Localization for mixed near-field and far-field sources under impulsive noise

In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method is proposed.After eliminating the impacts of impulsive noise by the weighted out-lier filter,the direction of arrivals(DOAs)of FFSs can be estimated by multiple signal classification(MUSIC)spectral peaks search.Based on the DOAs information of FFSs,the separation of mixed sources can be performed.Finally,the estimation of localizing parameters of NFSs can avoid two-dimension spectral peaks search by decomposing steering vectors.The Cramer-Rao bounds(CRB)for the unbiased estimations of DOA and range under impulsive noise have been drawn.Simulation experiments verify that the proposed method has advantages in probability of successful estimation(PSE)and root mean square error(RMSE)compared with existing localization methods.It can be concluded that the proposed method is effective and reliable in the environment with low generalized signal to noise ratio(GSNR),few snapshots,and strong impulse.

Spherical Near-Field - Far-Field Transformation for Quasi-Planar Antennas from Irregularly Spaced Data

An effective near-field - far-field (NF - FF) transformation with spherical scanning for quasi-planar antennas from irregularly spaced data is developed in this paper. Two efficient approaches for evaluating the regularly spaced spherical samples from the nonuniformly distributed ones are proposed and numerically compared. Both the approaches rely on a nonredundant sampling representation of the voltage measured by the probe, based on an oblate ellipsoidal modelling of the antenna under test. The former employs the singular value decomposition method to reconstruct the NF data at the points fixed by the nonredundant sampling representation and can be applied when the irregularly acquired samples lie on nonuniform parallels. The latter is based on an iterative technique and can be used also when such a hypothesis does not hold, but requires the existence of a biunique correspondence between the uniform and nonuniform samples, associ- ating at each uniform sampling point the nearest irregular one. Once the regularly spaced spherical samples have been recovered, the NF data needed by a probe compensated NF - FF transformation with spherical scanning are efficiently evaluated by using an optimal sampling interpolation algorithm. It is so possible to accurately compensate known posi- tioning errors in the NF - FF transformation with spherical scanning for quasi-planar antennas. Some numerical tests assessing the accuracy and the robustness of the proposed approaches are reported.

The simulation of far-field wavelets using frequency- domain air-gun array near-field wavelets

Air-gun arrays are used in marine-seismic exploration. Far-field wavelets in subsurface media represent the stacking of single air-gun ideal wavelets. We derived single air-gun ideal wavelets using near-field wavelets recorded from near-field geophones and then synthesized them into far-field wavelets. This is critical for processing wavelets in marine- seismic exploration. For this purpose, several algorithms are currently used to decompose and synthesize wavelets in the time domain. If the traveltime of single air-gun wavelets is not an integral multiple of the sampling interval, the complex and error-prone resampling of the seismic signals using the time-domain method is necessary. Based on the relation between the frequency-domain phase and the time-domain time delay, we propose a method that first transforms the real near-field wavelet to the frequency domain via Fourier transforms; then, it decomposes it and composes the wavelet spectrum in the frequency domain, and then back transforms it to the time domain. Thus, the resampling problem is avoided and single air-gun wavelets and far-field wavelets can be reliably derived. The effect of ghost reflections is also considered, while decomposing the wavelet and removing the ghost reflections. Modeling and real data processing were used to demonstrate the feasibility of the proposed method.

The September 16, 2015 Mw 8.3 Illapel, Chile Earthquake： characteristics of tsunami wave from near-field to far-field

On September 16, 2015, an earthquake with magnitude ofMw 8.3 occurred 46 km offshore from Illapel, Chile, generating a 4.4-m local tsunami measured at Coquimbo. In this study, the characteristics of tsunami are presented by a combination of analysis of observations and numerical simulation based on sources of USGS and NOAA. The records of 16 DART buoys in deep water, ten tidal gauges along coasts of near-field, and ten coastal gauges in the far-field are studied by applying Fourier analyses. The numerical simulation based on nonlinear shallow water equations and nested grids is carried out to provide overall tsunami propagation scenarios, and the results match well with the observations in deep water and but not well in coasts closed to the epicenter. Due to the short distance to the epicenter and the shelf resonance of southern Peru and Chile, the maximum amplitude ranged from 0.1 m to 2 m, except for Coquimbo. In deep water, the maximum amplitude of buoys decayed from 9.8 cm to 0.8 cm, suggesting a centimeter-scale Pacific-wide tsunami, while the governing period was 13-17 min and 32 min. Whereas in the far-field coastal region, the tsunami wave amplified to be around 0.2 m to 0.8 m, mostly as a result of run-up effect and resonance from coast reflection. Although the tsunami was relatively moderate in deep water, it still produced non-negligible tsunami hazards in local region and the coasts of farfield.

Bridging the terahertz near-field and far-field observations of liquid crystal based metamaterial absorbers

Metamaterial-based absorbers play a significant role in applications ranging from energy harvesting and thermal emitters to sensors and imaging devices.The middle dielectric layer of conventional metamaterial absorbers has always been solid.Researchers could not detect the near field distribution in this layer or utilize it effectively.Here,we use anisotropic liquid crystal as the dielectric layer to realize electrically fast tunable terahertz metamaterial absorbers.We demonstrate strong,position-dependent terahertz near-field enhancement with sub-wavelength resolution inside the metamaterial absorber.We measure the terahertz far-field absorption as the driving voltage increases.By combining experimental results with liquid crystal simulations,we verify the near-field distribution in the middle layer indirectly and bridge the nearfield and far-field observations.Our work opens new opportunities for creating high-performance,fast,tunable,terahertz metamaterial devices that can be applied in biological imaging and sensing.

Far-Field Pattern Reconstruction from Positioning Errors Affected Near-Field Data Acquired via Helicoidal Scanning

In this paper, an effective technique to compensate the positioning errors in a near-field—far-field (NF-FF) transformation with helicoidal scanning for elongated antennas is presented and validated both numerically and experimentally. It relies on a nonredundant sampling representation of the voltage measured by the probe, obtained by considering the antenna as enclosed in a cylinder ended in two half-spheres. An iterative scheme is used to reconstruct the helicoidal NF data at the points fixed by the representation from the acquired irregularly spaced ones. Once the helicoidal data have been retrieved, those needed by a classical NF-FF transformation with cylindrical scanning are efficiently evaluated by using an optimal sampling interpolation algorithm. Some numerical tests, assessing the accuracy of the approach and its stability with respect to random errors affecting the data, are reported. Experimental tests performed at the Antenna Characterization Lab of the University of Salerno further confirm the validity of the proposed technique.

Near-field 3D imaging approach combining MJSR and FGG-NUFFT

A near-field three-dimensional(3 D)imaging method combining multichannel joint sparse recovery(MJSR)and fast Gaussian gridding nonuniform fast Fourier transform(FGGNUFFT)is proposed,based on a perfect combination of the compressed sensing(CS)theory and the matched filtering(MF)technique.The approach has the advantages of high precision and high efficiency:multichannel joint sparse constraint is adopted to improve the problem that the images recovered by the single channel imaging algorithms do not necessarily share the same positions of the scattering centers;the CS dictionary is constructed by combining MF and FGG-NUFFT,so as to improve the imaging efficiency and memory requirement.Firstly,a near-field 3 D imaging model of joint sparse recovery is constructed by combining the MF-based imaging method.Secondly,FGG-NUFFT and reverse FGG-NUFFT are used to replace the interpolation and Fourier transform in MF-based imaging methods,and a sensing matrix with high precision and high efficiency is constructed according to the traditional imaging process.Thirdly,a fast imaging recovery is performed by using the improved separable surrogate functionals(SSF)optimization algorithm,only with matrix and vector multiplication.Finally,a 3 D imagery of the near-field target is obtained by using both the horizontal and the pitching interferometric phase information.This paper contains two imaging models,the only difference is the sub-aperture method used in inverse synthetic aperture radar(ISAR)imaging.Compared to traditional CS-based imaging methods,the proposed method includes both forward transform and inverse transform in each iteration,which improves the quality of reconstruction.The experimental results show that,the proposed method improves the imaging accuracy by about O(10),accelerates the imaging speed by five times and reduces the memory usage by about O(10~2).

Yanshanian–Himalayan geodynamic transformation of the northwestern Junggar Basin, southwestern Central Asian Orogenic Belt (CAOB), and its significance for petroleum accumulation

The northwestern Junggar Basin in the southwestern Central Asian Orogenic Belt is a typical petroliferous basin.The widely distributed reservoirs in Jurassic–Cretaceous strata indicate that the region records Yanshanian–Himalayan tectonic activity,which affected the accumulation and distribution of petroleum.The mechanism of this effect,however,has not been fully explored.To fill the knowledge gap,we studied the structural geology and geochemistry of the well-exposed Wuerhe bitumen deposit.Our results indi-cate that deformation and hydrocarbon accumulation in the northwestern Junggar Basin during the Yanshanian–Himalayan geodynamic transformation involved two main stages.During the Yanshanian orogeny,a high-angle extensional fault system formed in Jurassic–Cretaceous strata at intermediate to shallow depths owing to dextral shear deformation in the orogenic belt.This fault system connected at depth with the Permian–Triassic oil–gas system,resulting in oil ascending to form fault-controlled reservoirs(e.g.,a veined bitumen deposit).During the Himalayan orogeny,this fault system was deacti-vated owing to sinistral shear caused by far-field stress related to uplift of the Tibetan Plateau.This and the reservoir densification caused by cementation formed favorable hydrocarbon preservation and accu-mulation conditions.Therefore,the secondary oil reservoirs that formed during the Yanshanian–Himalayan tectonic transformation and the primary oil reservoirs that formed during Hercynian–Indosinian orogenies form a total and complex petroleum system comprising conventional and uncon-ventional petroleum reservoirs.This might be a common feature of oil–gas accumulation in the Central Asian Orogenic Belt and highlights the potential for petroleum exploration at intermediate–shal-low depths.

Effects of hanging wall and forward directivity in the 1999 Chi-Chi earthquake on inelastic displacement response of structures

The characteristics of the inelastic response of structures affected by hanging wall and forward directivity in the 1999 Chi-Chi earthquake are investigated. Inelastic displacement ratios （IDRs） for ground motions impacted by these nearfield effects are evaluated and comprehensively compared to far-field ground motions. In addition, the inelastic displacement responses to hanging wall and footwall ground motions are compared. It is concluded that the inelastic displacement response is significantly affected in the short period range by hanging wall and in the long period range by footwall. Although high peak ground acceleration was observed at hanging wall stations, the IDRs for structures on hanging wall sites are only larger than footwall sites in the very long period range. Forward directivity effects result in larger IDRs for periods longer than about 0.5s. Adopting statistical relationships for IDRs established using far-field ground motions may lead to either overestimation or underestimation in the seismic evaluation of existing structures located in near-field regions, depending on their fundamental vibration periods.

The improved output performance of a broad-area vertical-cavity surface-emitting laser with an optimized electrode diameter

The output performance of a 980-nm broad-area vertical-cavity surface-emitting laser （VCSEL） is improved by optimizing the p-electrode diameter in this study. Based on a three-dimensional finite-element method, the current density distribution within the active region of the VCSEL is optimized through the appropriate adjustment of the p-electrode diameter, and uniform current-density distribution is achieved. Then, the effects of this optimization are studied experimentally. The L-I-V characteristics under different temperatures of the VCSELs with different p-electrode diameters are investigated, and better temperature stability is demonstrated in the VCSEL with an optimized p-electrode diameter. The far-field measurements show that with an injected current of 2 A, the far-field divergence angle of the VCSEL with an optimized p-electrode diameter is 9°, which is much lower than the far-field angle of the VCSEL without this optimization. Also the VCSEL with an optimized p-electrode diameter shows a better near-field distribution.

Sparse recovery method for far-field and near-field sources localization using oblique projection

In this paper, we propose a novel source localization method to estimate parameters of arbitrary field sources, which may lie in near-field region or far-field region of array aperture. The proposed method primarily constructs two special spatial-temporal covariance matrixes which can avoid the array aperture loss, and then estimates the frequencies of signals to obtain the oblique projection matrixes. By using the oblique projection technique, the covariance matrixes can be transformed into several data matrixes which only contain single source information, respectively. At last, based on the sparse signal recovery method, these data matrixes are utilized to solve the source localization problem. Compared with the existing typical source localization algorithms, the proposed method improves the estimation accuracy, and provides higher angle resolution for closely spaced sources scenario. Simulation results are given to demonstrate the performance of the proposed algorithm.

DOA estimation for mixed signals with gain-phase error array

Most of the direction of arrival(DOA) estimation methods often need the exact array manifold, but in actual applications,the gain and phase of the channels are usually inconsistent, which will cause the estimation invalid. A novel direction finding approach for mixed far-field and near-field signals with gain-phase error array is provided. Based on simplifying the space spectrum function by matrix transformation, DOA of far-field signals is obtained. Consequently, errors of the array are acquired according to the orthogonality of far-field signal subspace and noise subspace.Finally, DOA of near-field signals can be estimated. The method merely needs one-dimensional spectrum searching, so as to improve the computational efficiency on the premise of ensuring a certain accuracy, simulation results manifest the effectiveness of the method.

Optically induced atomic lattice with tunable near-field and far-field diffraction patterns

Conventional periodic structures usually have nontunable refractive indices and thus lead to immutable photonic bandgaps. A periodic structure created in an ultracold atoms ensemble by externally controlled light can overcome this disadvantage and enable lots of promising applications. Here, two novel types of optically induced square lattices, i.e., the amplitude and phase lattices, are proposed in an ultracold atoms ensemble by interfering four ordinary plane waves under different parameter conditions. We demonstrate that in the far-field regime, the atomic amplitude lattice with high transmissivity behaves similarly to an ideal pure sinusoidal amplitude lattice, whereas the atomic phase lattices capable of producing phase excursion across a weak probe beam along with high transmissivity remains equally ideal. Moreover, we identify that the quality of Talbot imaging about a phase lattice is greatly improved when compared with an amplitude lattice. Such an atomic lattice could find applications in alloptical switching at the few photons level and paves the way for imaging ultracold atoms or molecules both in the near-field and in the far-field with a nondestructive and lensless approach.

Calculating the transient behavior of grounding systems using inverse Laplace transform

This paper deals with a unified and novel approach for analyzing the frequency and time domain performance of grounding systems.The proposed procedure is based on solving the full set of Maxwell's equations in the frequency domain,and enables the exact computation of very near fields at the surface of the grounding grid,as well as far fields,by simple and accurate closed-form expressions for solving Sommerfeld integrals.In addition,the soil ionization is easily considered in the proposed method.The frequency domain responses are converted to the time domain by fast inverse Laplace transform.The results are validated and have shown acceptable accuracy.

A novel strategy for improving upconversion luminescence of NaYF4：Yb, Er nanocrystals by coupling with hybrids of silver plasmon nanostructures and poly（methyl methacrylate） photonic crystals

The coupling of upconversion nanophosphors （UCNPs） with the surface plasmonic resonance （SPR） of noble metals is a promising way to improve luminescent efficiency of UCNPs; however, it is still a challenge to achieve stable, reproducible and effective upconversion luminescence （UCL） enhancement through such coupling. In this work, we present a novel strategy to improve UCL of NaYF4：ybB,Er3. UCNPs, by combining the near-field coupling of SPR of silver and the far-field coupling of poly（methyl methacrylate） （PMMA） opal photonic crystals （OPCs） with the UCNPs. In order to control the effective interaction distance between the UCNPs and the SPR, a porous silver film consisting of randomly distributed silver nanoparticles （NPs） （〉 100 nm） was prepared which demonstrated strong SPR over a broad wavelength range, and its coupling to the UCNPs was found to be much stronger than that of a dense film. In the far-field coupling of OPCs, the photonic stop band （PSB） of the PMMA OPCs was tuned to 980 nm, matching exactly the excitation light. By modulating the particle size of the UCNPs, and the direction and excitation power of the incident light, a maximum enhancement of 60-fold was observed, which is an important advance for metaMnduced UCL enhancement systems.

Theoretical Modeling and Analysis of Vibroacoustic Characteristics of an Acoustic Metamaterial Plate

Locally resonant metamaterial plates with subwavelength bandgaps can be exploited for the simultaneous control of structural vibrations and acoustic radiation.The present work theoretically investigates the vibroacoustic characteristics of a metamaterial plate with periodic lateral local resonance.The high accuracy of the presented method is evident from the consistency of the cross mobility of the metamaterial plate calculated with the finite element technique.The modal superposition approach and Rayleigh integral technique are adopted to formulate the mean square velocity and acoustic radiation power in terms of the structural deflection and sound pressure to capture the vibroacoustic coupling characteristics of the metamaterial plate and the surrounding environment.Large vibration suppression and sound reduction with high radiation efficiency can be observed within the frequency ranges of interest.The near-field sound intensity and far-field acoustic pressure distributions inside and outside the bandgaps are plotted and analyzed.The results from this work can be utilized to set design guidelines for metamaterial design to achieve prescribed vibroacoustic characteristics.