Terrestrial laser scanning(TLS) is a useful technology for rock mass characterization. A laser scanner produces a massive point cloud of a scanned area, such as an exposed rock surface in an underground tunnel,with mi...Terrestrial laser scanning(TLS) is a useful technology for rock mass characterization. A laser scanner produces a massive point cloud of a scanned area, such as an exposed rock surface in an underground tunnel,with millimeter precision. The density of the point cloud depends on several parameters from both the TLS operational conditions and the specifications of the project, such as the resolution and the quality of the laser scan, the section of the tunnel, the distance between scanning stations, and the purpose of the scans. One purpose of the scan can be to characterize the rock mass and statistically analyze the discontinuities that compose it for further discontinuous modeling. In these instances, additional data processing and a detailed analysis should be performed on the point cloud to extract the parameters to define a discrete fracture network(DFN) for each discontinuity set. I-site studio is a point cloud processing software that allows users to edit and process laser scans. This software contains a set of geotechnical analysis tools that assist engineers during the structural mapping process, allowing for greater and more representative data regarding the structural information of the rock mass, which may be used for generating DFNs. This paper presents the procedures used during a laser scan for characterizing discontinuities in an underground limestone mine and the results of the scan as applied to the generation of DFNs for further discontinuous modeling.展开更多
The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture cont...The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture content of the yarn roll with a standard deviation of 1.58% in the range of 0% to 90.00%.According to the actual size of the yarn,the yarn roll simulation model is established.The microwave attenuation variations arising from the changes in the conductivity and dielectric constant of the wet cone yarn from1.8 GHz to 5.0 GHz frequency are obtained by ultra-wideband antenna.The measured data are analyzed using the BP neural network.The result shows that it is a non-contact and online method to solve the moisture content of the yarn in the wide moisture content range.展开更多
基金funded by the NIOSH Mining Program under Contract No. 200-2016-91300
文摘Terrestrial laser scanning(TLS) is a useful technology for rock mass characterization. A laser scanner produces a massive point cloud of a scanned area, such as an exposed rock surface in an underground tunnel,with millimeter precision. The density of the point cloud depends on several parameters from both the TLS operational conditions and the specifications of the project, such as the resolution and the quality of the laser scan, the section of the tunnel, the distance between scanning stations, and the purpose of the scans. One purpose of the scan can be to characterize the rock mass and statistically analyze the discontinuities that compose it for further discontinuous modeling. In these instances, additional data processing and a detailed analysis should be performed on the point cloud to extract the parameters to define a discrete fracture network(DFN) for each discontinuity set. I-site studio is a point cloud processing software that allows users to edit and process laser scans. This software contains a set of geotechnical analysis tools that assist engineers during the structural mapping process, allowing for greater and more representative data regarding the structural information of the rock mass, which may be used for generating DFNs. This paper presents the procedures used during a laser scan for characterizing discontinuities in an underground limestone mine and the results of the scan as applied to the generation of DFNs for further discontinuous modeling.
基金The Science&Technology Innovation Action Plan of International Science and Technology Cooperation Projects from SSTEC(No.14510711600)
文摘The moisture content of yarn and fabric is an important factor in textiles industry.A novel microwave method used for material moisture content measurements is described in this paper.It can estimate the moisture content of the yarn roll with a standard deviation of 1.58% in the range of 0% to 90.00%.According to the actual size of the yarn,the yarn roll simulation model is established.The microwave attenuation variations arising from the changes in the conductivity and dielectric constant of the wet cone yarn from1.8 GHz to 5.0 GHz frequency are obtained by ultra-wideband antenna.The measured data are analyzed using the BP neural network.The result shows that it is a non-contact and online method to solve the moisture content of the yarn in the wide moisture content range.
