The Middle and Lower Cambrian salt tectonics in the central Tarim Basin,China:A case study based on strike-slip fault characterization

Due to the considerable depth of the salt layers and the lack of calibration by exploratory drilling,the interpretation of the Middle and Lower Cambrian salt formations in the central Tarim Basin poses a challenge.In this paper,we apply the coupling and decoupling deformation theory in salt tectonics to analyze the No.7 fault mapped in the seismic datasets by the response characteristics of the Middle and Lower Cambrian layers.By quantifying the stratigraphic framework of the Middle and Lower Cambrian strata,we define the position of the salt layer with the seismic data.Structural decoupling is observed in the Middle and Lower Cambrian sequences in the Shuntuoguole Low Uplift,while deformation coupling is observed in these two sequences in the Shaya Uplift.

Tensile Fractures and in situ Stress Measurement Data Constraints on Cretaceous-Present Tectonic Stress Field Evolution of the Tanlu Fault Zone in Shandong Province,North China Craton

Tectonic stress fields are the key drivers of tectonic events and the evolution of regional structures.The tectonic stress field evolution of the Tanlu fault zone in Shandong Province,located in the east of the North China Craton(NCC),may have preserved records of the NCC’s tectonic history.Borehole television survey and hydraulic fracturing were conducted to analyze the paleo and present tectonic stress fields.Three groups of tensile fractures were identified via borehole television,their azimuths being NNW-SSE,NW-SE and NE-SW,representing multiple stages of tectonic events.Hydraulic fracturing data indicates that the study region is experiencing NEE-SWW-oriented compression and nearly-N-Soriented extension,in accordance with strike-slip and compression.Since the Cretaceous,the orientation of the extensional stress has evolved counterclockwise and sequentially from nearly-NW-SE-oriented to NE-SW-oriented and even nearly N-S-oriented,the stress state having transitioned from strike-slip-extension to strike-slip-compression,in association with the rotating and oblique subduction of the Pacific Plate beneath the NCC,with the participation of the Indian Plate.

A DISCUSSION ON THE STRUCTURE AND TECTONIC EVOLUTION OF THE ALTUN OROGENIC ZONE

The Altun faulted Zone has been focused by lots of geologists for many years because it lies in a boundary area of several main tectonic units in the western China and is a geographically northern boundary line of Tibet plateau.The latest achievements show that the Altun faulted zone is not only a Cenozoic strike\|slip faulted system but also an orogenic zone which underwent mutually subduction\|collision among paleo\|plates (or terrains) in its early stage and consists of geological bodies of different ages and tectonic environments. Based on the results of geological characteristics,petrology, geochemistry and isotopic dating, the Altun Orogenic Zone can be divided into four tectonic units and is considered to have undergone five stages during its tectonic evolution.The four tectonics units are :(1) Abei metamorphic block, which consists of Archean metamorphic complex of granulite facies;.(2) Hongliugou—Lapeiquan tectonic melange belt, which is composed of ophiolite blocks(belt), OIB blocks, pelagic silicalite, shallow\|bathyal sedimentary rock blocks and high\|pressure metamorphi c rock blocks. (3) Milanhe—Jinyanshan island\|arc block, which consists of mid\|uplifting belt and the south and north active margins. The uplifting belt is composed of metasandstone, marble, overlying thick stromatolite (Jinyanshan Group of Jixian System). Metamorphic rocks of 450Ma occur in both south and north hactive margin. Post\|collision bimodal volcanic rocks and A\|type granite occur in the middle and the north side.(4) Apa—Mangya tectonic melange belt, which consists of ophiolite(including ultramafic rocks, gabbro, plagiogranite and basalt) and flysch and eclogite of late Ordovician.

Tectonic Taphrogenesis and Paleoseismic Records from the Yishu Fault Zone in the Initial Stage of the Caledonian Movement

The Yishu fault zone （mid-segment of the Tanlu fault zone） was formed in the Presinian. Periodic tectonic activities and strong seismic events have occurred along the fault zone. During the initial stage of the Caledonian Movement, with the proceeding of the marine transgression from the Yishu paleo-channel to the western Shandong, uneven thick sediments, composed mainly of sand, mud and carbonates of littoral, lagoon, and neritic facies, were deposited in the Yishu fault zone and western Shandong, and constructed the bottom part of the Lower Cambrian consisting of the Liguan and Zhushadong formations. Through field observations and the lab-examinations, various paleoseismic records have been discovered in the Liguan Formation and the Zhushadong Formations of the Yishu fault zone and its vicinity, including some layers with syn-sedimentary deformation structures that were triggered by strong earthquakes （i.e. seismite, seismo-olistostrome, and seismo-turbidite）. Paleoseismic records developed in the Zhushadong Formation are mainly seismites with soft-sediment deformation structures, such as liquefied diapir, small liquefied-carbonate lime-mud volcano, liquefied vein, liquefied breccia, convolute deformation （seismic fold）, graded fault, soft siliceous vein, and deformation stromatolite, as well as seismites with brittle deformation structures of semiconsolidated sediments. Paleoseismic records preserved in the Liguan Formation are not only seismo-olistostrome with a slump fold, load structure, and ball-and-pillows, but also seismo-turbidite with convolution bedding, graded bedding and wavy-bedding. However, in the western Shandong area, the closer to the Yishu fault zone, the greater the thickness of the Liguan Formation and the Zhushadong Formation, the greater the number and type of layers with paleoseismic records, and the higher the earthquake intensity reflected by associations of seismic records. This evidence indicates that tectonic taphrogenesis accompanied by strong earthquake events occurred in the Yishu fault zone during the initial stage of the Caledonian Movement, which embodied the break-up of the Sino-Korean Plate along the Paleo-Tanlu fault zone at that time.

Global kinematics of tectonic plates and subduction zones since the late Paleozoic Era

Detailed global plate motion models that provide a continuous description of plate boundaries through time are an effective tool for exploring processes both at and below the Earth's surface. A new generation of numerical models of mantle dynamics pre-and post-Pangea timeframes requires global kinematic descriptions with full plate reconstructions extending into the Paleozoic(410 Ma). Current plate models that cover Paleozoic times are characterised by large plate speeds and trench migration rates because they assume that lowermost mantle structures are rigid and fixed through time. When used as a surface boundary constraint in geodynamic models, these plate reconstructions do not accurately reproduce the present-day structure of the lowermost mantle. Building upon previous work, we present a global plate motion model with continuously closing plate boundaries ranging from the early Devonian at 410 Ma to present day.We analyse the model in terms of surface kinematics and predicted lower mantle structure. The magnitude of global plate speeds has been greatly reduced in our reconstruction by modifying the evolution of the synthetic Panthalassa oceanic plates, implementing a Paleozoic reference frame independent of any geodynamic assumptions, and implementing revised models for the Paleozoic evolution of North and South China and the closure of the Rheic Ocean. Paleozoic(410-250 Ma) RMS plate speeds are on average ～8 cm/yr, which is comparable to Mesozoic-Cenozoic rates of ～6 cm/yr on average.Paleozoic global median values of trench migration trend from higher speeds(～2.5 cm/yr) in the late Devonian to rates closer to 0 cm/yr at the end of the Permian(～250 Ma), and during the Mesozoic-Cenozoic(250-0 Ma) generally cluster tightly around ～1.1 cm/yr. Plate motions are best constrained over the past 130 Myr and calculations of global trench convergence rates over this period indicate median rates range between 3.2 cm/yr and 12.4 cm/yr with a present day median rate estimated at～5 cm/yr. For Paleozoic times(410-251 Ma) our model results in median convergence rates largely～5 cm/yr. Globally,～90% of subduction zones modelled in our reconstruction are determined to be in a convergent regime for the period of 120-0 Ma. Over the full span of the model, from 410 Ma to 0 Ma,～93% of subduction zones are calculated to be convergent, and at least 85% of subduction zones are converging for 97% of modelled times. Our changes improve global plate and trench kinematics since the late Paleozoic and our reconstructions of the lowermost mantle structure challenge the proposed fixity of lower mantle structures, suggesting that the eastern margin of the African LLSVP margin has moved by as much as ～1450 km since late Permian times(260 Ma). The model of the plate-mantle system we present suggests that during the Permian Period, South China was proximal to the eastern margin of the African LLSVP and not the western margin of the Pacific LLSVP as previous thought.

Kinematic History and Changes in the Tectonic Stress Regime during the Cenozoic along the Qinling and Southern Tanlu Fault Zones

Since the mid-late Eocene, North China has been subjected to extensional stress, resulting in the formation and development of basins. The dynamic origin of this crustal extension has long been an issue of debate. This paper presents the results of kinematic analyses of faults obtained from two seperated areas in North China. In the Weihe graben situated on the southernmost margin of the Ordos block, analyses of fault kinematics were coupled with an analysis of the basin's subsidence history. Three successive extensional tectonic phases accompaning the basin's formation and development have been distinguished. The Palaeogene extension was oriented in a WNW-ESE direction; the Neogene extension in a NE-SW direction and the Pliocene-Quaternary extension in a NW-SE direction. Such changes have also been recorded by fault kinematics along the southern Tanlu fault zone. This has been demonstrated by three successive sets of fault striations indicating normal dip slip resulting from NW-SE extension, then left-lateral slip with a normal component resulting from NE-SW extension, and right-lateral slip with a minor normal component, respectively. The kinematic history of faults and their chronological evolution indicate changes in continental dynamics acting in North China over Cenozoic time.

Characteristics of Blueschist in Shuangjiang Tectonic Mélange Zone,West Yunnan Province

Glaucophane in Shuangjiang area, West Yunnan Province, supplies a chance for studying south segment of Lancangjiang tectonic zone. But people are at odds as to whether two stage glaucophane exists or not, glaucophane is the result of dynamic metamorphism later, or indicates a high P/T metamorphic belt when Paleozoic Tethys Sea closed. Authors discover in a recent research that there is only one stage glaucophane in Shuangjiang area, and three blueschist belts are distributed near N S tending, and glaucophane in Shuangjiang area is related to the eastward subduction of Changning Menglian basin.

The Ductile Deformation Characteristics of Caledonian Intracontinental Orogeny in the Northeastern Jiangshan-Shaoxing Tectonic Zone:Insights from Magnetic Fabric Study and Its Geodynamic Implication

The Jiangshan-Shaoxing tectonic zone was the northeastern boundary between the Yangtze Block and the Cathaysia Block during the Neoproterozoic and was an intracontinental orogenic belt during late of the early Paleozoic. In this tectonic zone, there develops a lot of mylonite underwent strong ductile deformation and schist, gneiss, and amphibolite with medium and high grade metamorphism which was formed during the late of early Paleozoic. The research of geometry and kinematic of ductile deformation in Jiangshan-Shaoxing tectonic zone is very important to reveal the tectonic process of intracontinental orogeny. This paper uses the anisotropy of magnetic susceptibility （AMS） to determine the ductile deformation geometry and kinematic of Jiangshan-Shaoxing tectonic zone combing with the field survey. In this study, 190 specimens of 19 locations and 221 specimens of 23 locations from Wangjiazhai section and Lipu-Sizhai section were analyzed. The magnetic foliation over magnetic lineation in both Wangjiazhai and Lipu-Sizhai sections together with the field observations indicated a compressional deformation pattern. 3 and 4 strong ductile deformation zones can be established in the Wangjiazhai section and the Lipu-Sizhai section, respectively. According to the magnetic fabric and petro-fabric studies, the Northeastern Jiangshan-Shaoxing tectonic zone suffered two kinds of deformation patterns during the late early Paleozoic, i.e., the thrusting deformation followed by sinistral shear deformation.

Geochemistry and Zircon U–Pb–Hf Isotopic Systematics of the Sanchahe Quartz Monzonite Intrusion in the North Qinling Tectonic Zone, Central China: Implications for its Petrogenesis and Tectonic Setting

The Sanchahe quartz monzonite intrusion is situated in the middle segment of the North Qinling tectonic belt, Central China mainland, and consists chiefly of sanukitoid–like and granodioritic-monzogranitic rocks. The sanukitoid–like rocks are characterized by quartz monzonites, which display higher Mg#（55.0–59.0）, and enrichments in Na2 O＋K2 O（7.28–8.94 %）, Ni（21-2312 ppm）, Cr（56-4167 ppm）, Sr（553-923 ppm）, Ba（912-1355 ppm） and LREE（（La/Yb）N =9.47–15.3）, from negative to slightly positive Eu anomalies（δEu=＋0.61 to ＋1.10）, but also depletion in Nb, Ta and Ti. The granodioritic-monzogranitic rocks diaplay various Mg#of 6.00-53.0, high Na2 O＋K2 O（7.20– 8.30%）, Sr（455–1081 ppm） and（La/Yb）N（27.6–47.8）, with positive Eu anomalies（δEu=1.03–1.57） and depleted Nb, Ta and Ti. Laser ablation inductively coupled plasma mass spectrometry（LA-ICPMS） zircon U-Pb isotopic dating reveals that the sanukitoid-like rocks were emplaced at two episodes of magmatism at 457±3 Ma and 431±2 Ma, respectively. The monzogranites were emplaced at 445±7Ma. Sanukitoid–like rocks have their εHf（t） values ranging from ＋0.3 to ＋15.1 with Hf–depleted mantle model ages of 445 to 1056 Ma, and the monzogranite shows its εHf（t） values ranging from 21.6 to ＋10.8 with Hf–depleted mantle model ages of 635 to 3183 Ma. Petrological, geochemical and zircon Lu –Hf isotopic features indicate that the magmatic precursor of sanukitoid–like rocks was derived from partial melting of the depleted mantle wedge materials that were metasomatized by fluids and melts related to subduction of oceanic slab, subsequently the sanukitoid magma ascended to crust level. This emplaced mantle magma caused partial melting of crustally metamorphosed sedimentary rocks, and mixing with the crustal magma, and suffered fractional crystallization, which lead to formations of quartz monzonites. However, the magmatic precursor of the granodioritic-monzogranitic rocks were derived from partial melting of subducted oceanic slab basalts. Integrated previous investigation for the adackitic rocks in the south of the intrusion, the Sanchahe intrusion signed that the North Qinling tectonic zone was developed in an early Paleozoic transitionally tectonic background from an island arc to back–arc.

The seismicity and tectonic stress field characteristics of the Longmenshan fault zone before the Wenchuan M_S8.0 earthquake

The seismicity of Longrnenshan fault zone and its vicinities before the 12 May 2008 Wenchuan Ms8.0 earthquake is studied. Based on the digital seismic waveform data observed from regional seismic networks and mobile stations, the focal mechanism solutions are determined. Our analysis results show that the seismicities of Longmenshan fault zone before the 12 May 2008 Wenchuan earthquake were in stable state. No obvious phenomena of seismic activity intensifying appeared. According to focal mechanism solutions of some small earthquakes before the 12 May 2008 Wenchuan earthquake, the direction of principal compressive stress P-axis is WNW-ESE. The two hypocenter fault planes are NE-striking and NW-striking. The plane of NE direction is among N50°-70°E, the dip angles of fault planes are 60°-70° and it is very steep. The faultings of most earthquakes are dominantly characterized by dip-slip reverse and small part of faultings present strike-slip. The azimuths of principal compressive stress, the strikes of source fault planes and the dislocation types calculated from some small earthquakes before the 12 May 2008 Wenchuan earthquake are in accordance with that of the main shock. The average stress field of micro-rupture along the Longmenshan fault zone before the great earthquake is also consistent with that calculated from main shock. Zipingpu dam is located in the east side 20 km from the initial rupture area of the 12 May 2008 Wenchuan earthquake. The activity increment of small earthquakes in the Zipingpu dam is in the period of water discharging. The source parameter results of the small earthquakes which occurred near the initial rupture area of the 12 May 2008 Wenchuan earthquake indicate that the focal depths are 5 to 14 km and the source parameters are identical with that of earthquake.

Rules of distribution in a plastic zone of rocks surrounding a roadway affected by tectonic stress

In order to study the rules of distribution in a plastic zone of rocks, surrounding a roadway, affected by tectonic stress, we first analyzed the mechanics of a roadway affected by tectonic stress and derived a theoretical formula for the plastic zone of rocks surrounding a roadway. We also analyzed the distribution characteristics of the plastic zone under different levels of tectonic stress, vertical pressure, cohesion and friction angle of the surrounding rock. Secondly, we used numerical simulation to analyze the range and shape features of the plastic zone of rocks surrounding the roadway, given different tectonic stress levels. Finally we used a rock drilling detector to carry out field measurements on the broken state of rock surrounding the roadway at the –700 substation and channels in the Xinzhuang mine of the Shenhuo mining area. Given the measured ground stress, we analyzed the relationship between tectonic stress and the distribution of this plastic zone. Our results show that the range of the plastic zone at the top and bottom of the roadway increases with an increase in tectonic stress and this increase is especially obvious at the roadway corner.

Tectonic boundaries in the South China Sea from aeromagnetic signature

Magnetic data has been widely applied in the tectonic division.High-resolution magnetic data were used to analyze the geotectonic zoning of the South China Sea.Based on the newly compilated magnetic data,the processing results and the distribution of known faults,we consider that the U-shaped line approximately along the South China Sea national boundary of China shown in the magnetic map is a significant geological and geophysical boundary.We first described the linear characteristics of the magnetic data and then applied pseudo-gravity,Euler deconvolution,tilt derivatives,and the texture segmentation method to process the data.Results show that the dividing line between the South China Sea and the surrounding blocks is approximately along this U-shaped line.The dividing line between the South China domain and the South China Sea domain is along with the Dongsha Islands to Xisha Trough,which is different from the previous geophysical zoning results.Our results are almost consistent with those of the gravity data indicating roughly the tectonic zonation along the U-shaped line.

Tectonic implication of geomorphometric analyses along the Saravan Fault: evidence of a difference in tectonic movements between the Sistan Suture Zone and Makran Mountain Belt

In this paper, remote sensing techniques,as well as field studies, have been used to investigate the geomorphological processes and landscape evolution along the Saravan Fault, SE Iran to highlight how topographic features were influenced by active tectonics. Quantitative geomorphic analysis was carried out using mountain-front sinuosity(Smf),valley floor width-valley height ratio(Vf), drainage basin asymmetry factor(Af), Hypsometric integral(Hi), drainage basin shape index(Bs), mean axial slope of channel(MASC), standard deviation of topography(STD) and index of active tectonic(Iat).Remote sensing techniques, as well as field studies revealed that the Saravan Fault have three parts trending N-S, NW-SE, and E-W. Obtained results show that basins with high Iat index are located at where the strike of the Saravan Faults changes and where several strike-slip faults are crossed the Saravan fault.

2-D P-wave velocity structure in the mideast segment of Zhangjiakou-Bohai tectonic zone: Anxin-Xianghe-Kuancheng DSS profile

In order to get the 3-D fine velocity structure in the Capital-circle area of China, 6 explosions, ranging from 1800 to 2500 kg, were conducted and recorded by an array of 240 seismographs. A reflection/refraction survey was carried out along the profile extending from Anxin county, Hebei Province northeastward to Yanshan Mountains, crossing the Zhangjiakou-Bohai tectonic zone. The 2-D velocity structure of P wave was imaging along the profile. The results show that abnormality exists in the deep structure of the Zhangjiakou-Bohai tectonic zone: The base- ment is significantly depressed, the interfaces and Moho are uplifted, and a strong velocity gradient layer is existed above the Moho that may be dislocated by deep fault. The crust of Huabei basin is thin and low velocity body ex- ists in the crust. The Yanshan Mountains′ crust is thick, the layers in the crust are quite clear and the velocity in the layer is homogeneous. Huabei basin differs from Yanshan Mountains in structure.

Tectonic Dynamic Metallization of Silver-GoldHydrothermal Fluids in Proterozoic GneissTerrene Shear Zones, Suichang, Zhejiang, China

The Suichang mine is the largest silicified vein-type silver-gold mineralization system in Southeast China, whose ore bodies are controlled by shear zones developing in Lower Proterozoic gneiss terrene with initial migmatization, which is covered by Upper Jurassic and Lower Cretaceous volcanic rock system and cut by acidic igneous veins of Jurassic and Cretaceous. The conclusions are as follows: (1) The ore-forming fluid is defined as superhigh tectonic-metamorphic fluid on the base of : 1 (D)-(18O) values 2 fluid inclusions;3 trace elements of pyrite from ores. (2) The shear zone silicified orebod-ies occurred in proterozoic, Jurassic and Cretaceous, which have been transforms in part by ore-bearing comb quartz vein of volcanism.

Magnetic fabrics in characterization of magma emplacement and tectonic evolution of the Moyar Shear Zone,South India

The Moyar Shear Zone （MSZ） of the South Indian granulite terrain hosts a prominent syenite pluton （-560 Ma） and associated NW-SE to NE-SW trending mafic dyke swarm （-65 Ma and 95 Ma）. Preliminary magnetic fabric studies in the mafic dykes, using Anisotropy of Magnetic Susceptibly （AMS） studies at low-field, indicate successive emplacement and variable magma flow direction. Magnetic lineation and foliation in these dykes are identical to the mesoscopic fabrics in MSZ mylonites, indicating shear zone guided emplacement. Spatial distribution of magnetic lineation in the dykes suggests a common conduit from which the source magma has been migrated. The magnetic foliation trajectories have a sigmoidal shape to the north of the pluton and curve into the MSZ suggesting dextral sense of shear. Identical fabric conditions for magnetic fabrics in the syenite pluton and measured field fabrics in mylonite indicate syntectonic emplacement along the Proterozoic crustal scale dextral shear zone with repeated reactivation history.

Geochemistry and Petrogenesis of Volcanic Rocks from the Continent-Ocean Transition Zone in Northern South China Sea and Their Tectonic Implications

Miocene–Pliocene(22–5 Myr) volcanism and associated seamounts are abundant in the continent-ocean transition(COT) zone in the margin of the north South China Sea(SCS). The petrogenesis of volcanic rocks from these seamounts and regional tectonic evolution of COT zone are poorly known. In this paper, we obtained whole-rock major and trace element compositions and Sr-Nd-Pb isotopic data for these volcanic rocks from the Puyuan and Beipo seamounts within COT zone, in northeastern SCS. Based on the geochemical analyses, the volcanic rocks are classified as alkaline ocean island basalts(OIB) and enriched mid-ocean ridge basalts(E-MORB). The OIBs from the Puyuan seamount are alkaline trachybasalts and tephrites that show enrichment of the light rare earth elements(LREE) relative to heavy rare earth elements(HREE) and more radiogenic Sr-Nd isotopic compositions, and have significant ‘Dupal isotopic anomaly'. In contrast, the E-MORBs from the Beipo seamount are tholeiitic basalts that have less enrichment in LREE and less radiogenic Sr-Nd isotopic compositions than the counterparts from the Puyuan seamount. Petrological and geochemical differences between the OIBs and MORBs from these two seamounts can be explained by different mantle sources and tectonic evolution stages of the COT zone. Syn-spreading OIB type basalts from the Puyuan seamount were derived from an isotopically ‘enriched', and garnet facies-dominated pyroxenitic mantle transferred by the Hainan mantle plume. In contrast, post-spreading E-MORB type basalts from the Beipo seamount are considered to be derived from the melting of isotopically ‘depleted' pyroxenite mantle triggered by lithosphere bending and subsequent post-rifting at the lower continental slope of the northern margin.

Discovery of the Early Devonian Sinistral Shear in the Jiangshan-Shaoxing Fault Zone and its Tectonic Significance

The Jiangshan-Shaoxing fault zone （JSFZ） was formed by the amalgamation of the Yangtze and Cathaysia blocks in the Neoproterozoic.Since the Paleozoic,the JSFZ has experienced three episodes of tectonic activities：the Early Paleozoic ductile strike-slip shear,Early Mesozoic thrust,and the Late Mesozoic extension.

Formation mechanism of fault accommodation zones under combined stress in graben basin:Implications from geomechanical modeling

A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.

A PRELIMINARY STUDY ON THE TECTONICS AND EVOLUTION OF THE FUJIAN COAST CHANGLE-NANAO METAMORPHISM ZONE

The Fujian coast Changle-Nanao metamorphism zone rocks are composed of gneiss, schist andhornblendite which had gone through metamorphism of amphilbolite facies, and followed the large-scaleintrusive mass of gneissic granite. The zone was orginally composed of Early Palaeozoiccontinental margin and island arc volcanic and sedimentary rocks. In 180-150 Ma, the zone undermentductile shear deformation and amphibolite facies metamorphism; and in 130-80 Ma, rose rap1dly andco1lided with the Southeastem China continen1al rnargln volonic rocks a10ng the NE trending ductileshear belt. The above geologic setting laid the present Fujian coast tectonic foundation whose formationand evolution are known to be interrlatal with the sueduction and collision of the Taiwan CentralRange.