Nanosized Ni-Mn oxide powders have been successfully citrate gel precursors. The powder materials derived from prepared by thermal decomposition of the Ni-Mn calcination of the gel precursors with various molar ratios...Nanosized Ni-Mn oxide powders have been successfully citrate gel precursors. The powder materials derived from prepared by thermal decomposition of the Ni-Mn calcination of the gel precursors with various molar ratios of nickel and manganese at different temperatures and time were characterized using thermal analysis （TG-DSC）, scanning electron microscopy （SEM）, X-ray diffraction （XRD） and Brunauer-Emmet-Teller （BET）. The optimized processing conditions of calcination at 400℃ for 1 h with Ni/Mn molar ratio 6 were proved to produce the nanosized Ni-Mn oxide powders with a high specific surface area of 109.62 m^2/g and nanometer particle sizes of 15-30 nm. The capacitance characteristics of the nanosized Ni-Mn oxide electrode in various concentrations of KOH solutions were studied by the cyclic voltammetry （CV） and exhibited both a doublelayer capacitance and a Faradaic capacitance which could be attributed to the electrode consisting of Ni-Mn oxides and residual carbons from the organic gel thermal decomposition. A specific capacitance of 194.8 F/g was obtained for the electrode at the sweep rate of 10 mV/s in 4 mol/L KOH electrolyte and the capacitor showed quite high cyclic stability and is promising for advanced electrochemical capacitors.展开更多
Nanosized nickel oxide powders were prepared by thermal decomposition of the nickel citrate gel precursors. The thermal decomposition and powder materials derived from calcination of these gel precursors with various ...Nanosized nickel oxide powders were prepared by thermal decomposition of the nickel citrate gel precursors. The thermal decomposition and powder materials derived from calcination of these gel precursors with various ratios of citric acid （CA） to nickel at different temperatures and times were characterized by thermal analysis （TG/DTA）, scanning electron microscopy （SEM）, x-ray diffraction （XRD）, and measurement of specific surface area （BET） with porosity analyses. The optimized processing conditions of calcination temperature 400℃ for 1 hour with the CA/Ni ratio of 1.2, were determined to produce the nanosized nickel oxide pow- ders with a high specific surface area of 181 m^2/g, nanometer particle sizes of 15-25 nm, micro-pore diameter distribution between 4-10 nm. The capacitance characteristics of the nanosized nickel oxide electrode in various concentrations of KOH solutions were studied by the cyclic voltammetry （CV） exhibiting both a double-layer capacitance and a faradaic pseudocapacitance. The nanosized nickel oxide electrode shows a high cyclic stability and is promising for high performance electrochemical capacitors.展开更多
Nanosized metal oxides were recommended as pH-sensitive materials to fabricate solid pH sensors with screen printable technique. The metal oxide electrodes studied in this paper showed a better selectivity to hydrogen...Nanosized metal oxides were recommended as pH-sensitive materials to fabricate solid pH sensors with screen printable technique. The metal oxide electrodes studied in this paper showed a better selectivity to hydrogen ions with the presence of alkali ions. Particularly, the outstanding advantage of these electrodes was that these electrodes were available to measure the pH of the highly corrosive system containing HF.展开更多
基金This work was supported by the National Natural Science Foundation of China under Grant No.50134020.
文摘Nanosized Ni-Mn oxide powders have been successfully citrate gel precursors. The powder materials derived from prepared by thermal decomposition of the Ni-Mn calcination of the gel precursors with various molar ratios of nickel and manganese at different temperatures and time were characterized using thermal analysis （TG-DSC）, scanning electron microscopy （SEM）, X-ray diffraction （XRD） and Brunauer-Emmet-Teller （BET）. The optimized processing conditions of calcination at 400℃ for 1 h with Ni/Mn molar ratio 6 were proved to produce the nanosized Ni-Mn oxide powders with a high specific surface area of 109.62 m^2/g and nanometer particle sizes of 15-30 nm. The capacitance characteristics of the nanosized Ni-Mn oxide electrode in various concentrations of KOH solutions were studied by the cyclic voltammetry （CV） and exhibited both a doublelayer capacitance and a Faradaic capacitance which could be attributed to the electrode consisting of Ni-Mn oxides and residual carbons from the organic gel thermal decomposition. A specific capacitance of 194.8 F/g was obtained for the electrode at the sweep rate of 10 mV/s in 4 mol/L KOH electrolyte and the capacitor showed quite high cyclic stability and is promising for advanced electrochemical capacitors.
基金the National Natural Science Foundation of China(No.50134020)
文摘Nanosized nickel oxide powders were prepared by thermal decomposition of the nickel citrate gel precursors. The thermal decomposition and powder materials derived from calcination of these gel precursors with various ratios of citric acid （CA） to nickel at different temperatures and times were characterized by thermal analysis （TG/DTA）, scanning electron microscopy （SEM）, x-ray diffraction （XRD）, and measurement of specific surface area （BET） with porosity analyses. The optimized processing conditions of calcination temperature 400℃ for 1 hour with the CA/Ni ratio of 1.2, were determined to produce the nanosized nickel oxide pow- ders with a high specific surface area of 181 m^2/g, nanometer particle sizes of 15-25 nm, micro-pore diameter distribution between 4-10 nm. The capacitance characteristics of the nanosized nickel oxide electrode in various concentrations of KOH solutions were studied by the cyclic voltammetry （CV） exhibiting both a double-layer capacitance and a faradaic pseudocapacitance. The nanosized nickel oxide electrode shows a high cyclic stability and is promising for high performance electrochemical capacitors.
文摘Nanosized metal oxides were recommended as pH-sensitive materials to fabricate solid pH sensors with screen printable technique. The metal oxide electrodes studied in this paper showed a better selectivity to hydrogen ions with the presence of alkali ions. Particularly, the outstanding advantage of these electrodes was that these electrodes were available to measure the pH of the highly corrosive system containing HF.
