Research on Infrared Emissivity and Laser Reflectivity of Sn_(1−x)Er_(x)O_(2)Micro/Nanofibers Based on First-Principles

Sn_(1−x)Er_(x)O_(2)(x=0%,8%,16%,24%)micro/nanofibers were prepared by electrospinning combined with heat treatment using erbium nitrate,stannous chloride and polyvinylpyrrolidone(PVP)as raw materials.The target products were characterized by thermogravimetric analyzer,X-ray diffrotometer,fourier transform infrared spectrometer,scanning electron microscope,spectrophotometer and infrared emissivity tester,and the effects of Er^(3+)doping on its infrared and laser emissivity were studied.At the same time,the Sn_(1−x)Er_(x)O_(2)(x=0%,16%)doping models were constructed based on the first principles of density functional theory,and the related optoelectronic properties such as their energy band structure,density of states,reflectivity and dielectric constant were analyzed,and further explained the mechanism of Er^(3+)doping on SnO_(2)infrared emissivity and laser absorption from the point of electronic structure.The results showed that after calcination at 600℃,single rutile type SnO_(2)was formed,and the crystal structure was not changed by doping Er^(3+).The calcined products showed good fiber morphology,and the average fiber diameter was 402 nm.The infrared emissivity and resistivity of the samples both decreased first and then increased with the increase of Er^(3+)doping amount.When x=16%,the infrared emis-sivity of the sample was at least 0.71;and Er^(3+)doping can effectively reduce the reflectivity of SnO_(2)at 1.06μm and 1.55μm,when x=16%,its reflectivity at 1.06μm and 1.55μm are 50.5%and 40%,respectively,when x=24%,the reflectivity at 1.06μm and 1.55μm wavelengths are 47.3%and 42.1%,respectively.At the same time,the change of carrier concentration and electron transition before and after Er^(3+)doping were described by first-principle calculation,and the regulation mechanism of infrared emissivity and laser reflectivity was explained.This study provides a certain experimental and theoretical basis for the development of a single-type,light-weight and easily prepared infrared and laser compatible-stealth material.

Tailoring micro/nano-fibers for biomedical applications

Nano/micro fibers have evoked much attention of scientists and have been researched as cutting edge and hotspot in the area of fiber science in recent years due to the rapid development of various advanced manufacturing technologies,and the appearance of fascinating and special functions and properties,such as the enhanced mechanical strength,high surface area to volume ratio and special functionalities shown in the surface,triggered by the nano or micro-scale dimensions.In addition,these outstanding and special characteristics of the nano/micro fibers impart fiber-based materials with wide applications,such as environmental engineering,electronic and biomedical fields.This review mainly focuses on the recent development in the various nano/micro fibers fabrication strategies and corresponding applications in the biomedical fields,including tissue engineering scaffolds,drug delivery,wound healing,and biosensors.Moreover,the challenges for the fabrications and applications and future perspectives are presented.

A low-cost and high-strength basalt/carbon fiber reinforced polymer improved by imitating tree-root micro/nano aramid short fiber

The high-strength Basalt Carbon Fiber Reinforced Polymer(BCFRP)composites had been manufactured by guiding Imitating Tree-root Micro/Nano Aramid Short Fiber(ITMNASF)into the interlayer of Basalt Fiber(BF)and Carbon Fiber(CF)plies to form thin interleaving,and various mass proportions of IT-MNASF were designed to discuss the reinforcing effect on the BCFRP heterogeneous composites.The results of three points bending tests showed that flexural strength and energy absorption of 4wt%IT-MNASF reinforced BCFRP heterogeneous composites had been improved by 32.4%and 134.4%respectively compared with that of unreinforced specimens.The 4wt%IT-MNASF reinforced BCFRP specimens showed both a greater strength and a lower cost(reduced by 31%around)than that of plain CFRP composites.X-ray micro-computed tomography scanning results exhibited that the delamination-dominated failure of plain BCFRP composites was changed into multi-layer BF and CF fabrics damage.The reinforcing mechanism revealed that the introduced IT-MNASF could construct quasi-vertical fiber bridging,and it was used as"mechanical claws"to grasp adjacent fiber layers for creating a stronger mechanical interlocking,and this effectively improved resin-rich region and interfacial transition region at the interlayers.The simple and effective IT-MNASF interleaving technique was very successful in low-cost and high-strength development of BCFRP heterogeneous composites.

Preparation of Photocatalyst-supported Polyacrylonitrile Micro/Nano Composite Fiber Material and Its Photocatalytic Activity

A composite photocatalyst,with branch-like BiOI/Bi_(2)WO_(6) heterojunction deposited on the polyacrylonitrile micro/nano composite fiber(PAN MNCF),was prepared via two step hydrothermal method.The products are characterized by X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),photoluminescence(PL)spectra,UV-Vis diffuse reflection spectroscopy(UV-Vis DRS)and time-resolved fluorescence spectra.The PAN/BiOI/Bi_(2)WO_(6) micro/nano composite fiber(PAN/BiOI/Bi_(2)WO_(6) MNCF)showed better visible-light photocatalytic performance than PAN MNCF or BiOI/Bi_(2)WO_(6) powder,probably ascribed to the collective effect between PAN MNCF and BiOI/Bi_(2)WO_(6) heterojunction.Significantly,the PAN/BiOI/Bi_(2)WO_(6) MNCF could be easily recycled through filtration method,thus avoiding the secondary pollution.

Recent progress on green electromagnetic shielding materials based on macro wood and micro cellulose components from natural agricultural and forestry resources

Recent research efforts in the field of electromagnetic interference shielding(EMI)materials have focused on biomass as a green and sustainable resource.More specifically,wood and cellulose nano fiber(CNF)have many advantages,some of which include lightweight,porosity,widespread availability,low cost,and easy processing.These favorable properties have led researchers to consider these types of biomass as an EMI shielding material with great potential.At present,while many excellent published works in EMI shielding materials have investigated wood and CNF,this research area is still new,compared with non-biomass EMI shielding materials.More specifically,there is still a lack of in-depth research and summary on the preparation process,pore structure regulation,component optimization,and other factors affecting the EMI shielding of wood and CNF based EMI shielding materials.Thus,this review paper presents a comprehensive summary of recent research on wood and CNF based EMI shielding materials in recent three years in terms of the preparation methods,material structure design,component synergy,and EMI mechanism,and a forward future perspective for existing problems,challenges,and development trend.The ultimate goal is to provide a comprehensive and informative reference for the further development and exploration of biomass EMI shielding materials.