A diode-end-pumped electro-optic (EO) Q-switched adhesive-free bond composite Nd:YVO4 laser operating at a repetition rate of 200 kHz is reported.A pair of RbTiOPO4 (RTP) crystals are used as a high repetition EO Q-sw...A diode-end-pumped electro-optic (EO) Q-switched adhesive-free bond composite Nd:YVO4 laser operating at a repetition rate of 200 kHz is reported.A pair of RbTiOPO4 (RTP) crystals are used as a high repetition EO Q-switch.At the repetition rate of 200kHz,the maximum average output power of 11.8 W at wavelength 1064 nm and full width at half maximum of pulses of 16.65ns are achieved at an incident pump power of 27 W,corresponding to an optical conversion efficiency of 43.7% and a slope efficiency of 44.6%,respectively.To the best of our knowledge,this is the highest repetition rate reported on the EO Q-switched laser by using RTP crystals.展开更多
A black phosphorus (BP) saturable absorber (SA) solution with different concentrations (1.0 and 0.5 mg/ml) is fabricated with the liquid-phase exfoliation method. By using the BP-SA, a compact diode-pumped passively Q...A black phosphorus (BP) saturable absorber (SA) solution with different concentrations (1.0 and 0.5 mg/ml) is fabricated with the liquid-phase exfoliation method. By using the BP-SA, a compact diode-pumped passively Q-switched Nd:YVO4 laser is demonstrated. One reflecting Bragg gratings is used as the output coupler for mode selection. By inserting those BP-SA solutions in the laser cavity, the maximum single longitude mode, Q-switched output powers of 126mW at 692.5 kHz and 149mW at 630.3 kHz are achieved at the pump power of 8.0 W, corresponding to the pulse durations of 144 ns and 196 ns, respectively. Moreover, longitudinal-mode characteristics of Q-switched output laser in different optical cavity lengths based on two-kind BP-SA solution concentrations are investigated. Our results show that BP-SA could also be developed as an effective SA for the Q-switched, single longitudinal mode pulse laser.展开更多
We develop a two-stage end-pumped Nd:YVO4 amplifier seeded by a passively Q-switched microchip laser. An average output power of 13.5 W with repetition rate up to 7 kHz and pulse duration of ~1.24 ns is obtained,corre...We develop a two-stage end-pumped Nd:YVO4 amplifier seeded by a passively Q-switched microchip laser. An average output power of 13.5 W with repetition rate up to 7 kHz and pulse duration of ~1.24 ns is obtained,corresponding to a pump extraction efficiency of 16.1%(19.5% for the second stage) and peak power of ~1.5 MW.The beam quality factors at maximum output power are measured to be Mx2= 1.56 and My2= 1.48. We introduce an analytical model to estimate gain and beam quality after amplification. This model focuses on the influence of ratio of seed spot radius to pump spot radius when designing an amplifier. Moreover, our experiments reveal that the re-imaging system in the double-pass configuration can be used to enhance the beam quality.展开更多
A high power Nd：YAG end-pumped slab amplifier chain with a Nd：YVO4 innoslab laser as the master oscillator is demonstrated. A chain output power of 5210 W with beam quality of 4 times the diffraction limit is achiev...A high power Nd：YAG end-pumped slab amplifier chain with a Nd：YVO4 innoslab laser as the master oscillator is demonstrated. A chain output power of 5210 W with beam quality of 4 times the diffraction limit is achieved by double-passing the first amplifier stage and single-passing the second stage with an optical efficiency of 29% while working at a frequency of 1kHz and pulse width of 200 μs.展开更多
基金Supported by the Science and Technology Department Project of Jilin Province under Grant Nos 2010PT and 20100355.
文摘A diode-end-pumped electro-optic (EO) Q-switched adhesive-free bond composite Nd:YVO4 laser operating at a repetition rate of 200 kHz is reported.A pair of RbTiOPO4 (RTP) crystals are used as a high repetition EO Q-switch.At the repetition rate of 200kHz,the maximum average output power of 11.8 W at wavelength 1064 nm and full width at half maximum of pulses of 16.65ns are achieved at an incident pump power of 27 W,corresponding to an optical conversion efficiency of 43.7% and a slope efficiency of 44.6%,respectively.To the best of our knowledge,this is the highest repetition rate reported on the EO Q-switched laser by using RTP crystals.
基金Supported by West Young Scholar Foundation of the Chinese Academy of Sciences under Grant No XAB2015B27
文摘A black phosphorus (BP) saturable absorber (SA) solution with different concentrations (1.0 and 0.5 mg/ml) is fabricated with the liquid-phase exfoliation method. By using the BP-SA, a compact diode-pumped passively Q-switched Nd:YVO4 laser is demonstrated. One reflecting Bragg gratings is used as the output coupler for mode selection. By inserting those BP-SA solutions in the laser cavity, the maximum single longitude mode, Q-switched output powers of 126mW at 692.5 kHz and 149mW at 630.3 kHz are achieved at the pump power of 8.0 W, corresponding to the pulse durations of 144 ns and 196 ns, respectively. Moreover, longitudinal-mode characteristics of Q-switched output laser in different optical cavity lengths based on two-kind BP-SA solution concentrations are investigated. Our results show that BP-SA could also be developed as an effective SA for the Q-switched, single longitudinal mode pulse laser.
基金Supported by the Natural Science Foundation of Guangdong Province under Grant Nos 2017A030310305 and 2018A030310092the Young Teachers Training Program of the Fundamental Research Funds for Sun Yat-sen University under Grant No20174500031610017
文摘We develop a two-stage end-pumped Nd:YVO4 amplifier seeded by a passively Q-switched microchip laser. An average output power of 13.5 W with repetition rate up to 7 kHz and pulse duration of ~1.24 ns is obtained,corresponding to a pump extraction efficiency of 16.1%(19.5% for the second stage) and peak power of ~1.5 MW.The beam quality factors at maximum output power are measured to be Mx2= 1.56 and My2= 1.48. We introduce an analytical model to estimate gain and beam quality after amplification. This model focuses on the influence of ratio of seed spot radius to pump spot radius when designing an amplifier. Moreover, our experiments reveal that the re-imaging system in the double-pass configuration can be used to enhance the beam quality.
文摘A high power Nd：YAG end-pumped slab amplifier chain with a Nd：YVO4 innoslab laser as the master oscillator is demonstrated. A chain output power of 5210 W with beam quality of 4 times the diffraction limit is achieved by double-passing the first amplifier stage and single-passing the second stage with an optical efficiency of 29% while working at a frequency of 1kHz and pulse width of 200 μs.
