A statistical work has been done to collect the composition ranges of Ni-Mn-Ga alloys exhibiting different structures and martensite start temperature （M,）, large magnetostrain or the co-existence of magnetic and st...A statistical work has been done to collect the composition ranges of Ni-Mn-Ga alloys exhibiting different structures and martensite start temperature （M,）, large magnetostrain or the co-existence of magnetic and structural transitions. The alloys with five-layered （5M）, seven-layered （7M） modulated and non-modulated （T） martensitic structures were mapped in the graph. An empirical formula has been presented to reflect the effect of elements nickel （Ni ）, manganese （ Mn ） and gallium （Ga）, on the martensite start temperature （M3）. The martensitic structure is sensitive to the composition and the martensitic transformation temperature is most drastically affected by the Ni content. The alloys with large magnetostrain or co-existence effect of the magnetic and structural transitions were also listed in a limited area.展开更多
The effects of microamount additions of RE (Tb, Sm) on martensitic transition, the magnetic-field-induced strain and the bending strength of highly textured polycrystalline Ni_(48)Mn_(33)Ga_(19) alloy were investigate...The effects of microamount additions of RE (Tb, Sm) on martensitic transition, the magnetic-field-induced strain and the bending strength of highly textured polycrystalline Ni_(48)Mn_(33)Ga_(19) alloy were investigated. The experimental results show that the addition of RE elements decreases the martensitic transformation temperature and the Curie temperature. But the bending strength of Ni-Mn-Ga-RE (RE=Tb, Sm) alloys increases remarkably because of the grain refinement. As a result, Ni-Mn-Ga-RE alloys will be applied practically with higher reliability and stability due to favorable plasticity and toughness. In addition, the replacement of small amounts Ga by Tb or Sm decreases the magnetic-field-induced strain of the alloys at room temperature.展开更多
Results of investigation of the temperature dependence of magnetization of Ni2.08Mn0.96Ga0.96 alloy in the magnetic fields of various intensities are reported. An abrupt change in magnetization at transformation of lo...Results of investigation of the temperature dependence of magnetization of Ni2.08Mn0.96Ga0.96 alloy in the magnetic fields of various intensities are reported. An abrupt change in magnetization at transformation of low temperature phase to the high temperature one is observed. Magnetization increases during the phase transition in the magnetic field having intensity below 500 kA/m and decreases at higher intensities. The explanation is based on zigzag configuration of domains in twinned structure. In the Curie temperature region the ferromagnetic ? paramagnetic phase transition occurs sharply at low field strength, while at higher field strength the transition is smooth. It is concluded that the increase in flatness of the curve σ = f (T) and the increase of ferromagnetic state destruction temperature with increase of the intensity of the magnetic field is indicative of the main role of Mn in magnetization of the alloy.展开更多
The equilibrium lattice parameter, heat capacity, thermal expansion coefficient and bulk modulus of Ni2MnGa Heusler alloy are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） metho...The equilibrium lattice parameter, heat capacity, thermal expansion coefficient and bulk modulus of Ni2MnGa Heusler alloy are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） method as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus B and temperature T up to 800 K and obtain the relationship between bulk modulus B and pressure at different temperatures. It is found that the bulk modulus B increases monotonically with increasing pressure and decreases with increasing temperature. The pressure dependence of heat capacity Cv and thermal expansion α at various temperatures are also analysed. Finally, the Debye temperature of Ni2MnGa is determined from the non-equilibrium Gibbs function. Our calculated results are in excellent agreement with the experimental data.展开更多
Ferromagnetic Ni-Mn-Ga films were fabricated by depositing on MgO （001） substrates at temperatures from 673 K to 923 K. Microstructure, crystal structure, martensitic transformation behavior, and magnetic properties...Ferromagnetic Ni-Mn-Ga films were fabricated by depositing on MgO （001） substrates at temperatures from 673 K to 923 K. Microstructure, crystal structure, martensitic transformation behavior, and magnetic properties of the films were studied. With increasing deposition temperature, the surface morphology of the films transforms from granular to continu- ous. The martensitic transformation temperature is not dependent on deposition temperature; while transformation behavior is affected substantially by deposition temperature. X-ray analysis reveals that the film deposited at 873 K has a 7M marten- site phase, and its magnetization curve provides a typical step-increase, indicating the occurrence of magnetically induced reorientation （MIR）. In situ magnetic domain structure observation on the film deposited at 873 K reflects that the marten- sitic transformation could be divided into two periods： nucleation and growth, in the form of stripe domains. The MIR occurs at the temperature at which martensitic transformation starts, and the switching field increases with the decrease of temperature due to damped thermal activation. The magnetically induced martensitic transformation is related to the difference of magnetization between martensite and austenite. A shift of martensite temperature of dT/dH = 0.43 K/T is observed, consistent with the theoretical value, 0.41 K/T.展开更多
The hot deformation behavior of Ni48Mn31Ga21 alloy was studied by thermal simulation rolling technology. Microstructure evolution of the alloys under different rolling processes was studied by optical microscopy(OM) a...The hot deformation behavior of Ni48Mn31Ga21 alloy was studied by thermal simulation rolling technology. Microstructure evolution of the alloys under different rolling processes was studied by optical microscopy(OM) and X-ray diffractometry(XRD).The results show that, by thermal simulation pack rolling technology, textures appear in polycrystalline Ni48Mn31Ga21 alloy, and big cracks can be avoided under large deformation ratio. The rolling process with few passes and strong deformation makes Ni48Mn31Ga21 alloy obtain (202), (400) and (323) textures of martensitic variants more easily, especially (400) texture. Besides the interface between package materials and the Ni48Mn31Ga21 alloy is clear, which is beneficial for Ni48Mn31Ga21 alloy to separate from pack.展开更多
基金the National Natural Science Foundation of China （No. 50271002） New Century Program for Excellent Talents of Ministry of Education of China （No. 04-0165）.
文摘A statistical work has been done to collect the composition ranges of Ni-Mn-Ga alloys exhibiting different structures and martensite start temperature （M,）, large magnetostrain or the co-existence of magnetic and structural transitions. The alloys with five-layered （5M）, seven-layered （7M） modulated and non-modulated （T） martensitic structures were mapped in the graph. An empirical formula has been presented to reflect the effect of elements nickel （Ni ）, manganese （ Mn ） and gallium （Ga）, on the martensite start temperature （M3）. The martensitic structure is sensitive to the composition and the martensitic transformation temperature is most drastically affected by the Ni content. The alloys with large magnetostrain or co-existence effect of the magnetic and structural transitions were also listed in a limited area.
文摘The effects of microamount additions of RE (Tb, Sm) on martensitic transition, the magnetic-field-induced strain and the bending strength of highly textured polycrystalline Ni_(48)Mn_(33)Ga_(19) alloy were investigated. The experimental results show that the addition of RE elements decreases the martensitic transformation temperature and the Curie temperature. But the bending strength of Ni-Mn-Ga-RE (RE=Tb, Sm) alloys increases remarkably because of the grain refinement. As a result, Ni-Mn-Ga-RE alloys will be applied practically with higher reliability and stability due to favorable plasticity and toughness. In addition, the replacement of small amounts Ga by Tb or Sm decreases the magnetic-field-induced strain of the alloys at room temperature.
文摘Results of investigation of the temperature dependence of magnetization of Ni2.08Mn0.96Ga0.96 alloy in the magnetic fields of various intensities are reported. An abrupt change in magnetization at transformation of low temperature phase to the high temperature one is observed. Magnetization increases during the phase transition in the magnetic field having intensity below 500 kA/m and decreases at higher intensities. The explanation is based on zigzag configuration of domains in twinned structure. In the Curie temperature region the ferromagnetic ? paramagnetic phase transition occurs sharply at low field strength, while at higher field strength the transition is smooth. It is concluded that the increase in flatness of the curve σ = f (T) and the increase of ferromagnetic state destruction temperature with increase of the intensity of the magnetic field is indicative of the main role of Mn in magnetization of the alloy.
基金supported by the National Natural Science Foundation of China (Grant No 60777012)the Program for Science &Technology Innovation Talents in Universities of Henan Province of China (Grant No 2008HASTIT008) the Science and Technology Foundation of Henan Province, China (Grant No 082300410050)
文摘The equilibrium lattice parameter, heat capacity, thermal expansion coefficient and bulk modulus of Ni2MnGa Heusler alloy are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） method as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus B and temperature T up to 800 K and obtain the relationship between bulk modulus B and pressure at different temperatures. It is found that the bulk modulus B increases monotonically with increasing pressure and decreases with increasing temperature. The pressure dependence of heat capacity Cv and thermal expansion α at various temperatures are also analysed. Finally, the Debye temperature of Ni2MnGa is determined from the non-equilibrium Gibbs function. Our calculated results are in excellent agreement with the experimental data.
基金Project supported by the National Key Project of Fundamental Research of China (Grant No.2012CB932304)the National Natural Science Foundation of China (Grant No.50831006)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Ferromagnetic Ni-Mn-Ga films were fabricated by depositing on MgO （001） substrates at temperatures from 673 K to 923 K. Microstructure, crystal structure, martensitic transformation behavior, and magnetic properties of the films were studied. With increasing deposition temperature, the surface morphology of the films transforms from granular to continu- ous. The martensitic transformation temperature is not dependent on deposition temperature; while transformation behavior is affected substantially by deposition temperature. X-ray analysis reveals that the film deposited at 873 K has a 7M marten- site phase, and its magnetization curve provides a typical step-increase, indicating the occurrence of magnetically induced reorientation （MIR）. In situ magnetic domain structure observation on the film deposited at 873 K reflects that the marten- sitic transformation could be divided into two periods： nucleation and growth, in the form of stripe domains. The MIR occurs at the temperature at which martensitic transformation starts, and the switching field increases with the decrease of temperature due to damped thermal activation. The magnetically induced martensitic transformation is related to the difference of magnetization between martensite and austenite. A shift of martensite temperature of dT/dH = 0.43 K/T is observed, consistent with the theoretical value, 0.41 K/T.
基金Project(50501008) supported by the National Natural Science Foundation of China
文摘The hot deformation behavior of Ni48Mn31Ga21 alloy was studied by thermal simulation rolling technology. Microstructure evolution of the alloys under different rolling processes was studied by optical microscopy(OM) and X-ray diffractometry(XRD).The results show that, by thermal simulation pack rolling technology, textures appear in polycrystalline Ni48Mn31Ga21 alloy, and big cracks can be avoided under large deformation ratio. The rolling process with few passes and strong deformation makes Ni48Mn31Ga21 alloy obtain (202), (400) and (323) textures of martensitic variants more easily, especially (400) texture. Besides the interface between package materials and the Ni48Mn31Ga21 alloy is clear, which is beneficial for Ni48Mn31Ga21 alloy to separate from pack.
