Influence of addition of B_2O_3 on properties of Yb^(3+)-doped phosphate laser glass

The three host glasses doped with Yb 3+ were prepared by means of conventional melt quenching technology, and the influence on physical and spectral properties of phosphate glass due to addition of B2O3 was investigated and compared with silicate glass. The results show that due to the existence of OH- impurities which induce the non-radiative route, the fluorescence lifetime of phosphate glass is shorter, so silicate glass has better spectral properties than phosphate glass. Silicate glass has more excellent thermal-mechanical properties than phosphate glass, but with the addition of B2O3, thermal-mechanical properties of phosphate glass are improved greatly without fluorescence quenching effect, and this kind of borophosphate glass will be the candidate to be used in high average power solid state laser.

Investigation on Structures and Properties of Yb^(3+)-Doped Laser Glasses

The Yb3^＋ -doped silicate, phosphate and borophosphate laser glasses were prepared by means of conventional melt quenching technology. The physical and spectral properties of the glasses were investigated. The results show that, due to the existence of OH^-, the fluorescence lifetime of phosphate glass is shorter than that of silicate glass, so silicate glass has better spectral properties than phosphate glass. Silicate glass has better mechanical and thermal properties than phosphate glass, but with the addition of B2O3, mechanical and thermal properties of phosphate glass are improved greatly without fluorescence quenching effect. This kind of borophosphate glass can be used in high average power solid state lasers.

Photo-Physical Properties of Stilbine-3 (STB-3) Laser Dyes Embedded in Sol-Gel Glasses

Solid-state tunable dye laser materials developed by incorporation of stable laser dye molecules into solid host matrices like polymers, organically modified silicates (ORMOSILS) and porous sol-gel glasses. These materials have technical advantages such as compactness, better manageability and suitability for field measurement. The recent research work with highly porous sol-gel glasses having good transparency in UV-Near UV region used as solid host for solid-state dye laser materials has attracted a great deal of attention because of its high potential utility than polymers. Two different procedure’s are used for incorpoerating the Stilbine-3 (STB-3) laser dyes into porous sol-gel matrices such as dope or dip methods. In dope method dye is mixed at the sol state and drying is carried out afterward;while in dip method matrix is first prepared and the matrix is dipped in desired dye solution. After preparation of these dye embedded sol-gel glasses we studied their spectroscopic properties of using absorption and fluorescence spectroscopy. Along with spectroscopy properties, the studies for longevity or the shelf life and lasing action of these materials were carried out. Laser dye STB-3 incorporated in sol-gel glass samples shows the same result as in methanolic solution.

Preparation and laser induced damage properties of rare earth doped BAS glass

Rare earth doped B2O3-Al2O3-SiO2 glass （RExBAS, x=5, 10, 20; RE=La, Sm） were prepared by solid state reaction method. Optical transmission spectra of such glass were characterized by ultraviolet spectrometers, and 1064 nm laser induced damage performance was investigated through the method of ＂1-on-1＂. The results indicated that there was a strong absorptive peak near 1064 nm in SmxBAS glass, the peak was enhanced with increasing x. While LaxBAS glass was transparent to 1064 nm laser, at the same time, the results of laser induced damage showed that the anti-laser induced damage performance of such glass was strengthened with the addition of rare earth oxide. Furthermore, the laser induced damage threshold （LIDT） of SmxBAS glass was significantly higher than that of LaxBAS glass. Consequently, Sm^3＋ doping was favor in the improvement of anti-laser induced damage performance for BAS glass.

Space-selective Precipitation and Dissolution of Ag and Au Nanoparticles in Silicate Glasses by Femtosecond Laser Irradiation

In Ag^＋ and Au^3＋ co-doped silicate glass sample, we realized controllable precipitation and dissolution of Ag and Au nanoparticles. A new method was proposed for separate precipitation of Ag and Au nanoparticles in different areas of the same sample through femtosecond laser irradiation and further annealing; different colors were obtained in the same glass. We also studied the laser dissolution of Ag and Au nanoparticles in the Ag^＋ and Au^3＋co-doped silicate glass. The mechanism of the phenomena we observed was discussed briefly.

Comparative Study of Coumarin-120 (C-120) and Stilbine-3 (STB-3) Laser Dyes Doped in Sol-Gel Glasses

In 1967 the first work in solid state dye laser was performed by doping rhodamine dyes in Polymethylmethacrylate (PMMA) materials. Since then some materials like various types of polymers, co-polymers, poly composite glasses have been used as host matrices for doping different laser dyes. Polymers suffer from limited mechanical and thermal stability. Hence glasses can be the alternative hosts. However, because of high processing temperature leading to permanent destruction of dye molecules, the conventional glass preparation technique is not suitable for the introduction of organic laser dyes. This difficulty can be overcome by introducing the laser dye molecules in sol-gel glass which is prepared at low temperature. Recent work with sol-gel glasses shows that these glasses may prove to be better materials compared to polymeric materials because glasses being hard, best optically transparency in Near UV-UV and Visible region and show better photostability. In this research work we reported, comparative study of the photophysical properties of Coumarin-120 (C-120) belonging to 7-aminocoumarin family having two hydrogen atoms attached to the N atom at the 7-position, with Stilbene-3 (STB-3) in three types of HCl catalyzed SiO2 sol-gel matrices prepared by Method I, Method II and Method III respectively.

提高Nd∶YAG晶体中Nd3+离子浓度分布均匀性的研究

本文通过对Ｎｄ∶ＹＡＧ晶体掺质理论的分析，提出了提高Ｎｄ∶ＹＡＧ晶体中Ｎｄ３＋离子浓度分布均匀性的技术途径，并对实验结果进行了讨论。实验结果表明，通过降低析晶率（由３４．７％降到１５．９％），晶体中的Ｎｄ３＋离子浓度梯度由１．８６×１０－４ａｔ／ｃｍ降到５．８１×１０－５ａｔ／ｃｍ。

掺铥石英玻璃的制备与光谱性能研究

2.0μm波段激光在军事、遥感、医疗等领域具有重要应用价值。文章以95SiO_(2)-4.5Al_(2)O_(3)-0.5Tm_(2)O_(3)为配方,通过将溶胶凝胶法和高温熔融法,成功制备了掺铥石英玻璃样品,并测试了样品的物理及光谱性能,计算了相关参数指标。玻璃的密度为2.307 g/cm^(3),1900 nm处的折射率为1.4415,铥离子掺杂浓度为3.60×10^(-19)cm^(-3),794 nm处的吸收截面为1.747×10^(-19)cm^(2),2.0μm处的透过率为85.5%,1850 nm处的发射截面为6.07×10^(-20)cm^(2),荧光寿命为370μs,羟基含量为1.57×10^(18)cm^(-3),光谱性能良好,相关方法及结果为掺杂石英玻璃的制备提供了技术路线。

超短脉冲激光在掺Er^(3+)磷酸盐玻璃中制备光波导的实验研究

超短脉冲激光通过非线性吸收调制光学材料折射率提供了一种高效制备集成三维光子器件的途径.掺Er^(3+)磷酸盐玻璃由于其优异的特性以及在1.55μm通信波段附近的发射光谱,成为了集成光学主动增益材料中的研究热点.实验采用重复频率1 kHz,中心波长800 nm,脉冲宽度120 fs的钛宝石飞秒激光放大系统作为制备波导的光源,系统研究了加工参数对激光写入形貌、波导形成及光学特性的影响.实验结果表明,在狭缝整形辅助短焦物镜横向刻写条件下,写入脉冲能量为1.8μJ时,光波导可以在写入速度为10μm/s-160μm的较宽范围内形成;写入速度为40μm/s时,光波导写入脉冲能量参数窗口为1.6μJ-2.0μJ;波导写入深度在125μm-200μm范围时,波导横截面对称性较好且折射率修改明显;近场强度测量结果显示所制备波导近场强度分布对称,导光特性良好.通过有限差分法反推波导区域折射率修改分布,结果显示最大折射率修改为Δn=6.6×10^(-4).截断传输损耗测量结果显示所制备波导的传输损耗低至0.91 dB/cm.

Preparation and Spectra Properties of BaO-Al_2O_3-P_2O_5-Sm_2O_3 System Protection Glasses

The forming-regions of phosphate glasses doped with high Sm2O3 contents were studied by two step melting method. The relationship between absorption spectrum and rare earth contents was also discussed. The spectra of BASP glasses were measured by spectrophotometer. The results show that the forming regions will shrink with the increase of Al2O3 and it is difficult to form glass when [PO4]/[AlO4] < 2. The forming regions tend to be a closed elliptical, and the intensity of characteristic absorption peak increases gradually with the increase of Sm2O3, the absorption lines broadens non-uniformly and there is approximate linear relation between optical density at the 1064 nm wavelength and Sm2O3 content.

Spectral and Lasing Properties of Er^(3+0/Yb^(3+) Co-Doped Phosphate Glasses Pumped by LD

Er^3 ＋/Yb^3 ＋ phosphate glasses were fabricated. According to McCumber theory, the stimulated emission cross-section of Er^3＋ ions at 1533 nm was calculated on the basis of absorption spectrum, and 0.84 × 10^-20 cm^2 is derived, the fluorescence lifetime of ^4I13/2 level is 8.5 ms. An Er^3＋/Yb^3＋ co-doped phosphate glass CW laser pumped by LD was demonstrated at room temperature. The maximum output power is 80 mW and slope efficiency is 16.5%.

A Three-Dimensional Numerical Model for Predicting the Weld Bead Geometry Characteristics in Laser Overlap Welding of Low Carbon Galvanized Steel

Laser welding (LW) becomes one of the most economical high quality joining processes. LW offers the advantage of very controlled heat input resulting in low distortion and the ability to weld heat sensitive components. To exploit efficiently the benefits presented by LW, it is necessary to develop an integrated approach to identify and control the welding process variables in order to produce the desired weld characteristics without being forced to use the traditional and fastidious trial and error procedures. The paper presents a study of weld bead geometry characteristics prediction for laser overlap welding of low carbon galvanized steel using 3D numerical modelling and experimental validation. The temperature dependent material properties, metallurgical transformations and enthalpy method constitute the foundation of the proposed modelling approach. An adaptive 3D heat source is adopted to simulate both keyhole and conduction mode of the LW process. The simulations are performed using 3D finite element model on commercial software. The model is used to estimate the weld bead geometry characteristics for various LW parameters, such as laser power, welding speed and laser beam diameter. The calibration and validation of the 3D numerical model are based on experimental data achieved using a 3 kW Nd:Yag laser system, a structured experimental design and confirmed statistical analysis tools. The results reveal that the modelling approach can provide not only a consistent and accurate prediction of the weld characteristics under variable welding parameters and conditions but also a comprehensive and quantitative analysis of process parameters effects on the weld quality. The results show great concordance between predicted and measured values for weld bead geometry characteristics, such as depth of penetration, bead width at the top surface and bead width at the interface between sheets, with an average accuracy greater than 95%.

Effects of Yb^3＋ in Er^3＋/Yb^3＋ Codoped Fluorophosphate Glasses

For the Er^3＋ /Yb^3＋ codoped fluorophosphate glasses, Judd-Ofelt theory is used to analyse the influence of YbF3 as not a sensitizer but an average component on the spectroscopic properties around 1530nm emission. The double roles of Yb^3＋, as a sensitizer and as an average component, are discussed. It is found that Yb^3＋ as an average component contributes to the increase of fluorescence lifetime, and Yb^3＋ as a sensitizer has the best sensitization when its concentration is 2.4 mol%.

Spectroscopic Properties of Nd^(3+)-Doped Tellurite Glasses

The Nd^3＋-doped pared. The absorption and tellurite glasses were preemission spectra of Nd^3 ＋- doped tellurite glasses at room temperature were measured. The Judd-Ofelt parameters （Ω2, Ω4, Ω6） of the glasses were calculated from measured absorption spectra. The calculation results of luminescence properties （A, β, τrad, σ） of Nd^3＋ ions in the tellurite were glasses were given. Spectroscopic properties, concentration quenching in these kinds of the glasses were investigated. The results indicate that the tellurite glasses with composition of 70% TeO2, 20% ZnO, （ 10 - x ） % La2O3, x % Nd2O3 （ mol% ） show high emission cross section and low phonon energy. The fluorescent intensity and the emission cross section have a maxi- mum value at x = 0.5, namely, the optimum Nd^3 ＋ ion concentration in the tellurite glass is 0.5% （1.93 × 10^20 ions·cm^-3）. The fluorescence properties of Nd^3＋ measured are basically in accord with the calculated results.

Numerical simulation of end-pumped CW Nd^(3+):GdVO_4 laser at 1063nm

A theoretical model to simulate an end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti：sapphlre-pumped Nd^3＋：GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.

Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns

Laser surface hardening is becoming one of the most successful heat treatment processes for improving wear and fatigue properties of steel parts. In this process, the heating system parameters and the material properties have important effects on the achieved hardened surface characteristics. The control of these variables using predictive modeling strategies leads to the desired surface properties without following the fastidious trial and error method. However, when the dimensions of the surface to be treated are larger than the cross section of the laser beam, various laser scanning patterns can be used. Due to their effects on the hardened surface properties, the attributes of the selected scanning patterns become significant variables in the process. This paper presents numerical and experimental investigations of four scanning patterns for laser surface hardening of AISI 4340 steel. The investigations are based on exhaustive modelling and simulation efforts carried out using a 3D finite element thermal analysis and structured experimental study according to Taguchi method. The temperature distribution and the hardness profile attributes are used to evaluate the effects of heating parameters and patterns design parameters on the hardened surface characteristics. This is very useful for integrating the scanning patterns’ features in an efficient predictive modeling approach. A structured experimental design combined to improved statistical analysis tools is used to assess the 3D model performance. The experiments are performed on a 3 kW Nd:Yag laser system. The modeling results exhibit a great agreement between the predicted and measured values for the hardened surface characteristics. The model evaluation reveals also its ability to provide not only accurate and robust predictions of the temperature distribution and the hardness profile as well an in-depth analysis of the effects of the process parameters.

Spectroscopic Properties of Nd^(3+)-Doped High Silica Glass Prepared by Sintering Porous Glass

A new kind of Nd^3＋-doped high silica glass （SiO2 〉 96% （mass fraction）） was obtained by sintering porous glass impregnated with Nd^3 ＋ ions. The absorption and luminescence properties of high silica glass doped with different Nd^3 ＋ concentrations were studied. The intensity parameters Ωt （t = 2, 4, 6）, spontaneous emission probability, fluorescence lifetime, radiative quantum efficiency, fluorescence branching ratio, and stimulated emission cross section were calculated using the Judd-Ofelt theory. The optimal Nd^3＋ concentration in high silica glass was 0.27% （mole fraction） because of its high quantum efficiency and emission intensity. By comparing the spectroscopic parameters with other Nd^3 ＋- doped oxide glasses and commercial silicate glasses, the Nd^3 ＋ -doped high silica glasses are likely to be a promising material used for high power and high repetition rate lasers.

Sm^(3+)/Ce^(3+)共掺杂B_(2)O_(3)-Al_(2)O_(3)-SiO_(2)玻璃的结构和激光吸收性能

在硼铝硅酸盐玻璃(43B_(2)O_(3)-25Al_(2)O_(3)-32SiO_(2))中进行Sm^(3+)/Ce^(3+)共掺杂,采用固相熔融法制备(B_(2)O_(3)-Al_(2)O_(3)-SiO_(2))-20Sm_(2)O_(3)-x CeO_(2)(x为0~6%,摩尔分数)玻璃,借助X射线衍射、扫描电镜、X射线光电子能谱、紫外-可见-近红外分光光度计等表征方法研究玻璃的结构和激光吸收性能。结果表明,所有样品均为玻璃状,Sm^(3+)和Ce^(3+)均匀分布。随CeO_(2)的摩尔分数从0增加到2%,玻璃中桥氧的摩尔分数从60.12%增加到63.82%,而当CeO_(2)的摩尔分数增加到6%时,桥氧的摩尔分数下降到59.41%。CeO_(2)摩尔分数为2%时玻璃的激光吸收性能最好,漫反射吸收峰位为1076 nm,漫反射率为48.10%。Sm^(3+)/Ce^(3+)共掺杂的硼铝硅酸盐玻璃是一种很有前景的1.06μm波长激光的吸收材料。

Nd^(3+)掺杂磷酸盐激光玻璃猝灭浓度的计算与预测

通过研究稀土离子在玻璃中激发态布居数与掺杂浓度之间的关系,建立了一种半定量的激光玻璃发光猝灭浓度预测的研究方法。研究发现,在Nd^(3+)掺杂磷酸盐玻璃中,无辐射跃迁速率与浓度的线性相关性大于其与浓度的平方相关性,表明OH-对无辐射跃迁几率的影响大于稀土离子之间的能量传递过程。选择低浓度下的荧光寿命代替自发辐射跃迁寿命预测猝灭浓度,有效降低了多声子弛豫以及OH-的影响,预测发光猝灭浓度与实验值的绝对误差从0.82%降低到了0.16%。本文所提出的预测计算方法具有较高的准确性和普适性,这为理论预测激光玻璃的猝灭浓度提供了一定的指导意义,有助于新型激光玻璃的研究和探索。