Network-based products detection system:congestion control and self diagnosis

The problems that arise while developing a real-time distributed information-processing software system are studied. And based on the TCP/IP protocols and socket, for its facility in client/server （C/S） model networking programming, a prototype is designed for data transmission between the server and clients and it is applied on an on-line products automatic detection system. The probability analysis on network congestion was also made. A proper mechanism based on the ARCC （adapted RTT congestion control） algorithm is employed for detecting and resolving congestion, the purpose of which is mainly to achieve congestion avoidance under the particular conditions in this network-based system and reach the desired performance. Furthermore, a method is proposed for a client to diagnose automatically the connection status between the server and the client and to re-connect to the server when the disconnection is detected.

Data Center Traffic Scheduling Strategy for Minimization Congestion and Quality of Service Guaranteeing

According to Cisco’s Internet Report 2020 white paper,there will be 29.3 billion connected devices worldwide by 2023,up from 18.4 billion in 2018.5G connections will generate nearly three times more traffic than 4G connections.While bringing a boom to the network,it also presents unprecedented challenges in terms of flow forwarding decisions.The path assignment mechanism used in traditional traffic schedulingmethods tends to cause local network congestion caused by the concentration of elephant flows,resulting in unbalanced network load and degraded quality of service.Using the centralized control of software-defined networks,this study proposes a data center traffic scheduling strategy for minimization congestion and quality of service guaranteeing(MCQG).The ideal transmission path is selected for data flows while considering the network congestion rate and quality of service.Different traffic scheduling strategies are used according to the characteristics of different service types in data centers.Reroute scheduling for elephant flows that tend to cause local congestion.The path evaluation function is formed by the maximum link utilization on the path,the number of elephant flows and the time delay,and the fast merit-seeking capability of the sparrow search algorithm is used to find the path with the lowest actual link overhead as the rerouting path for the elephant flows.It is used to reduce the possibility of local network congestion occurrence.Equal cost multi-path(ECMP)protocols with faster response time are used to schedulemouse flows with shorter duration.Used to guarantee the quality of service of the network.To achieve isolated transmission of various types of data streams.The experimental results show that the proposed strategy has higher throughput,better network load balancing,and better robustness compared to ECMP under different traffic models.In addition,because it can fully utilize the resources in the network,MCQG also outperforms another traffic scheduling strategy that does rerouting for elephant flows(namely Hedera).Compared withECMPandHedera,MCQGimproves average throughput by 11.73%and 4.29%,and normalized total throughput by 6.74%and 2.64%,respectively;MCQG improves link utilization by 23.25%and 15.07%;in addition,the average round-trip delay and packet loss rate fluctuate significantly less than the two compared strategies.

Stabilizing First-Order Controllers for TCP/AQM Networks

In this paper, the authors investigate the overload problem of a congested router in TCP （Transmission Control Protocol） networks, with a design of an AQM （Active Queue Management） controller based on control theory. The model of TCP/AQM is converted into a second-order system with time delay, the stability of the closed-loop AQM system is described in terms of a characteristic quasi-polynomial. The authors focus on the synthesis of first-order AQM controller. The authors＇ approach consists of determining the stabilizing regions in the parameter space of the first-order controller, then choosing controller＇s parameters within these regions. Finally, the authors illustrate the proposed methodology with an example and simulations using NS-2 simulator.

Practical approach to determining traffic congestion propagation boundary due to traffic incidents

A practical approach for predicting the congestion boundary due to traffic incidents was proposed. Based on the kinematic wave theory and Van Aerde single-regime flow model, a model for estimating the congestion propagation speed for the basic road segment was developed. Historical traffic flow data were used to analyze the time variant characteristics of the urban traffic flow for each road type. Then, the saturation flow rate was used for analyzing the impact of the traffic incident on the traversing traffic flow at the congestion area. The base congestion propagation speed for each road type was calculated based on field data, which were provided by the remote traffic microwave sensors(RTMS), floating car data(FCD) system and screen line survey. According to a comparative analysis of the congestion propagation speed, it is found that the expressway, major arterial, minor arterial and collector are decreasingly influenced by the traffic incident. Subsequently, the impact of turning movements at intersections on the congestion propagation was considered. The turning ratio was adopted to represent the impact of turning movements, and afterward the corresponding propagation pattern at intersections was analyzed. Finally, an implementation system was designed on a geographic information system(GIS) platform to display the characteristics of the congestion propagation over the network. The validation results show that the proposed approach is able to capture the congestion propagation properties in the actual road network.

Analytical Modeling of a Multi-queue Nodes Network Router

This paper presents the derivation of an analytical model for a multi-queue nodes network router, which is referred to as the multi-queue nodes （mQN） model. In this model, expressions are derived to calculate two performance metrics, namely, the queue node and system utilization factors. In order to demonstrate the flexibility and effectiveness of the mQN model in analyzing the performance of an mQN network router, two scenarios are performed. These scenarios investigated the variation of queue nodes and system utilization factors against queue nodes dropping probability for various system sizes and packets arrival routing probabilities. The performed scenarios demonstrated that the mQN analytical model is more flexible and effective when compared with experimental tests and computer simulations in assessing the performance of an mQN network router.

A congestion alleviated scheme in optical burst switching network

An optical burst switching （OBS） network platform is established with a ring topology of three nodes. A congestion Mleviated scheme using advanced token protocol and wavelength tunable receivers is demon- strated to optimize the network platform. Experimental results testify that this scheme can resist collision at the level of 0.1% congestion rate.

Congestion warning method based on the Internet of vehicles and community discovery of complex networks

The traffic congestion occurs frequently in urban areas, while most existing solutions only take effects after congesting. In this paper, a congestion warning method is proposed based on the Internet of vehicles（IOV） and community discovery of complex networks. The communities in complex network model of traffic flow reflect the local aggregation of vehicles in the traffic system, and it is used to predict the upcoming congestion. The real-time information of vehicles on the roads is obtained from the IOV, which includes the locations, speeds and orientations of vehicles. Then the vehicles are mapped into nodes of network, the links between nodes are determined by the correlations between vehicles in terms of location and speed. The complex network model of traffic flow is hereby established. The communities in this complex network are discovered by fast Newman（FN） algorithm, and the congestion warnings are generated according to the communities selected by scale and density. This method can detect the tendency of traffic aggregation and provide warnings before congestion occurs. The simulations show that the method proposed in this paper is effective and practicable, and makes it possible to take action before traffic congestion.

A Dynamic Flow-Regulation Algorithm for Networks Overload Control

In this paper,a dynamic flow-regulation algorithm-oriented network overload control is proposed.It can proportion-ally distribute the load between the high-degree nodes and the low-degree nodes.According to the theoretical analysis,the net-work transmission performance of the proposed algorithm is in inverse proportion to the usage rate of the high-degree nodes.Simulations show that the new algorithm is more flexible and can enhance the network capability in most circumstances compared with the shortest path routing algorithm.Moreover,the compari-son with the efficient routing algorism also reveals the prominent performance of the new algorithm.