The effects of interface shape on stress wave distribution and attenuation were investiga- ted using finite element method （ FEM ）. The simulation results indicate that when the stress wave propagates from SiC ceram...The effects of interface shape on stress wave distribution and attenuation were investiga- ted using finite element method （ FEM ）. The simulation results indicate that when the stress wave propagates from SiC ceramic to A1 alloy, the tensile stress decreases and the attenuation coefficient of the stress wave increases with increasing central angle of the concave interface between SiC and A1. But for the convex interface, the tensile stress increases and attenuation coefficient decreases with increasing central angle. As the stress wave propagates from A1 alloy to SiC ceramic, the atten- uation coefficient of stress wave decreases with increasing the central angle of the concave interface. For the convex interface, the attenuation coefficient increases with increasing central angle.展开更多
This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this...This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this purpose, a semi discrete variational format relative time and a fully discrete FVE format for the 2D hyperbolic equations are built, and a set of snapshots from the very few FVE solutions are extracted on the first very short time interval. Then, the POD basis from the snapshots is formulated, and the reduced-order POD extrapolating FVE format containing very few degrees of freedom but holding sufficiently high accuracy is built. Next, the error estimates of the reduced-order solutions and the algorithm procedure for solving the reduced-order for- mat are furnished. Finally, a numerical example is shown to confirm the correctness of theoretical conclusions. This means that the format is efficient and feasible to solve the 2D hyperbolic equations.展开更多
针对以太网无源光网络的网络规划和算法研究,在IEEE802.3ah标准的基础上,通过扩展开源网络模拟程序Network Simulator Version 2(NS2),完成对以太网无源光网络(EPON)的建模与测试,实现了光网络单元(ONU)注册、测距、带宽分配、服务质量(...针对以太网无源光网络的网络规划和算法研究,在IEEE802.3ah标准的基础上,通过扩展开源网络模拟程序Network Simulator Version 2(NS2),完成对以太网无源光网络(EPON)的建模与测试,实现了光网络单元(ONU)注册、测距、带宽分配、服务质量(QoS)等诸多功能,为EPON网络规划和算法研究提供了一个全面完整的仿真平台(EPONns).注册过程模拟给出成功注册的ONU数目与注册窗口值的关系;光传输线路终端(OLT)负载状况检测反映出EPONns在高负荷下的状态.展开更多
We investigate the dependence of the switching process on the perpendicular magnetic anisotropy （PMA） constant in perpendicular spin transfer torque magnetic tunnel junctions （P-MTJs） using micromagnetic simulatio...We investigate the dependence of the switching process on the perpendicular magnetic anisotropy （PMA） constant in perpendicular spin transfer torque magnetic tunnel junctions （P-MTJs） using micromagnetic simulations. It is found that the final stable states of the magnetization distribution of the free layer after switching can be divided into three different states based on different PMA constants： vortex, uniform, and steady. Different magnetic states can be attributed to a trade-off among demagnetization, exchange, and PMA energies. The generation of the vortex state is also related to the non-uniform stray field from the polarizer, and the final stable magnetization is sensitive to the PMA constant. The vortex and uniform states have different switching processes, and the switching time of the vortex state is longer than that of the uniform state due to hindrance by the vortex.展开更多
基金Supported by the National Basic Research Program of China("973" Program)(613135)
文摘The effects of interface shape on stress wave distribution and attenuation were investiga- ted using finite element method （ FEM ）. The simulation results indicate that when the stress wave propagates from SiC ceramic to A1 alloy, the tensile stress decreases and the attenuation coefficient of the stress wave increases with increasing central angle of the concave interface between SiC and A1. But for the convex interface, the tensile stress increases and attenuation coefficient decreases with increasing central angle. As the stress wave propagates from A1 alloy to SiC ceramic, the atten- uation coefficient of stress wave decreases with increasing the central angle of the concave interface. For the convex interface, the attenuation coefficient increases with increasing central angle.
基金Project supported by the National Natural Science Foundation of China(Nos.11271127 and11671106)
文摘This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this purpose, a semi discrete variational format relative time and a fully discrete FVE format for the 2D hyperbolic equations are built, and a set of snapshots from the very few FVE solutions are extracted on the first very short time interval. Then, the POD basis from the snapshots is formulated, and the reduced-order POD extrapolating FVE format containing very few degrees of freedom but holding sufficiently high accuracy is built. Next, the error estimates of the reduced-order solutions and the algorithm procedure for solving the reduced-order for- mat are furnished. Finally, a numerical example is shown to confirm the correctness of theoretical conclusions. This means that the format is efficient and feasible to solve the 2D hyperbolic equations.
文摘针对以太网无源光网络的网络规划和算法研究,在IEEE802.3ah标准的基础上,通过扩展开源网络模拟程序Network Simulator Version 2(NS2),完成对以太网无源光网络(EPON)的建模与测试,实现了光网络单元(ONU)注册、测距、带宽分配、服务质量(QoS)等诸多功能,为EPON网络规划和算法研究提供了一个全面完整的仿真平台(EPONns).注册过程模拟给出成功注册的ONU数目与注册窗口值的关系;光传输线路终端(OLT)负载状况检测反映出EPONns在高负荷下的状态.
基金Project supported by the National Natural Science Foundation of China(Grant No.61332003)the Natural Science Foundation of Hunan Province,China(Grant No.2015JJ3024)
文摘We investigate the dependence of the switching process on the perpendicular magnetic anisotropy （PMA） constant in perpendicular spin transfer torque magnetic tunnel junctions （P-MTJs） using micromagnetic simulations. It is found that the final stable states of the magnetization distribution of the free layer after switching can be divided into three different states based on different PMA constants： vortex, uniform, and steady. Different magnetic states can be attributed to a trade-off among demagnetization, exchange, and PMA energies. The generation of the vortex state is also related to the non-uniform stray field from the polarizer, and the final stable magnetization is sensitive to the PMA constant. The vortex and uniform states have different switching processes, and the switching time of the vortex state is longer than that of the uniform state due to hindrance by the vortex.
