The repair of bone tissue damage is a complex process that is well-orchestrated in time and space,a focus and difficulty in orthopedic treatment.In recent years,the success of mesenchymal stem cells(MSCs)-mediated bon...The repair of bone tissue damage is a complex process that is well-orchestrated in time and space,a focus and difficulty in orthopedic treatment.In recent years,the success of mesenchymal stem cells(MSCs)-mediated bone repair in clinical trials of large-area bone defects and bone necrosis has made it a candidate in bone tissue repair engineering and regenerative medicine.MSCs are closely related to macrophages.On one hand,MSCs regulate the immune regulatory function by influencing macrophages proliferation,infiltration,and phenotype polarization,while also affecting the osteoclasts differentiation of macrophages.On the other hand,macrophages activate MSCs and mediate the multilineage differentiation of MSCs by regulating the immune microenvironment.The cross-talk between MSCs and macrophages plays a crucial role in regulating the immune system and in promoting tissue regeneration.Making full use of the relationship between MSCs and macrophages will enhance the efficacy of MSCs therapy in bone tissue repair,and will also provide a reference for further application of MSCs in other diseases.展开更多
The experimental research, presented in this study, focuses on athletic tests with the purpose to highlight the elastic deformations of the bones of the lower limbs, intending to verify whether the manually treated an...The experimental research, presented in this study, focuses on athletic tests with the purpose to highlight the elastic deformations of the bones of the lower limbs, intending to verify whether the manually treated anatomical structure increases in elasticity, becoming able to accumulate more energy in the loading phase, to then release it in the final phase of the thrust. Introduction: Too often neglected, the bone tissue is capable of deforming. The deformation has a key role in the cushioning and dissipation of stress, a function that is hindered in the event of fascial tension, which will consequently fall on other structures used for the same purpose (Discs, menisci, cartilage, …). Structures that, in the event of increased mechanical stress, could undergo degeneration, inflammation, and injury. Materials and Method: Randomized double-blind selection of 38 people, 18 in the treatment group and 20 in the control group, men and women, aged between 16 and 35, who have been part, for at least one year, of a sports club, with a large space dedicated to jumping in its training program, have been divided into two groups: the treatment group, which was treated to increase the performance of the jump and the control group subjected to mild manual pressures, without any intention. Results: The treatment group had an increase in Standing Long Jump (SLJ) for 3.67% (p Conclusions: This study has shown that an osteopathic manipulative treatment, aimed at increasing jumping performance, can increase the performance of the SLJ.展开更多
Bone is a complex but orderly mineralized tissue with hydroxyapatite(HA)as the inorganic phase and collagen as the organic phase.Inspired by natural bone tissues,HA-mineralized hydrogels have been widely designed and ...Bone is a complex but orderly mineralized tissue with hydroxyapatite(HA)as the inorganic phase and collagen as the organic phase.Inspired by natural bone tissues,HA-mineralized hydrogels have been widely designed and used in bone tissue engineering.HA is majorly utilized for the treatment of bone defects because of its excellent osteoconduction and bone inductivity.Hydrogel is a three-dimensional hydrophilic network structure with similar properties to the extracellular matrix(ECM).The combination of HA and hydrogels produces a new hybrid material that could effectively promote osteointegration and accelerate the healing of bone defects.In this review,the structure and growth of bone and the common strategies used to prepare HA were briefly introduced.Importantly,we discussed the fabrication of HA mineralized hydrogels from simple blending to in situ mineralization.We hope this review can provide a reference for the development of bone repair hydrogels.展开更多
Identifying an effective way to promote bone regeneration for patients who suffer from bone defects is urgently demanded.In recent years,mesenchymal stem cells(MSCs)have drawed wide attention in bone regeneration.Besi...Identifying an effective way to promote bone regeneration for patients who suffer from bone defects is urgently demanded.In recent years,mesenchymal stem cells(MSCs)have drawed wide attention in bone regeneration.Besides,several studies have indicated the secretions of MSCs,especially exosomes,play a vital role in bone regeneration process.Exosomes can transfer“cargos”of proteins,RNA,DNA,lipids,to regulate fate of recipient cells by affecting their proliferation,differentiation,migration and gene expression.In this paper,the application of MSCs-derived exosomes in bone tissue engineering is reviewed,and the potential therapeutic role of exosome microRNA in bone regeneration is emphasized.展开更多
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactiveβ...Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactiveβ- tricalcium phosphate (β-TCP) coatings were prepared on and the biodegradation mechanism was simply evaluated the porous Mg to further improve its biocompatibility, in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β- TCP coated porous Mg, which indicates that theβ-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.展开更多
The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In v...The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In vitro, DBM and bone marrow stromal cell (BMSC) from rabbits were co-cultured for 3-7 days and subjected to HE staining, and a series of histomorphological observations were performed under phase-contrast microscopy and scanning electron microscopy (SEM). In vivo the mixture of DBM/BMSC co-cultured for 3 days was planted into one side of muscules sacrospinalis of rabbits, and the DBM without BMSC was planted into other side as control. Specimens were collected at postoperative week 1, 2 and 4, and subjected to HE staining, and observed under SEM. The results showed during culture in vitro, the BMSCs adherent to the wall of DBM grew, proliferated and had secretive activity. The in vivo experiment revealed that BMSCs and undifferentiated mesenchymal cells in the perivascular region invaded gradually and proliferated together in DBM/BMSC group, and colony-forming units of chondrocytes were found. Osteoblasts, trabecular bone and medullary cavity appeared. The inflammatory reaction around muscles almost disappeared at the second weeks. In pure DBM group, the similar changes appeared from the surface of the DBM to center, and the volume of total regenerate bones was less than the DBM/BMSC group at the same time. The results indicated that the mixture of DBM and BMSC had good biocompatibility and ectopic induced osteogenic activity.展开更多
A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-( PEG-Asp )n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- ( PEG-Asp )n cop...A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-( PEG-Asp )n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- ( PEG-Asp )n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide( DLLA) and glycolide( GA ) with Aspartic acid ( Asp )-Polyethylene glycol(PEG) alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-( PEG- Asp)n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid (naSBF). Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- ( PEG-Asp )n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- ( PEG-Asp ) n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-( PEG- Asp )n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.展开更多
Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate (CAP) biomaterials/scaffolds are of special interest as they share chemical/crystallographic simila...Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate (CAP) biomaterials/scaffolds are of special interest as they share chemical/crystallographic similarities to inorganic components of bone. Three applications of nano-CaP are discussed in this review: nanostructured calcium phosphate cement (CPC); nano-CaP composites; and nano-CaP coatings. The interactions between stem cells and nano-CaP are highlighted, including cell attachment, orientation/ morphology, differentiation and in vivo bone regeneration. Several trends can be seen: (i) nano-CaP biomaterials support stem cell attachment/proliferation and induce osteogenic differentiation, in some cases even without osteogenic supplements; (ii) the influence of nano-CaP surface patterns on cell alignment is not prominent due to non-uniform distribution of nano-crystals; (iii) nano-CaP can achieve better bone regeneration than conventional CaP biomaterials; (iv) combining stem cells with nano-CaP accelerates bone regeneration, the effect of which can be further enhanced by growth factors; and (v) cell microencapsulation in nano-CaP scaffolds is promising for bone tissue engineering. These understandings would help researchers to further uncover the underlying mechanisms and interactions in nano-CaP stem cell constructs in vitro and in vivo, tailor nano-CaP composite construct design and stem cell type selection to enhance cell function and bone regeneration, and translate laboratory findings to clinical treatments.展开更多
Interconnectivity is the key characteristic of bone tissue engineering scaffold modulating cell migration,blood vessels invasion and transport of nutrient and waste.However,efforts and understanding of the interconnec...Interconnectivity is the key characteristic of bone tissue engineering scaffold modulating cell migration,blood vessels invasion and transport of nutrient and waste.However,efforts and understanding of the interconnectivity of porous Mg is limited due to the diverse architectures of pore struts and pore size distribution of Mg scaffold systems.In this work,biomimetic hierarchical porous Mg scaffolds with tailored interconnectivity as well as pore size distribution were prepared by template replication of infiltration casting.Mg scaffold with better interconnectivity showed lower mechanical strength.Enlarging interconnected pores would enhance the interconnectivity of the whole scaffold and reduce the change of ion concentration,pH value and osmolality of the degradation microenvironment due to the lower specific surface area.Nevertheless,the degradation rates of five tested Mg scaffolds were no different because of the same geometry of strut unit.Direct cell culture and evaluation of cell density at both sides of four typical Mg scaffolds indicated that cell migration through hierarchical porous Mg scaffolds could be enhanced by not only bigger interconnected pore size but also larger main pore size.In summary,design of interconnectivity in terms of pore size distribution could regulate mechanical strength,microenvironment in cell culture condition and cell migration potential,and beyond that it shows great potential for personalized therapy which could facilitate the regeneration process.展开更多
The effects of vitamin D on osteoblast mineralization are well documented. Reports of the effects of vitamin D on osteoclasts, however, are conflicting, showing both inhibition and stimulation. Finding that resorbing ...The effects of vitamin D on osteoblast mineralization are well documented. Reports of the effects of vitamin D on osteoclasts, however, are conflicting, showing both inhibition and stimulation. Finding that resorbing osteoclasts in human bone express vitamin D receptor (VDR), we examined their response to different concentrations of 25-hydroxy vitamin D3 [25(OH)D3] (100 or 500 nmol·L^-1) and 1,25-dihydroxy vitamin D3 [1,25(OH)2D3] (0.1 or 0.5 nmol·L^-1) metabolites in cell cultures. Specifically, CD14+ monocytes were cultured in charcoal-stripped serum in the presence of receptor activator of nuclear factor kappa-B ligand (RANKL) and macrophage colony-stimulating factor (M-CSF). Tartrate-resistant acid phosphatase (TRAP) histochemical staining assays and dentine resorption analysis were used to identify the size and number of osteoclast cells, number of nuclei per cell and resorption activity. The expression of VDR was detected in human bone tissue (ex vivo) by immunohistochemistry and in vitro cell cultures by western blotting. Quantitative reverse transcription-PCR (qRT-PCR) was used to determine the level of expression of vitamin D-related genes in response to vitamin D metabolites. VDR-related genes during osteoclastogenesis, shown by qRT-PCR, was stimulated in response to 500 nmol·L^-1 of 25(OH)D3 and 0.1-0.5 nmol·L^-1 of 1,25(OH)2D3, upregulating cytochrome P450 family 27 subfamily B member I (CYP27B1) and cytochrome P450 family 24 subfamily A member I (CYP24A1). Osteoclast fusion transcripts transmembrane 7 subfamily member 4 (tm7sf4) and nuclear factor of activated T-cell cytoplasmic 1 (nfatcl) where downregulated in response to vitamin D metabolites. Osteoclast number and resorption activity were also increased. Both 25(OH)D3 and 1,25(OH)2D3 reduced osteoclast size and number when co-treated with RANKL and M-CSF. The evidence for VDR expression in resorbing osteoclasts in vivo and low-dose effects of 1,25(OH)2D3 on osteoclasts in vitro may therefore provide insight into the effects of clinical vitamin D treatments, further providing a counterpoint to the high-dose effects reported from in vitro experiments.展开更多
BACKGROUND Bone tissue engineering is an area of continued interest within orthopaedic surgery,as it promises to create implantable bone substitute materials that obviate the need for autologous bone graft.Recently,ox...BACKGROUND Bone tissue engineering is an area of continued interest within orthopaedic surgery,as it promises to create implantable bone substitute materials that obviate the need for autologous bone graft.Recently,oxysterols–oxygenated derivatives of cholesterol-have been proposed as a novel class of osteoinductive small molecules for bone tissue engineering.Here,we present the first systematic review of the in vivo evidence describing the potential therapeutic utility of oxysterols for bone tissue engineering.AIM To systematically review the available literature examining the effect of oxysterols on in vivo bone formation.METHODS We conducted a systematic review of the literature following PRISMA guidelines.Using the PubMed/MEDLINE,Embase,and Web of Science databases,we queried all publications in the English-language literature investigating the effect of oxysterols on in vivo bone formation.Articles were screened for eligibility using PICOS criteria and assessed for potential bias using an expanded version of the SYRCLE Risk of Bias assessment tool.All full-text articles examining the effect of oxysterols on in vivo bone formation were included.Extracted data included:Animal species,surgical/defect model,description of therapeutic and control treatments,and method for assessing bone growth.Primary outcome was fusion rate for spinal fusion models and percent bone regeneration for critical-sized defect models.Data were tabulated and described by both surgical/defect model and oxysterol employed.Additionally,data from all included studies were aggregated to posit the mechanism by which oxysterols may mediate in vivo bone formation.RESULTS Our search identified 267 unique articles,of which 27 underwent full-text review.Thirteen studies(all preclinical)met our inclusion/exclusion criteria.Of the 13 included studies,5 employed spinal fusion models,2 employed critical-sized alveolar defect models,and 6 employed critical-sized calvarial defect models.Based upon SYRCLE criteria,the included studies were found to possess an overall“unclear risk of bias”;54%of studies reported treatment randomization and 38%reported blinding at any level.Overall,seven unique oxysterols were evaluated:20(S)-hydroxycholesterol,22(R)-hydroxycholesterol,22(S)-hydroxycholesterol,Oxy4/Oxy34,Oxy18,Oxy21/Oxy133,and Oxy49.All had statistically significant in vivo osteoinductive properties,with Oxy4/Oxy34,Oxy21/Oxy133,and Oxy49 showing a dose-dependent effect in some cases.In the eight studies that directly compared oxysterols to rhBMP-2-treated animals,similar rates of bone growth occurred in the two groups.Biochemical investigation of these effects suggests that they may be primarily mediated by direct activation of Smoothened in the Hedgehog signaling pathway.CONCLUSION Present preclinical evidence suggests oxysterols significantly augment in vivo bone formation.However,clinical trials are necessary to determine which have the greatest therapeutic potential for orthopaedic surgery patients.展开更多
The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary cha...The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary challenges that must be addressed.For example,although bredigite(Br)has shown great potential for application in bone tissue engineering,it easily fails in replacement.In the present work,these challenges are addressed by reinforcing the Br matrix with nanosheets of graphene oxide(rGO)that have been reduced by bovine serum albumin(BSA)in order to enhance the mechanical properties and biological behavior.The reduction of graphene oxide by BSA improves the water stability of the nanosheets and provides an electrostatic interaction between theBSA-rGO nanosheets and theBr particles.The high thermal conductivity of theBSA-rGO nanosheets decreases the porosity of the Br by transferring heat to the core of the tablet.Furthermore,the addition of BSA-rGO nanosheets into the Br matrix enhances the adhesion of G-292 cells on the surface of the tablets.These findings suggest that the tablet consisting of BSA-rGO-reinforced Br has encouraging potential for application in bone tissue engineering.展开更多
Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechan...Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechanical and biological properties, in order to mimic the natural tissue, these properties are directly related to the architecture and their degree of porosity, as well as the size of their pores and their interconnectivity. In this perspective, the 3D printing stands out, where the structure is obtained layer by layer, according to a predetermined computational model which provides a greater control of architecture and scaffold geometry and overcomes, in this way, the limitations of traditional techniques of scaffolds manufacturing. In this way, the objective of this seminar is to present the state of the art of the polymer scaffolds produced by 3D printing and applied to bone tissue regeneration, highlighting the advantages and limitations of this process.展开更多
A novel method of designing and preparing bone tissue engineering scaffolds with controllable porous structure of both macro channels and micro pores was proposed. The CAD software UG NX3.0 was used to design the macr...A novel method of designing and preparing bone tissue engineering scaffolds with controllable porous structure of both macro channels and micro pores was proposed. The CAD software UG NX3.0 was used to design the macro channels' shape, size and distribution. By integrating rapid prototyping and traditional porogen technique, the macro channels and micro pores were formed respectively. The size, shape and quantity of micro pores were controlled by porogen particulates. The sintered β-TCP porous scaffolds possessed connective macro channels of approximately 500 μm and micro pores of 200-400 μm. The porosity and connectivity of micro pores became higher with the increase of porogen ratio, while the mechanical properties weakened. The average porosity and compressive strength offl-TCP scaffolds prepared with porogen ratio of 60wt% were 78.12% and 0.2983 MPa, respectively. The cells' adhesion ratio of scaffolds was 67.43%. The ALP activity, OCN content and cells micro morphology indicated that cells grew and proliferated well on the scaffolds.展开更多
The customized implants which are composed of polycaprolactone( PCL) and strontium substituted nanohydroxyapatite( SrHA) were fabricated successfully by using fused deposition modeling( FDM),which is a simple 3 D prin...The customized implants which are composed of polycaprolactone( PCL) and strontium substituted nanohydroxyapatite( SrHA) were fabricated successfully by using fused deposition modeling( FDM),which is a simple 3 D printing technology for fabricating personalized products. The physical and chemical properties of composite scaffolds were characterized by transmission electron microscopy( TEM), Fourier transform infrared spectroscopy( FTIR), X-Ray diffraction( XRD) and inductively coupled plasma-atomic emission spectroscopy( ICPAES). The results suggested that strontium element was successfully doped into nanohydroxyapatite and all scaffolds showed the homogeneous network structure. Furthermore, the in vitro biocompatibility of the scaffolds was evaluated by cell counting kit-8( CCK-8) assay. The data indicated that the prepared scaffolds exhibited excellent biocompatibility to bone marrow mesenchymal stem cells( BMSCs). Besides,strontium element can be released from PCL-SrHA scaffolds in a sustained manner. Therefore,the 3 D printing PCL-SrHA scaffolds hold great potential for bone tissue engineering.展开更多
The combination of micro-carriers and polymer scaffolds as promising bone grafts have attracted considerable interest in recent decades.The poly(L-lactic acid)/poly(lactic-co-glycolic acid)/polycaprolactone(PLLA/PLGA/...The combination of micro-carriers and polymer scaffolds as promising bone grafts have attracted considerable interest in recent decades.The poly(L-lactic acid)/poly(lactic-co-glycolic acid)/polycaprolactone(PLLA/PLGA/PCL)composite scaffold with porous structure was fabricated by thermally induced phase separation(TIPS).Dexamethasone(DEX)was incorporated into PLGA microspheres and then loaded on the PLLA/PLGA/PCL scaffoldtopreparethedesiredcompositescaffold.The physicochemical properties of the prepared composite scaffold were characterized.The morphology of rat bone marrow mesenchymal stem cells(BMSCs)grown on scaffolds was observed using scanning electron microscope(SEM)and fluorescence microscope.The resultsshowedthatthePLLA/PLGA/PCLscaffoldhad interconnected macropores and biomimetic nanofibrous structure.In addition,DEX can be released from scaffold in a sustained manner.More importantly,DEX loaded composite scaffold can effectively support the proliferation of BMSCs as indicated by fluorescence observation and cell proliferation assay.The results suggested that the prepared PLLA/PLGA/PCL composite scaffold incorporating drug-loaded PLGA microspheres could hold great potential for bone tissue engineering applications.展开更多
The limited bioactivity of scaffold materials is an important factor that restricts the development of bone tissue engineering.Wnt3a activates the classicWnt/β-catenin signaling pathway which effects bone growth and ...The limited bioactivity of scaffold materials is an important factor that restricts the development of bone tissue engineering.Wnt3a activates the classicWnt/β-catenin signaling pathway which effects bone growth and development by the accumulation ofβ-catenin in the nucleus.In this study,we fabricated 3D printed PCL scaffold with Wnt3a-induced murine bone marrow-derived stromal cell line ST2 decellularized matrix(Wnt3a-ST2-dCM-PCL)and ST2 decellularized matrix(ST2-dCM-PCL)by freeze-thaw cycle and DNase decellularization treatment which efficiently decellularized>90%DNA while preserved most protein.Compared to ST2-dCM-PCL,Wnt3a-ST2-dCM-PCL significantly enhanced newly-seeded ST2 proliferation,osteogenic differentiation and upregulated osteogenic marker genes alkaline phosphatase(Alp),Runx2,type I collagen(Col 1)and osteocalcin(Ocn)mRNA expression.After 14 days of osteogenic induction,Wnt3a-ST2-dCM-PCL promoted ST2 mineralization.These results demonstrated that Wnt3a-induced ST2 decellularized matrix improve scaffold materials’osteoinductivity and osteoconductivity.展开更多
Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called s...Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs.These are utilized to attach the right cells and then grow them.Rapid prototyping appears to be the most promising technology due to its high level of precision and control.Bone tissue replacement“scaffolding”is a common theme discussed in this article.The fused deposition technique was used to construct our scaffold,and a polymer called polylactic acids and soybean oil resin were used to construct our samples.The samples were then divided into two groups;the first group was left without immersion in the simulated body fluid and served as a control for comparison.The second group was immersed in the simulated body fluid.The results of the Field Emission Scanning Electron Microscope(FESEM),Energy Dispersive X-ray Spectroscopy(EDX)and X-ray diffraction(XRD)were utilized to interpret the surface attachment to ions,elements,and compounds,giving us a new perspective on scaffold architecture.In this study,an innovative method has been used to print therapeutic scaffold that combines fused deposition three-dimensional printing with ultraviolet curing to create a high-quality biodegradable polymeric scaffold.Finally,the results demonstrate that adding soybean oil resin to the PLA increased ion attachment to the surface while also attracting tricalcium phosphate formation on the surface of the scaffold,which is highly promising in bone tissue replacement.In conclusion,the soybean oil resin,which is new in the field of bone tissue engineering,shows magnificent characteristics and is a good replacement biopolymer that replaces many ceramic and polymeric materials used in this field that have poor morphological characteristics.展开更多
Scaffolds are three-dimensional biocompatible structures that can mimic the properties of the extracellular matrix (ECM) of a given tissue, like mechanical support and bioactivity, which provides a platform for cellul...Scaffolds are three-dimensional biocompatible structures that can mimic the properties of the extracellular matrix (ECM) of a given tissue, like mechanical support and bioactivity, which provides a platform for cellular adherence, proliferation and differentiation. Consequently, scaffolds are frequently used in tissue engineering with the intention of assisting the regeneration of a damaged tissue, and a major application in bone regeneration. An ideal scaffold needs to be biodegradable, biocompatible, and needs to match the biomechanical properties of bone. Polymers are widely used in this field because they fulfil the first two requirements. However, no polymeric material can achieve mechanical properties similar to the bone. For that reason, polymeric nanocomposites, which consist of ceramic/metallic nanoparticles dispersed in a polymer matrix, are being considered for bone scaffold fabrication in order to overcome this problem, since nanoparticles are known to improve composite mechanical strength, and enhance other properties.展开更多
基金Supported by the National Key Research and Development Program of China,No.2023YFC2508806Key Research and Development Project in Henan Province,No.231111310500+4 种基金Young Elite Scientists Sponsorship Program by CAST,No.2021-QNRC2-A06Scientific Research Project of Henan Zhongyuan Medical Science and Technology Innovation and Development Foundation,No.ZYYC2023ZDYouth Science Award Project of the Provincial-Level Joint Fund for Science and Technology Research and Development Project in Henan Province,No.225200810084Special Project on Training Top Talents in Traditional Chinese Medicine in Henan Province,No.2022ZYBJ242023 Hunan University of Chinese Medicine Postgraduate Innovation Project,No.2023CX64。
文摘The repair of bone tissue damage is a complex process that is well-orchestrated in time and space,a focus and difficulty in orthopedic treatment.In recent years,the success of mesenchymal stem cells(MSCs)-mediated bone repair in clinical trials of large-area bone defects and bone necrosis has made it a candidate in bone tissue repair engineering and regenerative medicine.MSCs are closely related to macrophages.On one hand,MSCs regulate the immune regulatory function by influencing macrophages proliferation,infiltration,and phenotype polarization,while also affecting the osteoclasts differentiation of macrophages.On the other hand,macrophages activate MSCs and mediate the multilineage differentiation of MSCs by regulating the immune microenvironment.The cross-talk between MSCs and macrophages plays a crucial role in regulating the immune system and in promoting tissue regeneration.Making full use of the relationship between MSCs and macrophages will enhance the efficacy of MSCs therapy in bone tissue repair,and will also provide a reference for further application of MSCs in other diseases.
文摘The experimental research, presented in this study, focuses on athletic tests with the purpose to highlight the elastic deformations of the bones of the lower limbs, intending to verify whether the manually treated anatomical structure increases in elasticity, becoming able to accumulate more energy in the loading phase, to then release it in the final phase of the thrust. Introduction: Too often neglected, the bone tissue is capable of deforming. The deformation has a key role in the cushioning and dissipation of stress, a function that is hindered in the event of fascial tension, which will consequently fall on other structures used for the same purpose (Discs, menisci, cartilage, …). Structures that, in the event of increased mechanical stress, could undergo degeneration, inflammation, and injury. Materials and Method: Randomized double-blind selection of 38 people, 18 in the treatment group and 20 in the control group, men and women, aged between 16 and 35, who have been part, for at least one year, of a sports club, with a large space dedicated to jumping in its training program, have been divided into two groups: the treatment group, which was treated to increase the performance of the jump and the control group subjected to mild manual pressures, without any intention. Results: The treatment group had an increase in Standing Long Jump (SLJ) for 3.67% (p Conclusions: This study has shown that an osteopathic manipulative treatment, aimed at increasing jumping performance, can increase the performance of the SLJ.
基金supported by the National Natural Science Foundation of China(Grant no:12272253)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(Grant no:2021SX-AT008,2021SX-AT009).
文摘Bone is a complex but orderly mineralized tissue with hydroxyapatite(HA)as the inorganic phase and collagen as the organic phase.Inspired by natural bone tissues,HA-mineralized hydrogels have been widely designed and used in bone tissue engineering.HA is majorly utilized for the treatment of bone defects because of its excellent osteoconduction and bone inductivity.Hydrogel is a three-dimensional hydrophilic network structure with similar properties to the extracellular matrix(ECM).The combination of HA and hydrogels produces a new hybrid material that could effectively promote osteointegration and accelerate the healing of bone defects.In this review,the structure and growth of bone and the common strategies used to prepare HA were briefly introduced.Importantly,we discussed the fabrication of HA mineralized hydrogels from simple blending to in situ mineralization.We hope this review can provide a reference for the development of bone repair hydrogels.
文摘Identifying an effective way to promote bone regeneration for patients who suffer from bone defects is urgently demanded.In recent years,mesenchymal stem cells(MSCs)have drawed wide attention in bone regeneration.Besides,several studies have indicated the secretions of MSCs,especially exosomes,play a vital role in bone regeneration process.Exosomes can transfer“cargos”of proteins,RNA,DNA,lipids,to regulate fate of recipient cells by affecting their proliferation,differentiation,migration and gene expression.In this paper,the application of MSCs-derived exosomes in bone tissue engineering is reviewed,and the potential therapeutic role of exosome microRNA in bone regeneration is emphasized.
基金supported by Chinese Academy of Sciences (The Applied Research of Bioactive Bone Implantation Materials, No. KGCX2-YW-207)
文摘Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactiveβ- tricalcium phosphate (β-TCP) coatings were prepared on and the biodegradation mechanism was simply evaluated the porous Mg to further improve its biocompatibility, in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β- TCP coated porous Mg, which indicates that theβ-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
文摘The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In vitro, DBM and bone marrow stromal cell (BMSC) from rabbits were co-cultured for 3-7 days and subjected to HE staining, and a series of histomorphological observations were performed under phase-contrast microscopy and scanning electron microscopy (SEM). In vivo the mixture of DBM/BMSC co-cultured for 3 days was planted into one side of muscules sacrospinalis of rabbits, and the DBM without BMSC was planted into other side as control. Specimens were collected at postoperative week 1, 2 and 4, and subjected to HE staining, and observed under SEM. The results showed during culture in vitro, the BMSCs adherent to the wall of DBM grew, proliferated and had secretive activity. The in vivo experiment revealed that BMSCs and undifferentiated mesenchymal cells in the perivascular region invaded gradually and proliferated together in DBM/BMSC group, and colony-forming units of chondrocytes were found. Osteoblasts, trabecular bone and medullary cavity appeared. The inflammatory reaction around muscles almost disappeared at the second weeks. In pure DBM group, the similar changes appeared from the surface of the DBM to center, and the volume of total regenerate bones was less than the DBM/BMSC group at the same time. The results indicated that the mixture of DBM and BMSC had good biocompatibility and ectopic induced osteogenic activity.
文摘A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-( PEG-Asp )n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- ( PEG-Asp )n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide( DLLA) and glycolide( GA ) with Aspartic acid ( Asp )-Polyethylene glycol(PEG) alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-( PEG- Asp)n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid (naSBF). Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- ( PEG-Asp )n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- ( PEG-Asp ) n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-( PEG- Asp )n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.
基金supported by NIH R01 DE14190 and R21 DE22625 (HX)National Science Foundation of China 31100695 and 31328008 (LZ), 81401794 (PW)Maryland Stem Cell Research Fund and University of Maryland School of Dentistry
文摘Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate (CAP) biomaterials/scaffolds are of special interest as they share chemical/crystallographic similarities to inorganic components of bone. Three applications of nano-CaP are discussed in this review: nanostructured calcium phosphate cement (CPC); nano-CaP composites; and nano-CaP coatings. The interactions between stem cells and nano-CaP are highlighted, including cell attachment, orientation/ morphology, differentiation and in vivo bone regeneration. Several trends can be seen: (i) nano-CaP biomaterials support stem cell attachment/proliferation and induce osteogenic differentiation, in some cases even without osteogenic supplements; (ii) the influence of nano-CaP surface patterns on cell alignment is not prominent due to non-uniform distribution of nano-crystals; (iii) nano-CaP can achieve better bone regeneration than conventional CaP biomaterials; (iv) combining stem cells with nano-CaP accelerates bone regeneration, the effect of which can be further enhanced by growth factors; and (v) cell microencapsulation in nano-CaP scaffolds is promising for bone tissue engineering. These understandings would help researchers to further uncover the underlying mechanisms and interactions in nano-CaP stem cell constructs in vitro and in vivo, tailor nano-CaP composite construct design and stem cell type selection to enhance cell function and bone regeneration, and translate laboratory findings to clinical treatments.
基金supported by grants from Shenzhen Key Medical Subject(No.SZXK023)Shenzhen“SanMing”Project of Medicine(No.SZSM201612092)+3 种基金Shenzhen Research and Development Projects(No.JCYJ20170307111755218)Guangdong Basic and Applied Basic Research Foundation(No.2019A1515011290)National Key Research and Development Program of China(No.2016YFC1102103)China Postdoctoral Science Foundation(No.2020M672756)
文摘Interconnectivity is the key characteristic of bone tissue engineering scaffold modulating cell migration,blood vessels invasion and transport of nutrient and waste.However,efforts and understanding of the interconnectivity of porous Mg is limited due to the diverse architectures of pore struts and pore size distribution of Mg scaffold systems.In this work,biomimetic hierarchical porous Mg scaffolds with tailored interconnectivity as well as pore size distribution were prepared by template replication of infiltration casting.Mg scaffold with better interconnectivity showed lower mechanical strength.Enlarging interconnected pores would enhance the interconnectivity of the whole scaffold and reduce the change of ion concentration,pH value and osmolality of the degradation microenvironment due to the lower specific surface area.Nevertheless,the degradation rates of five tested Mg scaffolds were no different because of the same geometry of strut unit.Direct cell culture and evaluation of cell density at both sides of four typical Mg scaffolds indicated that cell migration through hierarchical porous Mg scaffolds could be enhanced by not only bigger interconnected pore size but also larger main pore size.In summary,design of interconnectivity in terms of pore size distribution could regulate mechanical strength,microenvironment in cell culture condition and cell migration potential,and beyond that it shows great potential for personalized therapy which could facilitate the regeneration process.
基金financial support from Orthopaedic Research UK (P 470)Arthritis Research UK (grant 20299 and Oxford EOTC)
文摘The effects of vitamin D on osteoblast mineralization are well documented. Reports of the effects of vitamin D on osteoclasts, however, are conflicting, showing both inhibition and stimulation. Finding that resorbing osteoclasts in human bone express vitamin D receptor (VDR), we examined their response to different concentrations of 25-hydroxy vitamin D3 [25(OH)D3] (100 or 500 nmol·L^-1) and 1,25-dihydroxy vitamin D3 [1,25(OH)2D3] (0.1 or 0.5 nmol·L^-1) metabolites in cell cultures. Specifically, CD14+ monocytes were cultured in charcoal-stripped serum in the presence of receptor activator of nuclear factor kappa-B ligand (RANKL) and macrophage colony-stimulating factor (M-CSF). Tartrate-resistant acid phosphatase (TRAP) histochemical staining assays and dentine resorption analysis were used to identify the size and number of osteoclast cells, number of nuclei per cell and resorption activity. The expression of VDR was detected in human bone tissue (ex vivo) by immunohistochemistry and in vitro cell cultures by western blotting. Quantitative reverse transcription-PCR (qRT-PCR) was used to determine the level of expression of vitamin D-related genes in response to vitamin D metabolites. VDR-related genes during osteoclastogenesis, shown by qRT-PCR, was stimulated in response to 500 nmol·L^-1 of 25(OH)D3 and 0.1-0.5 nmol·L^-1 of 1,25(OH)2D3, upregulating cytochrome P450 family 27 subfamily B member I (CYP27B1) and cytochrome P450 family 24 subfamily A member I (CYP24A1). Osteoclast fusion transcripts transmembrane 7 subfamily member 4 (tm7sf4) and nuclear factor of activated T-cell cytoplasmic 1 (nfatcl) where downregulated in response to vitamin D metabolites. Osteoclast number and resorption activity were also increased. Both 25(OH)D3 and 1,25(OH)2D3 reduced osteoclast size and number when co-treated with RANKL and M-CSF. The evidence for VDR expression in resorbing osteoclasts in vivo and low-dose effects of 1,25(OH)2D3 on osteoclasts in vitro may therefore provide insight into the effects of clinical vitamin D treatments, further providing a counterpoint to the high-dose effects reported from in vitro experiments.
文摘BACKGROUND Bone tissue engineering is an area of continued interest within orthopaedic surgery,as it promises to create implantable bone substitute materials that obviate the need for autologous bone graft.Recently,oxysterols–oxygenated derivatives of cholesterol-have been proposed as a novel class of osteoinductive small molecules for bone tissue engineering.Here,we present the first systematic review of the in vivo evidence describing the potential therapeutic utility of oxysterols for bone tissue engineering.AIM To systematically review the available literature examining the effect of oxysterols on in vivo bone formation.METHODS We conducted a systematic review of the literature following PRISMA guidelines.Using the PubMed/MEDLINE,Embase,and Web of Science databases,we queried all publications in the English-language literature investigating the effect of oxysterols on in vivo bone formation.Articles were screened for eligibility using PICOS criteria and assessed for potential bias using an expanded version of the SYRCLE Risk of Bias assessment tool.All full-text articles examining the effect of oxysterols on in vivo bone formation were included.Extracted data included:Animal species,surgical/defect model,description of therapeutic and control treatments,and method for assessing bone growth.Primary outcome was fusion rate for spinal fusion models and percent bone regeneration for critical-sized defect models.Data were tabulated and described by both surgical/defect model and oxysterol employed.Additionally,data from all included studies were aggregated to posit the mechanism by which oxysterols may mediate in vivo bone formation.RESULTS Our search identified 267 unique articles,of which 27 underwent full-text review.Thirteen studies(all preclinical)met our inclusion/exclusion criteria.Of the 13 included studies,5 employed spinal fusion models,2 employed critical-sized alveolar defect models,and 6 employed critical-sized calvarial defect models.Based upon SYRCLE criteria,the included studies were found to possess an overall“unclear risk of bias”;54%of studies reported treatment randomization and 38%reported blinding at any level.Overall,seven unique oxysterols were evaluated:20(S)-hydroxycholesterol,22(R)-hydroxycholesterol,22(S)-hydroxycholesterol,Oxy4/Oxy34,Oxy18,Oxy21/Oxy133,and Oxy49.All had statistically significant in vivo osteoinductive properties,with Oxy4/Oxy34,Oxy21/Oxy133,and Oxy49 showing a dose-dependent effect in some cases.In the eight studies that directly compared oxysterols to rhBMP-2-treated animals,similar rates of bone growth occurred in the two groups.Biochemical investigation of these effects suggests that they may be primarily mediated by direct activation of Smoothened in the Hedgehog signaling pathway.CONCLUSION Present preclinical evidence suggests oxysterols significantly augment in vivo bone formation.However,clinical trials are necessary to determine which have the greatest therapeutic potential for orthopaedic surgery patients.
基金Thiswork is financially supported by IranUniversity of Science and Technology(IUST)and Motamed Cancer Institute(ACECR).
文摘The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary challenges that must be addressed.For example,although bredigite(Br)has shown great potential for application in bone tissue engineering,it easily fails in replacement.In the present work,these challenges are addressed by reinforcing the Br matrix with nanosheets of graphene oxide(rGO)that have been reduced by bovine serum albumin(BSA)in order to enhance the mechanical properties and biological behavior.The reduction of graphene oxide by BSA improves the water stability of the nanosheets and provides an electrostatic interaction between theBSA-rGO nanosheets and theBr particles.The high thermal conductivity of theBSA-rGO nanosheets decreases the porosity of the Br by transferring heat to the core of the tablet.Furthermore,the addition of BSA-rGO nanosheets into the Br matrix enhances the adhesion of G-292 cells on the surface of the tablets.These findings suggest that the tablet consisting of BSA-rGO-reinforced Br has encouraging potential for application in bone tissue engineering.
文摘Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechanical and biological properties, in order to mimic the natural tissue, these properties are directly related to the architecture and their degree of porosity, as well as the size of their pores and their interconnectivity. In this perspective, the 3D printing stands out, where the structure is obtained layer by layer, according to a predetermined computational model which provides a greater control of architecture and scaffold geometry and overcomes, in this way, the limitations of traditional techniques of scaffolds manufacturing. In this way, the objective of this seminar is to present the state of the art of the polymer scaffolds produced by 3D printing and applied to bone tissue regeneration, highlighting the advantages and limitations of this process.
基金Funded by the Postdoctor Science Fund of China (No. 20070410715) Shanghai Excellent Youth Special Fund (No. 17014)
文摘A novel method of designing and preparing bone tissue engineering scaffolds with controllable porous structure of both macro channels and micro pores was proposed. The CAD software UG NX3.0 was used to design the macro channels' shape, size and distribution. By integrating rapid prototyping and traditional porogen technique, the macro channels and micro pores were formed respectively. The size, shape and quantity of micro pores were controlled by porogen particulates. The sintered β-TCP porous scaffolds possessed connective macro channels of approximately 500 μm and micro pores of 200-400 μm. The porosity and connectivity of micro pores became higher with the increase of porogen ratio, while the mechanical properties weakened. The average porosity and compressive strength offl-TCP scaffolds prepared with porogen ratio of 60wt% were 78.12% and 0.2983 MPa, respectively. The cells' adhesion ratio of scaffolds was 67.43%. The ALP activity, OCN content and cells micro morphology indicated that cells grew and proliferated well on the scaffolds.
基金National Natural Science Foundations of China(Nos.31771048,31570984,31271028)International Cooperation Fund of the Science and Technology Commission of Shanghai Municipality,China(No.15540723400)+1 种基金Innovation Foundation of Donghua University,China(No.EG2017012)Biomedical Textile Materials Science and Technology(111 Project),China(No.B07024)
文摘The customized implants which are composed of polycaprolactone( PCL) and strontium substituted nanohydroxyapatite( SrHA) were fabricated successfully by using fused deposition modeling( FDM),which is a simple 3 D printing technology for fabricating personalized products. The physical and chemical properties of composite scaffolds were characterized by transmission electron microscopy( TEM), Fourier transform infrared spectroscopy( FTIR), X-Ray diffraction( XRD) and inductively coupled plasma-atomic emission spectroscopy( ICPAES). The results suggested that strontium element was successfully doped into nanohydroxyapatite and all scaffolds showed the homogeneous network structure. Furthermore, the in vitro biocompatibility of the scaffolds was evaluated by cell counting kit-8( CCK-8) assay. The data indicated that the prepared scaffolds exhibited excellent biocompatibility to bone marrow mesenchymal stem cells( BMSCs). Besides,strontium element can be released from PCL-SrHA scaffolds in a sustained manner. Therefore,the 3 D printing PCL-SrHA scaffolds hold great potential for bone tissue engineering.
基金National Natural Science Foundations of China(Nos.31271028,31570984)Innovation Program of Shanghai Municipal Education Commission,China(No.13ZZ051)+2 种基金International Cooperation Fund of the Science and Technology Commission of Shanghai Municipality,China(No.15540723400)Open Foundation of State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,China(No.LK1416)“111 Project” Biomedical Textile Materials Science and Technology,China(No.B07024)
文摘The combination of micro-carriers and polymer scaffolds as promising bone grafts have attracted considerable interest in recent decades.The poly(L-lactic acid)/poly(lactic-co-glycolic acid)/polycaprolactone(PLLA/PLGA/PCL)composite scaffold with porous structure was fabricated by thermally induced phase separation(TIPS).Dexamethasone(DEX)was incorporated into PLGA microspheres and then loaded on the PLLA/PLGA/PCL scaffoldtopreparethedesiredcompositescaffold.The physicochemical properties of the prepared composite scaffold were characterized.The morphology of rat bone marrow mesenchymal stem cells(BMSCs)grown on scaffolds was observed using scanning electron microscope(SEM)and fluorescence microscope.The resultsshowedthatthePLLA/PLGA/PCLscaffoldhad interconnected macropores and biomimetic nanofibrous structure.In addition,DEX can be released from scaffold in a sustained manner.More importantly,DEX loaded composite scaffold can effectively support the proliferation of BMSCs as indicated by fluorescence observation and cell proliferation assay.The results suggested that the prepared PLLA/PLGA/PCL composite scaffold incorporating drug-loaded PLGA microspheres could hold great potential for bone tissue engineering applications.
基金This work was supported by the National Natural Science Foundation of China(Grant No.U1601220)the National Natural Science Foundation of China(Grant No.82002310)+1 种基金the Chongqing Postgraduate Research and Innovation Project(Grant No.CYB20167)the Chongqing Postdoctoral Science Foundation(Grant No.csts2019jcyj-bsh0068).
文摘The limited bioactivity of scaffold materials is an important factor that restricts the development of bone tissue engineering.Wnt3a activates the classicWnt/β-catenin signaling pathway which effects bone growth and development by the accumulation ofβ-catenin in the nucleus.In this study,we fabricated 3D printed PCL scaffold with Wnt3a-induced murine bone marrow-derived stromal cell line ST2 decellularized matrix(Wnt3a-ST2-dCM-PCL)and ST2 decellularized matrix(ST2-dCM-PCL)by freeze-thaw cycle and DNase decellularization treatment which efficiently decellularized>90%DNA while preserved most protein.Compared to ST2-dCM-PCL,Wnt3a-ST2-dCM-PCL significantly enhanced newly-seeded ST2 proliferation,osteogenic differentiation and upregulated osteogenic marker genes alkaline phosphatase(Alp),Runx2,type I collagen(Col 1)and osteocalcin(Ocn)mRNA expression.After 14 days of osteogenic induction,Wnt3a-ST2-dCM-PCL promoted ST2 mineralization.These results demonstrated that Wnt3a-induced ST2 decellularized matrix improve scaffold materials’osteoinductivity and osteoconductivity.
文摘Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs.These are utilized to attach the right cells and then grow them.Rapid prototyping appears to be the most promising technology due to its high level of precision and control.Bone tissue replacement“scaffolding”is a common theme discussed in this article.The fused deposition technique was used to construct our scaffold,and a polymer called polylactic acids and soybean oil resin were used to construct our samples.The samples were then divided into two groups;the first group was left without immersion in the simulated body fluid and served as a control for comparison.The second group was immersed in the simulated body fluid.The results of the Field Emission Scanning Electron Microscope(FESEM),Energy Dispersive X-ray Spectroscopy(EDX)and X-ray diffraction(XRD)were utilized to interpret the surface attachment to ions,elements,and compounds,giving us a new perspective on scaffold architecture.In this study,an innovative method has been used to print therapeutic scaffold that combines fused deposition three-dimensional printing with ultraviolet curing to create a high-quality biodegradable polymeric scaffold.Finally,the results demonstrate that adding soybean oil resin to the PLA increased ion attachment to the surface while also attracting tricalcium phosphate formation on the surface of the scaffold,which is highly promising in bone tissue replacement.In conclusion,the soybean oil resin,which is new in the field of bone tissue engineering,shows magnificent characteristics and is a good replacement biopolymer that replaces many ceramic and polymeric materials used in this field that have poor morphological characteristics.
文摘Scaffolds are three-dimensional biocompatible structures that can mimic the properties of the extracellular matrix (ECM) of a given tissue, like mechanical support and bioactivity, which provides a platform for cellular adherence, proliferation and differentiation. Consequently, scaffolds are frequently used in tissue engineering with the intention of assisting the regeneration of a damaged tissue, and a major application in bone regeneration. An ideal scaffold needs to be biodegradable, biocompatible, and needs to match the biomechanical properties of bone. Polymers are widely used in this field because they fulfil the first two requirements. However, no polymeric material can achieve mechanical properties similar to the bone. For that reason, polymeric nanocomposites, which consist of ceramic/metallic nanoparticles dispersed in a polymer matrix, are being considered for bone scaffold fabrication in order to overcome this problem, since nanoparticles are known to improve composite mechanical strength, and enhance other properties.