The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in ne...The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in near-neutral pH solutions was transgranular at different temperatures and applied potentials with the feature of quasi-cleavage. The pH value of the solution decreased with increasing the addition of CO2, which increased the susceptibility to SCC. SCC susceptibility increased as the applied potential moved towards the cathodic direction, suggesting that hydrogen induced cracking (HIC) dominated the cracking process at cathodic potentials. The slight decrease of pH values with decreasing temperature of the solution increased the susceptibility to SCC, which attributed to the change of solubility of CO2 in the solution at different temperatures. The propagating directions of SCC cracks were different at different potentials. At rather negative cathodic potentials, the cracks were almost perpendicular to the tensile axis, while at free corrosion potential and near anodic potentials, cracks were nearly at 45 degree, and in the range of moderate cathodic potentials both propagating directions could be observed.展开更多
The cracking behaviour of X-70 pipeline steel in near-neutral pH solutions was studied under different modes of cyclic loading. The crack propagation process of X-70 pipeline steel under low frequency cyclic loading c...The cracking behaviour of X-70 pipeline steel in near-neutral pH solutions was studied under different modes of cyclic loading. The crack propagation process of X-70 pipeline steel under low frequency cyclic loading condition was controlled mainly by stress corrosion cracking (SCC) mechanism. Under mixed-mode cyclic loading, both higher tensile stress and shear stress made cracks easier to propagate. Applied cathodic potentials and high content of carbon dioxide in solutions also promoted the propagation of cracks. The propagation directions of cracks were different under different cyclic loading conditions. Under mode I (pure tensile stress) cyclic loading condition, cracks were straight and perpendicular to the tensile stress axis, while under mixed-mode 1/111 (tensile/shear stress) cyclic loading,cracks were sinuous and did not propagate in the direction perpendicular to the main tensile stress axis. Under the mixed-mode cyclic loading, cracks were much easier to propagate, suggesting that shear stress intensified the role of tensile stress. In addition, shear stress promoted the interaction between cracks, resulting in easier coalescence of cracks.展开更多
Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute (API) X80 pipeline steel applied in the 2nd West-East (;as Pipeline project with and without prelo...Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute (API) X80 pipeline steel applied in the 2nd West-East (;as Pipeline project with and without preload. The results show that cracks could initiate and propagate in X80 pipeline steel in near-neutral pH environment under a constant load condition. The life of crack initiation and propagation increased with decreasing applied stress. Preload did not change its corrosion behavior obviously. However, preload reduced the time for crack initiation.展开更多
建立一种基于美国官方分析化学师协会(Association of Official Analytical Chemists,AOAC)方法检测黑果枸杞及其制品中花青素含量的改进pH示差法。考察了黑果枸杞及其制品中花青素的最佳提取和检测条件,通过液相色谱-三重四级杆串联质...建立一种基于美国官方分析化学师协会(Association of Official Analytical Chemists,AOAC)方法检测黑果枸杞及其制品中花青素含量的改进pH示差法。考察了黑果枸杞及其制品中花青素的最佳提取和检测条件,通过液相色谱-三重四级杆串联质谱法鉴别出黑果枸杞中花青素的具体化学结构,并计算出混合花青素的平均摩尔质量。通过分光光度法测得混合花青素的平均摩尔消光系数,对改进后的pH示差法进行方法学验证和花青素的含量测定。结果显示,最佳提取和检测条件如下:黑果枸杞花青素提取溶剂为盐酸-80%(体积分数)乙醇(3∶97,体积比),料液比为1∶100(g∶mL),提取温度为50℃,提取时间为30 min,缓冲溶液稀释5倍后静置平衡20 min。液相色谱-三重四级杆串联质谱法鉴别黑果枸杞中主要以矮牵牛素类花青素为主(占97.96%),黑果枸杞特有的混合花青素平均摩尔质量为912.7 g/mol,平均摩尔消光系数为29591 L/(mol·cm)。pH示差法改进后能够满足方法学验证要求,固体样品和液体样品最低检出限分别为28.2 mg/100 g、0.282 mg/100 mL。方法改进后花青素提取增长率均大于20%,静置平衡20 min后单次检测结果精密度小于0.3%。以矮牵牛素类花青素代替矢车菊素-3-O-葡萄糖苷计算花青素含量平均提高了2.41倍,能真实地反映黑果枸杞及其制品中花青素的含量。展开更多
为满足不同种类食品对大豆分离蛋白(soybean protein isolate,SPI)不同功能性的需求,本研究利用红外光谱快速采集70组不同pH值处理后SPI的数据,探讨pH值变化对SPI结构含量的影响。使用均值中心化、多元散射校正、标准正态变量变换和归...为满足不同种类食品对大豆分离蛋白(soybean protein isolate,SPI)不同功能性的需求,本研究利用红外光谱快速采集70组不同pH值处理后SPI的数据,探讨pH值变化对SPI结构含量的影响。使用均值中心化、多元散射校正、标准正态变量变换和归一化算法对红外光谱数据进行预处理,基于二维相关红外光谱提取特征波段,再利用偏最小二乘(partial least square,PLS)法和算术优化算法-随机森林(arithmetic optimization algorithm-random forests,AOA-RF)建立不同pH值条件下SPI结构及含量的预测模型。结果表明,经均值中心化和多元散射校正结合处理后,α-螺旋、β-折叠、β-转角和无规卷曲模型的相对标准偏差分别为1.29%、1.60%、1.37%、7.28%,两者结合对光谱数据的预处理效果最佳。预测α-螺旋和β-折叠含量最优模型为AOA-RF(特征波段),校正集决定系数为0.9350和0.9266,预测集决定系数为0.8568和0.8701;预测β-转角和无规卷曲含量最优模型为PLS(特征波段),校正集决定系数为0.9154和0.8817,预测集决定系数为0.8913和0.7843。本研究结果可为工业生产过程中产品质量快速检测和工艺条件控制提供理论支撑。展开更多
基金This work was supported by the Special Funds for the Major State Basic Research Projects G19990650 in China,also supported by the Science and Technology Commission of Shanghai Municipality via projects 025258036 and 02ZE14031.
文摘The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in near-neutral pH solutions was transgranular at different temperatures and applied potentials with the feature of quasi-cleavage. The pH value of the solution decreased with increasing the addition of CO2, which increased the susceptibility to SCC. SCC susceptibility increased as the applied potential moved towards the cathodic direction, suggesting that hydrogen induced cracking (HIC) dominated the cracking process at cathodic potentials. The slight decrease of pH values with decreasing temperature of the solution increased the susceptibility to SCC, which attributed to the change of solubility of CO2 in the solution at different temperatures. The propagating directions of SCC cracks were different at different potentials. At rather negative cathodic potentials, the cracks were almost perpendicular to the tensile axis, while at free corrosion potential and near anodic potentials, cracks were nearly at 45 degree, and in the range of moderate cathodic potentials both propagating directions could be observed.
基金This work was supported by the Special Funds for the Major State Basic Research Projects in China(No.G19990650)also supported by the Science and Technology Comm is—sion of Shanghai Municipality(Projects Nos.025258036 and 02ZE14031
文摘The cracking behaviour of X-70 pipeline steel in near-neutral pH solutions was studied under different modes of cyclic loading. The crack propagation process of X-70 pipeline steel under low frequency cyclic loading condition was controlled mainly by stress corrosion cracking (SCC) mechanism. Under mixed-mode cyclic loading, both higher tensile stress and shear stress made cracks easier to propagate. Applied cathodic potentials and high content of carbon dioxide in solutions also promoted the propagation of cracks. The propagation directions of cracks were different under different cyclic loading conditions. Under mode I (pure tensile stress) cyclic loading condition, cracks were straight and perpendicular to the tensile stress axis, while under mixed-mode 1/111 (tensile/shear stress) cyclic loading,cracks were sinuous and did not propagate in the direction perpendicular to the main tensile stress axis. Under the mixed-mode cyclic loading, cracks were much easier to propagate, suggesting that shear stress intensified the role of tensile stress. In addition, shear stress promoted the interaction between cracks, resulting in easier coalescence of cracks.
基金supported by the National Natural Science Foundation of China (Grant No. 51025104)
文摘Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute (API) X80 pipeline steel applied in the 2nd West-East (;as Pipeline project with and without preload. The results show that cracks could initiate and propagate in X80 pipeline steel in near-neutral pH environment under a constant load condition. The life of crack initiation and propagation increased with decreasing applied stress. Preload did not change its corrosion behavior obviously. However, preload reduced the time for crack initiation.
文摘为满足不同种类食品对大豆分离蛋白(soybean protein isolate,SPI)不同功能性的需求,本研究利用红外光谱快速采集70组不同pH值处理后SPI的数据,探讨pH值变化对SPI结构含量的影响。使用均值中心化、多元散射校正、标准正态变量变换和归一化算法对红外光谱数据进行预处理,基于二维相关红外光谱提取特征波段,再利用偏最小二乘(partial least square,PLS)法和算术优化算法-随机森林(arithmetic optimization algorithm-random forests,AOA-RF)建立不同pH值条件下SPI结构及含量的预测模型。结果表明,经均值中心化和多元散射校正结合处理后,α-螺旋、β-折叠、β-转角和无规卷曲模型的相对标准偏差分别为1.29%、1.60%、1.37%、7.28%,两者结合对光谱数据的预处理效果最佳。预测α-螺旋和β-折叠含量最优模型为AOA-RF(特征波段),校正集决定系数为0.9350和0.9266,预测集决定系数为0.8568和0.8701;预测β-转角和无规卷曲含量最优模型为PLS(特征波段),校正集决定系数为0.9154和0.8817,预测集决定系数为0.8913和0.7843。本研究结果可为工业生产过程中产品质量快速检测和工艺条件控制提供理论支撑。