has slopes steeper than 18.2 degrees.

Simulation analysis of regional surface mass anomalies inversion based on different types of constraints

Surface mass anomalies estimated by mass concentration(mascon)approach using Gravity Recovery and Climate Experiment(GRACE)observations with regularization constraints generally present higher spatial resolution than the spheric harmonic(SH)solutions.To analyze the influence of different types of constraints on the estimation of mascon solutions,we carried out a closed-loop simulation experiment to estimate surface mass anomalies over South America based on simulated GRACE intersatellite geopotential differences.Tikhonov regularization with spatial constraint(SC),uniform weighting constraint(UWC),and a prior information constraint(APC)were employed to stabilize the mascon solutions,and the corresponding optimal regularization parameters were determined based on the minimum residual root-mean-square(RMS)criterion.The results show that mascon solutions estimated under different types of constraints are consistent and equivalent when the optimal regularization parameters are selected.The spatial distributions and main characteristics of regional surface mass anomalies estimated by the three types of constraints agree well,and the values of residual RMS with different constraints are very close.But due to the smoothing effect of regularization,the signal strength of mascon solutions is a bit weaker than that of original true signal,especially in the regions with strong signals.In addition,due to the ill-conditioned problem is more serious for higher grid resolution,the relative contribution of the three types of constraints to the final mascon solutions would be stronger.The results show that the averages of relative contribution percentages of these constraints for 2°×2° mascon grids are 80%-90%,while the corresponding values for 4°×4° mascon grids are 30%-60%.However,based on the minimum residual RMS criterion,the accuracy of estimation results is not affected by the type of constraints and their relative contribution to the final mascon solutions.

Application of Remote Sensing Techniques and Geographic Information Systems to Analyze Land Surface Temperature in Response to Land Use/Land Cover Change in Greater Cairo Region, Egypt

The Greater Cairo Region (GCR), Egypt has experienced rapid urban expansion and broad development over the past several decades. Due to such development, this region faces many environmental consequences. In order to mitigate such consequences, it is essential to examine the historical change to measure the urban sprawl of GCR, and its effect on land surface temperature (LST). The objective of this study is to fulfill this goal. It does so by generating land use/land cover (LULC) maps derived from Landsat 5 TM for 1990 and 2003 and Landsat 8 OLI for 2016, using several classification techniques. A spectral radiance model and a web-based atmospheric correction model were used to successfully evaluate LST from thermal bands of Landsat data. Overall accuracy of Landsat derived land use data were 90.3%, 96.5% and 94.9% for years 1990, 2003 and 2016, respectively. The LULC change analysis revealed vegetation loss to urban land by an amount of 7.73% and from barren lands to urban uses by 8.70% within a 26-year timespan (1990-2016). This rapid urban growth significantly decreases vegetation areas, consequently increasing the LST and modifying the urban microclimate. Results from this study can help policy-makers characterize the evolution of urban construction for future developments.

Analysis on the Correlated Characteristics between Spring Precipitation in the Arid Region of Northwest China and Global Sea Surface Temperature

[Objective] The research aimed to study the correlated characteristics between spring precipitation in the arid region of Northwest China and global sea surface temperature. [Method] Based on GPCP global monthly precipitation data and NOAA ERSST sea surface temperature data during 1979-2008, the precipitation characteristics in the arid region of Northwest China in 30 years and its correlated distribution characteristics with the global sea surface temperature were analyzed by using the correlation and composite analysis methods. [Result] Spring rainfall presented the fluctuation increasing in the arid region of Northwest China during 1979-2008. The sea surface temperature of Indian Ocean in 15° S-22° N, 45°-105° E had the continuous influence on spring precipitation in the arid region of Northwest China. It could be as a stable factor for forecasting spring precipitation in the arid region zone of Northwest China. When the sea surface temperature was higher in Indian Ocean, Bay of Bengal and Arabian Sea, maybe spring precipitation in the arid region of Northwest China was more. If the sea surface temperature in the equatorial Eastern Pacific Ocean in prior summer, autumn and winter was higher, it was favorable for spring precipitation in the arid region of Northwest China in the next year. The sea surface temperature field in Arabian Sea, Central Indian Ocean and Western Pacific Ocean was the key factor which affected spring precipitation in the arid region of Northwest China. [Conclusion] The research provided the theory basis for the prediction and forecast of precipitation in the arid region.

Regional-scale Surface Air Temperature and East Asian Summer Monsoon Changes during the Last Millennium Simulated by the FGOALS-gl Climate System Model

The spatial patterns and regional-scale surface air temperature （SAT） changes during the last millennium,as well as the variability of the East Asian summer monsoon （EASM） were simulated with a low-resolution version of Flexible Global Ocean-Atmosphere-Land-Sea-ice （FGOALS-gl） model.The model was driven by both natural and anthropogenic forcing agents.Major features of the simulated past millennial Northern Hemisphere （NH） mean SAT variations,including the Medieval Climate Anomaly （MCA）,the Little Ice Age （LIA） and the 20th Century Warming （20CW）,were generally consistent with the reconstructions.The simulated MCA showed a global cooling pattern with reference to the 1961-90 mean conditions,indicating the 20CW to be unprecedented over the last millennium in the simulation.The LIA was characterized by pronounced coldness over the continental extratropical NH in both the reconstruction and the simulation.The simulated global mean SAT difference between the MCA and LIA was 0.14°C,with enhanced warming over high-latitude NH continental regions.Consistencies between the simulation and the reconstruction on regional scales were lower than those on hemispheric scales.The major features agreed well between the simulated and reconstructed SAT variations over the Chinese domain,despite some inconsistency in details among different reconstructions.The EASM circulation during the MCA was stronger than that during the LIA The corresponding rainfall anomalies exhibited excessive rainfall in the north but deficient rainfall in the south.Both the zonal and meridional thermal contrast were enhanced during the MCA.This temperature anomaly pattern favored a stronger monsoon circulation.

Influence of Rolling Temperature in Supercooled Liquid Region on the Surface Morphology of Zr_(52.5)Al_(10)Ni_(10)Cu_(15)Be_(12.5) Bulk Metallic Glass

Surface morphologies of Zr52.5 Al10 Ni10 Cu15 Be12.5 bulk metallic glass after being rolled at both a temperature around T9 and near （ Tx - 50） K were investigated with a scanning electron microscopy. Macroscopic and microscopic observation results show that squamae, cracks, steps and wedges exist on the surface when the samples were rolled at temperatures around Ty. However, a smooth and fiat surface appears when the samples were rolled at temperatures near （ Tx - 50） K. These results indicate that the mode of deformation in the supercooled liquid region is a partially homogeneous flow at a temperature around T9, and a fully homogeneous one at temperatures near （ Tx - 50） K. According to the results, it is more feasible to roll the amorphous alloys at temperatures near （ Tx - 50） K to obtain parts with smooth and fiat surface.

Effect of climatic change on surface environments in the typical region of Horqin Sandy Land

The town of Agura,a typical region in Horqin Sandy Land,was selected as the study area in this paper.Using 12 remote sensing images and climatic data from the past 20 years,the effects of climate change on surface environments were analyzed.The impact indices of climatic factors,along with their corresponding ranks,were used to characterize the responses of different types of surface environments to climate change.Results show that in the past 20 years,the surface environments of the study area have been deteriorating.Furthermore,there is a positive relationship between the changes in surface environments and those in climatic factors.Various climatic factors influence surface environments in different ways and at different levels.The most sensitive factor is relative humidity,followed by precipitation and evaporation.Overall,moisture is the key factor that affects the changes in surface environments of arid and semi-arid areas.

Regional warming induced by urban surface expansion in Shanghai

To detect the impacts of urban surface expansion on surface air temperature at 2-m（SAT） in Shanghai, China, nested numerical integrations based on satellite-derived urban data between the 1980 s and 2010 s were performed using the Weather Research and Forecasting（WRF） model. Urban surface expansion induced an annual-averaged warming of 0.31 °C from 1980 to 2016 across the whole of Shanghai, showing the greatest intensity between 2010 and 2016. The values were 0.36, 0.78, and 0.75 °C over grids that were classified as urban in both time periods（U2 U）, landuse grids that changed from non-urban to urban（N2 U）, and urban areas（including U2 U and N2 U）, respectively, and revealed weak warming over the inner-ring areas because the urban surfaces had been there since the 1980 s, whereas warming areas were coincident with the outward expansion of the urban surface. Meanwhile, marked seasonal variations could be detected, which were greater in spring and summer but less in autumn and winter. The approximately homogenously distributed SAT maximum（weaker） and heterogeneously SAT minimum（stronger） contributed to the decreased diurnal temperature range. Regional warming induced by urban surface expansion was approximately 0.12 °C per decade, which accounted for 19% of the overall warming across the whole of Shanghai. The values were 0.11 °C per decade and 0.39 °C per decade over U2 U and N2 U, which accounted for approximately 17% and 42% of the overall warming, respectively, and resulted in approximately 41% of the overall warming over urban areas.

Key regions where land surface processes shape the East Asian climate

Land-atmosphere interaction,as one of the key processes affecting the atmosphere and climate over East Asia,has drawn increasing attention during the past few decades.However,the current level of understanding regarding the mechanisms through which land surface processes impact the East Asian climate needs to be improved.Based on existing studies,six key regions where land surface processes affect the East Asian climate are proposed in this study,which can provide a valuable reference for future research into land-atmosphere interaction in East Asia.

S-wave velocity structure in Tangshan earthquake region and its adjacent areas from joint inversion of receiver functions and surface wave dispersion

Using the seismic records of 83 temporary and 17 permanent broadband seismic stations deployed in Tangshan earthquake region and its adjacent areas(39°N–41.5°N,115.5°E–119.5°E),we conducted a nonlinear joint inversion of receiver functions and surface wave dispersion.We obtained some detailed information about the Tangshan earthquake region and its adjacent areas,including sedimentary thickness,Moho depth,and crustal and upper mantle S-wave velocity.Meanwhile,we also obtained the vP/vS structure along two sections across the Tangshan region.The results show that:(1)the Moho depth ranges from 30 km to 38 km,and it becomes shallower from Yanshan uplift area to North China basin;(2)the thickness of sedimentary layer ranges from 0 km to 3 km,and it thickens from Yanshan uplift region to North China basin;(3)the S-wave velocity structure shows that the velocity distribution of the upper crust has obvious correlation with the surface geological structure,while the velocity characteristics of the middle and lower crust are opposite to that of the upper crust.Compared with the upper crust,the heterogeneity of the middle and lower crust is more obvious;(4)the discontinuity of Moho on the two sides of Tangshan fault suggests that Tangshan fault cut the whole crust,and the low vS and high vP/vS beneath the Tangshan earthquake region may reflect the invasion of mantle thermal material through Tangshan fault.