ANALYSIS AND MEASUREMENT FOR THE DYNAMIC ERRORS OF COORDINATE MEASURING MACHINES

The analysis and calculating method of dynamic errors of CMMs during probing are discussed.To relate the dynamic displacement errors with the dynamic rotational errors a method for obtaining the displacement errors at the probing position from dynamic rotational errors is presented.It is pointed out that the finite element method might be used for modeling dynamic errors.However,dynamic errors are difficult to be modeled so a combined practical and theoretical approach is needed.In addition,the dynamic errors are measured with inductive position sensors.

Machine learning insights on intensive care unit-acquired weakness

Intensive care unit-acquired weakness(ICU-AW)significantly hampers patient recovery and increases morbidity.With the absence of established preventive strategies,this study utilizes advanced machine learning methodologies to unearth key predictors of ICU-AW.Employing a sophisticated multilayer perceptron neural network,the research methodically assesses the predictive power for ICU-AW,pinpointing the length of ICU stay and duration of mechanical ventilation as pivotal risk factors.The findings advocate for minimizing these elements as a preventive approach,offering a novel perspective on combating ICU-AW.This research illuminates critical risk factors and lays the groundwork for future explorations into effective prevention and intervention strategies.

Vibrations induced by tunnel boring machine in urban areas: In situ measurements and methodology of analysis

Excavation with tunnel boring machine(TBM)can generate vibrations,causing damages to neighbouring buildings and disturbing the residents or the equipment.This problem is particularly challenging in urban areas,where TBMs are increasingly large in diameter and shallow in depth.In response to this problem,four experimental campaigns were carried out in different geotechnical contexts in France.The vibration measurements were acquired on the surface and inside the TBMs.These measurements are also complemented by few data in the literature.An original methodology of signal processing is pro-posed to characterize the amplitude of the particle velocities,as well as the frequency content of the signals to highlight the most energetic bands.The levels of vibrations are also compared with the thresholds existing in various European regulations concerning the impact on neighbouring structures and the disturbance to local residents.

Automatic Monitoring System for 3-D Deformation of Crustal Fault Based on Laser and Machine Vision

An automatic monitoring method of the 3-D deformation is presented for crustal fault based on laser and machine vision. The laser source and screen are independently set up in the headwall and footwall, the collimated laser beam creates a circular spot on the screen, meanwhile, the industrial camera captures the tiny deformation of the crustal fault by monitoring the change of the spot position. This method significantly reduces the cost of equipment and labor, provides daily sampling to ensure high continuity of data. A prototype of the automatic monitoring system is developed, and a repeatability test indicates that the error of spot jitter can be minimized by consecutive samples. Meanwhile, the environmental correction model is determined to ensure that environmental changes do not disturb the system. Furthermore, the automatic monitoring system has been applied at the deformation monitoring station(KJX02) of China Beishan underground research laboratory, where continuous deformation monitoring is underway.

BotSward: Centrality Measures for Graph-Based Bot Detection Using Machine Learning

The number of botnet malware attacks on Internet devices has grown at an equivalent rate to the number of Internet devices that are connected to the Internet.Bot detection using machine learning(ML)with flow-based features has been extensively studied in the literature.Existing flow-based detection methods involve significant computational overhead that does not completely capture network communication patterns that might reveal other features ofmalicious hosts.Recently,Graph-Based Bot Detection methods using ML have gained attention to overcome these limitations,as graphs provide a real representation of network communications.The purpose of this study is to build a botnet malware detection system utilizing centrality measures for graph-based botnet detection and ML.We propose BotSward,a graph-based bot detection system that is based on ML.We apply the efficient centrality measures,which are Closeness Centrality(CC),Degree Centrality(CC),and PageRank(PR),and compare them with others used in the state-of-the-art.The efficiency of the proposed method is verified on the available Czech Technical University 13 dataset(CTU-13).The CTU-13 dataset contains 13 real botnet traffic scenarios that are connected to a command-and-control(C&C)channel and that cause malicious actions such as phishing,distributed denial-of-service(DDoS)attacks,spam attacks,etc.BotSward is robust to zero-day attacks,suitable for large-scale datasets,and is intended to produce better accuracy than state-of-the-art techniques.The proposed BotSward solution achieved 99%accuracy in botnet attack detection with a false positive rate as low as 0.0001%.

Energy-Efficient Approaches for a Machine Tool Building in a University through Field Measurement and Energy Modelling

The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negative impacts of excessive energy use on the environment,it is essential to employ an energy-efficient HVAC system.This study conducted the machine tools building in a university.The field measurement was carried out,and the data were used to conduct energymodelling with EnergyPlus(EP)in order to discover some improvements in energy-efficient design.The validation between fieldmeasurement and energymodelling was performed,and the error rate was less than 10%.The following strategies were proposed in this study based on several energy-efficient approaches,including room temperature settings,chilled water supply temperature settings,chiller coefficient of performance(COP),shading,and building location.Energy-efficient approaches have been evaluated and could reduce energy consumption annually.The results reveal that the proposed energy-efficient approaches of room temperature settings(3.8%),chilled water supply temperature settings(2.1%),chiller COP(5.9%),using shading(9.1%),and building location(3.0%),respectively,could reduce energy consumption.The analysis discovered that using a well-performing HVAC system and building shading were effective in lowering the amount of energy used,and the energy modelling method could be an effective and satisfactory tool in determining potential energy savings.

Multiple Measurement Models of Articulated Arm Coordinate Measuring Machines

The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable calibration parameters. To compensate for the deficiency of one measurement model, the multiple measurement models are built by the Denavit-Hartenberg＇s notation, the homemade standard rod components are used as a calibration tool and the Levenberg-Marquardt calibration algorithm is applied to solve the structural parameters in the measurement models. During the tests of multiple measurement models, the sample areas are selected in two situations. It is found that the measurement errors＇ sigma value（0.083 4 ram） dealt with one measurement model is nearly two times larger than that of the multiple measurement models（0.043 1 ram） in the same sample area. While in the different sample area, the measurement errors＇ sigma value（0.054 0 ram） dealt with the multiple measurement models is about 40% of one measurement model（0.137 3 mm）. The preliminary results suggest that the measurement accuracy of AACMM dealt with multiple measurement models is superior to the accuracy of the existing machine with one measurement model. This paper proposes the multiple measurement models to improve the measurement accuracy of AACMM without increasing any hardware cost.

CAD Model-Based Intelligent Inspection Planning for Coordinate Measuring Machines

As the market competition among enterprises grows intensively and the demand for high quality products increases rapidly, product quality inspection and control has become one of the most important issues of manufacturing, and improving the efficiency and accuracy of inspection is also one of problems which enterprises must solve. It is particularly important to establish rational inspection planning for parts before inspecting product quality correctly. The traditional inspection methods have been difficult to satisfy the requirements on the speed and accuracy of modern manufacturing, so CAD-based computer-aided inspection planning （CAIP） system with the coordinate measuring machines （CMM） came into being. In this paper, an algorithm for adaptive sampling and collision-free inspection path generation is proposed, aiming at the CAD model-based inspection planning for coordinate measuring machines （CMM）. Firstly, using the method of step adaptive subdivision and iteration , the sampling points for the specified number with even distribution will be generated automatically. Then, it generates the initial path by planning the inspection sequence of measurement points according to the values of each point＇s weight sum of parameters, and detects collision by constructing section lines between the probe swept-volume surfaces and the part surfaces, with axis-aligned bounding box （AABB） filtering to improve the detection efficiency. For collided path segments, it implements collision avoidance firstly aiming at the possible outer-circle features, and then at other collisions, for which the obstacle-avoiding movements are planned with the heuristic rules, and combined with a designed expanded AABB to set the obstacle-avoiding points. The computer experimental results show that the presented algorithm can plan sampling points＇ locations with strong adaptability for different complexity of general surfaces, and generate efficient optimum path in a short time and avoid collision effectively.

ERROR COMPENSATION OF COORDINATE MEASURING MACHINES WITH LOW STIFFNESS

A technique for compensating the errors of coordinate measuring machines (CMMs) with low stiffness is proposed. Some additional items related with the force deformation are introduced to the error compensation aquations. The research was carried on a moving colunm horizontal arm CMM. Experimental results show that both the effects of systematic components of error motions and force deformations are greatly reduced, which shows the effectiveness of proposed technique.

Flexible Scanning Method by Integrating Laser Line Sensors with Articulated Arm Coordinate Measuring Machines

Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control.Owing to increasing structural complexity of recent products,measurements from multiple directions are typically required in current scanning techniques.Specifically,the plane structured light can be applied to measure one area of a part at a time,with an additional algorithm required to merge the collected data of each area.Alternatively,the line structured light sensor integrated on CNC machines or CMMs could also realize multi-view measurement.However,the system needs to be repeatedly calibrated at each new direction.This paper presents a flexible scanning method by integrating laser line sensors with articulated arm coordinate measuring machines(AACMM).Since the output of the laser line sensor is 2D raw data in the laser plane,our system model introduces an explicit transformation from the 2D sensor coordinate frame to the 3D base coordinate frame of the AACMM(i.e.,the translation and rotation the of the 2D sensor coordinate in the sixth coordinate system of AACMM).To solve the model,the“conjugate pairs”are proposed and identified by measuring a fixed point(e.g.,a sphere center).Moreover,a search algorithm is adopted to find the optimal solution,which noticeably boosts the model accuracy.The experimental results show that the error of the system is about 0.2 mm,which is caused by the error of the AACMM,the sensor error and the calibration error.By measuring a complicated part,the proposed system is proved to be flexible and facilitate,with the ability to measure a part expediently from any necessary direction.Furthermore,the proposed calibration method can also be used for robot hand-eye relationship calibration.

Error Analysis for High-precision 7m Laser Measuring Machine

This paper introduces a high precision 7m laser measuring instrument developedby the anthors and its operating principle,and systematically analyses the errors havinginfluence on the performance of the measuring instrument.Error analysis and actualverification indicate that all the characteristics reached or exceeded the original designspecifications.

Helical angle measurement of worm by a coordinate measuring machine and its uncertainty evaluation

The purpose of the study concerns the measurement of worm's helical angle by a coordinate measurement machine in the ambient industrial environment. The novel measurement method and sampling strategy were described firstly. This method used the coordinate measurement machine to measure both of the worm gear's left and right surfaces. The worm surface was reconstructed based on the measured data of all the sampling points. Then a middle cylinder was established to truncate the fitted worm surfaces, and the truncated spiral lines were straightened to calculate the helical angle. The measurement uncertainty of worm's helical angle was evaluated by taking the difference of calculated helical angles along the truncated spiral lines on both the left and right side surfaces of the worm. Twenty-four measurement experiments show that the maximum measurement error of the proposed method is 0.105, and the measurement error ratios are all less than 3.5%. The result means that the measurement method can realize the precision measurement of worm's helical angle and can be employed in the generally industrial application.

COORDINATE MEASURING MACHINE PROBING ACCESSIBILITY

The accessibility of coordinate measuring machines (CMMs) in dimensional inspection is studied. The problem of computing the global accessibility cone is solved using a method of angle representation. Otherwise, the length and volume of probe are considered sufficiently so that all the feasible probe orientations could be determined for the inspection of a workpiece when a touch trigger probe is used and the shortcoming of abstracting a probe as an infinite half line could be overcome completely. In the end, an example is given to explain the method.

Determination of the workspace of a new coordinate-measuring machine using parallel-link mechanism

Presents the detailed algorithm established for determination of workspace for a 3-DOF coordinate measuring machine using parallel link mechanism by constructing the inverse kinematic model first and then reviewing the physical and kinematical constraints from the structural characteristics of the parallel link mechanism, and discusses the actual geometries of workspace and the factors having effect on workspace through computer simulation thereby providing necessary theoretical basis for the research and development of coordinate measuring machines using parallel link mechanism.

Theoretical analysis and verification of uncertainty of measurement on a cantilever coordinate measuring machine

A cantilever coordinate measuring machine(CCMM)is proposed according to the in-situ measurement requirement of workpieces with complex structures limited by the finite space of the5-axes computerized numerical control(CNC)processing site.Factors affecting uncertainty of measurement(UM)are classified and analyzed on the basis of uncertainty evaluation criteria,and the estimation technique of UM for measuring systems is presented.UM of the CCMM is estimated from the factors such as temperature,error motions as well as the mechanism deformations.Measurement results show that the actual measurement error is smaller than that of measurement requirement.

Cylindrical coordinate measuring machines: probe offset and workpiece clamping error

A cylindrical coordinate measuring machine for the detection of large-size rotational parts is introduced. The measuring machine can simultaneously measure the geometrical dimensions, form and position errors of the inner and outer surfaces. Since the maximum length of the workpiece can reach 2 000 mm , it is difficult to be clamped and adjusted and easy to produce clamping error. The eccentricity can be up to 1.5 mm, which has an interaction effect with the probe mounting offset. We mainly study the probe offset of the measuring machine and the influence of the workpiece clamping error on the measurement. A method of controlling the offset of the measuring probe is proposed. The effect of the clamping error is eliminated through the space coordinate transformation of the workpiece axis, and the axis is fitted by the least square method. Finally, a common fixture can be realized to meet the clamping requirements of the workpiece.

ASSESSING THE DYNAMIC ERRORS OF COORDINATE MEASURING MACHINES

The main factors affecting the dynamic errors of coordinate measuring machines are analyzed. It is pointed out that there are two main contributors to the dynamic errors: One is the rotation of the elements around the joints connected with air bearings and the other is the bending of the elements caused by the dynamic inertial forces. A method for obtaining the displacement errors at the probe position from dynamic rotational errors is presented. The dynamic rotational errors are measured with inductive position sensors and a laser interferometer. The theoretical and experimental results both show that during the process of fast probing, due to the dynamic inertial forces, there are not only large rotation of the elements around the joints connected with air bearings but also large bending of the weak elements themselves.

High-precision automatic measurement of two-dimensional geometric features based on machine vision

To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition and working principle are introduced. The mapping relationship between the feature image coordinates and the measuring space coordinates is established. The method of measuring path planning of small field of view （FOV） images is proposed. With the cooperation of the panoramic image of the object to be measured, the small FOV images with high object plane resolution are acquired automatically. Then, the auxiliary measuring characteristics are constructed and the parameters of the features to be measured are automatically extracted. Experimental results show that the absolute value of relative error is less than 0. 03% when applying the cooperative measurement system to gauge the hole distance of 100 mm nominal size. When the object plane resolving power of the small FOV images is 16 times that of the large FOV image, the measurement accuracy of small FOV images is improved by 14 times compared with the large FOV image. It is suitable for high-precision automatic measurement of two-dimensional complex geometric features distributed on large scale parts.

Accurate Measurement Method for Tube's Endpoints Based on Machine Vision

Tubes are used widely in aerospace vehicles, and their accurate assembly can directly affect the assembling reliability and the quality of products. It is important to measure the processed tube＇s endpoints and then fix any geometric errors correspondingly. However, the traditional tube inspection method is time-consuming and complex operations. Therefore, a new measurement method for a tube＇s endpoints based on machine vision is proposed. First, reflected light on tube＇s surface can be removed by using photometric linearization. Then, based on the optimization model for the tube＇s endpoint measurements and the principle of stereo matching, the global coordinates and the relative distance of the tube＇s endpoint are obtained. To confirm the feasibility, ll tubes are processed to remove the reflected light and then the endpoint＇s positions of tubes are measured. The experiment results show that the measurement repeatability accuracy is 0.167 mm, and the absolute accuracy is 0.328 ram. The measurement takes less than 1 min. The proposed method based on machine vision can measure the tube＇s endpoints without any surface treatment or any tools and can realize on line measurement.