Alpha-alumina(α-Al_2O_3) platelets were prepared via solid-state reaction using pseudo-boehmite as the starting material, while NH_4F and nano-SiO_2 were used as additives, and nitric acid was used as the binder. The...Alpha-alumina(α-Al_2O_3) platelets were prepared via solid-state reaction using pseudo-boehmite as the starting material, while NH_4F and nano-SiO_2 were used as additives, and nitric acid was used as the binder. The effect of these additives on properties of the alumina platelets was determined via scanning electron microscopy, X-ray diffraction, and measurements of the surface area and silicon content. A mechanism governing their role in the synthesis process was proposed. The results indicated that NH_4F could promote the formation of highly crystalline platelets. Addition of nano-SiO_2 could lead to increase in the diameter and reduction in the thickness of the platelets, and could also prevent their transformation to α-Al_2O_3. This addition weakened the effect of NH_4F because of the reaction of nano-SiO_2 with F-species and the formation of volatile SiF_4.展开更多
SiO2-Al2O3/EP-PU nanocomposites, which contained polyurethane(PU) flexible chain, were prepared via epoxy resin, PU and modified silica and alumina particles. Silica and alumina particles were modified by coupling age...SiO2-Al2O3/EP-PU nanocomposites, which contained polyurethane(PU) flexible chain, were prepared via epoxy resin, PU and modified silica and alumina particles. Silica and alumina particles were modified by coupling agents KH-560 and KH550, respectively. EP-PU was used as matrix, PU as toughening agent, Si O2-Al2O3 as filled and MTHPA as curing agent. The mass ratio of PU was 30% in this system. The chemical structure of the products was confirmed by FT-IR measurements, the morphological structure of fracture surface and the surface of the hybrid materials were observed by scanning electron microscope(SEM) and transmission electron microscope(TEM), and shearing strength and breakdown field were measured, respectively. When the mass fraction of inorganic component was 10% and the mass ratio of Si O2 to Al2O3 was 4.5:5.5, shearing strength of Si O2-Al2O3/EP-PU was 28.5 MPa and breakdown field was 15 k V/mm, the data could meet the property requirement of insulating material.展开更多
C3S pastes containing 0%,5%,10%,and 15%nano-SiO2 mixed with de-ionized water and alkali solutions were prepared.When C3S was completely hydrated,the pastes were ground into powders with a particle size less than 80μm...C3S pastes containing 0%,5%,10%,and 15%nano-SiO2 mixed with de-ionized water and alkali solutions were prepared.When C3S was completely hydrated,the pastes were ground into powders with a particle size less than 80μm.Adsorption and desorption characteristics of alkali ions adsorbed by C3S-nano SiO2 pastes mixed with de-ionized water immersed in alkali solutions and those in C3S-nano SiO2 pastes mixed with alkali solutions,were investigated.Meawhile,the adsorption mechanisms of alkali ions were discussed.Results showed that the contents of alkali ions adsorbed by C3S-nano SiO2 pastes mixed with de-ionized water increased with increasing substitution levels of nano-SiO2 and/or the initial alkali concentrations.In C3S-nano SiO2 pastes mixed with de-ionized water,each paste was characterized by having a fixed alkali-adsorption capacity that was essentially independent of alkali concentration.No obvious difference between the adsorption capacity of a given paste for K~＋and Na~＋was observed.Adsorption of alkali ions in the pastes is considered to be caused by surface force which is related to the BET specific surface area of the paste,and charge compensation of C-S-H gel,mainly by electrostatic interactions.In C3S-nano SiO2 pastes mixed with alkali solutions,alkali ions may enter the structure of C-S-H gel to replace a part of Ca^2＋in the interlayer.This assumption is supported by the structural characterization of C-S-H gel using ^（29）Si MAS NMR.展开更多
基金supported by the Technology Development(Commission) Project of SINOPEC Catalyst Co.Ltd(Grant No.14-05-01)
文摘Alpha-alumina(α-Al_2O_3) platelets were prepared via solid-state reaction using pseudo-boehmite as the starting material, while NH_4F and nano-SiO_2 were used as additives, and nitric acid was used as the binder. The effect of these additives on properties of the alumina platelets was determined via scanning electron microscopy, X-ray diffraction, and measurements of the surface area and silicon content. A mechanism governing their role in the synthesis process was proposed. The results indicated that NH_4F could promote the formation of highly crystalline platelets. Addition of nano-SiO_2 could lead to increase in the diameter and reduction in the thickness of the platelets, and could also prevent their transformation to α-Al_2O_3. This addition weakened the effect of NH_4F because of the reaction of nano-SiO_2 with F-species and the formation of volatile SiF_4.
基金Project(2012RFJGG006)supported by the Harbin Science and Technology Innovation Foundation,China
文摘SiO2-Al2O3/EP-PU nanocomposites, which contained polyurethane(PU) flexible chain, were prepared via epoxy resin, PU and modified silica and alumina particles. Silica and alumina particles were modified by coupling agents KH-560 and KH550, respectively. EP-PU was used as matrix, PU as toughening agent, Si O2-Al2O3 as filled and MTHPA as curing agent. The mass ratio of PU was 30% in this system. The chemical structure of the products was confirmed by FT-IR measurements, the morphological structure of fracture surface and the surface of the hybrid materials were observed by scanning electron microscope(SEM) and transmission electron microscope(TEM), and shearing strength and breakdown field were measured, respectively. When the mass fraction of inorganic component was 10% and the mass ratio of Si O2 to Al2O3 was 4.5:5.5, shearing strength of Si O2-Al2O3/EP-PU was 28.5 MPa and breakdown field was 15 k V/mm, the data could meet the property requirement of insulating material.
基金Funded by the Program for Changjiang Scholars and Innovative Research Team in University(PCSIRT)(No.IRT1146)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘C3S pastes containing 0%,5%,10%,and 15%nano-SiO2 mixed with de-ionized water and alkali solutions were prepared.When C3S was completely hydrated,the pastes were ground into powders with a particle size less than 80μm.Adsorption and desorption characteristics of alkali ions adsorbed by C3S-nano SiO2 pastes mixed with de-ionized water immersed in alkali solutions and those in C3S-nano SiO2 pastes mixed with alkali solutions,were investigated.Meawhile,the adsorption mechanisms of alkali ions were discussed.Results showed that the contents of alkali ions adsorbed by C3S-nano SiO2 pastes mixed with de-ionized water increased with increasing substitution levels of nano-SiO2 and/or the initial alkali concentrations.In C3S-nano SiO2 pastes mixed with de-ionized water,each paste was characterized by having a fixed alkali-adsorption capacity that was essentially independent of alkali concentration.No obvious difference between the adsorption capacity of a given paste for K~＋and Na~＋was observed.Adsorption of alkali ions in the pastes is considered to be caused by surface force which is related to the BET specific surface area of the paste,and charge compensation of C-S-H gel,mainly by electrostatic interactions.In C3S-nano SiO2 pastes mixed with alkali solutions,alkali ions may enter the structure of C-S-H gel to replace a part of Ca^2＋in the interlayer.This assumption is supported by the structural characterization of C-S-H gel using ^（29）Si MAS NMR.
